Best sellers

Showing 1-128 of 128 item(s)

Royal Enfield - interceptor - side covers - black

Royal Enfield - interceptor - side covers - black 2

Interceptor / Continental GT 650

Side covers for Royal Enfield 650 Interceptor / Continental GT

Aluminium side covers for Royal Enfield 650 Interceptor / Continental GT. These aluminium side covers are designed and manufactured by our craftsmen at the workshop. It comes in place of the original plastic side panels of your Interceptor or Continental GT 650, and will highly improve its finish level. Available for Left or right side, comes with all...

View

Triumph

Engine protection for Triumph (2016-...)

€115.00

This sump guard / engine protection is manufactured out of stainless steel. It will give a stronger look to Triumph (2016-... - liquid-cooled). It's 1,5mm thick, and ensures a good protection to your engine against impacts and front wheel splashes. Available in Satin black or Brushed finish. It comes with all the necessary stainless steel screwing kit.

View

Moto Guzzi

Side Covers for Moto Guzzi V7 I & V7 II

€75.00

Easy to install, the cover replaces the original plastic side cover of your motorcycle. It enhances the finish of your Moto Guzzi. Sold individually, delivered with all the necessary stainless steel screws. Be sure to select both the left AND right sides if you want the pair.

View

Triumph

Side leather saddlebag for Triumph (2016)

€273.00

Side leather saddlebag for Triumph (2016-...). This saddlebag is handcrafted at our workshop in the same leather as our seats. It enables you to transport some stuff and gives a retro distinguished look to your bike. It's available in Aged brown, gold, black leather. Saddlebag measurements: 20cm x 20cm x 7cm. It comes mounting on a Brushed or Satin black...

View

Parts

Leather cable guides

€8.00

Leather cable guide. This strap enables you fasten your cables, or tie it together to your handlebars. If just like us, your motorcycle's finish is part of your obsessions, this cable guide is perfect for your project. Available in Aged brown, Black and Gold leather. Available in 80mm, 90mm, 115mm or 130mm length. Each strap is 20mm wide. Sold as a...

View

Plate support for Royal Enfield 650 Interceptor / Continental GT

Plate support for Royal Enfield 650 Interceptor / Continental GT 2

Interceptor / Continental GT 650

License plate holder for Royal Enfield 650 Interceptor / Continental GT

€168.00

License plate holder for original Royal Enfield 650 Interceptor / Continental GT mudguard. Equipped with a taillight (CE approved), license plate lightning, compatible wiring harness and included turn indicators brackets to be mounted on your upper shock absorber axles or the license plate holder on choice. The EU approved LED taillight comes with its...

View

Triumph

Classic Medium front mudguard for Triumph

€120.00

Classic Medium front mudguard for Triumph, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled so you can easily fit it on the Triumph model of your choice. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, brushed and ready to...

View

Triumph

Classic aluminum side covers for Triumph (2016)

€75.00

Classic side covers for liquid cooled Triumph (2016-...) designed and handcrafted in aluminum in our workshop in France. It replaces your original plastic side covers to bring a strongest look to your motorcycle, using noble material. Available for both left and right side. Comes with all the necessary stainless steel hardware. Available in Brushed or...

View

Moto Guzzi

Classic rear mudguard for Moto Guzzi V7 / V7 850

€300.00

Classic rear mudguard for Moto Guzzi V7 I, V7 II, V7 III and V7 850, manufactured out of stainless steel. Shorter than your original rear mudguard, it has an elegant raw look thanks to the molded edge at its end. You will still keep good protection against the rear wheel projections. Equipped with a LED taillight (CE approved for road use) with license...

View

Triumph

Headlight brackets for original headlight for Triumph (2016 )

€129.00

Headlight fixation brackets for Triumph original headlight (since 2016). This pair of lighthouse brackets come to replace the original ones and reveal the fork tubes. Suitable for the Triumph T120 / T100 Street Scrambler / Street Twin / Thruxton 1200 (since 2016) original headlights. The optional turn indicators brackets enable mount on the headlight...

View

Triumph

Rectifier bracket for Triumph (2016)

€45.00

Rectifier bracket for Triumph (2016-... - liquid-cooled). This bracket enables you to relocate your rectifier behind your engine oil cooler instead of the lower fork trees to lighten the front of your bike. Manufactured out of stainless steel laser cut. You'll be obliged to relocate your wiring harness under your gas tank. Comes with all the necessary...

Parts

Leather fork gaiters

€240.00

Pair of genuine leather fork gaiters. These 4, 5, 6 or 8 folds fork boots are handcrafted in France, and bring a touch of authenticity and exception to your motorcycle. It's water-repellent and especially designed to resist to an intensive use. Available in Aged brown, black, gold leather color. Diameter Ø41mm top and Ø63mm bottom. It comes in pairs with...

View

Long cables kit for Royal Enfield 650 Interceptor / Continental GT

Interceptor / Continental GT 650

Long cables kit for Royal Enfield 650 Interceptor / Continental GT

€33.16

Long cables kit for Royal Enfield 650 Interceptor / Continental GT. This kit includes a long front brake hose, a pair of throttle cables and a clutch cable, all compatible with your motorcycle. It enables you mount a wider handlebar on your Royal Enfield. Each part of the kit can be purchased separately. The choice of variant (2024 - now) corresponds...

View

Triumph

Front mudguard fixation brackets for Triumph (2016)

€45.00

Front mudguard fixation brackets for Triumph (2016-... - liquid-cooled) manufactured out of stainless steel. The fixation brackets enable you adjust the height of your front fender, while guiding the cables along the fork. It particularly useful if you change the diameter of your front wheel. Comes in pair, with stainless steel screws kit, without...

View

Wide Flat Track handlebar kit for Royal Enfield 650 Interceptor

Wide Flat Track handlebar kit for Royal Enfield 650 Interceptor 2

Interceptor / Continental GT 650

Flat Track handlebars kit for Royal Enfield 650 Interceptor

€299.00

Flat Track Handlebar Kit for Royal Enfield 650 Interceptor / Continental GT 650 (2018-present). This kit includes: - a wide Flat Track steel handlebar (brushed or polished finish) - an extended brake line - a pair of long throttle cables - a long clutch cable - a pair of ø22mm handlebar risers With a wider handlebar that has more pullback towards the...

View

Triumph

Relocated ignition switch control bracket for Triumph (2016)

€30.00

Ignition switch control relocation bracket for Triumph (2016-... - liquid-cooled). It enables to relocate the ignition switch control under the gas tank. Manufactured in inox laser cut. You'll be obliged to relocate your wiring harness under your gas tank. Comes with all the necessary stainless steel screwing. The relocation of your ignition switch...

Triumph

Short leather seat kit for Triumph (2016)

€1,290.00

Short leather seat kit for Triumph (2016-... - liquid-cooled). It enables you reduce the original seat length to get a more compact look and the elegance of a leather seat while keeping two seatings. It comes with: Machined aluminium short subframe system (no welding) Genuine short leather seat Stainless steel mudguard with plate holder and bates...

View

Triumph

Heritage rear mudguard for Triumph (2016 )

€360.00

Heritage rear mudguard for Triumph (2016 - liquid-cooled) manufactured out of stainless steel. It's shorter than your original mudguard, but it respect the original Triumph lines making it visually lighter, while keeping a good protection against the rear wheel projections. Equipped with a LED taillight (CE approved for road use) with integrated license...

View

Aluminium intake cover for Royal Enfield 650 Interceptor / Continental GT

Aluminium intake cover for Royal Enfield 650 Interceptor / Continental GT 2

Interceptor / Continental GT 650

Aluminium intake covers for Royal Enfield 650 Interceptor / Continental GT

€65.00

Pair of aluminium intake covers for Royal Enfield 650. These covers come in place of the original ones to give a better aesthetic look to your motorcycle. It comes by pair. It's available in Satin black and Brushed finish. It comes with all the necessary mounting hardware.

View

License plate holder for Triumph Bobber original mudguard (2017)

Bonneville Bobber (2017 -...)

License plate holder for Triumph Bobber original mudguard (2017)

€180.00

License plate holder for the original mudguard of the Triumph Bonneville Bobber (2017-...). This taillight / license plate support unit comes in place of the original part. It's equipped with an EU approved LED vintage taillight with LED integrated license plate lightning, a license plate triangle, a plug & play wiring harness, optional turn...

View

Triumph

Classic rear mudguard for Triumph (2016 )

€300.00

Classic rear mudguard for Triumph (2016 - liquid-cooled) manufactured out of stainless steel. Shorter than your original rear mudguard, it has an elegant raw look thanks to the molded edge at its end. You will still keep good protection against the rear wheel projections. Equipped with a LED Bates taillight (CE approved for road use) with license plate...

View

Home

T-shirt Welcome BAAK "Ivory"

€29.00

T-shirt "Welcome BAAK" Ivory. This t-shirt is THE essential basic of the collection. It's manufactured out of bio cotton and has a Slim cut. The BAAK logo is embroidered on the chest. It's marine blue color with the white BAAK logo. It's mixed, both Him and Her will proudly wear it. Size S is more suitable for a child aged 12-14

View

Moto Guzzi

Front turn indicators bracket for Moto Guzzi V7 / V9

€30.00

Front turn indicators fixation bracket for Moto Guzzi V7 and V9, simple, effective and very discreet. It's stainless steel laser cut and satin black powder coat painted. It gets assembled on the upper regulator screw of your motorcycle. Sold without blinkers.

View

Engine protection for Royal Enfield 650 Interceptor / Continental GT

Interceptor / Continental GT 650

Engine protection for Royal Enfield 650 Interceptor / Continental GT

€115.00

Engine protection / sump guard for Royal Enfield 650 Interceptor / Continental GT (2018-...). It will give a stronger look to Royal Enfield while protection the bottom of your engine against impacts and front wheels splashes. It's manufactured out of 1,5mm thick stainless steel. Available in Satin black or Brushed finish. It comes with all the necessary...

View

Classic rear mudguard for Royal Enfield 650 Interceptor / Continental GT

Interceptor / Continental GT 650

Classic rear mudguard for Royal Enfield 650 Interceptor / Continental GT

€300.00

Classic rear mudguard for Royal Enfield 650 Interceptor / Continental GT, manufactured out of stainless steel at our workshop in France. Shorter than your original rear mudguard, it has an elegant raw look thanks to the molded edge at its end. You will still keep good protection against the rear wheel projections. Equipped with a LED taillight (CE...

View

Home

T-shirt Welcome BAAK "Grey"

€29.00

T-shirt "Welcome BAAK" Grey. This t-shirt is THE essential basic of the collection. It's manufactured out of bio cotton and has a Slim cut. The BAAK logo is embroidered on the chest. It's grey color with the marine blue BAAK logo. It's mixed, both Him and Her will proudly wear it. Size S is more suitable for a child aged 12-14

View

Parts

Universal gas tank leather belt

€126.00

Universal leather gas tank strap / belt, fits with any gas tank with the cap on the side. It gives a distinguished look to your motorcycle tank and protects it from scratches. It comes wrapping your gas tank, is easy to assemble and is adjustable thanks to a metal buckle fastener. Maximum length 190cm, minimum length 107cm. This genuine leather tank...

View

Triumph

Engine protection for Triumph (pre-2016)

€115.00

Aluminium engine protection / sump guard for Triumph (pre-2016 - air-cooled), gives an aesthetic style to your motorcycle and a better protection to your engine. Easy to assemble, comes with stainless steel screws. This skid plate is made by BAAK Motocyclettes team at our workshop in France. We use it on most of our Triumph custom projects. Width : 170mm

View

Triumph

Side number panel for Triumph (2016)

€120.00

Currently unavailable for sale Side number panel for Triumph (2016-...) manufactured out of aluminium. The number plate is placed on a side aluminium cover that comes to replace the original cover, with all the necessary screwing system. Available for Right or Left side, with the side cover in Brushed or Satin black finish. Made in France

View

Parts

Leather Conditioner

€18.00

This leather conditioner is a nourishing milk. It penetrates and nourishes the leather. You can use it for your saddles but also for your other leather products : shoes, jackets, gloves, saddlebags, etc. It comes with all the seat we offer. Capacity : 100 ml.

Parts

Leather keychain

€24.00

This leather keychain is handcrafted by our craftsmen in the same leather from which we manufacture our seats, saddlebags, etc... Simple and elegant, just as our motorized creations. It's available in Brown, black, gold or chocolat leather. The BAAK logo is hot-pressed on the keychain. You can attach your keys to it thanks to the ring.

View

License plate holder triangle for Triumph Thruxton / Speed Twin 1200

Thruxton 1200 (2016 -...)

License plate holder triangle for Triumph Thruxton / Speed Twin 1200

€55.00

License plate holder triangle for rear fender eliminator kit of Triumph Thruxton 1200 or Speed Twin 1200 (2016-...). This support is dedicated to be assembled on the optional Rear fender removal kit offered by Triumph Motorcycles, or stands for a Short license plate holder for original rear fender on a Speed Twin. It enables you to remove the reflectors...

View

Home

T-shirt Welcome BAAK "Marine"

€29.00

T-shirt "Welcome BAAK" Marine blue. This t-shirt is THE essential basic of the collection. It's manufactured out of bio cotton and has a Slim cut. The BAAK logo is embroidered on the chest. It's marine blue color with the white BAAK logo. It's mixed, both Him and Her will proudly wear it. Size S is more suitable for a child aged 12-14

View

Triumph

Front turn indicators bracket for Triumph

€30.00

Front turn indicators bracket / support for Triumph is simple, effective and very discreet. It enables you relocate your turn indicators under the steering column. It's stainless steel laser cut and satin black powder coated. It's particularly suitable for our Rectifier bracket for Triumph, or can be tightened on the upper fixation of the oil cooling...

View

Bouchon plat de réservoir pour triumph 2

Parts

Flat fuel tank cap for Triumph

€58.00

Black finish only, without locking system. Made with a black anodized treatment for long-lasting durability and impeccable style. This product was carefully selected by the BAAK workshop team for its elegant look and superior quality. It is easily installed as a direct replacement for the original cap.

Triumph

Classic Mini front mudguard for Triumph

€108.00

Classic Mini front mudguard for Triumph, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. We drill holes on this mudguard according to the model of Triumph you choose. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black, brushed and...

View

Royal Enfield

Leather gas tank strap for Royal Enfield

€135.00

Leather gas tank strap / belt for Royal Enfield Bullet and Classic 500 (Euro IV and pre-Euro IV), Continental GT 535 and Interceptor / Continental GT 650. It gives a distinguished classic look to your motorcycle and protects your gas tank from scratches. The hole around the gas tank cap will be different depending on the model of motorcycle you choose....

View

Headlight brackets for original headlight for Interceptor 650

Interceptor / Continental GT 650

Headlight brackets for original headlight for Interceptor 650

€129.00

Headlight fixation brackets for Royal Enfield 650 Interceptor and Continental GT 650. This pair of headlight brackets is mounted to replace the original ones. Compatible with bulb or LED headlights. Suitable if you keep the original key switch. If you opt for our flat fork crown with relocated key switch, you can fit our small 60mm headlight brackets....

View

Triumph

Side leather saddlebag for Triumph (pre- 2016)

€273.00

Side leather saddlebag for Triumph (pre-2016 - air-cooled). This saddlebag is handcrafted in our workshop in the same leather as our seats. It enables you to transport some stuff and gives a retro distinguished look to your bike. It's available in Aged brown, gold, black leather. It comes mounting on a black satin painted aluminium plate that comes in...

View

Triumph

Classic aluminum side covers for Triumph (pre- 2016)

€75.00

Classic aluminum side covers for Triumph (before 2016 - air-cooled), available in Brushed or powder coated in Satin Black. It replaces your original plastic side covers. These parts will bring a strongest look to your motorcycle, using noble material while hiding the airbox. Comes with the necessary mounting bracket and hardware, available for right side...

View

Side leather saddlebag for Royal Enfield 650 Interceptor / Continental GT

Interceptor / Continental GT 650

Side leather saddlebag for Royal Enfield 650 Interceptor / Continental GT

€273.00

Side leather saddlebag for Royal Enfield 650 Interceptor / Continental GT (2018-...). This saddlebag is handcrafted at our workshop in the same leather as our seats. It enables you to transport some stuff and gives a retro distinguished look to your Royal Enfield. It's available in Aged brown, gold, black leather. Saddlebag measurements: 20cm x 20cm x...

View

Triumph

Relocated ignition switch control bracket kit for Triumph (pre- 2016)

€49.00

Relocated ignition switch control bracket for Triumph (pre-2016 - air-cooled). This simple ignition switch support enables you to relocate the ignition control between the fuel tank and the left carburetor. Fits on the right side on the injection models (EFI). It requires to move the wiring harness that is in your headlight, under the gas tank, without...

Triumph

Front mudguard fixation brackets for Triumph (pre- 2016)

€45.00

These stainless steel mudguard fixation bracket enables you to assemble the front fender of your choice on your Triumph Bonneville, Scrambler and Thruxton (before 2016 - air-cooled). They allow to adjust the height of the mudguard, it gets assembled on the original mudguard fixation. Product delivered by pairs.Made in France

Classic aluminum side covers for Triumph Speed Twin 1200 / Thruxton 1200

Home

Classic aluminum side covers for Triumph Speed Twin 1200 / Thruxton 1200

€75.00

View

Leather dye, perfect for motorcycle seats

Leather dye, perfect for motorcycle seats 2

Parts

Leather dye cream

€24.00

This leather dye cream is a maintenance solution. It penetrates the leather and gives it a deep black tint. You can use it for your saddles but also for any other leather product: shoes, jackets, gloves, saddlebags, etc. Capacity: 200 ml. It's available for Black, Gold, Brown and Ruby (red) leather.Should be applied with a cloth, mixed with our...

View

Triumph

Rectifier / turn indicators / horn bracket for Triumph (pre- 2016)

€49.00

This bracket enables you to relocate your rectifier, front turn indicators and horn on a Triumph (pre-2016 - air-cooled) below your steering column. It visually lightens the line of the front of your motorcycle by grouping these parts on one bracket. This bracket is 21,8cm wide and 12cm high. It get assembled in the original place of your horn, under the...

Parts

Exhaust wrap

€93.60

Here are 15 meters (or 49') of exhaust wrap, 5 cm wide (1'' & 31/32), to wrap up your exhaust system and get the BAD BOY look you're aiming at! For the black color thermal wrap, we highly recommend you to paint it with an high temperature paint so the color can resist over the months. Available in Black or Beige color. This is high quality part,...

View

Triumph

Big Body shock absorbers for Triumph (pre- 2016)

€711.60

We designed these aluminum shocks in order to give a stronger look and a better shocks absorption to the Triumph Bonneville, Thruxton and Scrambler 865. It's adjustable in hydraulic compression and rebound thanks to a single knob, which makes it really easy to use, even while riding. It's the largest shock absorbers you can find for these Triumph models...

View

Royal Enfield

Rear Brake Master Cylinder Protection for Royal Enfield 650 Interceptor

€36.00

Protect your rear brake master cylinder while adding an aesthetic touch to your Royal Enfield 650 with this robust and stylish protection. Available in a brushed or satin black finish, this inox protection is designed to withstand the elements and impacts.

View

Side leather saddlebag for Triumph Thruxton 1200 and Speed Twin

Side leather saddlebag for Triumph Thruxton 1200 and Speed Twin 2

Speed Twin 1200 (2019 -...)

Side leather saddlebag for Triumph Thruxton 1200 / Speed Twin 1200 (2016-...)

€273.00

Side leather saddlebag for Triumph Thruxton 1200 / Thruxton R / Speed Twin (2016-...). This side bag is handcrafted at our workshop using the same leather as on our seats. It enables you transport some stuff and gives a retro distinguished look to your Triumph. It's available in Aged brown, gold, black leather. Saddlebag measurements: 20cm x 20cm x 7cm....

View

Triumph

License plate holder kit for Triumph Thruxton 1200 / Speed Twin 1200

€210.00

Fender Eliminator Kit for Triumph Thruxton 1200 and Speed Twin Euro 4 / Euro 5 (2016 – …). This satin black aluminum undertray visually lightens the rear of your Triumph and gives it a more radical look. This kit includes a LED taillight (CE approved) with license plate lightning, a license plate holder on choice (side or classic position), turn...

View

Classic Mini front mudguard for Royal Enfield 650 Interceptor / Continental GT

Interceptor / Continental GT 650

Classic Mini front mudguard for Royal Enfield 650 Interceptor / Continental GT

€108.00

Classic Mini front mudguard for Royal Enfield 650 Interceptor / Continental GT (2018-...), manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. We drill holes on this mudguard so it fits your motorcycle. This mudguard is available without or with risers kit (+10mm) if you want to mount a bigger tire on the...

View

License plate holder for Royal Enfield Classic / Bullet original mudguard

Bullet / Classic (2008- ..)

License plate holder for Royal Enfield Classic / Bullet original mudguard

€168.00

Discreet license plate holder for Royal Enfield Classic / Bullet 500 original mudguard. It's equipped with a ø70mm EU approved taillight with integrated license plate lightning, a plug & play wiring harness, turn indicators brackets on choice and optional turn indicators. This part comes in place of your original taillight / license plate holder unit....

View

Universal

Universal license plate holder / taillight

€84.00

Universal license plate holder / taillight unit, with integrated license plate lightning, mounted on a universal plate holder. Distance between centers of the mounting holes: 45mm (M5 holes). Supplied with the necessary stainless hardware. You can fit this taillight / license plate holder on any rear mudguard. Light dimension : Diameter 70mm / Depth 50mm.

Moto Guzzi

Rear turn indicators brackets for Moto Guzzi

€30.00

Rear turn signals bracket for Moto Guzzi. Enables you to mount your blinkers / indicators on the upper shock absorber axles for a more discreet look. Comes in pairs. This part is available for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9.

View

Parts

Leather covered handlebar grips

€145.00

Leather covered handlebars grips. Wrapped with a high quality leather, it gives a touch of chic to your motorcycle while keeping a good takeover. Available in aged brown, gold, black and ruby leather. Four thread stitchings colors available so it perfectly fits your bike. Available for ø25,4mm (1 inch) handlebars.

View

Triumph

Heritage rear mudguard for Triumph (pre- 2016)

€360.00

Heritage rear mudguard for Triumph (pre-2016 - air-cooled) manufactured out of stainless steel. It's shorter than your original Triumph rear mudguard, but it respects the original Triumph lines making it visually lighter, while keeping a good protection against the rear wheel projections. Equipped with a LED taillight (CE approved for road use) with...

View

Rear Fender Eliminator Kit Triumph 2016-...

Parts

Rear Fender Eliminator Kit Triumph 2016-...

€240.00

Looking to streamline the rear of your Triumph Bonneville T100/T120, ST900, or Scrambler 900? This fender eliminator kit with a license plate holder allows you to completely remove the original rear fender. Made from aluminum and stainless steel, the kit comes with a homologated LED taillight and license plate illumination. A plug-and-play adapter...

View

Home

T-shirt BAAK Pocket "BMW"

€29.00

T-shirt "BAAK Pocket" BMW. This t-shirt is manufactured out of biologic cotton. It has a pocket on the left side of the chest with a black embroidered pattern, and our BMW NineT Bobber silk-screen printed on the back. This t-shirt has a Slim cut, the fabric is white color. It's mixed, both Him and Her will proudly wear it. Size S is more suitable for a...

View

Triumph

Rear turn indicators brackets for Triumph

€30.00

Rear turn signals bracket for Triumph. Enables you to mount your turn signals on the upper shock absorber axles for a more discreet look. Compatible with the original passenger grab handle. Make sure to select the right model of motorcycle so you can receive brackets suitable for your motorcycle. Comes in pairs. Length: 50mm.

View

Parts

Universal Medium side leather saddlebag

€174.00

Universal Medium leather side saddlebag for motorcycle. Handcrafted at our workshop, it enables you to bring some stuff while you ride, and gives a great vintage look to your motorcycle. It's available in aged brown, gold, black or ruby leather color. The bottom of the saddle is pre-drilled (120mm enter-axis) so you can assemble it easily on your bike....

View

Triumph

Mini front mudguard for Triumph

€165.00

Mini front mudguard for Triumph, manufactured out of stainless steel. This front fender is very short, it enables you get a more compact look on the front end of your motorcycle. It's pre-drilled so you can easily fit it on your model of Triumph. It's designed and manufactured by our team at the workshop in France. It's available in satin black,...

View

Universal classic-vintage motorcycle rear mudguard

Universal classic-vintage motorcycle rear mudguard 2

-20%

Parts

Universal classic-vintage motorcycle rear mudguard

€96.00 €120.00

An essential accessory for retro motorcycle enthusiasts. Made from stainless steel, this fender is designed to give your motorcycle an authentic and elegant look. With its classic design and neat finish, it will add a unique touch of style to your café-racer, scrambler, or other motorcycle. This fender is specially designed to fit classic and vintage...

View

Reinforced aluminium engine protection for Royal Enfield 650 Interceptor and Continental GT

Reinforced aluminium engine protection for Royal Enfield 650 Interceptor and Continental GT 2

Interceptor / Continental GT 650

Trail engine protection for Royal Enfield 650 Interceptor / Continental GT

€125.00

Aluminium engine protection for Royal Enfield 650 Interceptor / Continental GT (2018-...). In addition to offering your Royal Enfield an adventurer look, this sump guard provides a real protection to your motorcycle in any situation. His 4mm thick aluminium structure is a bulwark against the terrain bumps that could his your engine block. Very easy to...

View

Black front mudguard holder for Royal Enfield 650 Interceptor / Continental GT

Interceptor / Continental GT 650

Black front mudguard holder for Royal Enfield 650 Interceptor / Continental GT

€48.00

Black front mudguard holder for Royal Enfield 650 Interceptor et Continental GT (2018-...). This black front fender bracket comes in place of the original grey color front fender holder of your Royal Enfield. This is the perfect accessory if, just like us, you pay attention to all the finish details of your machine. Suitable for both original mudguard...

Leather handlebar pad for motorcycle (black, brown, red, gold)

Parts

Leather handlebar pad

€75.00

Leather-covered handlebar pad. Appart from the protection brought by this pad in case of shock with your handlebar, his leather cover will bring a classic off road look to your motorcycle. Our craftsmen re-interpreted the codes of off road bar pads to give it an aesthetic use. The inner diameter for the crossbar is ø12mm, the external diameter of the pad...

View

License plate holder for original Moto Guzzi V9 fender

V9 (2016 -...)

License plate holder for original Moto Guzzi V9 fender

€168.00

License plate holder for original rear fender of Moto Guzzi V9. This bracket, painted in satin black epoxy, mounts directly in place of the original unit. It consists of a license plate holder, a round LED tail light (EU approved) with license plate illumination, a pair of indicator brackets of your choice, and a plug & play wiring harness.

View

Triumph

Intake covers for Triumph 900 (2016)

€65.00

Pair of aluminium intake covers for Triumph (2016-...). These covers come in place of the original ones to give a better aesthetic look to your motorcycle. It's suitable for Triumph Street Twin / Street Cup and Bonneville T100 (2016-...). It comes by pair. It's available in Satin black and Brushed finish. It comes with all the necessary mounting...

View

Triumph

Short leather seat kit for Triumph (pre- 2016)

€1,290.00

Short leather seat kit for Triumph (before 2016 - air-cooled). This leather seat kit enables you shorten the rear end of the motocycle to reach a more compact look while keeping two seatings to bring a passenger. No welding required. It comes with assembly instructions. Comes with: Machined aluminium short subframe system Genuine short leather seat...

View

License plate holder for US format with light mount

Parts

License plate holder for US format with light mount

€22.80

This license plate holder is suitable for US size license plates (horizontal). It's manufactured out of 3mm thick aluminium and it's satin black powder coat painted. This support allows you to mount a license plate light. This part is only suitable for BAAK license plate holders.

Universal

Universal handlebars controls kit

€198.00

This Universal handlebars controls kit is essential to clear your cockpit. Each part of the kit must be purchased separately : Brake master cylinder Throttle Clutch lever This kit designed by our craftsmen shows a perfect finish level thanks to his assembly quality and satin black powder coat painting. These parts are available for classic and vintage...

View

Triumph

Side license plate holder for Triumph

€95.00

Side license plate support / holder for Triumph. It attaches to the upper axis of the left shock absorber. It comes with a connection wiring harness that makes it 100% plug and play. Satin black powder coat painting finish. If you choose the optional turn indicators, we'll provide the potential resistors necessary for their proper functioning according...

View

Triumph

Wide fork triple trees kit for Triumph T100-T120 (2016)

€1,200.00

Wide fork triple yokes kit for Triumph Bonneville T100 / T120 (2016-... - liquid-cooled), it enables you mount a wide front tire (3.50). The kit includes the upper and lower triple trees 20mm wider, the lower bearing, the brake discs struts, the handlebar clamps and the wheel axle. Enable to lower the front end by 25mm. This kit is used on our Triumph...

View

Moto Guzzi

Front fender Medium for Moto Guzzi

€165.00

Front fender Medium for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9, made of stainless steel. It is short but long enough to protect you from splashes from the front wheel. It is pre-drilled to fit the original fender mounting system. Designed and manufactured by our craftsmen in our workshop in France. Dimensions: 410x125 mm.Made in France

View

Home

BAAK Leather Sample

€12.00

This is the essential tool to help you choose the right color and feel the quality of the leather at your fingertips. Order it online, and the cost will be refunded with the purchase of a leather item from the BAAK range.* *Excludes glasses cases, keychains, pot covers, boot protectors, and discounted or sale items.

US license plate holder with tail light support

Parts

US license plate holder with tail light support

€22.80

This license plate holder is suitable for US format license plates (horizontal 170x100mm). It's made of 3mm thick aluminum, painted in satin black epoxy paint. This bracket must be purchased in addition to the original fender license plate support to convert it to fit USA plates. It's compatible with this Vintage Tail Light. Made in France

Front mudguard risers kit for Royal Enfield 650 Interceptor / Continental GT

Interceptor / Continental GT 650

Front mudguard risers kit for Royal Enfield 650 Interceptor / Continental GT

€33.00

Risers kit for Royal Enfield 650 Interceptor / Continental GT front mudguard. This 4 screws and 4 aluminium struts enable you to lift up your front mudguard by 10mm if you plan to mount a wider and higher tire on your Royal Enfield 650 Interceptor / Continental GT. Suitable for your original mudguard. The struts must be mounted between your original...

Triumph

Bates headlight plate for Triumph (pre-2016)

€169.00

Bates type headlight plate for Triumph (pre- 2016 - air-cooled). Essential to hide the steering column and all the cables after the mounting of a Bates headlight. Comes with 4 black leather clamps in black, aged brown, gold or ruby color. Available in satin black and raw aluminium finish. Measurements : 220mm x 190mm.

View

Moto Guzzi

Mini front mudguard for Moto Guzzi

€165.00

Mini front mudguard for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9, manufactured out of stainless steel. This front fender is very short, it enables you visually lighten the front of your motorcycle. It's pre-drilled so it fits the original fixation system of your motorcycle. It's designed and manufactured by our team at the workshop in France. It's...

View

Triumph

Classic rear mudguard for Triumph (pre- 2016)

€300.00

Classic rear mudguard for Triumph (pre-2016 - air-cooled) manufactured out of stainless steel. Shorter than your original Triumph rear mudguard, it has an elegant raw look thanks to the molded edge at its end. You will still keep good protection against the rear wheel projections. Equipped with a LED taillight (CE approved for road use) with license...

View

Triumph

Rear mudguard wiring harness for Triumph

€19.00

Rear mudguard wiring harness for Triumph. This wiring harness is necessary to connect an aftermarket set of turn indicators and taillight on your Triumph. It's plug & play over the factory connector, just make sure to select the right model. Comes standard with all the mudguards we sell for Triumph. Manufactured at BAAK's workshop in France.

View

Triumph

Monza gas cap for Triumph

€150.00

Monza gas cap for Triumph Modern Classics. The timeless design of this Monza cap will perfectly suit your gas tank thanks to our adapter. Only suitable for Triumph Modern Classics: Air cooled (2000-2016) and new Liquid Cooled (since 2016). The full kit is composed by the polished aluminium gas cap, a seal, the necessary mounting hardware and the adapter....

Royal Enfield

Rear Footpeg Mounting Plate for Royal Enfield 650

€120.00

Designed to move the passenger foot pegs forward and down, making room for the installation of large saddlebags while increasing passenger comfort without interfering with the rider. This is a sturdy stainless steel plate with a satin black epoxy coating.

Large bag holder for Triumph short seat kit (2016 - ...)

Home

Large bag holder for Triumph short seat kit (2016 - ...)

€240.00

Designed for our large removable rolled bags or satchel bags, this bracket is compatible with our Triumph short seat kit (2016-...). This bracket only addresses the need to install one or two large bags if you have a BAAK short seat kit.We obviously designed it so that the bag does not interfere with the passenger. The bracket can be easily screwed or...

View

License plate holder for US format side license plates

Parts

License plate holder for US format side license plates

€22.80

This license plate holder is suitable for US size license plates (vertical) mounted in side position. It's manufactured out of 3mm thick aluminium and it's satin black powder coat painted. This part is only suitable for BAAK side license plate holders.

Side license plate holder for Royal Enfield 650 Interceptor / Continental GT

Interceptor / Continental GT 650

Side license plate holder for Royal Enfield 650 Interceptor / Continental GT

€168.00

This side license plate holder for Royal Enfield 650 Interceptor / Continental GT (2018-...) is designed to be mounted on your passenger footrest. It will let you clean the rear end of your motorcycle by re-locating the license plate. It comes with an EU approved taillight with integrated license plate lightning. It comes with a plug & play wiring...

Side Number Plate Holder for Royal Enfield 650 Interceptor and Continental GT Satin Black

Side Number Plate Holder for Royal Enfield 650 Interceptor and Continental GT Satin Black 2

Interceptor / Continental GT 650

Royal Enfield 650 Interceptor / Continental GT number plate holder

€120.00

Royal Enfield 650 Interceptor / Continental GT (2018–...) side number plate holder made of aluminum. The brushed number plate is mounted on an aluminum side cover that replaces the original one, supplied with all necessary mounting hardware. Ideal for giving your Royal Enfield a Tracker look. Available for right or left side, with side cover in Brushed or...

View

Biker equipment

T-shirt BAAK Helmet "Grey"

€39.00

T-shirt BAAK Helmet "Grey". The importance of this t-shirt can be found in the details : a helmet is cross-stitch embroidered, true to BAAK's work. It's available in two colors. The t-shirt is grey color, the helmet embroidered on the chest is in shades of orange. It's mixed, both Him and Her will proudly wear it.

View

Triumph

Side number panel for Triumph (pre- 2016)

€120.00

Currently unavailable for sale Side number panel for Triumph (pre-2016 - air-cooled) manufactured out of aluminium. The number plate is placed on a side aluminium cover that comes to replace the original cover, with all the necessary stainless steel screwing system. Available for Right or Left side, with the side cover in Brushed or Satin black finish....

View

Triumph

Lowering kit for Triumph T100-T120 (2016)

€1,260.00

Aluminium upper triple trees kit for lowering, available for Triumph Bonneville T100 / T120 / Street Twin (2016-... - liquid-cooled). It includes the flat upper triple tree, the handlebar clamps, the ignition switch and / or speedometer bracket, and the short Big Body shock absorbers. This lowering kit was designed and manufactured at our workshop. We...

View

Triumph

2Win shock absorbers for Triumph (pre-2016)

€517.20

2Win aluminum shock absorbers for Triumph (before 2016 - air-cooled). These shocks are adjustable in spring preload and hydraulic. Each click of the knob changes the setting of hydraulic compression and rebound simultaneously, it's very easy to use even while riding. If you choose a shorter set than the original one, we recommend you to also go for our...

View

Home

Heritage BAAK T-shirt

€34.00

Made from soft and comfortable cotton, this black tee from the Heritage collection features a subtle oversized fit, just enough to combine style and ease. Its BAAK embroidery at the center adds a unique and refined touch, making this piece an essential that is both authentic and timeless.

View

License plate bracket kit - Fantic Caballero 500

License plate bracket kit - Fantic Caballero 500 2

Home

License plate holder kit - Fantic Caballero 500

€108.00

License plate holder kit for Fantic Caballero. The holder is painted in satin black epoxy and allows you to re-install the original license plate light of your motorcycle. Compatible with: Caballero 125-250-500 from 2018 to 2024 + All versions except Flat Track

Triumph

Triumph Thruxton 1200 Tank Strap

€96.00

Leather tank strap designed for Triumph Thruxton 1200 tanks. It fits under the original stainless steel strap, adding a refined look to your tank while enhancing its appearance. Made in France

View

Headlight brackets for original headlights V7 III / V7 850 / V9

Headlight brackets for original headlights V7 III / V7 850 / V9 2

Parts

Headlight brackets for original headlights Moto Guzzi V7 III / V7 850 / V9

€129.00

Enhance the look of your Moto Guzzi V7 III, V7 850 or V9 with these machined aluminum headlight clamps, compatible with original LED and bulb headlights. With a length of 60 mm and 39-40 mm mounting clamps, they also allow the installation of adaptable turn signals. Finished in satin-black epoxy, they are supplied in pairs with stainless steel screws...

View

BAAK | Trail engine protection for Triumph T100/T120.

Parts

Trail engine protection for Triumph T100/T120

€145.00

Aluminium engine protection for Triumph T100/T120 (2016-…) with an adventurer look and for the best protection.

Fork spring blocks for Triumph Street Scrambler (2016)

Street / Speed Twin 900 (2016 -...)

Fork spring blocks for Triumph Street Scrambler (2016)

€19.00

This pair of stainless steel fork spring blocks let you rise the front of your Triumph Street Scrambler (2016-...) by 10mm, particularly if you choose longer shock absorbers for your machine. These blocks simply come on top of your original fork springs.

Triumph

Brembo brake pads for Triumph

€51.80

Brembo front brake pads for Triumph. Softer than the original ones, these front brake pads are manufactured out of high quality material that provides a perfect braking constancy, as much in cold or high temperature conditions. The friction coefficient is higher than on your original Triumph brake pads, which provide excellent braking performances and...

Crash bars for Royal Enfield 650 Interceptor / Continental GT

Parts

Crash bars for Royal Enfield 650 Interceptor / Continental GT

€156.00

Crash bars for Royal Enfield 650 Interceptor / Continental GT. These black crash bars will save your motorcycle if you happen to fall. And it will give it a great adventurer look. It's easy to assemble and doesn't require any other modification on the motorcycle. The tubes are ø25,5mm diameter.

Triumph

Big Body shock absorbers for Triumph Thruxton 1200 / Speed Twin (2016)

€711.60

Wide Big Body shock absorbers for Triumph Thruxton 1200 and Speed Twin 1200 (2016-...). With our manufacturing partner, we designed these aluminium shocks in order to give a stronger look and a better shocks absorption skills to the Triumph Modern Classic motorcycles. It's adjustable in hydraulic compression and relaxation thanks to an only knob, which...

View

Triumph

Scrambler front mudguard for Triumph (2016)

€285.00

High front fender for Triumph (2016-... - liquid-cooled). This high Scrambler look front mudguard is handcrafted out of stainless steel, and comes on the lower triple trees of your Triumph thanks to the provided black fixation bracket. It offers a good protection against the front wheel projections and a strong off road look to your motorcycle....

View

2Win shock absorbers for Royal Enfield 650 Interceptor / Continental GT

Interceptor / Continental GT 650

2Win shock absorbers for Royal Enfield 650 Interceptor / Continental GT

€517.20

2 Win aluminium shock absorbers for Royal Enfield 650 Interceptor / Continental GT (2018-...). These shocks are adjustable in spring preload and hydraulic. Each click of the knob changes the setting of hydraulic compression and relaxation at the same time, it's very easy to use even while riding. Available in 355mm (short stroke) and 360mm size (original...

View

High Scrambler front mudguard for Moto Guzzi V7I and V7II

High Scrambler front mudguard for Moto Guzzi V7I and V7II 2

V7 I & V7 II (2007-2017)

Scrambler front mudguard for Moto Guzzi V7I / V7II

€285.00

High front fender for Moto Guzzi V7I and V7II. This Scrambler look front mudguard is handcrafted out of stainless steel, and gets assembled on the lower triple trees of your V7 thanks to the provided black fixation bracket. It offers a good protection and a strong off road look to your motorcycle. Available in Glossy black, Satin black, Brushed and...

View

Parts

Universal Mini front mudguard

€114.00

Universal Mini front mudguard, manufactured out of stainless steel. This front fender is very short, it enables you visually lighten the front of your motorcycle. It's not pre-drilled so you can fit it on any model of motorcycle. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black,...

View

Parts

Universal Classic Medium front mudguard

€114.00

Universal Classic Medium front mudguard, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's not pre-drilled so you can fit it on any model of motorcycle. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black, brushed and ready to...

View

Triumph

Big Body shock absorbers for Triumph (2016)

€711.60

We designed these aluminum shocks in order to give a stronger look and a better shocks absorption to the Triumph Modern Classic motorcycles. It's adjustable in hydraulic compression and rebound thanks to a single knob, which makes it really easy to use, even while riding. It's the largest shock absorbers you can find for these Triumph models (diam....

View

Royal Enfield

Gallinella Rear Section for Royal Enfield 650 Interceptor / Continental GT (without seat)

€690.00

Make this Gallinella Tail Kit for Royal Enfield 650 Interceptor / Continental GT the centerpiece of your customization project, and transform your Royal Enfield into a timeless machine that stands out from the crowd. This kit includes: Bolt-on rear loop and cutting template Gallinella resin tail section Not compatible with the original seat

Flat Triple Clamp Triumph T100/T120 – 3 Aluminum Versions | Made in France

Flat Triple Clamp Triumph T100/T120 – 3 Aluminum Versions | Made in France 2

Parts

Flat triple trees Triumph T100/T120

€600.00

Transform your Triumph T100/T120 with this flat, mass-cut aluminum fork crown. Finished in satin black with a high-quality epoxy paint, it comes with a pair of bridges of your choice. This fork crown lowers your bike by 15mm at the front, so we recommend tuning your shocks or opting for our lowering kit. It is also compatible with Street Twin and Speed...

View

Parts

Large Leather Messenger Bag

€897.00

Discover our removable leather satchel, an exceptional piece meticulously handcrafted by our French artisans. Every detail is painstakingly executed, bearing witness to our commitment to quality. This exquisite leather goods creation is crafted from BAAK's top-quality vegetable-tanned leathers. Delivered with an adjustable and detachable strap, this...

View

Bodywork and protection

Leather Desk pad

€255.00

Large BAAK Desk pad for your desk or workbench, made from BAAK leathers. visible stitching and hot stamping of the logo at the bottom right. Handcrafted at the workshop. Dimensions: H 50, W 70

Home

Leather Tool-Roll

€149.00

BAAK leather Tool-Roll with visible stitching, hot stamping of the logo. Several compartments, open and closed. Top flap to hold the tools inside the kit. Dimensions closed (cm): H 10, W 26Open dimensions (cm): H 40, W 40

View

Long shock absorbers for Royal Enfield 650 Interceptor

Long shock absorbers for Royal Enfield 650 Interceptor 2

Interceptor / Continental GT 650

2Win TRAIL shock absorbers for Royal Enfield 650 Interceptor

€517.20

2Win Trail aluminium shock absorbers for Royal Enfield 650 Interceptor / Continental GT (2018-...). These shocks are adjustable in spring preload and hydraulic. Each click of the knob changes the setting of hydraulic compression and relaxation at the same time, it's very easy to use even while riding. It's 20mm longer than your original shock absorbers...

Royal Enfield

Gallinella fairing kit for Royal Enfield 650 Interceptor / Continental GT

€1,249.99

Gallinella rear fairing kit for Royal Enfield 650 Interceptor / Continental GT (2018-...). Turn this kit into the masterpiece of your custom project and make your Royal Enfield stand out from the mass. This kit includes: Screwed short subframe with cutting template Short leather seat Gallinella fiber fairing License plate holder, taillight (trim ring...

View

Scrambler front mudguard for Royal Enfield 650 Interceptor / Continental GT

Interceptor / Continental GT 650

Scrambler front mudguard for Royal Enfield 650 Interceptor / Continental GT

€285.00

High front mudguard for Royal Enfield 650 Interceptor / Continental GT (2018-...). This Scrambler stainless steel front fender gets assembled in high position on your motorcycle lower triple tree thanks to our specific bracket. It offers a good protection and a perfect off road look. It's available in 5 different finishes (Brushed, Glossy black, Satin...

View

Classic Medium front mudguard for Triumph Bobber

Bonneville Bobber (2017 -...)

Classic Medium front mudguard for Triumph Bobber

€210.00

Classic Medium front mudguard for Triumph Bonneville Bobber (2017-...), manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled and comes with its mudguard fixation brackets so it can be easily fitted on your Triumph Bobber. This front fender isn't suitable for Triumph Bobber Black, Bobber TFC...

View

Biker equipment

T-shirt BAAK Helmet "Olive"

€39.00

T-shirt BAAK Helmet "Olive". The importance of this t-shirt can be found in the details : a helmet is cross-stitch embroidered, true to BAAK's work. It's available in two colors. The t-shirt is olive green color, the helmet embroidered on the chest is in shades of blue. It's mixed, both Him and Her will proudly wear it.

View

Triumph

Rectifier bracket for Triumph (pre- 2016)

€30.00

Rectifier relocation bracket for Triumph (pre-2016 - air-cooled). This bracket enables you to relocate the voltage rectifier, in place of the horn. Then the horn can be attached below, on the same bracket. It's manufactured out of aluminum laser cut. You may be obliged to move the original wiring harness under the gas tank. All the necessary screwing...

Moto Guzzi

Side license plate holder for Moto Guzzi

€95.00

License plate support / holder for Moto Guzzi. This part gets attached on the left upper shock absorber axis. It comes with a plug & play wiring harness. This support is satin black powder coat painted. If you choose the optional turn indicators, we'll provide the wiring harness and potential resistors necessary for their proper functioning according...

View

Triumph

Rear turn indicators brackets for Triumph (pre- 2016)

€30.00

Rear turn indicators support for Triumph (pre-2016 - air-cooled). Simple, effective and very discreet. It's manufactured out of stainless steel, laser cut (3mm thick) and satin black powder coat painted. It fits with any rear fender. Delivered without turn signals. This part isn't suitable for the original (or accessory) passenger grab bar.

Moto Guzzi

Gas tank leather belt for Moto Guzzi V7I / II

€144.00

Leather gas tank strap / belt for Moto Guzzi V7 I and V7 II. It enables to wrap your gas tank and to give it a distinguished look. It's available in black, aged brown and gold leather colors so it perfectly suits your motorcycle. The straps get easily assembled on the gas tank cap thanks to two aluminium brackets. An adjustable nylon belt enables you to...

View

Parts

Universal Mini side leather saddlebag

€162.00

Universal Medium leather side saddlebag for motorcycle. Handcrafted at our workshop, it enables you to bring some stuff while you ride, and gives a great vintage look to your motorcycle. It's available in aged brown, gold, black or chocolat leather color. It's particularly suitable to be put on the original battery cover of a Royal Enfield Classic /...

View

Front mudguard for Triumph Bonneville (pre- 2016)

Bonneville (2000-2016)

Front mudguard for Triumph Bonneville (pre- 2016)

€165.00

Long and narrow front mudguard for Triumph Bonneville (pre-2016 - air-cooled). It's the narrowest front fender which enables you keep the original metal fixation legs. It's a stainless steel front fender, designed and manufactured in France at BAAK's workshop. It enables to keep a classic look and a good protection against the wheel projections. It's...

View

Triumph

Scrambler front mudguard for Triumph (pre-2016)

€285.00

High front fender for Triumph (pre-2016 - air-cooled). This Scrambler look front mudguard is handcrafted out of stainless steel, and comes on the lower triple trees of your Triumph thanks to the provided black fixation bracket. It offers a good protection against the front wheel projections and a strong off road look to your motorcycle. Available in...

View

Parts

Universal Medium Front Fender

€114.00

Universal Medium Front Fender, made of stainless steel. It is short but long enough to protect you from splashes from the front wheel. It is not pre-drilled, so you can adapt it to any motorcycle. Designed and manufactured by our craftsmen in our workshop in France. Dimensions: 410x125 mm.Made in France

View

Stainless steel collars for exhaust wrap

Parts

Stainless steel collars for exhaust wrap

€24.00

This batch of 8 self-fruits in stainless steel will allow you to correctly attach the thermal strip to your exhaust. Don't tell us that you just go to do this with twisted thread. delivered by 8 units.

Parts

Short fork spring blocks

€19.00

Short fork spring blocks. To proportionally lower the front en of your Triumph or Moto Guzzi V7 when you fit our short shock absorbers, you will need these fork springs blocks. It's 2cm (25/32'') shorter and comes right in place of the original ones.

View

Triumph

2Win shock absorbers for Triumph (2016)

€517.20

2 Win aluminum shock absorbers for Triumph (liquid-cooled - since 2016). These shocks are adjustable in spring preload and hydraulic.Each click of the knob changes the setting of hydraulic compression and rebound simultaneously, it's very easy to use even while riding. Available in 340mm and 350mm length. Shock absorbers manufactured in aluminum in...

View

2Win shock absorbers for Moto Guzzi V7I / V7II

2Win shock absorbers for Moto Guzzi V7I / V7II 2

V7 I & V7 II (2007-2017)

2Win shock absorbers for Moto Guzzi V7I et V7II

€517.20

Aluminum 2Win shock absorbers for Moto Guzzi V7 I and V7 II. These shocks are adjustable in spring preload and hydraulic. Each click of the knob changes the setting of hydraulic compression and rebound simultaneously, it's very easy to use. BAAK developed a shorter shock compared the original one, to give a chunky look to your bike, without loosing...

View