Plate holder

Showing 1-24 of 36 item(s)

Short license plate holder for Royal Enfield Bear 650

Short license plate holder for Royal Enfield Bear 650 2

New

Bear 650

Short license plate holder for Royal Enfield Bear 650

More discreet than the original, this stainless steel accessory replaces the unsightly plastic license plate holder on the Royal Enfield Bear 650 (2025-...) while retaining the stock mudguard. A license plate light is included. This is a simple, cost-effective solution, but if you want to significantly enhance the finish of your Bear 650, we recommend...

View

License plate holder with tail light for Royal Enfield Bear 650

License plate holder with tail light for Royal Enfield Bear 650 2

New

Bear 650

License plate holder with tail light for Royal Enfield Bear 650

Short license plate holder with tail light for stock Royal Enfield Bear 650 mudguard (2025-...). Designed to visually lighten the rear of your Royal Enfield, this short license plate holder allows you to replace the stock tail light and turn signals. It is equipped with a more discreet, CE-approved LED tail light with integrated license plate light....

View

Side license plate bracket - Fantic Caballero

Side license plate bracket - Fantic Caballero 2

Fantic

Side license plate bracket - Fantic Caballero

Side license plate bracket for Fantic Caballero 125-250-500. This aluminum bracket mounts to the left rear passenger grab rail mounting bolts. Supplied with a plug & play license plate light making the accessory easy to install. Satin black epoxy paint finish. This side plate bracket is compatible with the Fantic Caballero's original tail section, as...

Rear fender wiring harness for Moto Guzzi

Rear fender wiring harness for Moto Guzzi 2

Moto Guzzi

Rear fender wiring harness for Moto Guzzi

Rear fender wiring harness for Moto Guzzi. This harness allows you to connect aftermarket turn signals + taillight on your Moto Guzzi. It is plug & play with your machine’s original terminals. Available in long or short length. Subject to sufficient cable length, we recommend the short length for mounting on the shock absorber axle and the long...

View

Universal single US plate bracket for bare rear fender

Universal single US plate bracket for bare rear fender 2

Universal

Universal single US-style license plate bracket for bare rear fender

This license plate bracket is designed for US-format (horizontal) plates. It is made from 3 mm thick aluminum, painted with satin black epoxy paint. It can be mounted directly to a fender using the supplied plate. You can install it elsewhere by adapting it to your needs. Overall dimensions: 96 mm (height), 169 mm (width)

Universal US plate bracket with integrated license light mount for bare rear fender

Universal US plate bracket with integrated license light mount for bare rear fender 2

Universal

Universal US license plate bracket with lighting mount for bare rear fender

This plate bracket is suited to US-format license plates (horizontal). It is made from 3 mm thick aluminium, painted with satin black epoxy paint. It can be mounted directly on a fender thanks to its supplied plate. You can install it elsewhere by adapting it to your needs. This bracket allows mounting a license plate light with M6 or M8 fittings. Overall...

EU license plate bracket with universal tab for naked rear fender

EU license plate bracket with universal tab for naked rear fender 2

Universal

EU plate bracket with universal tab for bare rear fender

This license plate bracket is designed for European-format license plates. It is made from 3 mm thick aluminium, painted with satin black epoxy paint. It can be mounted directly on a fender using the supplied plate. You can install it elsewhere by adapting it to your needs. This bracket allows fitting a license plate light in M6 or M8. Bracket dimensions...

Universal EU plate bracket for bare rear fender

Universal EU plate bracket for bare rear fender 2

Universal

Universal EU plate bracket for bare rear fender

Center-to-center of the mounting holes 45 mm in M5. The necessary stainless hardware is supplied. You can fit this plate bracket to the rear fender of your choice. It can be mounted directly to a fender thanks to the supplied plate. You can install it elsewhere by adapting it to your needs. It is made from 3 mm thick aluminium, painted with satin black...

License plate bracket kit - Fantic Caballero 500

License plate bracket kit - Fantic Caballero 500 2

Caballero 125-250-500

Short license plate bracket kit for Fantic Caballero

License plate bracket kit for Fantic Caballero. The bracket is painted satin black epoxy and allows reinstallation of your motorcycle's original license plate light. Compatible with Caballero 125, 250 and 500 from 2018 to 2023 + All versions except Flat Track This license plate bracket kit is not compatible with models from MY 2024 onwards.

Side license plate bracket for BSA Goldstar 650

Side license plate bracket for BSA Goldstar 650 2

Goldstar 650

Side license plate bracket for BSA Goldstar 650

Optimize the appearance of your BSA 650 Goldstar with this side license plate bracket. Equipped with a license plate light, the bracket comes with mounts for universal turn signals (M10) to be mounted on the shock absorber shaft. Made in France WARNING: Not compatible with original turn signals! Not compatible with the BSA Scrambler 650.

Rear Fender BSA 650 Gold Star – Vintage Style & LED Light | BAAK

Rear Fender BSA 650 Gold Star – Vintage Style & LED Light | BAAK 2

Parts

Rear fender Classic for BSA Goldstar 650

Customize your BSA Goldstar 650 with this rear fender fitted with a Bates LED tail light, a license plate bracket and CE-approved license plate illumination. Say goodbye to the original plastic! This stainless steel fender is available in Brushed, Polished, epoxy Satin Black or ready to paint. Equipped with an LED tail light (CE-approved) with...

View

Original turn signal brackets on license plate bracket for BSA Goldstar 650

Original turn signal brackets on license plate bracket for BSA Goldstar 650 2

Goldstar 650

Original turn signal brackets on license plate bracket for BSA Goldstar 650

Turn signal brackets on license plate bracket. These stainless steel turn signal brackets mount to your BAAK license plate bracket for your BSA Goldstar 650. Supplied with stainless steel fasteners.

Short license plate bracket Triumph Scrambler 1200 XC/XE

Short license plate bracket Triumph Scrambler 1200 XC/XE 2

Parts

Short license plate bracket Triumph Scrambler 1200 XC/XE

More discreet than the original, this aluminium accessory replaces the unsightly plastic license-plate bracket of the 1200 Scrambler while retaining the original fender. The license-plate light is precabled with a plug&play connector. In the photos, the headlight and the turn signals are Triumph options.

Universal reflector for license plate

Universal reflector for license plate 2

Home

Universal reflector for license plate

Black finish, mounts on license plate bracket or directly on the license plate.

Rear fender delete kit Triumph 1200 Scrambler X-XE-XC

Rear fender delete kit Triumph 1200 Scrambler X-XE-XC 2

Parts

Rear fender delete kit Triumph 1200 Scrambler X-XE-XC

Do you want to clean up the rear of your Triumph 1200 Scrambler XC/XE/X? This tail tidy with license plate bracket lets you completely remove the original fender. Made from aluminium and stainless steel, the assembly is delivered with an approved LED taillight and a license plate light. A plug&play wiring harness adapter allows for very easy...

View

US license plate bracket for original Royal Enfield 650 Inter/GT fender

US license plate bracket for original Royal Enfield 650 Inter/GT fender 2

Parts

US license plate bracket for original Royal Enfield 650 Interceptor / Continental GT...

This plate bracket is suited for US-format license plates (horizontal 17x10mm). It is made from 3mm thick aluminium, painted with satin black epoxy paint. This bracket is to be purchased in addition to the original fender plate bracket in order to convert it to fit US plates. Made in France

Side license plate bracket for Triumph Bobber (2017-...)

Side license plate bracket for Triumph Bobber (2017-...) 2

Parts

Side license plate bracket for Triumph Bobber (2017-...)

Enhance the look of your Triumph Bonneville Bobber with this side-mounted license plate bracket. Equipped with a plate light and a plug-and-play wiring harness, it ensures easy installation. Not compatible with the original fender; this bracket is accepted by some motorcycle inspection centers in France. Made in France

Rear mudguard for Bobber 1200

Rear mudguard for Bobber 1200 2

Triumph

Rear fender for Triumph Bobber 1200

Rear fender for Triumph Bonneville Bobber 1200 in stainless steel. Its molded end gives it a raw, classic and elegant look. Although shorter than the original, it provides good protection against rear wheel spray.Made in France

View

US license plate bracket with license plate light bracket

US license plate bracket with license plate light bracket 2

Parts

US license plate bracket with license plate light bracket

This license plate bracket is suited to US-format (horizontal) license plates. It is made from 3mm thick aluminum, finished in satin black epoxy paint. This bracket allows mounting a license plate light. It is mandatory to purchase one of our license plate brackets offered by BAAK.

US license plate bracket

US license plate bracket 2

Universal

US license plate bracket

This license plate bracket is designed for US-format (horizontal) license plates. It is made from 3mm thick aluminium, painted with satin black epoxy paint. It is essential to purchase one of our license plate brackets offered by BAAK.

US license plate bracket with integrated stop-light bracket

US license plate bracket with integrated stop-light bracket 2

Parts

US license plate bracket with integrated stop-light bracket

This license plate bracket is suited to US-format license plates (horizontal 170x100mm). It is made from 3mm thick aluminium, painted with satin black epoxy paint. This bracket must be purchased in addition to the original fender license plate support to convert it to fit US plates. It is compatible with this Vintage Tail Light. Made in France

License plate bracket for US side-mounted plate

License plate bracket for US side-mounted plate 2

Parts

License plate bracket for US side license plate

This license plate bracket is suited to US-format (vertical) license plates mounted in a side position. It is made from 3mm-thick aluminum, painted with satin black epoxy paint. It is essential to purchase one of our BAAK side license plate brackets.

BAAK License plate lightning

BAAK License plate lightning 2

Parts

Universal license plate lighting

LED license plate light. This license plate light is approved to European ECE standards (12V / 2W). We use it on some of the license plate brackets manufactured at the BAAK workshop. License plate light dimensions: Length 17mm Diameter 12mm Mounting stem øM8.

Side plate bracket for Royal Enfield 650 Interceptor / Continental GT

Side plate bracket for Royal Enfield 650 Interceptor / Continental GT 2

Interceptor / Continental GT 650

Side license plate bracket for Royal Enfield 650 Interceptor / Continental GT

This side license plate bracket for Royal Enfield 650 Interceptor / Continental GT (2018-...) mounts to the passenger footpeg of your motorcycle. It helps tidy the rear of your bike as part of your custom project. It is fitted with a CE-approved tail light with integrated license plate illumination. It is delivered with a plug & play wiring harness...

1
2