Interceptor / Continental GT 650

Showing 1-101 of 101 item(s)

Flat triple trees kit for Royal Enfield 650 Interceptor / Continental GT

Flat triple trees kit for Royal Enfield 650 Interceptor / Continental GT

Flat triple trees kit for Royal Enfield 650 Interceptor / Continental GT (2018-...). This kit lets you relocate your original ignition switch control to clear the front of your motorcycle, replace your speedometer and use a high handlebar on your Continental GT. This kit includes : Aluminium fork triple trees Aluminium handlebar clamps (diameter on...

View

Relocated ignition switch bracket for Royal Enfield 650 Interceptor / Continental GT

Relocated ignition switch bracket for Royal Enfield 650 Interceptor / Continental GT 2

-30%

Interceptor / Continental GT 650

Relocated ignition switch bracket for Royal Enfield 650 Interceptor / Continental GT

$31 $44

Ignition switch relocation kit for Royal Enfield 650 Interceptor / Continental GT (2018-...). this kit is necessary to relocate the ignition switch from its original position to under your injection system, on the right side of your Royal Enfield. It includes an inox bracket and the wiring harness extension. The relocation of your ignition switch...

-15%

Parts

Leather Conditioner

$17 $20

This leather conditioner is a nourishing milk. It penetrates and nourishes the leather. You can use it for your saddles but also for your other leather products : shoes, jackets, gloves, saddlebags, etc. It comes with all the seat we offer. Capacity : 100 ml.

Leather gas tank strap for Royal Enfield

-35%

Royal Enfield

Leather gas tank strap for Royal Enfield

$99 $153

Leather gas tank strap / belt for Royal Enfield Bullet and Classic 500 (Euro IV and pre-Euro IV), Continental GT 535 and Interceptor / Continental GT 650. It gives a distinguished classic look to your motorcycle and protects your gas tank from scratches. The hole around the gas tank cap will be different depending on the model of motorcycle you choose....

View

Leather seat for Royal Enfield 650 Interceptor / Continental GT

Interceptor / Continental GT 650

Leather seat for Royal Enfield 650 Interceptor / Continental GT

$611

Heritage leather seat for Royal Enfield 650 Interceptor / Continental GT. This seat is handcrafted by our craftsmen at the BAAK's workshop in France, based on a Royal Enfield seat more comfortable than the original one and so it remains compatible with your motorcycle. It has the same shape as your original seat, but covered with leather which will give...

View

Bates headlight bracket for Royal Enfield 650 Interceptor / Continental GT

-35%

Interceptor / Continental GT 650

Bates headlight bracket for Royal Enfield 650 Interceptor / Continental GT

$18 $28

Bates headlight fixation bracket for Royal Enfield 650 Interceptor / Continental GT, required to mount a lower fixation headlight (Bates style) on your motorcycle. Manufactured out of aluminium, 3mm thick, black powder coat painting. Available in black finish only. This bracket comes with all the necessary stainless steel screwing.

Plate support for Royal Enfield 650 Interceptor / Continental GT

Plate support for Royal Enfield 650 Interceptor / Continental GT 2

-20%

Interceptor / Continental GT 650

License plate holder for Royal Enfield 650 Interceptor / Continental GT

$152 $190

License plate holder for original Royal Enfield 650 Interceptor / Continental GT mudguard. Equipped with a taillight (CE approved), license plate lightning, compatible wiring harness and included turn indicators brackets to be mounted on your upper shock absorber axles or the license plate holder on choice. The EU approved LED taillight comes with its...

View

Classic Medium front mudguard for Royal Enfield 650 Interceptor / Continental GT

Classic Medium front mudguard for Royal Enfield 650 Interceptor / Continental GT 2

-20%

Interceptor / Continental GT 650

Classic Medium front mudguard for Royal Enfield 650 Interceptor / Continental GT

$109 $136

Classic Medium front fender for Royal Enfield 650 Interceptor / Continental GT (2018-...), manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled so you can easily fit it on your motorcycle. This mudguard is available without or with risers kit (+10mm) if you want to mount a bigger tire on the...

View

Classic Mini front mudguard for Royal Enfield 650 Interceptor / Continental GT

Classic Mini front mudguard for Royal Enfield 650 Interceptor / Continental GT 2

-20%

Interceptor / Continental GT 650

Classic Mini front mudguard for Royal Enfield 650 Interceptor / Continental GT

$98 $122

Classic Mini front mudguard for Royal Enfield 650 Interceptor / Continental GT (2018-...), manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. We drill holes on this mudguard so it fits your motorcycle. This mudguard is available without or with risers kit (+10mm) if you want to mount a bigger tire on the...

View

Front mudguard risers kit for Royal Enfield 650 Interceptor / Continental GT

Front mudguard risers kit for Royal Enfield 650 Interceptor / Continental GT 2

-40%

Interceptor / Continental GT 650

Front mudguard risers kit for Royal Enfield 650 Interceptor / Continental GT

$22 $37

Risers kit for Royal Enfield 650 Interceptor / Continental GT front mudguard. This 4 screws and 4 aluminium struts enable you to lift up your front mudguard by 10mm if you plan to mount a wider and higher tire on your Royal Enfield 650 Interceptor / Continental GT. Suitable for your original mudguard. The struts must be mounted between your original...

2Win shock absorbers for Royal Enfield 650 Interceptor / Continental GT

Interceptor / Continental GT 650

2Win shock absorbers for Royal Enfield 650 Interceptor / Continental GT

$527

2 Win aluminium shock absorbers for Royal Enfield 650 Interceptor / Continental GT (2018-...). These shocks are adjustable in spring preload and hydraulic. Each click of the knob changes the setting of hydraulic compression and relaxation at the same time, it's very easy to use even while riding. Available in 355mm (short stroke) and 360mm size (original...

View

Front turn indicators brackets Royal Enfield 650 Interceptor / Continental GT

Front turn indicators brackets Royal Enfield 650 Interceptor / Continental GT 2

-35%

Interceptor / Continental GT 650

Front turn indicators brackets for Royal Enfield 650 Interceptor / Continental GT

$22 $34

Front turn indicators brackets for Royal Enfield 650 Interceptor / Continental GT. Simple and very discreet, these brackets are satin black powder coat painted and enable you mount any universal turn indicator with a øM8 or øM10 fixation on your Royal Enfield. It gets assembled under your lower from triple trees. It comes in pairs, sold without turn...

View

Classic rear mudguard for Royal Enfield 650 Interceptor / Continental GT

Classic rear mudguard for Royal Enfield 650 Interceptor / Continental GT 2

-20%

Interceptor / Continental GT 650

Classic rear mudguard for Royal Enfield 650 Interceptor / Continental GT

$272 $339

Classic rear mudguard for Royal Enfield 650 Interceptor / Continental GT, manufactured out of stainless steel at our workshop in France. Shorter than your original rear mudguard, it has an elegant raw look thanks to the molded edge at its end. You will still keep good protection against the rear wheel projections. Equipped with a LED taillight (CE...

View

Handlebar clamps for Royal Enfield 650 Interceptor / Continental GT

Handlebar clamps for Royal Enfield 650 Interceptor / Continental GT 2

-40%

Interceptor / Continental GT 650

Handlebar clamps for Royal Enfield 650 Interceptor / Continental GT

$65 $109

Machined aluminium handlebar clamps for Royal Enfield 650 Interceptor / Continental GT. These risers are available in ø22mm diameter, ø28,6mm diameter or 1 inch (ø25,4mm) diameter, it's lighter and elegant. The clamps are satin black powder coat painted, and come with all the stainless steel screwing kit compatible with your motorcycle. Designed and...

View

Engine protection for Royal Enfield 650 Interceptor / Continental GT

Engine protection for Royal Enfield 650 Interceptor / Continental GT 2

-35%

Interceptor / Continental GT 650

Engine protection for Royal Enfield 650 Interceptor / Continental GT

$85 $130

Engine protection / sump guard for Royal Enfield 650 Interceptor / Continental GT (2018-...). It will give a stronger look to Royal Enfield while protection the bottom of your engine against impacts and front wheels splashes. It's manufactured out of 1,5mm thick stainless steel. Available in Satin black or Brushed finish. It comes with all the necessary...

View

Royal Enfield - interceptor - side covers - black

Royal Enfield - interceptor - side covers - black 2

-35%

Interceptor / Continental GT 650

Side covers for Royal Enfield 650 Interceptor / Continental GT

$55 $85

Aluminium side covers for Royal Enfield 650 Interceptor / Continental GT. These aluminium side covers are designed and manufactured by our craftsmen at the workshop. It comes in place of the original plastic side panels of your Interceptor or Continental GT 650, and will highly improve its finish level. Available for Left or right side, comes with all...

View

Side leather saddlebag for Royal Enfield 650 Interceptor / Continental GT

Side leather saddlebag for Royal Enfield 650 Interceptor / Continental GT 2

-15%

Interceptor / Continental GT 650

Side leather saddlebag for Royal Enfield 650 Interceptor / Continental GT

$263 $309

Side leather saddlebag for Royal Enfield 650 Interceptor / Continental GT (2018-...). This saddlebag is handcrafted at our workshop in the same leather as our seats. It enables you to transport some stuff and gives a retro distinguished look to your Royal Enfield. It's available in Aged brown, gold, black leather. Saddlebag measurements: 20cm x 20cm x...

View

Royal Enfield 650 Interceptor ORIGINAL Kit

Royal Enfield 650 Interceptor ORIGINAL Kit 2

Interceptor / Continental GT 650

Kit Royal Enfield 650 Interceptor Original

$3,055

Kit ORIGINAL for Royal Enfield 650 Interceptor. Our craftsmen designed this parts pack to give a stronger look, purified line and better handling to this Royal Enfield. All these parts are easy to assemble on the motorcycle, all the necessary wiring harness, fixation brackets and resistors are provided. Choose your leather color (Aged brown / Black /...

Mini speedometer for Royal Enfield 650 Interceptor and Continental GT

Mini speedometer for Royal Enfield 650 Interceptor and Continental GT 2

-15%

Interceptor / Continental GT 650

Motogadget Tiny Speedometer for Royal Enfield 650 Interceptor / Continental GT

$431 $507

Tiny Speedometer for Royal Enfield 650 Interceptor / Continental GT (2018–...). This plug & play speedometer solution is ideal for streamlining the cockpit of your Royal Enfield while keeping all the functionalities of your original speedometer. The speedometer comes pre-wired, with its harness and satin black aluminum mounting bracket. Your...

View

Long cables kit for Royal Enfield 650 Interceptor / Continental GT

Interceptor / Continental GT 650

Long cables kit for Royal Enfield 650 Interceptor / Continental GT

$38

Long cables kit for Royal Enfield 650 Interceptor / Continental GT. This kit includes a long front brake hose, a pair of throttle cables and a clutch cable, all compatible with your motorcycle. It enables you mount a wider handlebar on your Royal Enfield. Each part of the kit can be purchased separately. The choice of variant (2024 - now) corresponds...

View

Bates headlight plate with leather collars for Royal Enfield Interceptor / Continental GT 650

-30%

Interceptor / Continental GT 650

Bates headlight plate for Royal Enfield 650 Interceptor / Continental GT

$131 $187

Bates headlight plate for Royal Enfield 650 Interceptor / Continental GT (2018-...). Attention, this part is only compatible with our Flat triple trees kit, it requires to move the ignition switch under the gas tank. Manufactured out of aluminium, this plate comes to hide the steering column and cables left visible after the assembly of a Bates...

View

Side Number Plate Holder for Royal Enfield 650 Interceptor and Continental GT Satin Black

Side Number Plate Holder for Royal Enfield 650 Interceptor and Continental GT Satin Black 2

Interceptor / Continental GT 650

Side number panel Royal Enfield 650 Interceptor / Continental GT

$136

Currently unavailable for sale Side number panel for Royal Enfield 650 Interceptor / Continental GT (2018-...) manufactured out of aluminium. The brushed number plate is placed on a side aluminium cover that comes to replace the original plastic one, with all the necessary screwing system. It will give a great Tracker look to your Royal Enfield Available...

View

Side license plate holder for Royal Enfield 650 Interceptor / Continental GT

Side license plate holder for Royal Enfield 650 Interceptor / Continental GT 2

-30%

Interceptor / Continental GT 650

Side license plate holder for Royal Enfield 650 Interceptor / Continental GT

$133 $190

This side license plate holder for Royal Enfield 650 Interceptor / Continental GT (2018-...) is designed to be mounted on your passenger footrest. It will let you clean the rear end of your motorcycle by re-locating the license plate. It comes with an EU approved taillight with integrated license plate lightning. It comes with a plug & play wiring...

Crash bars for Royal Enfield 650 Interceptor / Continental GT

Crash bars for Royal Enfield 650 Interceptor / Continental GT 2

-15%

Parts

Crash bars for Royal Enfield 650 Interceptor / Continental GT

$150 $177

Crash bars for Royal Enfield 650 Interceptor / Continental GT. These black crash bars will save your motorcycle if you happen to fall. And it will give it a great adventurer look. It's easy to assemble and doesn't require any other modification on the motorcycle. The tubes are ø25,5mm diameter.

Wide Flat Track handlebar kit for Royal Enfield 650 Interceptor

Wide Flat Track handlebar kit for Royal Enfield 650 Interceptor 2

-15%

Interceptor / Continental GT 650

Flat Track handlebars kit for Royal Enfield 650 Interceptor

$288 $338

Flat Track Handlebar Kit for Royal Enfield 650 Interceptor / Continental GT 650 (2018-present). This kit includes: - a wide Flat Track steel handlebar (brushed or polished finish) - an extended brake line - a pair of long throttle cables - a long clutch cable - a pair of ø22mm handlebar risers With a wider handlebar that has more pullback towards the...

View

Exhaust silencers for Royal Enfield 650 Interceptor / Continental GT

Interceptor / Continental GT 650

Exhaust silencers for Royal Enfield 650 Interceptor / Continental GT

$747

Short exhaust silencers for Royal Enfield 650 Interceptor / Continental GT (2018-...). This pair of aluminium mufflers offers a strong and deep sound to your motorcycle, without being noisy. It's composed of multiple baffles that won't damaged the engine performances. At the entrance of the muffler are two high-temperature O-ring seals so there is no...

View

Short leather seat kit for Royal Enfield 650 Interceptor / Continental GT

Short leather seat kit for Royal Enfield 650 Interceptor / Continental GT 2

Interceptor / Continental GT 650

Classic short leather seat kit for Royal Enfield 650 Interceptor / Continental GT

$950

Short leather seat kit for Royal Enfield 650 Interceptor / Continental GT (2018-...). This kit shortens the original seat length by 12cm to get a more compact look and the elegance of a leather seat, while keeping two seaters space. It includes: Screwed subframe (no welding required) with cutting template Genuine leather short seat Stainless steel rear...

View

Scrambler front mudguard for Royal Enfield 650 Interceptor / Continental GT

Scrambler front mudguard for Royal Enfield 650 Interceptor / Continental GT 2

-20%

Interceptor / Continental GT 650

Scrambler front mudguard for Royal Enfield 650 Interceptor / Continental GT

$258 $322

High front mudguard for Royal Enfield 650 Interceptor / Continental GT (2018-...). This Scrambler stainless steel front fender gets assembled in high position on your motorcycle lower triple tree thanks to our specific bracket. It offers a good protection and a perfect off road look. It's available in 5 different finishes (Brushed, Glossy black, Satin...

View

Short exhaust for Royal Enfield 650 Interceptor / Continental GT

Interceptor / Continental GT 650

Short exhaust for Royal Enfield 650 Interceptor / Continental GT

$1,086

Short exhaust line for Royal Enfield 650 Interceptor / Continental GT (2018-...), designed and manufactured by our craftsmen in France. The manifolds are stainless steel, the mufflers are aluminium. It provides a stronger and deeper sound than the original exhaust, but remains discreet. Despite the huge care we brought to making it discreet, it's not...

View

Gallinella rear fairing rear for Royal Enfield 650 Interceptor / Continental GT

-30%

Royal Enfield

Gallinella fairing kit for Royal Enfield 650 Interceptor / Continental GT

$990 $1,414

Gallinella rear fairing kit for Royal Enfield 650 Interceptor / Continental GT (2018-...). Turn this kit into the masterpiece of your custom project and make your Royal Enfield stand out from the mass. This kit includes: Screwed short subframe with cutting template Short leather seat Gallinella fiber fairing License plate holder, taillight (trim ring...

View

Rear turn indicators brackets for Royal Enfield by BAAK

-40%

Royal Enfield

Rear turn indicators brackets for Royal Enfield

$20 $34

Rear turn indicators holders for Royal Enfield. This pair of aluminium brackets will let you mount your turn indicators on the upper shock absorbers axles so it remains discreet. It's satin black high quality powder-coated so it resists over the years. Make sure to select the right model of motorcycle so you receive the holders that are suitable for your...

View

Aluminium intake cover for Royal Enfield 650 Interceptor / Continental GT

Aluminium intake cover for Royal Enfield 650 Interceptor / Continental GT 2

-40%

Interceptor / Continental GT 650

Aluminium intake covers for Royal Enfield 650 Interceptor / Continental GT

$44 $74

Pair of aluminium intake covers for Royal Enfield 650. These covers come in place of the original ones to give a better aesthetic look to your motorcycle. It comes by pair. It's available in Satin black and Brushed finish. It comes with all the necessary mounting hardware.

View

Black front mudguard holder for Royal Enfield 650 Interceptor / Continental GT

Black front mudguard holder for Royal Enfield 650 Interceptor / Continental GT 2

-15%

Interceptor / Continental GT 650

Black front mudguard holder for Royal Enfield 650 Interceptor / Continental GT

$46 $54

Black front mudguard holder for Royal Enfield 650 Interceptor et Continental GT (2018-...). This black front fender bracket comes in place of the original grey color front fender holder of your Royal Enfield. This is the perfect accessory if, just like us, you pay attention to all the finish details of your machine. Suitable for both original mudguard...

Reinforced aluminium engine protection for Royal Enfield 650 Interceptor and Continental GT

Reinforced aluminium engine protection for Royal Enfield 650 Interceptor and Continental GT 2

-35%

Interceptor / Continental GT 650

Trail engine protection for Royal Enfield 650 Interceptor / Continental GT

$92 $141

Aluminium engine protection for Royal Enfield 650 Interceptor / Continental GT (2018-...). In addition to offering your Royal Enfield an adventurer look, this sump guard provides a real protection to your motorcycle in any situation. His 4mm thick aluminium structure is a bulwark against the terrain bumps that could his your engine block. Very easy to...

View

Long shock absorbers for Royal Enfield 650 Interceptor

Long shock absorbers for Royal Enfield 650 Interceptor 2

Interceptor / Continental GT 650

2Win TRAIL shock absorbers for Royal Enfield 650 Interceptor

$527

2Win Trail aluminium shock absorbers for Royal Enfield 650 Interceptor / Continental GT (2018-...). These shocks are adjustable in spring preload and hydraulic. Each click of the knob changes the setting of hydraulic compression and relaxation at the same time, it's very easy to use even while riding. It's 20mm longer than your original shock absorbers...

Trail rear mudguard for Royal Enfield 650 Interceptor / Continental GT

Interceptor / Continental GT 650

Trail rear mudguard for Royal Enfield 650 Interceptor / Continental GT

$407

Trail rear mudguard for Royal Enfield 650 Interceptor / Continental GT (2018-...), manufactured out of stainless steel by our craftsmen in France. It's THE mudguard for adventurers, the ones used on our Royal Enfield 650 Interceptor BAAK Aventures. It's shorter than the original mudguard, while providing an efficient protection against the rear wheels...

View

Leather dye, perfect for motorcycle seats

Leather dye, perfect for motorcycle seats 2

Parts

Leather dye cream

$27

This leather dye cream is a maintenance solution. It penetrates the leather and gives it a deep black tint. You can use it for your saddles but also for any other leather product: shoes, jackets, gloves, saddlebags, etc. Capacity: 200 ml. It's available for Black, Gold, Brown and Ruby (red) leather.Should be applied with a cloth, mixed with our...

View

Parts

Mirror adapter

$17

Handlebar adapters, required to mount some mirrors on your handlebar. We offer two different solutions : Adapter for ø22mm handlebars, to mount our mirrors in underbar position (M10 threading) Through rod type adapter, to mount a mirror on a through rod type fixation in classic or underbar position

View

Parts

H4 Yellow bulb

$14

Yellow H4 bulb for motorcycle lighthouse. This bulb adapts to any lighthouse equipped with an original H4 bulb. It allows you to provide the lighting of your machine with a resolutely vintage appearance, without affixing a filter on the window of your headlight. This product preserves the lighting qualities of your machine, to be favored with respect to...

Parts

Exhaust wrap

$106

Here are 15 meters (or 49') of exhaust wrap, 5 cm wide (1'' & 31/32), to wrap up your exhaust system and get the BAD BOY look you're aiming at! For the black color thermal wrap, we highly recommend you to paint it with an high temperature paint so the color can resist over the months. Available in Black or Beige color. This is high quality part,...

View

Stainless steel collars for exhaust wrap

Parts

Stainless steel collars for exhaust wrap

$27

This batch of 8 self-fruits in stainless steel will allow you to correctly attach the thermal strip to your exhaust. Don't tell us that you just go to do this with twisted thread. delivered by 8 units.

Parts

Universal 1 button control

$226

Universal 1 push button handlebar control, manufactured out of machined aluminum and available for 22mm (7/8") or 25,4mm (1") diameter handlebar. The push buttons can be linked to any functions on the motorcycle. This part has a satin black powder coating, and is designed to be riveted to your handlebar. Diameter : 30mm (1 & 3/16") / Thickness : 17mm...

View

Parts

Left 3-buttons universal switch

$339

Universal handlebar controls, including :- an ON/OFF/ON turn signal switch- a push button for the horn- a push button for full headlights (may require adaptation of a relay) Available for 22mm (7/8") or 25,4mm (1") diameter handlebar. This part has a satin black powder coating, and is designed to be riveted to your handlebar.

View

-40%

Parts

Headlight struts

$15 $25

Motorcycle headlight struts, manufactured out of aluminum, to perfectly adjust the position of your headlight. The hole diameter is ø8mm, the exterior diameter is ø29mm. For Moto Guzzi V7 Classic or Heritage headlight, choose the 10mm ones. For Triumph and Royal Enfield Classic or Heritage headlight, choose the 5mm ones. Comes in pairs.

View

Parts

Tracker bar handlebars

$180

Tracker Bar handlebars, manufactured out of aluminium. This Tracker type handlebar has Ø28,6mm clamping diameter and Ø22mm controls diameter. It's 790mm wide. It offers much pullback to the rider which offers a comfortable riding position. It's available in satin black finish only.

View

-40%

Parts

Leather cable guides

$5 $9

Leather cable guide. This strap enables you fasten your cables, or tie it together to your handlebars. If just like us, your motorcycle's finish is part of your obsessions, this cable guide is perfect for your project. Available in Aged brown, Black and Gold leather. Available in 80mm, 90mm, 115mm or 130mm length. Each strap is 20mm wide. Sold as a...

View

-15%

Parts

Round mirror ø8 steel for motorcycle

$38 $44

Mini round mirror, Ø8cm diameter with M8 threading, for upper position. The mirror shaft is 13cm long, its shape was specifically designed to guaranty a good rear visibility and a discreet look. Suitable for motorcycles with M10 screwing original mirrors fixation. Sold by unit, available in satin black only. Fit both left and right sides.

View

-15%

Parts

Bates headlight

$72 $85

Bates headlight for motorcycle. This low fixation Bates style headlight is ø15cm diameter. It has a metal casing and trim ring. It's discreet and enables you get a better finish level on your motorcycle. It's available in Chromed, Satin Black or with Black casing and Brushed or Chromed trim ring. It comes with the fixation bracket designed for the model...

View

Parts

Biltwell Renegade handlebars grips

$25

Biltwell Renegade handlebar grips, produced by Biltwell for character motorcycle. It offers a better handtaking of your handlebar, a great riding comfort and an incredible look. Handlebar diameter 1" (ø25,4mm) or ø22mm. Comes in pairs. Available in Black only.

View

-15%

Parts

Heritage headlight

$95 $112

Classic headlight for motorcycle. This M8 side fixation headlight has a ø180mm diameter. The casing and trim ring are metal, the window is plastic. It offers a great finish level, it's reduced casing (only 135mm deep) will offer a more compact look to your motorcycle. It's available with a Chromed or Brushed trim ring. Depending on the motorcycle model...

View

Parts

Biltwell Thruster handlebars grips

$25

Biltwell Thruster handlebar grips, manufactured by Biltwell for character motorcycle. It offers a better handtaking of your handlebar, a great riding comfort and an incredible look. Handlebar diameter 1" (ø25,4mm) or ø22mm. Comes in pairs. Available in Black and Brown color.

View

Parts

Leather covered handlebar grips

$164

Leather covered handlebars grips. Wrapped with a high quality leather, it gives a touch of chic to your motorcycle while keeping a good takeover. Available in aged brown, gold, black and ruby leather. Four thread stitchings colors available so it perfectly fits your bike. Available for ø25,4mm (1 inch) handlebars.

View

-15%

Parts

Headlight bulb wiring extension

$18 $21

This headlight wiring harness bulb extension suits any motorcycle equipped with a H4 lighthouse bulb. It enables to connect your headlight to the motorcycle when you relocate the original wiring harness. Length : 420mm This headlight bulb extension is manufactured by ourselves at BAAK Motocyclettes workshop. It comes by default with all our headlight for...

-15%

Parts

Classic headlight

$87 $102

Round headlight for classic motorcycles, with M8 side mount and ø180mm diameter. It features metal casing and bezel, with plastic glass, offering an exceptional level of finish. Its streamlined casing gives it a resolutely classic look. Depending on the motorcycle model chosen, a plug and play harness is supplied (which may justify a price difference...

View

-15%

Parts

Resistors for LED turn indicators

$14 $17

Resistors for LED motorcycles turn indicators, essential to get a correct blinking speed once your LED blinkers are mounted on a motorcycle that isn't equipped with LED ones in stock configuration. Comes in pairs. You need two pairs to connect both front and rear turn signals on your motorcycle.

Classic ø10 round aluminum motorcycle mirror

Classic ø10 round aluminum motorcycle mirror 2

-15%

Parts

Classic ø10 round aluminum motorcycle mirror

$62 $72

Classic round motorcycle mirror. This black mirror, Ø10cm / diameter, has an impeccable yet discreet finish. It offers perfect rearward visibility and fits any motorcycle. Height-adjustable thanks to 150mm articulated rod. Supplied with two adapters (left-hand and right-hand M10x1.25 mm). Additional adapters are available as options. Approved to European...

View

Parts

Leather fork gaiters

$272

Pair of genuine leather fork gaiters. These 4, 5, 6 or 8 folds fork boots are handcrafted in France, and bring a touch of authenticity and exception to your motorcycle. It's water-repellent and especially designed to resist to an intensive use. Available in Aged brown, black, gold leather color. Diameter Ø41mm top and Ø63mm bottom. It comes in pairs with...

View

Extension for Classic ø10 round motorcycle mirror in aluminium

Extension for Classic ø10 round motorcycle mirror in aluminium 2

-15%

Parts

Extension for Classic ø10 round motorcycle mirror in aluminium

$21 $25

Shaft extension for Classic round mirror. This extension is suitable only for our Classic round mirror. This part enables you make the mirror shaft longer for a better rear view, and makes it easier to adjust. This extension is 55mm long (35mm between holes). Supplied per unit.

Aluminium turn indicators holders for license plate

Aluminium turn indicators holders for license plate 2

-40%

Parts

Turn indicators holders on license plate

$20 $34

These aluminium turn indicators holders are designed to be assembled on a BAAK license plate holder, on the motorcycle of your choice. It's available in 3 different versions : For turn indicators with øM8 shafts For turn indicators with øM10 shafts For original / accessory Triumph turn indicators (2016-...) It comes with the necessary stainless steel...

View

-15%

Parts

License plate lightning

$17 $20

LED license plate lightning. This LED license plate lightning is approved according to the ECE European standards (12V / 2W). We use it on some license plate holders manufactured at BAAK's. Measurement of the license plate lightning : Length 17mm Diameter 12mm øM8 fixation shaft.

Leather handlebar pad for motorcycle (black, brown, red, gold)

Parts

Leather handlebar pad

$85

Leather-covered handlebar pad. Appart from the protection brought by this pad in case of shock with your handlebar, his leather cover will bring a classic off road look to your motorcycle. Our craftsmen re-interpreted the codes of off road bar pads to give it an aesthetic use. The inner diameter for the crossbar is ø12mm, the external diameter of the pad...

View

BAAK black aluminium headlight brackets for motorcycles

BAAK black aluminium headlight brackets for motorcycles 2

-35%

Parts

Universal short headlight clamps for classic motorcycles

$95 $146

Headlight bracket for motorcycles, for M8 side headlight fixation, with optional front turn indicators holders. Designed and manufactured at BAAK's in France. Perfect to put a BAAK headlight on your motorcycle and improve its finish level. Ø39 - 40mm for Moto Guzzi V7I / V7 II / V7 III / V7 850 / V9 (60mm size) Ø41 - 42mm for Triumph Bonneville T100 / SE...

View

License plate holder for US format side license plates

License plate holder for US format side license plates 2

-35%

Parts

License plate holder for US format side license plates

$33 $51

This license plate holder is suitable for US size license plates (vertical) mounted in side position. It's manufactured out of 3mm thick aluminium and it's satin black powder coat painted. This part is only suitable for BAAK side license plate holders.

Double optics headlight plate for motorcycles - BAAK

Double optics headlight plate for motorcycles - BAAK 2

Parts

Universal Trail headlight plate

$526

Our universal double optics headlight plate takes its inspiration from the 80's Trail universe. Perfect for a Scrambler project, this headlight plate is designed by our team and manufactured out of glass fiber. It includes a wiring harness extension and aluminium fixation brackets supposed to be assembled on the fork tubes (ø39 - ø40mm / ø41 - ø42mm /...

View

-15%

Universal

Universal handlebars controls kit

$190 $224

This Universal handlebars controls kit is essential to clear your cockpit. Each part of the kit must be purchased separately : Brake master cylinder Throttle Clutch lever This kit designed by our craftsmen shows a perfect finish level thanks to his assembly quality and satin black powder coat painting. These parts are available for classic and vintage...

View

Front Sprocket -1 teeth for Interceptor / Continental GT 650

Front Sprocket -1 teeth for Interceptor / Continental GT 650 2

-15%

Engine & Exhaust

Front Sprocket -1 teeth for Interceptor / Continental GT 650

$55 $64

Go from 15 to 14 teeth on your PSB and gain torque across the entire rev range. The acceleration will be sharper and stronger, top speed will not be sacrificed. We equip our Royal Enfield Interceptor BAAK Aventures with these output gearbox pinion in order to be more comfortable during our off-road courses!

Mini Classic low front mudguard for Royal Enfield 650

Mini Classic low front mudguard for Royal Enfield 650 2

-20%

Front end & chassis

Mini Classic low front mudguard for Royal Enfield 650

$258 $322

This Mini Classic low front mudguard for 17'' wheel for Interceptor / GT 650 support will allow you to put a mudguard as close as possible to your 17-inch front wheel. We have designed this bracket to adapt to the new height of your front wheel and visually lower the look of your Royal Enfield. The Roadster look at your fingertips ... Made in France

View

Airbox removal kit for Royal Enfield Interceptor / Continental GT 650

Airbox removal kit for Royal Enfield Interceptor / Continental GT 650 2

-35%

Products

Airbox removal kit for Royal Enfield Interceptor / Continental GT 650

$364 $560

Give your bike a Roadster look by freeing up the space where the original airbox of your Royal Enfield Interceptor or GT use to be by replacing it with 2 air filters, a sniffer and a pair of shiny black mini side panels. This kit will create a hollow space and will visually lighten the bike. The air filters will no longer be hidden, their function is...

Parts

7’' full LED headlight Bottom Mount

$475

Lighting can significantly change the look of your motorcycle. Switch to LED with this black neo-retro headlight with daytime running light function. Beyond giving you more light to see better and be seen better, style is important! We use this headlight in particular on our BMW R NineT Street Tracker.

BAAK Large Daytona speedo for Royal Enfield 650

BAAK Large Daytona speedo for Royal Enfield 650 2

Parts

Large Daytona speedometer for Royal Enfield 650 Interceptor / Continental GT

$553

Daytona W speedometer for Royal Enfield 650 Interceptor / Continental GT (2018–...) This plug & play speedometer solution with tachometer is ideal for streamlining the cockpit of your Royal Enfield while retaining the functionality of your original speedometer. The speedometer is delivered pre-wired, with its satin black stainless steel mounting...

View

Classic headlight with large integrated Daytona speedometer for Royal Enfield 650 Interceptor / Continental GT

Parts

Classic headlight with large integrated Daytona speedometer for Royal Enfield 650...

$678

Daytona W speedometer for Royal Enfield 650 Interceptor / Continental GT (2018–...) This plug & play integrated headlight with speedometer solution is ideal for streamlining the cockpit of your Royal Enfield while retaining the functionality of your original speedometer. The speedometer is delivered pre-wired. It features a speedometer, a needle...

View

BAAK | Tiny Daytona speedo for Royal Enfield 650

BAAK | Tiny Daytona speedo for Royal Enfield 650 2

Parts

Mini Daytona speedometer for Royal Enfield 650

$417

Daytona 60 speedometer for Royal Enfield 650 Interceptor / Continental GT (2018–...) This plug & play speedometer solution is ideal for streamlining the cockpit of your Royal Enfield while retaining the functionality of your original speedometer. The speedometer is delivered pre-wired, with its harness and satin black aluminum mounting plate. Your...

Flat leather seat for Royal Enfield Interceptor / Continental GT

Parts

Flat leather seat for Royal Enfield Interceptor / Continental GT

$611

Flat leather seat for Royal Enfield Interceptor / Continental GT. This seat is handcrafted by our craftsmen at the BAAK's workshop in France, based on an original Royal Enfield seat pan so it perfectly fits your motorcycle. The shape of the leather cover makes it look very thin while keeping a good seating comfort. It's available in Aged brown, Black,...

View

Parts

Replacement BAAK exhaust mufflers

$665

Replacement BAAK exhaust mufflers are sold by pair with mounting brackets and screws. Select the model of your motorcycle and we will make these silencers that will perfectly fit to BAAK manifolds. The muffled sound remains the same, the finish equaled.

View

License plate holder for US format with light mount

License plate holder for US format with light mount 2

-35%

Parts

License plate holder for US format with light mount

$33 $51

This license plate holder is suitable for US size license plates (horizontal). It's manufactured out of 3mm thick aluminium and it's satin black powder coat painted. This support allows you to mount a license plate light. This part is only suitable for BAAK license plate holders.

Parts

Turn indicators / Brake light

$177

These minimalism aluminum turn signals keep your motorcycle clean. The rear indicators incorporate stop lights and lights. The front indicators are classic. Light is powerful. Stem øM8, 38mm long, ø22mm optical.

View

-15%

Parts

Large Leather Roll Top Pannier

$863 $1,015

Large Leather Roll Top pannier, carefully handcrafted by our leather worker for people who need pannier on their motorcycle but appreciate fine material and craftsmanship. The Rolled Top pannier is compatible with all SW-Motech SLC side carriers. (side carrier not supplied). Very detailed, this beautiful leather bag is made with BAAK leathers and suede...

View

-15%

Parts

Large Leather Messenger Bag

$863 $1,015

Discover our removable leather satchel, an exceptional piece meticulously handcrafted by our French artisans. Every detail is painstakingly executed, bearing witness to our commitment to quality. This exquisite leather goods creation is crafted from BAAK's top-quality vegetable-tanned leathers. Delivered with an adjustable and detachable strap, this...

View

Headlight brackets for original headlight for Interceptor 650

Headlight brackets for original headlight for Interceptor 650 2

-30%

Interceptor / Continental GT 650

Headlight brackets for original headlight for Interceptor 650

$102 $146

Headlight fixation brackets for Royal Enfield 650 Interceptor and Continental GT 650. This pair of headlight brackets is mounted to replace the original ones. Compatible with bulb or LED headlights. Suitable if you keep the original key switch. If you opt for our flat fork crown with relocated key switch, you can fit our small 60mm headlight brackets....

View

Harness for adaptable indicator Royal Enfield

Parts

Harness for adaptable indicator Royal Enfield

$37

This indicator wiring harness is essential for adapting new indicators to your Royal Enfield. The harness is plug & play with the original connectors of your motorcycle. This 160 mm harness is ideal for installing aftermarket indicators mounted on Japanese cylindrical male connectors ranging from ø3.2 mm to 3.7 mm.Made in France by BAAK.Sold in pairs.

US plate bracket for original mudguard Royal Enfield 650 Inter/GT

US plate bracket for original mudguard Royal Enfield 650 Inter/GT 2

-35%

Parts

US plate bracket for original mudguard Royal Enfield 650 Inter/GT

$33 $51

This plate holder is suitable for US format license plates (horizontal 170x100mm). It is made of 3mm-thick aluminum, painted with satin black epoxy paint. This plate holder is to be purchased in addition to the original fender plate holder in order to convert it to fit US plates. Made in France

Radiator guard for Royal Enfield 650 Interceptor / Continental GT

Radiator guard for Royal Enfield 650 Interceptor / Continental GT 2

-35%

Parts

Radiator guard for Royal Enfield 650 Interceptor / Continental GT

$62 $95

Protect your radiator with this protective grille specially designed for the Royal Enfield 650 Interceptor and Continental GT. Made of stainless steel, it guarantees unfailing strength. Its high-quality satin black epoxy paint ensures exceptional durability, with no risk of matification over time. Ideal as a replacement for the original grille, this...

Round handlebar mirror ø10 HIGHSIDER MONTANA-SLIM EVO SHORT

Round handlebar mirror ø10 HIGHSIDER MONTANA-SLIM EVO SHORT 2

Parts

Round Bar End mirror ø10 HIGHSIDER MONTANA-SLIM EVO SHORT

$95

Looking for a discreet, high-performance mirror? The HIGHSIDER MONTANA-SLIM EVO SHORT is for you. With a thickness of just 5 mm, a black anodized aluminum design and convex glass for optimum visibility, this mirror combines style and safety. Easy to install on handlebars from 12 to 22 mm, it complies with E standards for left- or right-hand use.

Bullet-type LED motorcycle turn indicators in black aluminum/brushed finish

Parts

Bullet-type LED motorcycle turn indicators in black aluminum/brushed finish

$88

Bullet-type motorcycle LED 10W turn signals in black aluminum with brushed trim combine elegance and efficiency. Featuring clear glass, they measure 20 mm in diameter and 36.5 mm in length. Mounting is simple, thanks to an M8mm screw fastener, and they are compatible with a 12 V system. Supplied sheathed and with ø3.2mm Japanese round crimped lugs....

View

Classic ø10 round motorcycle mirror in aluminum, long stem

Parts

Classic ø10 round motorcycle mirror in aluminum, long stem

$75

The Classic HIGHSIDER MONTANA XL round motorcycle mirror combines elegance and functionality with its timeless design. Its black anodized finish, combined with an extended 25 mm stem, offers enhanced rear visibility. Designed to improve ergonomics and guarantee a minimalist look, it's perfect for vintage and custom motorcycles. Sold individually.

-15%

Parts

Removable windshield for Royal Enfield 650 Interceptor

$785 $923

Equip your Royal Enfield 650 Interceptor with this retro-touring removable windshield kit. 2 sec to remove without tools. It includes a removable windshield and its mountings, as well as headlight brackets adapted to the original headlight. This windshield is compatible with the original headlight or any other ø180mm headlight Available in gloss black or...

View

Short seat kit rear loop for Royal Enfield 650

Short seat kit rear loop for Royal Enfield 650 2

-15%

Interceptor / Continental GT 650

Short seat kit rear loop for Royal Enfield 650

$190 $224

This rear loop is designed to shorten the back of your motorcycle, offering a sleek, minimalist style and a more compact overall silhouette. Made with a high-quality glossy black epoxy coating, it perfectly matches the frame’s color for discreet and seamless integration.

Bates Headlight with Integrated Speedometer for Royal Enfield 650 | BAAK

Bates Headlight with Integrated Speedometer for Royal Enfield 650 | BAAK 2

-15%

Parts

Bates Headlight / Integrated Speedometer for Royal Enfield 650

$667 $785

Bates Headlight with Integrated Motogadget Tiny Speedometer for Royal Enfield 650 Interceptor / Continental GT (2018–...). Built into a ø150mm Bates headlight shell, this integrated speedometer headlight is a Plug & Play solution to streamline the cockpit of your Interceptor or Continental GT while retaining all the functionalities of your original...

View

Gallinella Rear Section for Royal Enfield 650 Interceptor / Continental GT (without seat)

-40%

Royal Enfield

Gallinella Rear Section for Royal Enfield 650 Interceptor / Continental GT (without seat)

$468 $781

Make this Gallinella Tail Kit for Royal Enfield 650 Interceptor / Continental GT the centerpiece of your customization project, and transform your Royal Enfield into a timeless machine that stands out from the crowd. This kit includes: Bolt-on rear loop and cutting template Gallinella resin tail section Not compatible with the original seat

Rear Brake Master Cylinder Protection for Royal Enfield 650

-35%

Royal Enfield

Rear Brake Master Cylinder Protection for Royal Enfield 650

$26 $41

Protect your rear brake master cylinder while adding an aesthetic touch to your Royal Enfield 650 with this robust and stylish protection. Available in a brushed or satin black finish, this inox protection is designed to withstand the elements and impacts.

View

-30%

Royal Enfield

Rear Footpeg Mounting Plate for Royal Enfield 650

$95 $136

Designed to move the passenger foot pegs forward and down, making room for the installation of large saddlebags while increasing passenger comfort without interfering with the rider. This is a sturdy stainless steel plate with a satin black epoxy coating.

-35%

Parts

41mm Fork Tube Clamp Universal

$33 $51

This aluminum bracket attaches to your original fork tube, allowing you to mount accessories such as a speedometer, GPS, switch, etc. Compatible with all 41mm forks. M8 thread.

Royal Enfield

Rear Wiring Harness Only for Royal Enfield 650

$21

This wiring harness allows you to connect an aftermarket turn signal and rear light assembly to your Royal Enfield 650. It is plug & play with the original connectors of your bike. Available in short and long sizes. Designed and manufactured by our team at the BAAK workshop.

Parts

VANS 22mm Handlebar Grips

$33

Vans handlebar grips for motorcycles, right and left. Featuring the classic waffle sole pattern of Vans® and constructed from ODI's exclusive grip compounds. For handlebars with a 22mm diameter, also available below in ø25mm. Sold in pairs.

Royal Enfield Interceptor / Continental GT 650 Airbox Removal Kit for Original Battery

-35%

Interceptor / Continental GT 650

Royal Enfield Interceptor / Continental GT 650 Airbox Removal Kit for Original Battery

$364 $560

Give your motorcycle a Roadster look by freeing up the space of the original airbox on your Royal Enfield Interceptor or Continental GT by replacing it with this airbox removal kit. This kit creates a hollow space, visually lightening the motorcycle. The air filters will no longer be hidden, revealing their function. This kit includes: 2 air filters 1...

-20%

Parts

Flat Track handlebars Ø22mm

$81 $102

Flat Track handlebar ø22mm manufactured out of steel, it enables you to get a more comfortable driving position and a better look. This handlebar has much pullback to the rider, and his flat Track look will make your bike handle better. Available in Ø22mm diameter only, and in Chromed or Brushed finish.

View

Air filters for Royal Enfield 650 Interceptor / Continental GT

Air filters for Royal Enfield 650 Interceptor / Continental GT 2

-20%
New

Home

Air filters for Royal Enfield 650 Interceptor / Continental GT

$98 $122

This pair of air filters will give your machine a retro aesthetic while maintaining perfect filtration quality. They are notably included in our air box removal kits. This kit includes: 2 air filters a breather Made in France, exclusively for BAAK.

Parts

Mini LED turn signal mo.blaze Pin

$61

Motogadget LED mini indicator 3W minimalist design in aluminum with Ø8mm stem. When off, the indicators are almost invisible, yet they offer ideal brightness when in use. We use them on most of our custom builds. Each indicator is crimped in our workshop with Japanese terminals to simplify installation on your motorcycle. Indicator dimensions: 19.5mm x...

Bike stand raiser for Royal Enfield 650 Interceptor / Continental GT

Bike stand raiser for Royal Enfield 650 Interceptor / Continental GT 2

-35%
New

Interceptor / Continental GT 650

Bike stand raiser for Royal Enfield 650 Interceptor / Continental GT

$49 $75

Say goodbye to excessive lean on your Royal Enfield 650 Interceptor or Continental GT (2018-...) This kickstand extends the length of your original kickstand by 20 mm. Perfect for bikes with upgraded shocks or large tires, this machined aluminum accessory finished in satin black epoxy is durable and elegant. Made in France

Green Filter Replacement Air Filter for Royal Enfield 650 Interceptor / Continental GT

Home

Green Filter Replacement Air Filter for Royal Enfield 650 Interceptor / Continental GT

$78

Optimize your motorcycle's performance with this Green Filter sports air filter, designed with double-layer oiled cotton for superior airflow and optimal filtration. Simple maintenance with the Green Filter kit (optional). Easy installation: directly replaces the original filter.More power, more torque, less fuel consumption.Washable and reusable for...

Royal Enfield 650 Interceptor and Continental GT classic front and rear mudguard pack

Royal Enfield 650 Interceptor and Continental GT classic front and rear mudguard pack 2

-10%
New
Pack

Home

Royal Enfield 650 Interceptor and Continental GT classic front and rear mudguard pack

$428 $475

BAAK offers a front and rear mudguard pack to personalize your Royal Enfield with harmony and character. This pack includes : - A Classic front mudguard (available with or without extension kit) - Classic rear mudguard - Choice of rear turn signal bracket (on shock absorber axles or on license plate bracket) - License plate holder - Plug & play wiring...

View