Best sellers

Showing 1-53 of 53 item(s)

Motorcycle mirror under handlebars round ø8 in steel

Motorcycle mirror under handlebars round ø8 in steel 2

-15%

Parts

Motorcycle mirror under handlebars round ø8 in steel

$45 $53

Mini black Ø80mm bike mirror especially designed to be mounted below the handlebar in lower position. It offers a very discreet look and a good rear visibility with its wide angle glass. Available without adapter (for Ø8mm through shaft mounting or with adapter for ø22mm handlebars). Sold individually. Fit both left and right sides, available in satin...

View

-30%

Parts

BAAK N°1 handlebars Ø25,4mm

$130 $186

Wide stainless steel BAAK N°1 handlebars in Ø25,4mm (1 inch). It's flatter, wider and has more pullback / sweep to the rider than most of the other handlebars. It will offer a very distinguished look to your motorcycle, and improve its handling qualities and your riding position. It's available in Satin black and Brushed finish. The stainless steel tubes...

View

-15%

Parts

Round mirror ø8 steel for motorcycle

$39 $46

Mini round mirror, Ø8cm diameter with M8 threading, for upper position. The mirror shaft is 13cm long, its shape was specifically designed to guaranty a good rear visibility and a discreet look. Suitable for motorcycles with M10 screwing original mirrors fixation. Sold by unit, available in satin black only. Fit both left and right sides.

View

-40%

Parts

Leather cable guides

$6 $9

Leather cable guide. This strap enables you fasten your cables, or tie it together to your handlebars. If just like us, your motorcycle's finish is part of your obsessions, this cable guide is perfect for your project. Available in Aged brown, Black and Gold leather. Available in 80mm, 90mm, 115mm or 130mm length. Each strap is 20mm wide. Sold as a...

View

Aluminium handlebar grips for motocycles classic, vintage, cafe racer

Aluminium handlebar grips for motocycles classic, vintage, cafe racer 2

-40%

Parts

Motorcycle handlebar mounts, aluminum

$67 $112

Machined aluminium handlebar clamps for motorcycle. These risers are available in ø22mm diameter, ø28,6mm diameter or 1 inch (ø25,4mm) diameter, it's lighter and elegant. The clamps are satin black powder coat painted, and come with stainless steel screwing (size on the choice). Designed and manufactured at BAAK's workshop. Made in France

View

Round handlebar mirror ø10 HIGHSIDER MONTANA-SLIM EVO SHORT

Round handlebar mirror ø10 HIGHSIDER MONTANA-SLIM EVO SHORT 2

Parts

Round Bar End mirror ø10 HIGHSIDER MONTANA-SLIM EVO SHORT

$98

Looking for a discreet, high-performance mirror? The HIGHSIDER MONTANA-SLIM EVO SHORT is for you. With a thickness of just 5 mm, a black anodized aluminum design and convex glass for optimum visibility, this mirror combines style and safety. Easy to install on handlebars from 12 to 22 mm, it complies with E standards for left- or right-hand use.

Relocated ignition switch bracket for Royal Enfield 650 Interceptor / Continental GT

Relocated ignition switch bracket for Royal Enfield 650 Interceptor / Continental GT 2

-30%

Interceptor / Continental GT 650

Relocated ignition switch bracket for Royal Enfield 650 Interceptor / Continental GT

$32 $46

Ignition switch relocation kit for Royal Enfield 650 Interceptor / Continental GT (2018-...). this kit is necessary to relocate the ignition switch from its original position to under your injection system, on the right side of your Royal Enfield. It includes an inox bracket and the wiring harness extension. The relocation of your ignition switch...

Wide Flat Track handlebar kit for Royal Enfield 650 Interceptor

Wide Flat Track handlebar kit for Royal Enfield 650 Interceptor 2

-15%

Interceptor / Continental GT 650

Flat Track handlebars kit for Royal Enfield 650 Interceptor

$298 $350

Flat Track Handlebar Kit for Royal Enfield 650 Interceptor / Continental GT 650 (2018-present). This kit includes: - a wide Flat Track steel handlebar (brushed or polished finish) - an extended brake line - a pair of long throttle cables - a long clutch cable - a pair of ø22mm handlebar risers With a wider handlebar that has more pullback towards the...

View

Classic ø10 round aluminum motorcycle mirror

Classic ø10 round aluminum motorcycle mirror 2

-15%

Parts

Classic ø10 round aluminum motorcycle mirror

$64 $75

Classic round motorcycle mirror. This black mirror, Ø10cm / diameter, has an impeccable yet discreet finish. It offers perfect rearward visibility and fits any motorcycle. Height-adjustable thanks to 150mm articulated rod. Supplied with two adapters (left-hand and right-hand M10x1.25 mm). Additional adapters are available as options. Approved to European...

View

Long cables kit for Royal Enfield 650 Interceptor / Continental GT

Interceptor / Continental GT 650

Long cables kit for Royal Enfield 650 Interceptor / Continental GT

$39

Long cables kit for Royal Enfield 650 Interceptor / Continental GT. This kit includes a long front brake hose, a pair of throttle cables and a clutch cable, all compatible with your motorcycle. It enables you mount a wider handlebar on your Royal Enfield. Each part of the kit can be purchased separately. The choice of variant (2024 - now) corresponds...

View

-70%

Home

T-shirt Welcome BAAK "Ivory"

$10 $34

T-shirt "Welcome BAAK" Ivory. This t-shirt is THE essential basic of the collection. It's manufactured out of bio cotton and has a Slim cut. The BAAK logo is embroidered on the chest. It's marine blue color with the white BAAK logo. It's mixed, both Him and Her will proudly wear it. Size S is more suitable for a child aged 12-14

View

-70%

Home

T-shirt Welcome BAAK "Grey"

$10 $34

T-shirt "Welcome BAAK" Grey. This t-shirt is THE essential basic of the collection. It's manufactured out of bio cotton and has a Slim cut. The BAAK logo is embroidered on the chest. It's grey color with the marine blue BAAK logo. It's mixed, both Him and Her will proudly wear it. Size S is more suitable for a child aged 12-14

View

Relocated ignition switch control bracket for Triumph (2016)

-35%

Triumph

Relocated ignition switch control bracket for Triumph (2016)

$23 $35

Ignition switch control relocation bracket for Triumph (2016-... - liquid-cooled). It enables to relocate the ignition switch control under the gas tank. Manufactured in inox laser cut. You'll be obliged to relocate your wiring harness under your gas tank. Comes with all the necessary stainless steel screwing. The relocation of your ignition switch...

Parts

Mirror adapter

$18

Handlebar adapters, required to mount some mirrors on your handlebar. We offer two different solutions : Adapter for ø22mm handlebars, to mount our mirrors in underbar position (M10 threading) Through rod type adapter, to mount a mirror on a through rod type fixation in classic or underbar position

View

-70%

Home

T-shirt Welcome BAAK "Marine"

$10 $34

T-shirt "Welcome BAAK" Marine blue. This t-shirt is THE essential basic of the collection. It's manufactured out of bio cotton and has a Slim cut. The BAAK logo is embroidered on the chest. It's marine blue color with the white BAAK logo. It's mixed, both Him and Her will proudly wear it. Size S is more suitable for a child aged 12-14

View

-20%

Parts

Flat Track handlebars Ø22mm

$84 $105

Flat Track handlebar ø22mm manufactured out of steel, it enables you to get a more comfortable driving position and a better look. This handlebar has much pullback to the rider, and his flat Track look will make your bike handle better. Available in Ø22mm diameter only, and in Chromed or Brushed finish.

View

Parts

Biltwell Renegade handlebars grips

$26

Biltwell Renegade handlebar grips, produced by Biltwell for character motorcycle. It offers a better handtaking of your handlebar, a great riding comfort and an incredible look. Handlebar diameter 1" (ø25,4mm) or ø22mm. Comes in pairs. Available in Black only.

View

Triumph

Long cables kit for Triumph (2016)

$98

Long cables kit for Triumph (2016-...), it enables to mount wide handlebars on your motorcycle. This kit includes the front brake hose extension and the clutch cable. We use it on most of our custom Triumph builds.

View

Classic ø10 round motorcycle mirror in aluminum, long stem

Parts

Classic ø10 round motorcycle mirror in aluminum, long stem

$77

The Classic HIGHSIDER MONTANA XL round motorcycle mirror combines elegance and functionality with its timeless design. Its black anodized finish, combined with an extended 25 mm stem, offers enhanced rear visibility. Designed to improve ergonomics and guarantee a minimalist look, it's perfect for vintage and custom motorcycles. Sold individually.

Headlight brackets for original headlight for Interceptor 650

Headlight brackets for original headlight for Interceptor 650 2

-30%

Interceptor / Continental GT 650

Headlight brackets for original headlight for Interceptor 650

$106 $151

Headlight fixation brackets for Royal Enfield 650 Interceptor and Continental GT 650. This pair of headlight brackets is mounted to replace the original ones. Compatible with bulb or LED headlights. Suitable if you keep the original key switch. If you opt for our flat fork crown with relocated key switch, you can fit our small 60mm headlight brackets....

View

-70%

Home

T-shirt BAAK Pocket "BMW"

$10 $34

T-shirt "BAAK Pocket" BMW. This t-shirt is manufactured out of biologic cotton. It has a pocket on the left side of the chest with a black embroidered pattern, and our BMW NineT Bobber silk-screen printed on the back. This t-shirt has a Slim cut, the fabric is white color. It's mixed, both Him and Her will proudly wear it. Size S is more suitable for a...

View

Relocated ignition switch control bracket kit for Triumph (pre- 2016)

-35%

Triumph

Relocated ignition switch control bracket kit for Triumph (pre- 2016)

$37 $57

Relocated ignition switch control bracket for Triumph (pre-2016 - air-cooled). This simple ignition switch support enables you to relocate the ignition control between the fuel tank and the left carburetor. Fits on the right side on the injection models (EFI). It requires to move the wiring harness that is in your headlight, under the gas tank, without...

Handlebar clamps for Royal Enfield 650 Interceptor / Continental GT

Handlebar clamps for Royal Enfield 650 Interceptor / Continental GT 2

-40%

Interceptor / Continental GT 650

Handlebar clamps for Royal Enfield 650 Interceptor / Continental GT

$67 $112

Machined aluminium handlebar clamps for Royal Enfield 650 Interceptor / Continental GT. These risers are available in ø22mm diameter, ø28,6mm diameter or 1 inch (ø25,4mm) diameter, it's lighter and elegant. The clamps are satin black powder coat painted, and come with all the stainless steel screwing kit compatible with your motorcycle. Designed and...

View

Parts

Leather covered handlebar grips

$170

Leather covered handlebars grips. Wrapped with a high quality leather, it gives a touch of chic to your motorcycle while keeping a good takeover. Available in aged brown, gold, black and ruby leather. Four thread stitchings colors available so it perfectly fits your bike. Available for ø25,4mm (1 inch) handlebars.

View

Leather handlebar pad for motorcycle (black, brown, red, gold)

Parts

Leather handlebar pad

$88

Leather-covered handlebar pad. Appart from the protection brought by this pad in case of shock with your handlebar, his leather cover will bring a classic off road look to your motorcycle. Our craftsmen re-interpreted the codes of off road bar pads to give it an aesthetic use. The inner diameter for the crossbar is ø12mm, the external diameter of the pad...

View

Parts

Tracker bar handlebars

$186

Tracker Bar handlebars, manufactured out of aluminium. This Tracker type handlebar has Ø28,6mm clamping diameter and Ø22mm controls diameter. It's 790mm wide. It offers much pullback to the rider which offers a comfortable riding position. It's available in satin black finish only.

View

Parts

Biltwell Thruster handlebars grips

$26

Biltwell Thruster handlebar grips, manufactured by Biltwell for character motorcycle. It offers a better handtaking of your handlebar, a great riding comfort and an incredible look. Handlebar diameter 1" (ø25,4mm) or ø22mm. Comes in pairs. Available in Black and Brown color.

View

Classic headlight with large integrated Daytona speedometer for Royal Enfield 650 Interceptor / Continental GT

Parts

Classic headlight with large integrated Daytona speedometer for Royal Enfield 650...

$702

Daytona W speedometer for Royal Enfield 650 Interceptor / Continental GT (2018–...) This plug & play integrated headlight with speedometer solution is ideal for streamlining the cockpit of your Royal Enfield while retaining the functionality of your original speedometer. The speedometer is delivered pre-wired. It features a speedometer, a needle...

View

Mini speedometer for Royal Enfield 650 Interceptor and Continental GT

Mini speedometer for Royal Enfield 650 Interceptor and Continental GT 2

-15%

Interceptor / Continental GT 650

Motogadget Tiny Speedometer for Royal Enfield 650 Interceptor / Continental GT

$446 $525

Tiny Speedometer for Royal Enfield 650 Interceptor / Continental GT (2018–...). This plug & play speedometer solution is ideal for streamlining the cockpit of your Royal Enfield while keeping all the functionalities of your original speedometer. The speedometer comes pre-wired, with its harness and satin black aluminum mounting bracket. Your...

View

-70%

T-shirt BAAK Helmet "Grey"

$14 $46

T-shirt BAAK Helmet "Grey". The importance of this t-shirt can be found in the details : a helmet is cross-stitch embroidered, true to BAAK's work. It's available in two colors. The t-shirt is grey color, the helmet embroidered on the chest is in shades of orange. It's mixed, both Him and Her will proudly wear it.

View

Tiny Motogadget speedo fixation bracket for Triumph (pre- 2016)

-30%

Triumph

Tiny Motogadget speedo fixation bracket for Triumph (pre- 2016)

$40 $57

Tiny Motogadget speedometer fixation bracket for Triumph (pre-2016). It's a machined aluminium bracket, satin black powder coated. This part comes with all the necessary screwing.

View

Triumph

Classic Headlight / Integrated Speedometer for Triumph (pre-2016)

$984

Classic headlight with integrated speedometer for Triumph (before 2016 – air-cooled) This needle speedometer, integrated into a Ø180mm satin black metal headlight with M8 side mounts, is the ideal way to visually lighten the front of your bike while retaining advanced speedometer functionalities. This speedometer is offered in a plug & play version,...

View

Heating grips removal kit for Triumph Bonneville T120 (2016-...)

-15%

Triumph

Heating grips removal kit for Triumph T120 (2016)

$54 $63

Heating grips removal kit for Triumph Bonneville T120 (2016-...). This grips kit enables you assemble any handlebar on your T120 without having to cut notches in it to put the heated grips system back on. The grips are high quality Biltwell Thruster or Renegade ones (25,4mm diameter) which offer more comfort. Comes in pairs.

View

-20%

Moto Guzzi

Medium front mudguard for Moto Guzzi V7

$155 $193

Medium front mudguard for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9, manufactured out of stainless steel. It's short but it's still long enough to protect you from the front wheel splashes. It's pre-drilled so it fits the original fixation system of your motorcycle. It's designed and manufactured by our team at the workshop in France. It's available...

View

Bates Headlight with Integrated Speedometer for Royal Enfield 650 | BAAK

Bates Headlight with Integrated Speedometer for Royal Enfield 650 | BAAK 2

-15%

Parts

Bates Headlight / Integrated Speedometer for Royal Enfield 650

$691 $813

Bates Headlight with Integrated Motogadget Tiny Speedometer for Royal Enfield 650 Interceptor / Continental GT (2018–...). Built into a ø150mm Bates headlight shell, this integrated speedometer headlight is a Plug & Play solution to streamline the cockpit of your Interceptor or Continental GT while retaining all the functionalities of your original...

View

Quad Lock Pro Aluminium Motorcycle Phone Holder - Handlebar mount - BAAK

Quad Lock Pro Aluminium Motorcycle Phone Holder - Handlebar mount - BAAK 2

-15%

Parts

Quad Lock Pro Aluminium Motorcycle Phone Holder Handlebar mount

$70 $82

Give your bike the best smartphone mount with the Quad Lock Pro Aluminium. Carefully selected by the BAAK Atelier team for its sleek design, this mount represents the top-of-the-range version of the Quad Lock brand (Pro version). Manufacturer reference : QLM-HBR-PRO

Removable windshield for Triumph Bonneville T100 / T120

Removable windshield for Triumph Bonneville T100 / T120 2

-15%

Parts

Removable windshield for Triumph Bonneville T100 / T120

$812 $956

Equip your Triumph Bonneville T100/T120 with this retro-touring removable windscreen kit. 2 sec to remove without tools.It includes a removable windshield and its mountings, as well as headlight brackets adapted to the original model. This windshield is compatible with the original headlight or any other ø180mm headlight. Not compatible with Triumph...

View

Bates headlight plate with leather collars for Royal Enfield Interceptor / Continental GT 650

-30%

Interceptor / Continental GT 650

Bates headlight plate for Royal Enfield 650 Interceptor / Continental GT

$135 $193

Bates headlight plate for Royal Enfield 650 Interceptor / Continental GT (2018-...). Attention, this part is only compatible with our Flat triple trees kit, it requires to move the ignition switch under the gas tank. Manufactured out of aluminium, this plate comes to hide the steering column and cables left visible after the assembly of a Bates...

View

Triumph

Bates headlight / integrated speedometer for Triumph (2016-...)

$1,581

Bates headlight / integrated speedometer for Triumph (2016-... / Liquid cooling) Integrated into the housing of a ø150mm Bates headlight, this motogadget Tiny Plug & Play speedometer is a simple solution to streamline the cockpit of your Triumph while retaining the information from your original speedometer. The assembly is delivered pre-wired, with...

View

Mini speedometer Triumph Street Twin / Scrambler / Bonneville T120 / T100

-15%

Triumph

Motogadget Tiny Speedometer for Triumph (2016–...)

$1,224 $1,441

Mini Speedometer for Triumph (2016–... / Liquid-cooled) This Plug & Play mini speedometer is THE solution to clean up your Triumph cockpit while retaining all original speedometer information.It comes with mounting plates for installation on one of the fork tubes or under the top triple clamp (if you have a BAAK triple clamp). The dial is available in...

View

Extension for Classic ø10 round motorcycle mirror in aluminium

Extension for Classic ø10 round motorcycle mirror in aluminium 2

-15%

Parts

Extension for Classic ø10 round motorcycle mirror in aluminium

$22 $26

Shaft extension for Classic round mirror. This extension is suitable only for our Classic round mirror. This part enables you make the mirror shaft longer for a better rear view, and makes it easier to adjust. This extension is 55mm long (35mm between holes). Supplied per unit.

Triumph

Bates headlight / integrated speedometer for Triumph (pre-2016)

$761

Bates headlight with integrated motogadget Tiny speedometer for Triumph (pre-2016 – air-cooled) Integrated into the housing of a ø150mm Bates headlight, this headlight with integrated speedometer is a Plug & Play solution to streamline your cockpit while keeping the functions of your original speedometer. This speedometer comes in a plug & play...

View

Daytona Triumph counter, Café Racer prep, Made in France

Daytona Triumph counter, Café Racer prep, Made in France 2

Parts

Mini Daytona speedometer for Triumph (2016–...)

$1,131

Mini Daytona speedometer for Triumph (2016–... / Liquid-cooled) The 60mm Daytona mini speedometer mounts on the original handlebar clamps of modern Triumphs (2016–...): T120, T100, Speed Twin 900, Scrambler 900 This is a 100% plug & play accessory. It includes a bracket, necessary screws, and a multiplexing unit. Pre-wired in our workshop, it installs...

View

-15%

Universal

Universal handlebars controls kit

$197 $232

This Universal handlebars controls kit is essential to clear your cockpit. Each part of the kit must be purchased separately : Brake master cylinder Throttle Clutch lever This kit designed by our craftsmen shows a perfect finish level thanks to his assembly quality and satin black powder coat painting. These parts are available for classic and vintage...

View

Black adjustable shock absorber for BMW R 1200 NineT by BAAK

Black adjustable shock absorber for BMW R 1200 NineT by BAAK 2

Parts

Shock absorber for BMW NineT

$492

Big Body shock absorber for BMW R 1200 NineT 1200 (2017-...). This mono shock absorber is manufactured in France by our partner Shock Factory. It offers a finish level and look that can't be compared to the original one. It's easy to adjust thanks to one only synchronized knob which adjust both compression and relaxation (48 different levels of setting)...

Triumph

Classic Headlight / Integrated Speedometer for Triumph (2016–...)

$1,757

Classic Headlight / Integrated Speedometer for Triumph (2016–... – Liquid-cooled) Integrated into the housing of a ø180mm Classic headlight with M8 side mounts, this Plug & Play speedometer is a simple solution to streamline the cockpit of your Triumph while keeping the original information display and ensuring optimal readability. The speedometer...

View

Headlight plate for Bates Headlight for Triumph (2016-...)

-30%

Triumph

Bates headlight plate for Triumph (2016)

$139 $198

Bates headlight plate for Triumph (since 2016 - liquid-cooled). This aluminium plate comes to hide the steering column and cables running around after you mounted a Bates headlight (with lower fixation) on your Triumph. The 4 leather collars (brown, black, gold or ruby color) attach the plate to your fork tubes. Available in Satin black or Brushed...

View

-15%

BMW

Air filters kit for BMW NineT

$277 $326

Air filters kit for BMW NineT. This kit includes two black air filters and a red oil breather. The air filters plug directly on the intake, in place of the original air intake pipes of your BMW NineT. No power or torque improvement with this kit, it's simply an aesthetic modification. We recommend you to go for our Aluminium battery box along with this...

Speedometer lowering kit for BMW NineT 2

-40%

BMW

Speedometer lowering kit for BMW NineT

$15 $26

Lowering kit for BMW NineT speedometer. These 4 struts enable you lower your original NineT speedometer by 10mm, to get a clear riding post. Suitable for BMW NineT Pure, Scrambler, Racer and Urban GS.

-70%

T-shirt BAAK Helmet "Olive"

$14 $46

T-shirt BAAK Helmet "Olive". The importance of this t-shirt can be found in the details : a helmet is cross-stitch embroidered, true to BAAK's work. It's available in two colors. The t-shirt is olive green color, the helmet embroidered on the chest is in shades of blue. It's mixed, both Him and Her will proudly wear it.

View

Classic Headlight / Integrated Universal Speedometer

Parts

Classic Headlight / Integrated Universal Speedometer

$794

Classic Headlight with Integrated Universal Speedometer. The satin black metal headlight shell Ø180mm features M8 side mounts. Available with Black, Brushed, or Chrome bezel. The speedometer is manufactured by Acewell. It can be easily programmed according to your wheel diameter. Installing the speedometer requires motorcycle electronics knowledge. The...

View

Universal

Bates Headlight / Integrated Universal Speedometer

$527

This universal Bates headlight with integrated motogadget Tiny speedometer allows you to streamline your cockpit while keeping all the original functionalities of a speedometer. The mini analog speedometer displays total and daily mileage, turn signal indicator, oil pressure, high beam, and neutral light. The speedometer control button is discreetly...

View

Parts

Left 3-buttons universal switch

$351

Universal handlebar controls, including :- an ON/OFF/ON turn signal switch- a push button for the horn- a push button for full headlights (may require adaptation of a relay) Available for 22mm (7/8") or 25,4mm (1") diameter handlebar. This part has a satin black powder coating, and is designed to be riveted to your handlebar.

View