Best sellers

Showing 1-98 of 98 item(s)

Motorcycle mirror under handlebars round ø8 in steel

Motorcycle mirror under handlebars round ø8 in steel 2

-15%

Parts

Motorcycle mirror under handlebars round ø8 in steel

€38.25 €45.00

Mini black Ø80mm bike mirror especially designed to be mounted below the handlebar in lower position. It offers a very discreet look and a good rear visibility with its wide angle glass. Available without adapter (for Ø8mm through shaft mounting or with adapter for ø22mm handlebars). Sold individually. Fit both left and right sides, available in satin...

View

-40%

Parts

Leather cable guides

€4.80 €8.00

Leather cable guide. This strap enables you fasten your cables, or tie it together to your handlebars. If just like us, your motorcycle's finish is part of your obsessions, this cable guide is perfect for your project. Available in Aged brown, Black and Gold leather. Available in 80mm, 90mm, 115mm or 130mm length. Each strap is 20mm wide. Sold as a...

View

-30%

Parts

BAAK N°1 handlebars Ø25,4mm

€111.30 €159.00

Wide stainless steel BAAK N°1 handlebars in Ø25,4mm (1 inch). It's flatter, wider and has more pullback / sweep to the rider than most of the other handlebars. It will offer a very distinguished look to your motorcycle, and improve its handling qualities and your riding position. It's available in Satin black and Brushed finish. The stainless steel tubes...

View

-15%

Parts

Round mirror ø8 steel for motorcycle

€33.15 €39.00

Mini round mirror, Ø8cm diameter with M8 threading, for upper position. The mirror shaft is 13cm long, its shape was specifically designed to guaranty a good rear visibility and a discreet look. Suitable for motorcycles with M10 screwing original mirrors fixation. Sold by unit, available in satin black only. Fit both left and right sides.

View

Classic ø10 round aluminum motorcycle mirror

Classic ø10 round aluminum motorcycle mirror 2

-15%

Parts

Classic ø10 round aluminum motorcycle mirror

€54.40 €64.00

Classic round motorcycle mirror. This black mirror, Ø10cm / diameter, has an impeccable yet discreet finish. It offers perfect rearward visibility and fits any motorcycle. Height-adjustable thanks to 150mm articulated rod. Supplied with two adapters (left-hand and right-hand M10x1.25 mm). Additional adapters are available as options. Approved to European...

View

Aluminium handlebar grips for motocycles classic, vintage, cafe racer

Aluminium handlebar grips for motocycles classic, vintage, cafe racer 2

-40%

Parts

Motorcycle handlebar mounts, aluminum

€57.60 €96.00

Machined aluminium handlebar clamps for motorcycle. These risers are available in ø22mm diameter, ø28,6mm diameter or 1 inch (ø25,4mm) diameter, it's lighter and elegant. The clamps are satin black powder coat painted, and come with stainless steel screwing (size on the choice). Designed and manufactured at BAAK's workshop. Made in France

View

Moto Guzzi V7 850/V9 Skid Plate - Stainless Steel, Brushed or Black Satin

Moto Guzzi V7 850/V9 Skid Plate - Stainless Steel, Brushed or Black Satin 2

-35%

Parts

Engine protection for Moto Guzzi V7 850 - V9 (Euro 5)

€64.35 €99.00

Protect your Moto Guzzi V7 850, or V9 (Euro 5 Starting 2021) engine with this stainless steel skid plate. Available in two finishes: brushed or sleek satin black epoxy paint. Durable, stylish, and easy to install with all necessary mounting hardware included. It’s the perfect combo of looks and practicality, keeping your bike safe while turning heads....

View

Round handlebar mirror ø10 HIGHSIDER MONTANA-SLIM EVO SHORT

Round handlebar mirror ø10 HIGHSIDER MONTANA-SLIM EVO SHORT 2

Parts

Round Bar End mirror ø10 HIGHSIDER MONTANA-SLIM EVO SHORT

€84.00

Looking for a discreet, high-performance mirror? The HIGHSIDER MONTANA-SLIM EVO SHORT is for you. With a thickness of just 5 mm, a black anodized aluminum design and convex glass for optimum visibility, this mirror combines style and safety. Easy to install on handlebars from 12 to 22 mm, it complies with E standards for left- or right-hand use.

Relocated ignition switch bracket for Royal Enfield 650 Interceptor / Continental GT

Relocated ignition switch bracket for Royal Enfield 650 Interceptor / Continental GT 2

-30%

Interceptor / Continental GT 650

Relocated ignition switch bracket for Royal Enfield 650 Interceptor / Continental GT

€27.30 €39.00

Ignition switch relocation kit for Royal Enfield 650 Interceptor / Continental GT (2018-...). this kit is necessary to relocate the ignition switch from its original position to under your injection system, on the right side of your Royal Enfield. It includes an inox bracket and the wiring harness extension. The relocation of your ignition switch...

Wide Flat Track handlebar kit for Royal Enfield 650 Interceptor

Wide Flat Track handlebar kit for Royal Enfield 650 Interceptor 2

-15%

Interceptor / Continental GT 650

Flat Track handlebars kit for Royal Enfield 650 Interceptor

€254.15 €299.00

Flat Track Handlebar Kit for Royal Enfield 650 Interceptor / Continental GT 650 (2018-present). This kit includes: - a wide Flat Track steel handlebar (brushed or polished finish) - an extended brake line - a pair of long throttle cables - a long clutch cable - a pair of ø22mm handlebar risers With a wider handlebar that has more pullback towards the...

View

Radiator guard for Triumph (2016-...) T120 - T100 - Speed Twin 900

Radiator guard for Triumph (2016-...) T120 - T100 - Speed Twin 900 2

-40%

Parts

Radiator guard for Triumph (2016)

€50.40 €84.00

Protect your Triumph Bonneville (2016-...) radiator with this high-quality stainless steel guard, coated in premium satin black epoxy paint. Designed to last, it offers optimal protection without compromising engine cooling. Comes with stainless steel mounting hardware. Made in France

Long cables kit for Royal Enfield 650 Interceptor / Continental GT

Interceptor / Continental GT 650

Long cables kit for Royal Enfield 650 Interceptor / Continental GT

€33.16

Long cables kit for Royal Enfield 650 Interceptor / Continental GT. This kit includes a long front brake hose, a pair of throttle cables and a clutch cable, all compatible with your motorcycle. It enables you mount a wider handlebar on your Royal Enfield. Each part of the kit can be purchased separately. The choice of variant (2024 - now) corresponds...

View

-35%

Triumph

Rectifier bracket for Triumph (2016)

€29.25 €45.00

Rectifier bracket for Triumph (2016-... - liquid-cooled). This bracket enables you to relocate your rectifier behind your engine oil cooler instead of the lower fork trees to lighten the front of your bike. Manufactured out of stainless steel laser cut. You'll be obliged to relocate your wiring harness under your gas tank. Comes with all the necessary...

Relocated ignition switch control bracket for Triumph (2016)

-35%

Triumph

Relocated ignition switch control bracket for Triumph (2016)

€19.50 €30.00

Ignition switch control relocation bracket for Triumph (2016-... - liquid-cooled). It enables to relocate the ignition switch control under the gas tank. Manufactured in inox laser cut. You'll be obliged to relocate your wiring harness under your gas tank. Comes with all the necessary stainless steel screwing. The relocation of your ignition switch...

Triumph

Long cables kit for Triumph (2016)

€84.00

Long cables kit for Triumph (2016-...), it enables to mount wide handlebars on your motorcycle. This kit includes the front brake hose extension and the clutch cable. We use it on most of our custom Triumph builds.

View

-20%

Parts

Flat Track handlebars Ø22mm

€72.00 €90.00

Flat Track handlebar ø22mm manufactured out of steel, it enables you to get a more comfortable driving position and a better look. This handlebar has much pullback to the rider, and his flat Track look will make your bike handle better. Available in Ø22mm diameter only, and in Chromed or Brushed finish.

View

Parts

Mirror adapter

€15.00

Handlebar adapters, required to mount some mirrors on your handlebar. We offer two different solutions : Adapter for ø22mm handlebars, to mount our mirrors in underbar position (M10 threading) Through rod type adapter, to mount a mirror on a through rod type fixation in classic or underbar position

View

Aluminium intake cover for Royal Enfield 650 Interceptor / Continental GT

Aluminium intake cover for Royal Enfield 650 Interceptor / Continental GT 2

-40%

Interceptor / Continental GT 650

Aluminium intake covers for Royal Enfield 650 Interceptor / Continental GT

€39.00 €65.00

Pair of aluminium intake covers for Royal Enfield 650. These covers come in place of the original ones to give a better aesthetic look to your motorcycle. It comes by pair. It's available in Satin black and Brushed finish. It comes with all the necessary mounting hardware.

View

-15%

Parts

Leather Conditioner

€15.30 €18.00

This leather conditioner is a nourishing milk. It penetrates and nourishes the leather. You can use it for your saddles but also for your other leather products : shoes, jackets, gloves, saddlebags, etc. It comes with all the seat we offer. Capacity : 100 ml.

Parts

Biltwell Renegade handlebars grips

€22.00

Biltwell Renegade handlebar grips, produced by Biltwell for character motorcycle. It offers a better handtaking of your handlebar, a great riding comfort and an incredible look. Handlebar diameter 1" (ø25,4mm) or ø22mm. Comes in pairs. Available in Black only.

View

Triumph

Short leather seat kit for Triumph (2016)

€1,290.00

Short leather seat kit for Triumph (2016-... - liquid-cooled). It enables you reduce the original seat length to get a more compact look and the elegance of a leather seat while keeping two seatings. It comes with: Machined aluminium short subframe system (no welding) Genuine short leather seat Stainless steel mudguard with plate holder and bates...

View

Classic ø10 round motorcycle mirror in aluminum, long stem

Parts

Classic ø10 round motorcycle mirror in aluminum, long stem

€66.00

The Classic HIGHSIDER MONTANA XL round motorcycle mirror combines elegance and functionality with its timeless design. Its black anodized finish, combined with an extended 25 mm stem, offers enhanced rear visibility. Designed to improve ergonomics and guarantee a minimalist look, it's perfect for vintage and custom motorcycles. Sold individually.

Airbox removal kit for Triumph Bobber (2017)

Airbox removal kit for Triumph Bobber (2017) 2

-30%

Bonneville Bobber (2017 -...)

Airbox removal kit for Triumph Bobber (2017)

€157.50 €225.00

This airbox removal kit for Triumph Bonneville Bobber (2017-...) enables you replaced the original plastic airbox by an elegant leather protection part and two air filters and a crankcase breather. The air filters and breather are available in polished, satin black and brushed version. Appart from the aesthetic aspect, this modification leads to a slight...

View

Headlight brackets for original headlight for Interceptor 650

Headlight brackets for original headlight for Interceptor 650 2

-30%

Interceptor / Continental GT 650

Headlight brackets for original headlight for Interceptor 650

€90.30 €129.00

Headlight fixation brackets for Royal Enfield 650 Interceptor and Continental GT 650. This pair of headlight brackets is mounted to replace the original ones. Compatible with bulb or LED headlights. Suitable if you keep the original key switch. If you opt for our flat fork crown with relocated key switch, you can fit our small 60mm headlight brackets....

View

Bouchon plat de réservoir pour triumph 2

-30%

Parts

Flat fuel tank cap for Triumph

€40.60 €58.00

Black finish only, without locking system. Made with a black anodized treatment for long-lasting durability and impeccable style. This product was carefully selected by the BAAK workshop team for its elegant look and superior quality. It is easily installed as a direct replacement for the original cap.

Relocated ignition switch control bracket kit for Triumph (pre- 2016)

-35%

Triumph

Relocated ignition switch control bracket kit for Triumph (pre- 2016)

€31.85 €49.00

Relocated ignition switch control bracket for Triumph (pre-2016 - air-cooled). This simple ignition switch support enables you to relocate the ignition control between the fuel tank and the left carburetor. Fits on the right side on the injection models (EFI). It requires to move the wiring harness that is in your headlight, under the gas tank, without...

Parts

Exhaust wrap

€93.60

Here are 15 meters (or 49') of exhaust wrap, 5 cm wide (1'' & 31/32), to wrap up your exhaust system and get the BAD BOY look you're aiming at! For the black color thermal wrap, we highly recommend you to paint it with an high temperature paint so the color can resist over the months. Available in Black or Beige color. This is high quality part,...

View

Leather dye, perfect for motorcycle seats

Leather dye, perfect for motorcycle seats 2

Parts

Leather dye cream

€24.00

This leather dye cream is a maintenance solution. It penetrates the leather and gives it a deep black tint. You can use it for your saddles but also for any other leather product: shoes, jackets, gloves, saddlebags, etc. Capacity: 200 ml. It's available for Black, Gold, Brown and Ruby (red) leather.Should be applied with a cloth, mixed with our...

View

Short exhaust for Royal Enfield 650 Interceptor / Continental GT

Interceptor / Continental GT 650

Short exhaust for Royal Enfield 650 Interceptor / Continental GT

€960.00

Short exhaust line for Royal Enfield 650 Interceptor / Continental GT (2018-...), designed and manufactured by our craftsmen in France. The manifolds are stainless steel, the mufflers are aluminium. It provides a stronger and deeper sound than the original exhaust, but remains discreet. Despite the huge care we brought to making it discreet, it's not...

View

Handlebar clamps for Royal Enfield 650 Interceptor / Continental GT

Handlebar clamps for Royal Enfield 650 Interceptor / Continental GT 2

-40%

Interceptor / Continental GT 650

Handlebar clamps for Royal Enfield 650 Interceptor / Continental GT

€57.60 €96.00

Machined aluminium handlebar clamps for Royal Enfield 650 Interceptor / Continental GT. These risers are available in ø22mm diameter, ø28,6mm diameter or 1 inch (ø25,4mm) diameter, it's lighter and elegant. The clamps are satin black powder coat painted, and come with all the stainless steel screwing kit compatible with your motorcycle. Designed and...

View

Parts

Leather covered handlebar grips

€145.00

Leather covered handlebars grips. Wrapped with a high quality leather, it gives a touch of chic to your motorcycle while keeping a good takeover. Available in aged brown, gold, black and ruby leather. Four thread stitchings colors available so it perfectly fits your bike. Available for ø25,4mm (1 inch) handlebars.

View

Triumph

Short exhaust for Triumph (2016-2024)

€1,200.00

Short Exhaust Line for Triumph T100 - T120 - Street Twin - Speed Twin 900 - Thruxton 1200 - Speed Twin 1200 (from 2016, liquid-cooled), designed and manufactured in our workshop. The headers are made of stainless steel, and the silencers are aluminum. This exhaust line delivers a deep, resonance-free sound that is not too loud. It is easy to install,...

View

Home

Air filter maintenance kit (France version)

€13.20

Washable Air Filter Maintenance Kit Take care of your air filter and extend its performance with this complete maintenance kit. It contains everything you need to clean and re-oil your filter at each service to ensure optimal airflow and consistently effective filtration. Not suitable for original-style air filters, which must be replaced.

Home

Trail engine guard - Triumph 1200 XE-XC

€160.00

Aluminum Trail Skid Plate for Triumph Scrambler 1200 XE-XC In addition to giving your Scrambler an adventurous look, this skid plate provides effective protection for the lower engine in all conditions. Made of 4 mm thick aluminum, it provides a real shield against splashes, stones, and impacts associated with aggressive off-road riding. Easy to install,...

View

Leather handlebar pad for motorcycle (black, brown, red, gold)

Parts

Leather handlebar pad

€75.00

Leather-covered handlebar pad. Appart from the protection brought by this pad in case of shock with your handlebar, his leather cover will bring a classic off road look to your motorcycle. Our craftsmen re-interpreted the codes of off road bar pads to give it an aesthetic use. The inner diameter for the crossbar is ø12mm, the external diameter of the pad...

View

Airbox removal kit for Triumph T120 (2016)

Airbox removal kit for Triumph T120 (2016) 2

-30%

Bonneville T120 (2016 -...)

Airbox removal kit for Triumph T120 (2016)

€196.00 €280.00

Airbox removal kit for Triumph Bonneville T120 (2016-...). This kit enables you to visually lighten the line of your motorcycle and make it breathe better. This kit includes: The aluminium battery box (Satin black only) A pair of "camembert" air filters A pair of aluminium side covers (Satin black or Brushed) with or without saddlebag(s) All the...

View

Aluminium intake cover for Triumph 900 (2016-...)

-30%

Triumph

Intake covers for Triumph 900 (2016)

€45.50 €65.00

Pair of aluminium intake covers for Triumph (2016-...). These covers come in place of the original ones to give a better aesthetic look to your motorcycle. It's suitable for Triumph Street Twin / Street Cup and Bonneville T100 (2016-...). It comes by pair. It's available in Satin black and Brushed finish. It comes with all the necessary mounting...

View

Leather seat for Royal Enfield 650 Interceptor / Continental GT

Interceptor / Continental GT 650

Leather seat for Royal Enfield 650 Interceptor / Continental GT

€540.00

Heritage leather seat for Royal Enfield 650 Interceptor / Continental GT. This seat is handcrafted by our craftsmen at the BAAK's workshop in France, based on a Royal Enfield seat more comfortable than the original one and so it remains compatible with your motorcycle. It has the same shape as your original seat, but covered with leather which will give...

View

Triumph

Short leather seat kit for Triumph (pre- 2016)

€1,290.00

Short leather seat kit for Triumph (before 2016 - air-cooled). This leather seat kit enables you shorten the rear end of the motocycle to reach a more compact look while keeping two seatings to bring a passenger. No welding required. It comes with assembly instructions. Comes with: Machined aluminium short subframe system Genuine short leather seat...

View

Parts

Tracker bar handlebars

€159.00

Tracker Bar handlebars, manufactured out of aluminium. This Tracker type handlebar has Ø28,6mm clamping diameter and Ø22mm controls diameter. It's 790mm wide. It offers much pullback to the rider which offers a comfortable riding position. It's available in satin black finish only.

View

Green Filter Replacement Air Filter for Royal Enfield 650 Interceptor / Continental GT

Home

Green Filter Replacement Air Filter for Royal Enfield 650 Interceptor / Continental GT

€69.36

Optimize your motorcycle's performance with this Green Filter sports air filter, designed with double-layer oiled cotton for superior airflow and optimal filtration. Simple maintenance with the Green Filter kit (optional). Easy installation: directly replaces the original filter.More power, more torque, less fuel consumption.Washable and reusable for...

Short seat kit rear loop for Royal Enfield 650

Short seat kit rear loop for Royal Enfield 650 2

-15%

Interceptor / Continental GT 650

Short seat kit rear loop for Royal Enfield 650

€168.30 €198.00

This rear loop is designed to shorten the back of your motorcycle, offering a sleek, minimalist style and a more compact overall silhouette. Made with a high-quality glossy black epoxy coating, it perfectly matches the frame’s color for discreet and seamless integration.

Home

BAAK Leather Sample

€12.00

This is the essential tool to help you choose the right color and feel the quality of the leather at your fingertips. Order it online, and the cost will be refunded with the purchase of a leather item from the BAAK range.* *Excludes glasses cases, keychains, pot covers, boot protectors, and discounted or sale items.

-35%

Scrambler 1200 x/xc/xe

Side covers (for original high exhaust system) Triumph Scrambler 1200 X/XC/XE

€128.70 €198.00

Enhance your Triumph Scrambler 1200 X/XC/XE with these aluminum side covers designed for the original high exhaust line. They not only improve heat protection but also add a dynamic look to your bike. These covers allow you to replace the original plastic parts with a more robust and aesthetically pleasing solution. Easy to install, they fit directly in...

View

-15%

Universal

Universal handlebars controls kit

€168.30 €198.00

This Universal handlebars controls kit is essential to clear your cockpit. Each part of the kit must be purchased separately : Brake master cylinder Throttle Clutch lever This kit designed by our craftsmen shows a perfect finish level thanks to his assembly quality and satin black powder coat painting. These parts are available for classic and vintage...

View

Triumph

Short Full Black exhaust Triumph (2016-...)

€1,680.00

Short Full Black Exhaust Line for Triumph T100 - T120 - Street Twin - Speed Twin 900 - Thruxton 1200 - Speed Twin 1200 (2016 to 2024 - liquid-cooled), featuring a matte black ceramic coating, designed and manufactured in our workshop. The headers are made of stainless steel, and the silencers are aluminum. This exhaust line delivers a deep,...

View

Triumph

Heritage leather seat for Triumph (2016)

€836.40

Classic leather seat for Triumph T120 and T100 (2016-... - liquid-cooled). This seat is narrower (-2,5cm) than your original seat, the shape of its leather cover will give it a more thin and compact look, and highly improve the finish level of your Triumph. It has a 6cm foam height that provides a good riding comfort. This seat is manufactured by our...

View

Parts

Biltwell Thruster handlebars grips

€22.00

Biltwell Thruster handlebar grips, manufactured by Biltwell for character motorcycle. It offers a better handtaking of your handlebar, a great riding comfort and an incredible look. Handlebar diameter 1" (ø25,4mm) or ø22mm. Comes in pairs. Available in Black and Brown color.

View

Triumph

Monza gas cap for Triumph

€150.00

Monza gas cap for Triumph Modern Classics. The timeless design of this Monza cap will perfectly suit your gas tank thanks to our adapter. Only suitable for Triumph Modern Classics: Air cooled (2000-2016) and new Liquid Cooled (since 2016). The full kit is composed by the polished aluminium gas cap, a seal, the necessary mounting hardware and the adapter....

Home

Green Filter Replacement Air Filter for Triumph (2016–...)

€61.98

Classic leather seat for Moto Guzzi V7 850

Parts

Classic leather seat for Moto Guzzi V7 850

€859.20

This seat is handcrafted by our leather artisans at the BAAK workshop in France, using a Moto Guzzi seat pan for perfect compatibility with your bike. It offers a café racer look and good seating comfort. Available in Old Brown, Gold, Black and Chocolat leather. Choose a leather cover with a classic, lightning, or diamond-stitched top depending on your...

View

BAAK | Land Rover Defender Radiator Grill

BAAK | Land Rover Defender Radiator Grill 2

-20%

Parts

Land Rover Defender Radiator Grill

€199.20 €249.00

Without a doubt THE statement piece of our new line of parts for Land Rover Defender. Both the design and R&D departments imagined this line so Defender’s owner can personalized their beloved vehicle to their tastes. This grille gives to your Defender a unique personality: both raw and classic at the same time. The smooth and long lines come from a...

View

Classic headlight with large integrated Daytona speedometer for Royal Enfield 650 Interceptor / Continental GT

Parts

Classic headlight with large integrated Daytona speedometer for Royal Enfield 650...

€599.00

Daytona W speedometer for Royal Enfield 650 Interceptor / Continental GT (2018–...) This plug & play integrated headlight with speedometer solution is ideal for streamlining the cockpit of your Royal Enfield while retaining the functionality of your original speedometer. The speedometer is delivered pre-wired. It features a speedometer, a needle...

View

Mini speedometer for Royal Enfield 650 Interceptor and Continental GT

Mini speedometer for Royal Enfield 650 Interceptor and Continental GT 2

-15%

Interceptor / Continental GT 650

Motogadget Tiny Speedometer for Royal Enfield 650 Interceptor / Continental GT

€380.80 €448.00

Tiny Speedometer for Royal Enfield 650 Interceptor / Continental GT (2018–...). This plug & play speedometer solution is ideal for streamlining the cockpit of your Royal Enfield while keeping all the functionalities of your original speedometer. The speedometer comes pre-wired, with its harness and satin black aluminum mounting bracket. Your...

View

Universal aluminium silencer for motorcycle

Parts

Universal aluminium silencer for motorcycle

€294.00

Universal exhaust muffler / silencer manufactured out of aluminium. This silencer fits any engine size motorcycle and offers a flawless finish, perfect to improve the look and sound of your build. It includes a M8 insert for the fixation, and a spring on the other side. Available in two different length and for manifolds in diameter Ø38mm, Ø40mm and...

View

Moto Guzzi

Leather seat for Moto Guzzi V9

€988.80

Leather seat for Moto Guzzi V9 Bobber and Roamer. This seat is handcrafted by our craftsmen at the BAAK's workshop in France, based on an original Moto Guzzi seat pan so it perfectly fits your motorcycle. It's narrower than the original one, the shape of the leather cover makes it look very thin while keeping a good seating comfort. It's available in...

View

Tiny Motogadget speedo fixation bracket for Triumph (pre- 2016)

-30%

Triumph

Tiny Motogadget speedo fixation bracket for Triumph (pre- 2016)

€34.30 €49.00

Tiny Motogadget speedometer fixation bracket for Triumph (pre-2016). It's a machined aluminium bracket, satin black powder coated. This part comes with all the necessary screwing.

View

Triumph

Classic Headlight / Integrated Speedometer for Triumph (pre-2016)

€840.00

Classic headlight with integrated speedometer for Triumph (before 2016 – air-cooled) This needle speedometer, integrated into a Ø180mm satin black metal headlight with M8 side mounts, is the ideal way to visually lighten the front of your bike while retaining advanced speedometer functionalities. This speedometer is offered in a plug & play version,...

View

Heating grips removal kit for Triumph Bonneville T120 (2016-...)

-15%

Triumph

Heating grips removal kit for Triumph T120 (2016)

€45.90 €54.00

Heating grips removal kit for Triumph Bonneville T120 (2016-...). This grips kit enables you assemble any handlebar on your T120 without having to cut notches in it to put the heated grips system back on. The grips are high quality Biltwell Thruster or Renegade ones (25,4mm diameter) which offer more comfort. Comes in pairs.

View

-20%

Moto Guzzi

Medium front mudguard for Moto Guzzi V7

€132.00 €165.00

Medium front mudguard for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9, manufactured out of stainless steel. It's short but it's still long enough to protect you from the front wheel splashes. It's pre-drilled so it fits the original fixation system of your motorcycle. It's designed and manufactured by our team at the workshop in France. It's available...

View

-30%
New

Home

Universal aluminum number plaque

€20.30 €29.00

Universal aluminum number. Dimensions Width 315 mm Height 210 mm. screws not supplied.

Bates Headlight with Integrated Speedometer for Royal Enfield 650 | BAAK

Bates Headlight with Integrated Speedometer for Royal Enfield 650 | BAAK 2

-15%

Parts

Bates Headlight / Integrated Speedometer for Royal Enfield 650

€589.90 €694.00

Bates Headlight with Integrated Motogadget Tiny Speedometer for Royal Enfield 650 Interceptor / Continental GT (2018–...). Built into a ø150mm Bates headlight shell, this integrated speedometer headlight is a Plug & Play solution to streamline the cockpit of your Interceptor or Continental GT while retaining all the functionalities of your original...

View

Quad Lock Pro Aluminium Motorcycle Phone Holder - Handlebar mount - BAAK

Quad Lock Pro Aluminium Motorcycle Phone Holder - Handlebar mount - BAAK 2

-15%

Parts

Quad Lock Pro Aluminium Motorcycle Phone Holder Handlebar mount

€59.50 €70.00

Give your bike the best smartphone mount with the Quad Lock Pro Aluminium. Carefully selected by the BAAK Atelier team for its sleek design, this mount represents the top-of-the-range version of the Quad Lock brand (Pro version). Manufacturer reference : QLM-HBR-PRO

Removable windshield for Triumph Bonneville T100 / T120

Removable windshield for Triumph Bonneville T100 / T120 2

-15%

Parts

Removable windshield for Triumph Bonneville T100 / T120

€693.60 €816.00

Equip your Triumph Bonneville T100/T120 with this retro-touring removable windscreen kit. 2 sec to remove without tools.It includes a removable windshield and its mountings, as well as headlight brackets adapted to the original model. This windshield is compatible with the original headlight or any other ø180mm headlight. Not compatible with Triumph...

View

Heritage leather seat for Moto Guzzi V7 850

Parts

Heritage leather seat for Moto Guzzi V7 850

€859.20

This seat is handmade by our leather artisans at the BAAK workshop in France, using a Moto Guzzi seat pan to ensure perfect compatibility with your bike. It offers a café racer look and good seating comfort. Available in Old Brown, Gold, Black and Chocolat leather. Choose a leather cover with classic, lightning, or diamond-stitched patterns, depending on...

View

-20%

Parts

Land Rover Defender Fender vents

€88.00 €110.00

The devil is in the details and this exactly why we’ve decide to add these beautiful metal fender vents to our new line of parts for Land Rover Defender. These are beautiful upgrades over the factory plastic vents. Both the Design and R&D departments worked jointly on this line of parts so Defender’s owner can personalized their beloved vehicle to...

View

Replacement air filters for Triumph Bobber 1200 Airbox removal kit

Replacement air filters for Triumph Bobber 1200 Airbox removal kit 2

-30%

Bonneville Bobber (2017 -...)

Spare air filters for Triumph Bobber 1200 airbox removal kit

€48.30 €69.00

This pack of spare air filters is suitable for our Airbox removal kit for Triumph Bobber 1200 (2017-...). It's composed of two air filters available in Brushed, polished and satin black. The air filters replacement routine on your motorcycle depends on how you use it along the year.

View

Short leather seat kit for Royal Enfield 650 Interceptor / Continental GT

Short leather seat kit for Royal Enfield 650 Interceptor / Continental GT 2

Interceptor / Continental GT 650

Classic short leather seat kit for Royal Enfield 650 Interceptor / Continental GT

€840.00

Short leather seat kit for Royal Enfield 650 Interceptor / Continental GT (2018-...). This kit shortens the original seat length by 12cm to get a more compact look and the elegance of a leather seat, while keeping two seaters space. It includes: Screwed subframe (no welding required) with cutting template Genuine leather short seat Stainless steel rear...

View

Bates headlight plate with leather collars for Royal Enfield Interceptor / Continental GT 650

-30%

Interceptor / Continental GT 650

Bates headlight plate for Royal Enfield 650 Interceptor / Continental GT

€115.50 €165.00

Bates headlight plate for Royal Enfield 650 Interceptor / Continental GT (2018-...). Attention, this part is only compatible with our Flat triple trees kit, it requires to move the ignition switch under the gas tank. Manufactured out of aluminium, this plate comes to hide the steering column and cables left visible after the assembly of a Bates...

View

Triumph

Bates headlight / integrated speedometer for Triumph (2016-...)

€1,350.00

Bates headlight / integrated speedometer for Triumph (2016-... / Liquid cooling) Integrated into the housing of a ø150mm Bates headlight, this motogadget Tiny Plug & Play speedometer is a simple solution to streamline the cockpit of your Triumph while retaining the information from your original speedometer. The assembly is delivered pre-wired, with...

View

Mini speedometer Triumph Street Twin / Scrambler / Bonneville T120 / T100

-15%

Triumph

Motogadget Tiny Speedometer for Triumph (2016–...)

€1,045.50 €1,230.00

Mini Speedometer for Triumph (2016–... / Liquid-cooled) This Plug & Play mini speedometer is THE solution to clean up your Triumph cockpit while retaining all original speedometer information.It comes with mounting plates for installation on one of the fork tubes or under the top triple clamp (if you have a BAAK triple clamp). The dial is available in...

View

-15%

BMW

Air filters kit for BMW NineT

€236.64 €278.40

Air filters kit for BMW NineT. This kit includes two black air filters and a red oil breather. The air filters plug directly on the intake, in place of the original air intake pipes of your BMW NineT. No power or torque improvement with this kit, it's simply an aesthetic modification. We recommend you to go for our Aluminium battery box along with this...

Extension for Classic ø10 round motorcycle mirror in aluminium

Extension for Classic ø10 round motorcycle mirror in aluminium 2

-15%

Parts

Extension for Classic ø10 round motorcycle mirror in aluminium

€18.70 €22.00

Shaft extension for Classic round mirror. This extension is suitable only for our Classic round mirror. This part enables you make the mirror shaft longer for a better rear view, and makes it easier to adjust. This extension is 55mm long (35mm between holes). Supplied per unit.

Parts

Heritage leather seat for BMW R NineT

€945.60

Heritage leather seat for BMW R 1200 NineT. This seat is handcrafted at BAAK's workshop, based on an original BMW seat pan ensuring the compatibility with your NineT. It's a two-seater model. Available in Aged brown, Gold, Black genuine leather. The suede leather applied on the front provide a very elegant contrast. Choose a classic, squares or diamonds...

View

Moto Guzzi

Classic leather seat for Moto Guzzi V7

€720.00

Classic leather seat for Moto Guzzi V7I, V7II et V7III. This seat is manufactured by our craftsmen at the workshop in France, based on a Moto Guzzi seat pan so it perfectly fits your motorcycle. It's narrower than the original one and offers a refined look while keeping a perfect seating comfort. It's available in Aged brown, Black, Gold leather color....

View

Triumph

Bates headlight / integrated speedometer for Triumph (pre-2016)

€650.00

Bates headlight with integrated motogadget Tiny speedometer for Triumph (pre-2016 – air-cooled) Integrated into the housing of a ø150mm Bates headlight, this headlight with integrated speedometer is a Plug & Play solution to streamline your cockpit while keeping the functions of your original speedometer. This speedometer comes in a plug & play...

View

Gallinella Rear Section for Royal Enfield 650 Interceptor / Continental GT (without seat)

-40%

Royal Enfield

Gallinella Rear Section for Royal Enfield 650 Interceptor / Continental GT (without seat)

€414.00 €690.00

Make this Gallinella Tail Kit for Royal Enfield 650 Interceptor / Continental GT the centerpiece of your customization project, and transform your Royal Enfield into a timeless machine that stands out from the crowd. This kit includes: Bolt-on rear loop and cutting template Gallinella resin tail section Not compatible with the original seat

Removable windshield Moto Guzzi V7 III, V7 850, V9 | Retro and protection

Removable windshield Moto Guzzi V7 III, V7 850, V9 | Retro and protection 2

-15%

Parts

Removable windshield for Moto Guzzi V7 III / V7 850 / V9

€693.60 €816.00

Give your Moto Guzzi V7 III, V7 850 or V9 a retro-touring touch with this removable windscreen. 2 sec to remove without tools. Supplied complete with fastenings and matching headlight brackets, it's available in gloss black or leather (black or brown). Please note that the original headlamp is not suitable, so you'll need a ø180mm classic headlamp and a...

View

Daytona Triumph counter, Café Racer prep, Made in France

Daytona Triumph counter, Café Racer prep, Made in France 2

Parts

Mini Daytona speedometer for Triumph (2016–...)

€966.00

Mini Daytona speedometer for Triumph (2016–... / Liquid-cooled) The 60mm Daytona mini speedometer mounts on the original handlebar clamps of modern Triumphs (2016–...): T120, T100, Speed Twin 900, Scrambler 900 This is a 100% plug & play accessory. It includes a bracket, necessary screws, and a multiplexing unit. Pre-wired in our workshop, it installs...

View

Gallinella rear fairing rear for Royal Enfield 650 Interceptor / Continental GT

-30%

Royal Enfield

Gallinella fairing kit for Royal Enfield 650 Interceptor / Continental GT

€874.99 €1,249.99

Gallinella rear fairing kit for Royal Enfield 650 Interceptor / Continental GT (2018-...). Turn this kit into the masterpiece of your custom project and make your Royal Enfield stand out from the mass. This kit includes: Screwed short subframe with cutting template Short leather seat Gallinella fiber fairing License plate holder, taillight (trim ring...

View

Exhaust silencers for Royal Enfield 650 Interceptor / Continental GT

Interceptor / Continental GT 650

Exhaust silencers for Royal Enfield 650 Interceptor / Continental GT

€660.00

Short exhaust silencers for Royal Enfield 650 Interceptor / Continental GT (2018-...). This pair of aluminium mufflers offers a strong and deep sound to your motorcycle, without being noisy. It's composed of multiple baffles that won't damaged the engine performances. At the entrance of the muffler are two high-temperature O-ring seals so there is no...

View

Black adjustable shock absorber for BMW R 1200 NineT by BAAK

Black adjustable shock absorber for BMW R 1200 NineT by BAAK 2

Parts

Shock absorber for BMW NineT

€490.20

Big Body shock absorber for BMW R 1200 NineT 1200 (2017-...). This mono shock absorber is manufactured in France by our partner Shock Factory. It offers a finish level and look that can't be compared to the original one. It's easy to adjust thanks to one only synchronized knob which adjust both compression and relaxation (48 different levels of setting)...

Triumph

Classic Headlight / Integrated Speedometer for Triumph (2016–...)

€1,500.00

Classic Headlight / Integrated Speedometer for Triumph (2016–... – Liquid-cooled) Integrated into the housing of a ø180mm Classic headlight with M8 side mounts, this Plug & Play speedometer is a simple solution to streamline the cockpit of your Triumph while keeping the original information display and ensuring optimal readability. The speedometer...

View

Headlight plate for Bates Headlight for Triumph (2016-...)

-30%

Triumph

Bates headlight plate for Triumph (2016)

€118.30 €169.00

Bates headlight plate for Triumph (since 2016 - liquid-cooled). This aluminium plate comes to hide the steering column and cables running around after you mounted a Bates headlight (with lower fixation) on your Triumph. The 4 leather collars (brown, black, gold or ruby color) attach the plate to your fork tubes. Available in Satin black or Brushed...

View

Speedometer lowering kit for BMW NineT 2

-40%

BMW

Speedometer lowering kit for BMW NineT

€13.20 €22.00

Lowering kit for BMW NineT speedometer. These 4 struts enable you lower your original NineT speedometer by 10mm, to get a clear riding post. Suitable for BMW NineT Pure, Scrambler, Racer and Urban GS.

Leather seat for Triumph Bobber 1200 (2017-...)

Bonneville Bobber (2017 -...)

Leather seat for Triumph Bobber

€600.00

Leather seat for Triumph Bonneville Bobber 1200 (2017-...). This seat has the same shape as your original one, and a perfect finish level thanks to the great quality leather we selected and its diamonds-shape quilting on the seating area. This seat is manufactured by our craftsmen at BAAK's workshop in France. It's available in Aged brown, Black, Gold...

View

Exhaust silencers for Triumph Bobber (2017)

Bonneville Bobber (2017 -...)

Exhaust silencers for Triumph Bobber (2017)

€765.00

Short exhaust silencers for Triumph Bobber 1200 (2017-...), designed and manufactured at our workshop in France. The stainless steel adapters connect to your catalytic converter (or X-Pipe). The mufflers are manufactured out of aluminium, and available in Brushed or Mat Black finish. This pair of silencers provides a rough and deep sound, without...

View

Rectifier bracket for Triumph (pre- 2016)

-35%

Triumph

Rectifier bracket for Triumph (pre- 2016)

€19.50 €30.00

Rectifier relocation bracket for Triumph (pre-2016 - air-cooled). This bracket enables you to relocate the voltage rectifier, in place of the horn. Then the horn can be attached below, on the same bracket. It's manufactured out of aluminum laser cut. You may be obliged to move the original wiring harness under the gas tank. All the necessary screwing...

Leather seat for Royal Enfield Classic 500

Bullet / Classic (2008- ..)

Leather seat for Royal Enfield Classic 500

€531.60

Leather seat for Royal Enfield Classic 500. It keeps the comfort and shape of your original seat, with an additional touch of chic leather. This seat is handcrafted by our craftsmen at our workshop in France, based on an original Royal Enfield seat pan so it remains perfectly compatible with your motorcycle. It's available in aged brown, gold, and...

View

Racer leather seat for Triumph Thruxton 1200

Thruxton 1200 (2016 -...)

Racer leather seat for Triumph Thruxton 1200

€695.00

Racer leather seat for Triumph Thruxton 1200 (2016-...). This seat has the same shape as the optional Triumph single-seater one, with the elegance of a leather cover it will highly improve the finish level of your Triumph. The riding comfort will be the same as with your original seat, it's perfect to turn your ride into a pure cafe racer. This seat is...

View

Parts

Flat leather seat for Triumph (2016)

€841.20

Flat cafe racer leather saddle for Triumph T100 / T120. Narrower (-2,5cm) than your original seat, with a touch a suede leather on the front, it will give your Triumph an elegant look and considerably improve its finish level. It has a 6cm foam height that provides a good riding comfort. This seat is manufactured by our craftsmen at BAAK's workshop in...

View

Parts

Classic leather seat for BMW R NineT

€1,074.00

Classic leather seat for BMW R 1200 NineT. This seat is handcrafted at BAAK's workshop, based on an original BMW seat pan ensuring the compatibility with your NineT. It's a two-seater model. Available in Aged brown, Gold, Black genuine leather, it offers a chic touch to your motorcycle. Choose a classic, squares or diamonds quilting style on the top...

View

Classic Headlight / Integrated Universal Speedometer

Parts

Classic Headlight / Integrated Universal Speedometer

€678.00

Classic Headlight with Integrated Universal Speedometer. The satin black metal headlight shell Ø180mm features M8 side mounts. Available with Black, Brushed, or Chrome bezel. The speedometer is manufactured by Acewell. It can be easily programmed according to your wheel diameter. Installing the speedometer requires motorcycle electronics knowledge. The...

View

Universal

Bates Headlight / Integrated Universal Speedometer

€450.00

This universal Bates headlight with integrated motogadget Tiny speedometer allows you to streamline your cockpit while keeping all the original functionalities of a speedometer. The mini analog speedometer displays total and daily mileage, turn signal indicator, oil pressure, high beam, and neutral light. The speedometer control button is discreetly...

View

Classic Mini front mudguard for BMW NineT

Classic Mini front mudguard for BMW NineT 2

-20%

BMW

Classic Mini front mudguard for BMW NineT

€228.00 €285.00

Classic Mini front mudguard for BMW R 1200 NineT, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled, comes with its satin black powder coated fixation bracket suitable for the selected model and the stainless steel screws required. It's designed and manufactured by our team at the...

View

Parts

Left 3-buttons universal switch

€300.00

Universal handlebar controls, including :- an ON/OFF/ON turn signal switch- a push button for the horn- a push button for full headlights (may require adaptation of a relay) Available for 22mm (7/8") or 25,4mm (1") diameter handlebar. This part has a satin black powder coating, and is designed to be riveted to your handlebar.

View

Stainless steel collars for exhaust wrap

Parts

Stainless steel collars for exhaust wrap

€24.00

This batch of 8 self-fruits in stainless steel will allow you to correctly attach the thermal strip to your exhaust. Don't tell us that you just go to do this with twisted thread. delivered by 8 units.

Triumph

Motogadget M-Tri for Triumph (pre- 2016)

€199.50

Multiplexing M-Tri box manufactured by Motogadget for Triumph Bonneville, Scrambler and Thruxton EFI since 2011 (equipped with digital speedometer). Essential to remove your original speedometer, because without it the motorcycle will not start. This M-tri enables you keep all all the original features of your speedometer, in order to fit any kind of...

View