Best sellers

Showing 73-96 of 139 item(s)

Medium front mudguard for Moto Guzzi V7

Medium front mudguard for Moto Guzzi V7 2

-20%

Moto Guzzi

Medium front mudguard for Moto Guzzi V7

€132.00 €165.00

Medium front mudguard for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9, manufactured out of stainless steel. It's short but it's still long enough to protect you from the front wheel splashes. It's pre-drilled so it fits the original fixation system of your motorcycle. It's designed and manufactured by our team at the workshop in France. It's available...

Rear Footpeg Mounting Plate for Royal Enfield 650

-30%

Royal Enfield

Rear Footpeg Mounting Plate for Royal Enfield 650

€84.00 €120.00

Designed to move the passenger foot pegs forward and down, making room for the installation of large saddlebags while increasing passenger comfort without interfering with the rider. This is a sturdy stainless steel plate with a satin black epoxy coating.

Bates Headlight with Integrated Speedometer for Royal Enfield 650 | BAAK

Bates Headlight with Integrated Speedometer for Royal Enfield 650 | BAAK 2

-15%

Parts

Bates Headlight / Integrated Speedometer for Royal Enfield 650

€589.90 €694.00

Bates Headlight with Integrated Motogadget Tiny Speedometer for Royal Enfield 650 Interceptor / Continental GT (2018–...). Built into a ø150mm Bates headlight shell, this integrated speedometer headlight is a Plug & Play solution to streamline the cockpit of your Interceptor or Continental GT while retaining all the functionalities of your original...

Rear Fender Eliminator Kit Triumph 2016-...

Rear Fender Eliminator Kit Triumph 2016-... 2

Parts

Rear Fender Eliminator Kit Triumph 2016-...

Looking to streamline the rear of your Triumph Bonneville T100/T120, ST900, or Scrambler 900? This fender eliminator kit with a license plate holder allows you to completely remove the original rear fender. Made from aluminum and stainless steel, the kit comes with a homologated LED taillight and license plate illumination. A plug-and-play adapter...

Headlight brackets for original headlights V7 III / V7 850 / V9

Headlight brackets for original headlights V7 III / V7 850 / V9 2

-35%

Parts

Headlight brackets for original headlights Moto Guzzi V7 III / V7 850 / V9

€83.85 €129.00

Enhance the look of your Moto Guzzi V7 III, V7 850 or V9 with these machined aluminum headlight clamps, compatible with original LED and bulb headlights. With a length of 60 mm and 39-40 mm mounting clamps, they also allow the installation of adaptable turn signals. Finished in satin-black epoxy, they are supplied in pairs with stainless steel screws...

Replacement air filters for Triumph Bobber 1200 Airbox removal kit

Replacement air filters for Triumph Bobber 1200 Airbox removal kit 2

-30%

Bonneville Bobber (2017 -...)

Spare air filters for Triumph Bobber 1200 airbox removal kit

€48.30 €69.00

This pack of spare air filters is suitable for our Airbox removal kit for Triumph Bobber 1200 (2017-...). It's composed of two air filters available in Brushed, polished and satin black. The air filters replacement routine on your motorcycle depends on how you use it along the year.

Bates headlight plate with leather collars for Royal Enfield Interceptor / Continental GT 650

Bates headlight plate with leather collars for Royal Enfield Interceptor / Continental GT 650 2

-30%

Interceptor / Continental GT 650

Bates headlight plate for Royal Enfield 650 Interceptor / Continental GT

€115.50 €165.00

Bates headlight plate for Royal Enfield 650 Interceptor / Continental GT (2018-...). Attention, this part is only compatible with our Flat triple trees kit, it requires to move the ignition switch under the gas tank. Manufactured out of aluminium, this plate comes to hide the steering column and cables left visible after the assembly of a Bates...

Bates headlight / integrated speedometer for Triumph (2016-...) by BAAK

Bates headlight / integrated speedometer for Triumph (2016-...) by BAAK 2

Triumph

Bates headlight / integrated speedometer for Triumph (2016-...)

Bates headlight / integrated speedometer for Triumph (2016-... / Liquid cooling) Integrated into the housing of a ø150mm Bates headlight, this motogadget Tiny Plug & Play speedometer is a simple solution to streamline the cockpit of your Triumph while retaining the information from your original speedometer. The assembly is delivered pre-wired, with...

License plate holder for original Moto Guzzi V9 fender

License plate holder for original Moto Guzzi V9 fender 2

-30%

V9 (2016 -...)

License plate holder for original Moto Guzzi V9 fender

€117.60 €168.00

License plate holder for original rear fender of Moto Guzzi V9. This bracket, painted in satin black epoxy, mounts directly in place of the original unit. It consists of a license plate holder, a round LED tail light (EU approved) with license plate illumination, a pair of indicator brackets of your choice, and a plug & play wiring harness.

Rear turn indicators brackets for Triumph

Rear turn indicators brackets for Triumph 2

-35%

Triumph

Rear turn indicators brackets for Triumph

€19.50 €30.00

Rear turn signals bracket for Triumph. Enables you to mount your turn signals on the upper shock absorber axles for a more discreet look. Compatible with the original passenger grab handle. Make sure to select the right model of motorcycle so you can receive brackets suitable for your motorcycle. Comes in pairs. Length: 50mm.

Wide fork triple trees kit for Triumph T100-T120 (2016)

Wide fork triple trees kit for Triumph T100-T120 (2016) 2

Triumph

Wide fork triple trees kit for Triumph T100-T120 (2016)

Wide fork triple yokes kit for Triumph Bonneville T100 / T120 (2016-... - liquid-cooled), it enables you mount a wide front tire (3.50). The kit includes the upper and lower triple trees 20mm wider, the lower bearing, the brake discs struts, the handlebar clamps and the wheel axle. Enable to lower the front end by 25mm. This kit is used on our Triumph...

Mini front mudguard for Moto Guzzi

Mini front mudguard for Moto Guzzi 2

-20%

Moto Guzzi

Mini front mudguard for Moto Guzzi

€132.00 €165.00

Mini front mudguard for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9, manufactured out of stainless steel. This front fender is very short, it enables you visually lighten the front of your motorcycle. It's pre-drilled so it fits the original fixation system of your motorcycle. It's designed and manufactured by our team at the workshop in France. It's...

Universal Mini front mudguard

Universal Mini front mudguard 2

-20%

Parts

Universal Mini front mudguard

€91.20 €114.00

Universal Mini front mudguard, manufactured out of stainless steel. This front fender is very short, it enables you visually lighten the front of your motorcycle. It's not pre-drilled so you can fit it on any model of motorcycle. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black,...

Headlight struts

Headlight struts 2

-40%

Parts

Headlight struts

€13.20 €22.00

Motorcycle headlight struts, manufactured out of aluminum, to perfectly adjust the position of your headlight. The hole diameter is ø8mm, the exterior diameter is ø29mm. For Moto Guzzi V7 Classic or Heritage headlight, choose the 10mm ones. For Triumph and Royal Enfield Classic or Heritage headlight, choose the 5mm ones. Comes in pairs.

Green Filter Replacement Air Filter for Triumph (2016–...)

New

Home

Green Filter Replacement Air Filter for Triumph (2016–...)

Optimize your motorcycle's performance with this Green Filter sports air filter, designed with double-layer oiled cotton for superior airflow and optimal filtration. Simple maintenance with the Green Filter kit (optional). Easy installation: directly replaces the original filter.More power, more torque, less fuel consumption.Washable and reusable for...

Headlight grille for BMW R12

Headlight grille for BMW R12 2

New

Home

Headlight grille for BMW R12

Protect your BMW R12's headlight in style with this Classic protective grille, crafted from stainless steel for optimal durability. Its satin black epoxy coating gives it a sleek and elegant look, perfectly in keeping with the R12's retro aesthetic. Made in France, manufactured in our workshop.

Gallinella Rear Section for Royal Enfield 650 Interceptor / Continental GT (without seat)

Gallinella Rear Section for Royal Enfield 650 Interceptor / Continental GT (without seat) 2

-40%

Royal Enfield

Gallinella Rear Section for Royal Enfield 650 Interceptor / Continental GT (without seat)

€414.00 €690.00

Make this Gallinella Tail Kit for Royal Enfield 650 Interceptor / Continental GT the centerpiece of your customization project, and transform your Royal Enfield into a timeless machine that stands out from the crowd. This kit includes: Bolt-on rear loop and cutting template Gallinella resin tail section Not compatible with the original seat

Moto Guzzi V7 850 turn signal harness - Easy mounting | BAAK

Moto Guzzi V7 850 turn signal harness - Easy mounting | BAAK 2

-15%

Parts

Turn signal harness MOTO GUZZI V7 850

€28.05 €33.00

Need to fit aftermarket indicators to your Moto Guzzi? This plug & play harness is for you! Compatible with your motorcycle's original terminals, it adapts easily to turn signals. With Japanese terminals from ø3.2 mm to 3.7 mm. The practical solution for customizing your bike. Sold in pairsMade in France

Universal classic-vintage motorcycle rear mudguard

Universal classic-vintage motorcycle rear mudguard 2

-15%

Parts

Universal classic-vintage motorcycle rear mudguard

€102.00 €120.00

An essential accessory for retro motorcycle enthusiasts. Made from stainless steel, this fender is designed to give your motorcycle an authentic and elegant look. With its classic design and neat finish, it will add a unique touch of style to your café-racer, scrambler, or other motorcycle. This fender is specially designed to fit classic and vintage...

Front-turn-indicators-bracket-Triumph-Bobber-1200

Front-turn-indicators-bracket-Triumph-Bobber-1200 2

-35%

Parts

Front turn indicators bracket for Triumph Bobber 1200

€16.25 €25.00

Turn signals brackets kit to relocate the indicators Triumph Bobber 1200 to visually lighten your motorcycle. The bracket comes on your oil-cooler.

Long shock absorbers for Royal Enfield 650 Interceptor

Long shock absorbers for Royal Enfield 650 Interceptor 2

Interceptor / Continental GT 650

2Win TRAIL shock absorbers for Royal Enfield 650 Interceptor

2Win Trail aluminium shock absorbers for Royal Enfield 650 Interceptor / Continental GT (2018-...). These shocks are adjustable in spring preload and hydraulic. Each click of the knob changes the setting of hydraulic compression and relaxation at the same time, it's very easy to use even while riding. It's 20mm longer than your original shock absorbers...

License plate holder for US format side license plates

License plate holder for US format side license plates 2

-35%

Parts

License plate holder for US format side license plates

€29.25 €45.00

This license plate holder is suitable for US size license plates (vertical) mounted in side position. It's manufactured out of 3mm thick aluminium and it's satin black powder coat painted. This part is only suitable for BAAK side license plate holders.

Handlebar controls kit by BAAK

Handlebar controls kit by BAAK 2

-15%

Universal

Universal handlebars controls kit

€168.30 €198.00

This Universal handlebars controls kit is essential to clear your cockpit. Each part of the kit must be purchased separately : Brake master cylinder Throttle Clutch lever This kit designed by our craftsmen shows a perfect finish level thanks to his assembly quality and satin black powder coat painting. These parts are available for classic and vintage...

Black front mudguard holder for Royal Enfield 650 Interceptor / Continental GT

Black front mudguard holder for Royal Enfield 650 Interceptor / Continental GT 2

-15%

Interceptor / Continental GT 650

Black front mudguard holder for Royal Enfield 650 Interceptor / Continental GT

€40.80 €48.00

Black front mudguard holder for Royal Enfield 650 Interceptor et Continental GT (2018-...). This black front fender bracket comes in place of the original grey color front fender holder of your Royal Enfield. This is the perfect accessory if, just like us, you pay attention to all the finish details of your machine. Suitable for both original mudguard...

1
…
3
4
5
6