Monza type tank cap for motorcycle guzzi v7iii / v9

Monza type tank cap for motorcycle guzzi v7iii / v9

Monza type tank cap for motorcycle guzzi v7iii / v9

Monza type tank cap for motorcycle guzzi v7iii / v9

Monza type tank cap for motorcycle guzzi v7iii / v9

Monza type tank cap for motorcycle guzzi v7iii / v9

Monza type tank cap for motorcycle guzzi v7iii / v9

Monza type tank cap for motorcycle guzzi v7iii / v9

Monza type tank cap for motorcycle guzzi v7iii / v9

Monza type tank cap for motorcycle guzzi v7iii / v9

Monza gas cap for Moto Guzzi V7III / V9

Monza gas cap for Moto Guzzi V7 III and V9. The timeless design of this Monza cap will perfectly suit your gas tank thanks to our adapter. The full kit is composed by the polished aluminium gas cap, a seal, the necessary mounting hardware and the adapter. It doesn't have any lock system and simply opens by pushing on the opening button. It is only suitable for Moto Guzzi V7 III and V9.

Beware of poor quality copies of this gas cap that will not last over the years.

€150.00

Tax included In stock

Description
Product Details

Brand: Moto GUZZI
Univers: Motocyclette
Catégorie: Accessoires
Type of part: Body and suspension
Engine
Modèles: V7 III (2017-…)
V9 (2016-…)
Products: Phare & Clignotants

Customers who bought this product also bought:

Short fork spring blocks

Short fork spring blocks 2

Parts

Short fork spring blocks

Short fork spring blocks. To proportionally lower the front en of your Triumph or Moto Guzzi V7 when you fit our short shock absorbers, you will need these fork springs blocks. It's 2cm (25/32'') shorter and comes right in place of the original ones.

Mini front mudguard for Moto Guzzi

Mini front mudguard for Moto Guzzi 2

Moto Guzzi

Mini front mudguard for Moto Guzzi

Mini front mudguard for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9, manufactured out of stainless steel. This front fender is very short, it enables you visually lighten the front of your motorcycle. It's pre-drilled so it fits the original fixation system of your motorcycle. It's designed and manufactured by our team at the workshop in France. It's...

Rear mudguard wiring harness for Moto Guzzi

Rear mudguard wiring harness for Moto Guzzi 2

Moto Guzzi

Rear mudguard wiring harness for Moto Guzzi

Rear mudguard wiring harness for Moto Guzzi. This wiring harness is essential to connect an aftermarket set of turn indicators and taillight on your Moto Guzzi. It's plug & play over the factory connector. This parts fit the Moto Guzzi V7, V7 II, V7 III, V7 850 and V9. It's available in Short and Long size. Subject to the right wiring length on your...

Tracker bar handlebars

Tracker bar handlebars 2

Parts

Tracker bar handlebars

Tracker Bar handlebars, manufactured out of aluminium. This Tracker type handlebar has Ø28,6mm clamping diameter and Ø22mm controls diameter. It's 790mm wide. It offers much pullback to the rider which offers a comfortable riding position. It's available in satin black finish only.

Racer leather seat for Moto Guzzi V7

Racer leather seat for Moto Guzzi V7 2

Parts

Racer leather seat for Moto Guzzi V7

Racer leather seat for Moto Guzzi V7I, V7II et V7III. This seat is handcrafted by our craftsmen at BAAK's workshop in France, based on a Moto Guzzi seat pan so it remains perfectly suitable for your motorcycle. It's narrower than the original seat, it gives you a cafe racer look. It's available in Aged brown, Black, Gold leather color. Choose a classic,...

Basic 10W turn indicators

Basic 10W turn indicators 2

Parts

Basic 10W turn indicators

Basic 10W turn signals. It has an M10 fixation shaft. The 10w bulb are included. Much more discreet than the original blinkers, it offers a better finish to your motorcycle. Blinkers measurements: 45x55mm. Sold in pairs. It's EU approved for road use.

Bates headlight bracket

Bates headlight bracket 2

Parts

Bates headlight bracket

Fixation bracket for Bates headlight, required to assemble a headlight with a lower position fixation on your motorcycle. Manufactured out of aluminium, 4mm thick, black powder coat painted. Ø6mm between axes holes, adjustable from 68mm to 95mm Ø10mm headlight fixing holes

Yellow H4 bulb

Yellow H4 bulb 2

Parts

H4 Yellow bulb

Yellow H4 bulb for motorcycle lighthouse. This bulb adapts to any lighthouse equipped with an original H4 bulb. It allows you to provide the lighting of your machine with a resolutely vintage appearance, without affixing a filter on the window of your headlight. This product preserves the lighting qualities of your machine, to be favored with respect to...