Best sellers

Showing 73-108 of 277 item(s)

Classic Medium front mudguard for Moto Guzzi

-20%

Moto Guzzi

Classic Medium front mudguard for Moto Guzzi

€96.00 €120.00

Classic Medium front mudguard for Moto Guzzi V7 I, V7 II, V7 III and V7 850, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled so it fits the original fixation system of your motorcycle. It's designed and manufactured by our team at the workshop in France. It's available in satin black,...

View

Home

T-shirt of the Month - BAAK

€29.99

Ultra-Limited July Edition. Dispatch from 1 July.

View

Parts

Round 21W turn indicators

€69.00

Round 21W Aluminum blinkers, 40mm (1&1/2") diameter, with 21W bulbs and M10 fixation shaft. Very nice finishes, much more discreet than most of the original turn indicators. Be careful to respect the polarity when connecting. Sold in pairs. UE approved for road use.

-15%

Parts

Wire Splitter

€8.16 €9.60

The wire splitter provides you with an additional connection point. Compatible with all BAAK wiring harnesses.

Rear Brake Master Cylinder Protection for Royal Enfield 650

-35%

Royal Enfield

Rear Brake Master Cylinder Protection for Royal Enfield 650

€23.40 €36.00

Protect your rear brake master cylinder while adding an aesthetic touch to your Royal Enfield 650 with this robust and stylish protection. Available in a brushed or satin black finish, this inox protection is designed to withstand the elements and impacts.

View

Bouchon plat de réservoir pour triumph 2

-30%

Parts

Flat fuel tank cap for Triumph

€40.60 €58.00

Black finish only, without locking system. Made with a black anodized treatment for long-lasting durability and impeccable style. This product was carefully selected by the BAAK workshop team for its elegant look and superior quality. It is easily installed as a direct replacement for the original cap.

Rectifier / turn indicators / horn bracket for Triumph (pre- 2016)

-30%

Triumph

Rectifier / turn indicators / horn bracket for Triumph (pre- 2016)

€34.30 €49.00

This bracket enables you to relocate your rectifier, front turn indicators and horn on a Triumph (pre-2016 - air-cooled) below your steering column. It visually lightens the line of the front of your motorcycle by grouping these parts on one bracket. This bracket is 21,8cm wide and 12cm high. It get assembled in the original place of your horn, under the...

Rear turn indicators brackets for Moto Guzzi

-35%

Moto Guzzi

Rear turn indicators brackets for Moto Guzzi

€19.50 €30.00

Rear turn signals bracket for Moto Guzzi. Enables you to mount your blinkers / indicators on the upper shock absorber axles for a more discreet look. Comes in pairs. This part is available for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9.

View

Triumph

Short exhaust for Triumph (2016-2024)

€1,200.00

Short Exhaust Line for Triumph T100 - T120 - Street Twin - Speed Twin 900 - Thruxton 1200 - Speed Twin 1200 (from 2016, liquid-cooled), designed and manufactured in our workshop. The headers are made of stainless steel, and the silencers are aluminum. This exhaust line delivers a deep, resonance-free sound that is not too loud. It is easy to install,...

View

-20%

Parts

Flat Track handlebars Ø22mm

€72.00 €90.00

Flat Track handlebar ø22mm manufactured out of steel, it enables you to get a more comfortable driving position and a better look. This handlebar has much pullback to the rider, and his flat Track look will make your bike handle better. Available in Ø22mm diameter only, and in Chromed or Brushed finish.

View

Aluminium side covers for Triumph (pre- 2016)

-35%

Triumph

Classic aluminum side covers for Triumph (pre- 2016)

€48.75 €75.00

Classic aluminum side covers for Triumph (before 2016 - air-cooled), available in Brushed or powder coated in Satin Black. It replaces your original plastic side covers. These parts will bring a strongest look to your motorcycle, using noble material while hiding the airbox. Comes with the necessary mounting bracket and hardware, available for right side...

View

Classic Moto Headlight Protection Grille - Universal

Classic Moto Headlight Protection Grille - Universal 2

-30%

Parts

Classic Headlight Protection Grid - Universal

€63.00 €90.00

Stainless steel headlight grille with satin black epoxy coating. Perfectly fits our Classic headlight but can also be adapted to many OEM and aftermarket headlights (180mm diameter).

Parts

VANS 25.4mm Handlebar Grips

€28.80

Vans handlebar grips, right and left, for motorcycles. Featuring the classic waffle sole pattern of Vans® and constructed from ODI's exclusive grip compounds. For handlebars with a 25.4mm (1 inch) diameter, also available below in ø22mm. Sold in pairs.

-30%

Triumph

Rear Brake Caliper Guard for Triumph

€25.20 €36.00

Protect your rear brake caliper with this stainless steel guard, specially designed for Triumph motorcycles. Since the rear caliper of your Triumph is located below the wheel axle, it is naturally exposed to stone impacts during off-road riding and curbs in urban settings. This caliper guard has been specifically designed to cover the caliper and...

View

Classic aluminum side covers for Triumph Speed Twin / Thruxton 1200

Classic aluminum side covers for Triumph Speed Twin / Thruxton 1200 2

-35%

Home

Classic aluminum side covers for Triumph Speed Twin / Thruxton 1200

€48.75 €75.00

Classic side covers for liquid cooled Triumph (2016-...) designed and handcrafted in aluminum in our workshop in France. It replaces your original plastic side covers to bring a strongest look to your motorcycle, using noble material. Available for both left and right side. Comes with all the necessary stainless steel hardware. Available in Brushed or...

View

Rear turn indicators brackets for Royal Enfield by BAAK

-40%

Royal Enfield

Rear turn indicators brackets for Royal Enfield

€18.00 €30.00

Rear turn indicators holders for Royal Enfield. This pair of aluminium brackets will let you mount your turn indicators on the upper shock absorbers axles so it remains discreet. It's satin black high quality powder-coated so it resists over the years. Make sure to select the right model of motorcycle so you receive the holders that are suitable for your...

View

License plate holder triangle for Triumph Thruxton / Speed Twin 1200

License plate holder triangle for Triumph Thruxton / Speed Twin 1200 2

-40%

Thruxton 1200 (2016 -...)

License plate holder triangle for Triumph Thruxton / Speed Twin 1200

€33.00 €55.00

License plate holder triangle for rear fender eliminator kit of Triumph Thruxton 1200 or Speed Twin 1200 (2016-...). This support is dedicated to be assembled on the optional Rear fender removal kit offered by Triumph Motorcycles, or stands for a Short license plate holder for original rear fender on a Speed Twin. It enables you to remove the reflectors...

View

-70%

Lifestyle

T-shirt BAAK Pocket "BMW"

€8.70 €29.00

T-shirt "BAAK Pocket" BMW. This t-shirt is manufactured out of biologic cotton. It has a pocket on the left side of the chest with a black embroidered pattern, and our BMW NineT Bobber silk-screen printed on the back. This t-shirt has a Slim cut, the fabric is white color. It's mixed, both Him and Her will proudly wear it. Size S is more suitable for a...

View

Universal rear plate / fire support I BAAK

-20%

Universal

Universal license plate holder / taillight

€67.20 €84.00

Universal license plate holder / taillight unit, with integrated license plate lightning, mounted on a universal plate holder. Distance between centers of the mounting holes: 45mm (M5 holes). Supplied with the necessary stainless hardware. You can fit this taillight / license plate holder on any rear mudguard. Light dimension : Diameter 70mm / Depth 50mm.

-35%

Parts

Bates headlight bracket

€19.50 €30.00

Fixation bracket for Bates headlight, required to assemble a headlight with a lower position fixation on your motorcycle. Manufactured out of aluminium, 4mm thick, black powder coat painted. Ø6mm between axes holes, adjustable from 68mm to 95mm Ø10mm headlight fixing holes

-15%

Parts

Heritage headlight

€84.15 €99.00

Classic headlight for motorcycle. This M8 side fixation headlight has a ø180mm diameter. The casing and trim ring are metal, the window is plastic. It offers a great finish level, it's reduced casing (only 135mm deep) will offer a more compact look to your motorcycle. It's available with a Chromed or Brushed trim ring. Depending on the motorcycle model...

View

Short rear mudguard for Triumph (pre- 2016)

-20%

Triumph

Heritage rear mudguard for Triumph (pre- 2016)

€288.00 €360.00

Heritage rear mudguard for Triumph (pre-2016 - air-cooled) manufactured out of stainless steel. It's shorter than your original Triumph rear mudguard, but it respects the original Triumph lines making it visually lighter, while keeping a good protection against the rear wheel projections. Equipped with a LED taillight (CE approved for road use) with...

View

-15%

Home

FICTECH microfiber

€5.02 €5.90

Discover the FICTECH microfiber for cleaning and caring for your motorcycle. Designed to meet the needs of vehicle enthusiasts, this microfiber offers professional-grade quality for a flawless clean without scratches.

Short exhaust for Royal Enfield 650 Interceptor / Continental GT

Interceptor / Continental GT 650

Short exhaust for Royal Enfield 650 Interceptor / Continental GT

€960.00

Short exhaust line for Royal Enfield 650 Interceptor / Continental GT (2018-...), designed and manufactured by our craftsmen in France. The manifolds are stainless steel, the mufflers are aluminium. It provides a stronger and deeper sound than the original exhaust, but remains discreet. Despite the huge care we brought to making it discreet, it's not...

View

Airbox removal kit for Triumph T120 (2016)

Airbox removal kit for Triumph T120 (2016) 2

-30%

Bonneville T120 (2016 -...)

Airbox removal kit for Triumph T120 (2016)

€196.00 €280.00

Airbox removal kit for Triumph Bonneville T120 (2016-...). This kit enables you to visually lighten the line of your motorcycle and make it breathe better. This kit includes: The aluminium battery box (Satin black only) A pair of "camembert" air filters A pair of aluminium side covers (Satin black or Brushed) with or without saddlebag(s) All the...

View

Triumph

License plate holder kit for Triumph Thruxton 1200 / Speed Twin 1200

€210.00

License plate holder kit for Triumph Thruxton 1200 and Speed Twin EUR4 / EUR5 (2016-...). This simple satin black aluminium wheel arch visually lightens the tail of these two Triumph models to reach a more radical aesthetic. This kit includes a LED taillight (CE approved) with license plate lightning, a license plate holder on choice (side or classic...

View

Bates headlight bracket for Royal Enfield 650 Interceptor / Continental GT

-35%

Interceptor / Continental GT 650

Bates headlight bracket for Royal Enfield 650 Interceptor / Continental GT

€16.25 €25.00

Bates headlight fixation bracket for Royal Enfield 650 Interceptor / Continental GT, required to mount a lower fixation headlight (Bates style) on your motorcycle. Manufactured out of aluminium, 3mm thick, black powder coat painting. Available in black finish only. This bracket comes with all the necessary stainless steel screwing.

License plate holder for Royal Enfield Classic / Bullet original mudguard

License plate holder for Royal Enfield Classic / Bullet original mudguard 2

-30%

Bullet / Classic (2008- ..)

License plate holder for Royal Enfield Classic / Bullet original mudguard

€117.60 €168.00

Discreet license plate holder for Royal Enfield Classic / Bullet 500 original mudguard. It's equipped with a ø70mm EU approved taillight with integrated license plate lightning, a plug & play wiring harness, turn indicators brackets on choice and optional turn indicators. This part comes in place of your original taillight / license plate holder unit....

View

Original turn indicators brackets kit for Triumph (2016)

-35%

Triumph

Original turn indicators brackets kit for Triumph (2016)

€19.50 €30.00

Turn signals brackets kit to relocate the factory or accessories indicators from Triumph that have keyed connection, to visually lighten your motorcycle. The front bracket comes on your oil-cooler, and the rear brackets come on the shock absorbers axles. These bracket kit comes without turn indicators.

View

Moto Guzzi

Rear mudguard wiring harness for Moto Guzzi

€19.00

Rear mudguard wiring harness for Moto Guzzi. This wiring harness is essential to connect an aftermarket set of turn indicators and taillight on your Moto Guzzi. It's plug & play over the factory connector. This parts fit the Moto Guzzi V7, V7 II, V7 III, V7 850 and V9. It's available in Short and Long size. Subject to the right wiring length on your...

View

-40%

Parts

Headlight struts

€13.20 €22.00

Motorcycle headlight struts, manufactured out of aluminum, to perfectly adjust the position of your headlight. The hole diameter is ø8mm, the exterior diameter is ø29mm. For Moto Guzzi V7 Classic or Heritage headlight, choose the 10mm ones. For Triumph and Royal Enfield Classic or Heritage headlight, choose the 5mm ones. Comes in pairs.

View

Monza type tank cap for motorcycle guzzi v7iii / v9

Monza type tank cap for motorcycle guzzi v7iii / v9 2

Moto Guzzi

Monza gas cap for Moto Guzzi V7III / V9

€150.00

Monza gas cap for Moto Guzzi V7 III and V9. The timeless design of this Monza cap will perfectly suit your gas tank thanks to our adapter. The full kit is composed by the polished aluminium gas cap, a seal, the necessary mounting hardware and the adapter. It doesn't have any lock system and simply opens by pushing on the opening button. It is only...

-20%
New

Parts

"Camembert" air filters

€78.40 €98.00

"Camembert" style round air filters. This pair of air filters offers a retro look and a great filtration quality to your motorcycle. Connection sleeve : Ø53,5mm Filter : Ø139mm and 41mm thick. Comes in pair with two stainless steel fixation collars. These filters are only suitable for Triumph Bonneville T120.

Royal Enfield

Rear Wiring Harness Only for Royal Enfield 650

€19.00

This wiring harness allows you to connect an aftermarket turn signal and rear light assembly to your Royal Enfield 650. It is plug & play with the original connectors of your bike. Available in short and long sizes. Designed and manufactured by our team at the BAAK workshop.

-30%

Home

Universal Reflector for License Plate

€6.93 €9.90

Black finish, mounts on the license plate bracket or directly on the license plate.

US plate bracket for original mudguard Royal Enfield 650 Inter/GT

US plate bracket for original mudguard Royal Enfield 650 Inter/GT 2

-35%

Parts

US plate bracket for original mudguard Royal Enfield 650 Inter/GT

€29.25 €45.00

This plate holder is suitable for US format license plates (horizontal 170x100mm). It is made of 3mm-thick aluminum, painted with satin black epoxy paint. This plate holder is to be purchased in addition to the original fender plate holder in order to convert it to fit US plates. Made in France