Products

Showing 241-264 of 374 item(s)

Aluminium turn indicators holders for license plate

Aluminium turn indicators holders for license plate 2

-15%

Parts

Turn indicators holders on license plate

Time left

These aluminium turn indicators holders are designed to be assembled on a BAAK license plate holder, on the motorcycle of your choice. It's available in 3 different versions : For turn indicators with øM8 shafts For turn indicators with øM10 shafts For original / accessory Triumph turn indicators (2016-...) It comes with the necessary stainless steel...

Parts

License plate lightning

€18.00

LED license plate lightning. This LED license plate lightning is approved according to the ECE European standards (12V / 2W). We use it on some license plate holders manufactured at BAAK's. Measurement of the license plate lightning : Length 17mm Diameter 12mm øM8 fixation shaft.

View

Leather handlebar pad for motorcycle (black, brown, red, gold)

Leather handlebar pad for motorcycle (black, brown, red, gold) 2

-15%

Parts

Leather handlebar pad

€63.75 €75.00

Time left

Leather-covered handlebar pad. Appart from the protection brought by this pad in case of shock with your handlebar, his leather cover will bring a classic off road look to your motorcycle. Our craftsmen re-interpreted the codes of off road bar pads to give it an aesthetic use. The inner diameter for the crossbar is ø12mm, the external diameter of the pad...

BAAK black aluminium headlight brackets for motorcycles

BAAK black aluminium headlight brackets for motorcycles 2

-15%

Parts

Universal short headlight clamps for classic motorcycles

€109.65 €129.00

Time left

Headlight bracket for motorcycles, for M8 side headlight fixation, with optional front turn indicators holders. Designed and manufactured at BAAK's in France. Perfect to put a BAAK headlight on your motorcycle and improve its finish level. Ø39 - 40mm for Moto Guzzi V7I / V7 II / V7 III / V7 850 / V9 (60mm size) Ø41 - 42mm for Triumph Bonneville T100 / SE...

License plate holder for US format side license plates

License plate holder for US format side license plates 2

-15%

Parts

License plate holder for US format side license plates

€38.25 €45.00

Time left

This license plate holder is suitable for US size license plates (vertical) mounted in side position. It's manufactured out of 3mm thick aluminium and it's satin black powder coat painted. This part is only suitable for BAAK side license plate holders.

View

Double optics headlight plate for motorcycles - BAAK

Double optics headlight plate for motorcycles - BAAK 2

Parts

Universal Trail headlight plate

€465.00

Our universal double optics headlight plate takes its inspiration from the 80's Trail universe. Perfect for a Scrambler project, this headlight plate is designed by our team and manufactured out of glass fiber. It includes a wiring harness extension and aluminium fixation brackets supposed to be assembled on the fork tubes (ø39 - ø40mm / ø41 - ø42mm /...

Universal

Universal handlebars controls kit

€198.00

This Universal handlebars controls kit is essential to clear your cockpit. Each part of the kit must be purchased separately : Brake master cylinder Throttle Clutch lever This kit designed by our craftsmen shows a perfect finish level thanks to his assembly quality and satin black powder coat painting. These parts are available for classic and vintage...

Leather boot protector for motorcycle gear shift by BAAK

Lifestyle

Leather boot protector

€45.00

This leather piece will protect your shoes from the marks left by the gear shift. This boot protector is reversible, it's Aged brown on one side, Black on the other side so it matches any shoes you wear while riding. This shift protector is manufactured out of the same leather as we use on our motorcycle parts, which guarantees a perfect durability over...

View

-15%

Parts

BAAK N°1 handlebars Ø25,4mm

€135.15 €159.00

Time left

Wide stainless steel BAAK N°1 handlebars in Ø25,4mm (1 inch). It's flatter, wider and has more pullback / sweep to the rider than most of the other handlebars. It will offer a very distinguished look to your motorcycle, and improve its handling qualities and your riding position. It's available in Satin black and Brushed finish. The stainless steel tubes...

Leather wiring harness cover for Triumph Bobber airbox removal kit

Leather wiring harness cover for Triumph Bobber airbox removal kit 2

Bonneville Bobber (2017 -...)

Wiring cover for airbox removal kit Triumph Bobber (2017)

€165.00

Our Airbox removal kit for Triumph Bobber (2017-...) lets you remove your original airbox of your machine. Now we offer the elegant leather piece hiding the wiring harness separately, without the filters. Designed and manufactured at the workshop by our craftsmen, this wiring harness cover is available in brown, black, gold and ruby leather.

Fork spring blocks for Triumph Street Scrambler (2016)

Street / Speed Twin 900 (2016 -...)

Fork spring blocks for Triumph Street Scrambler (2016)

€19.00

This pair of stainless steel fork spring blocks let you rise the front of your Triumph Street Scrambler (2016-...) by 10mm, particularly if you choose longer shock absorbers for your machine. These blocks simply come on top of your original fork springs.

Mini Classic low front mudguard for Royal Enfield 650

Mini Classic low front mudguard for Royal Enfield 650 2

-15%

Front end & chassis

Mini Classic low front mudguard for Royal Enfield 650

€242.25 €285.00

Time left

This Mini Classic low front mudguard for 17'' wheel for Interceptor / GT 650 support will allow you to put a mudguard as close as possible to your 17-inch front wheel. We have designed this bracket to adapt to the new height of your front wheel and visually lower the look of your Royal Enfield. The Roadster look at your fingertips ... Made in France

Front Sprocket -1 teeth for Interceptor / Continental GT 650

Engine & Exhaust

Front Sprocket -1 teeth for Interceptor / Continental GT 650

€57.00

Go from 15 to 14 teeth on your PSB and gain torque across the entire rev range. The acceleration will be sharper and stronger, top speed will not be sacrificed. We equip our Royal Enfield Interceptor BAAK Aventures with these output gearbox pinion in order to be more comfortable during our off-road courses!

Airbox removal kit for Royal Enfield Interceptor / Continental GT 650

Products

Airbox removal kit for Royal Enfield Interceptor / Continental GT 650

€495.00

Give your bike a Roadster look by freeing up the space where the original airbox of your Royal Enfield Interceptor or GT use to be by replacing it with 2 air filters, a sniffer and a pair of shiny black mini side panels. This kit will create a hollow space and will visually lighten the bike. The air filters will no longer be hidden, their function is...

Parts

Replacement BAAK exhaust mufflers

€588.00

Replacement BAAK exhaust mufflers are sold by pair with mounting brackets and screws. Select the model of your motorcycle and we will make these silencers that will perfectly fit to BAAK manifolds. The muffled sound remains the same, the finish equaled.

Parts

7’' full LED headlight Bottom Mount

€419.94

Lighting can significantly change the look of your motorcycle. Switch to LED with this black neo-retro headlight with daytime running light function. Beyond giving you more light to see better and be seen better, style is important! We use this headlight in particular on our BMW R NineT Street Tracker.

BAAK Large Daytona speedo for Royal Enfield 650

Parts

Large Daytona speedo for Royal Enfield 650

€489.00

Large Daytona Speedo with tachometer, for Royal Enfield 650 Interceptor / Continental GT (2018 -...). This plug & play solution is ideal for streamlining the cockpit of your Royal Enfield while retaining the functionality of your original meter.

Classic headlight / integrated Daytona speedometer for Royal Enfield 650 Interceptor / Continental GT

Parts

Classic headlight / integrated Daytona speedometer for Royal Enfield 650 Interceptor /...

€599.00

Daytona gauge with speedometer and tachometer integrated in the Classic headlight, for Royal Enfield 650 Interceptor / Continental GT (2018 -...). This plug & play gauge solution is ideal for streamlining the cockpit of your Royal Enfield while retaining the functionality of your original gauge. The bucket and trim ring are available in different...

BAAK | Tiny Daytona speedo for Royal Enfield 650

Parts

Tiny Daytona speedo for Royal Enfield 650

€369.00

Mini Daytona speedometer, for Royal Enfield 650 Interceptor / Continental GT (2018 -...). This plug & play solution is ideal for streamlining the cockpit of your Royal Enfield while retaining the functionality of your original meter. We use this gauge on our trail 650 model. Please consult the assembly instructions before purchasing

View

Parts

Land Rover Defender Fender vents

€110.00

The devil is in the details and this exactly why we’ve decide to add these beautiful metal fender vents to our new line of parts for Land Rover Defender. These are beautiful upgrades over the factory plastic vents. Both the Design and R&D departments worked jointly on this line of parts so Defender’s owner can personalized their beloved vehicle to...

View

-15%

Home

Système anti-vibration Bullet 500

€91.96 €108.19

Time left

Bullet 500 anti-vibration system: this crankshaft plate, located behind the ignition flywheel, reduces engine vibrations by 50%.

BAAK | Trail engine protection for Triumph T100/T120.

BAAK | Trail engine protection for Triumph T100/T120. 2

-15%

Parts

Trail engine protection for Triumph T100/T120

€123.25 €145.00

Time left

Aluminium engine protection for Triumph T100/T120 (2016-…) with an adventurer look and for the best protection.

View

Adapter for high front fender and Bates headlight for Street Scrambler (2019)

Adapter for high front fender and Bates headlight for Street Scrambler (2019) 2

-15%

Parts

Adapter for high front fender and Bates headlight for Street Scrambler (2019)

€25.50 €30.00

Time left

Essential for mounting BAAK bates headlights and BAAK scrambler front mudguard on Street Scramblers from 2019.

View

Flat leather seat for Royal Enfield Interceptor / Continental GT

Parts

Flat leather seat for Royal Enfield Interceptor / Continental GT

€540.00

Flat leather seat for Royal Enfield Interceptor / Continental GT. This seat is handcrafted by our craftsmen at the BAAK's workshop in France, based on an original Royal Enfield seat pan so it perfectly fits your motorcycle. The shape of the leather cover makes it look very thin while keeping a good seating comfort. It's available in Aged brown, Black,...