Triumph

Showing 1-142 of 142 item(s)

Triumph

Bates headlight bracket for Triumph Thruxton 1200 / Speed Twin

Bates headlight fixation bracket for Triumph Thruxton 1200 and Speed Twin. This bracket fits the lower fork triple trees of the Thruxton 1200 / Speed Twin and enables you mount any Bates headlight with a lower fixation on your motorcycle. Distance between the fixation holes axis : 113mm. 4mm thick machined aluminium. Satin black powder coat painting.

Triumph

Lowering kit for Triumph Thruxton 1200 / Speed Twin

€1,110.00

Aluminium upper triple trees kit for lowering, for Triumph Thruxton 1200 and Speed Twin (2016-...). This flat upper triple trees in machined aluminium has the same width as your original one but enables to lower the front end of your bike by 25mm without lifting up the fork tubes over the stock triple trees, for a perfect aesthetic result. Original...

Classic leather seat for Triumph SpeedTwin (2019)

Speed Twin 1200 (2019 -...)

Classic leather seat for Triumph SpeedTwin (2019)

€690.00

Classic leather seat for Triumph Speed Twin (2019-...). This seat has the same shape as your original Speed Twin one, with the elegance of a leather cover it will highly improve the finish level of your Triumph. The riding comfort will be the same as with your original seat. This seat is manufactured by our craftsmen at BAAK's workshop in France. It's...

Stainless steel silencers for Triumph Thruxton 1200 / Speed Twin

Thruxton 1200 (2016 -...)

Stainless steel silencers for Triumph Thruxton 1200 / Speed Twin

€1,015.00

Pair of stainless steel exhaust mufflers for Triumph Thruxton 1200 (liquid cooled). These silencers are manufactured in France and available in Polished or Brushed finish. It offers a deep and smooth sound. Not compliant with European regulations, but it sounds reasonably loud (less than 100 Db). It comes in pairs with all the necessary mounting hardware...

License plate holder triangle for Triumph Thruxton / Speed Twin 1200

Thruxton 1200 (2016 -...)

License plate holder triangle for Triumph Thruxton / Speed Twin 1200

€55.00

License plate holder triangle for rear fender eliminator kit of Triumph Thruxton 1200 or Speed Twin 1200 (2016-...). This support is dedicated to be assembled on the optional Rear fender removal kit offered by Triumph Motorcycles, or stands for a Short license plate holder for original rear fender on a Speed Twin. It enables you to remove the reflectors...

Triumph

License plate holder kit for Triumph Thruxton 1200 / Speed Twin 1200

€210.00

License plate holder kit for Triumph Thruxton 1200 and Speed Twin EUR4 / EUR5 (2016-...). This simple satin black aluminium wheel arch visually lightens the tail of these two Triumph models to reach a more radical aesthetic. This kit includes a LED taillight (CE approved) with license plate lightning, a license plate holder on choice (side or classic...

Triumph

Big Body shock absorbers for Triumph Thruxton 1200 / Speed Twin (2016)

€642.00

Wide Big Body shock absorbers for Triumph Thruxton 1200 and Speed Twin 1200 (2016-...). With our manufacturing partner, we designed these aluminium shocks in order to give a stronger look and a better shocks absorption skills to the Triumph Modern Classic motorcycles. It's adjustable in hydraulic compression and relaxation thanks to an only knob, which...

Side leather saddlebag for Triumph Thruxton 1200 and Speed Twin

Side leather saddlebag for Triumph Thruxton 1200 and Speed Twin 2

Speed Twin 1200 (2019 -...)

Side leather saddlebag for Triumph Thruxton 1200 / Speed Twin (2016)

€287.40

Side leather saddlebag for Triumph Thruxton 1200 / Thruxton R / Speed Twin (2016-...). This side bag is handcrafted at our workshop using the same leather as on our seats. It enables you transport some stuff and gives a retro distinguished look to your Triumph. It's available in Aged brown, gold, black leather. Saddlebag measurements: 20cm x 20cm x 7cm....

Triumph

Tracker kit for Triumph Street Twin / T100 (2016)

€6,600.00

Our craftsmen designed this kit to turn the Triumph Street Twin and Bonneville T100 (2016-...) into Trackers. Our work focused on the aesthetic asked as much as on the handling to make these machines more exciting. Compact, clear-lined, aggressive... Many superlatives that will make your machine stand out from the mass once this kit is assembled on. Build...

Parts

Leather Conditioner

€18.00

This leather conditioner is a nourishing milk. It penetrates and nourishes the leather. You can use it for your saddles but also for your other leather products : shoes, jackets, gloves, saddlebags, etc. It comes with all the seat we offer. Capacity : 100 ml.

Triumph

2Win shock absorbers for Triumph (2016)

€466.00

2 Win aluminum shock absorbers for Triumph (liquid-cooled - since 2016). These shocks are adjustable in spring preload and hydraulic.Each click of the knob changes the setting of hydraulic compression and rebound simultaneously, it's very easy to use even while riding. Available in 340mm and 350mm length. Shock absorbers manufactured in aluminum in...

Triumph

Big Body shock absorbers for Triumph (2016)

€642.00

We designed these aluminum shocks in order to give a stronger look and a better shocks absorption to the Triumph Modern Classic motorcycles. It's adjustable in hydraulic compression and rebound thanks to a single knob, which makes it really easy to use, even while riding. It's the largest shock absorbers you can find for these Triumph models (diam....

Triumph

Monza gas cap for Triumph

€150.00

Monza gas cap for Triumph Modern Classics. The timeless design of this Monza cap will perfectly suit your gas tank thanks to our adapter. Only suitable for Triumph Modern Classics: Air cooled (2000-2016) and new Liquid Cooled (since 2016). The full kit is composed by the polished aluminium gas cap, a seal, the necessary mounting hardware and the adapter....

Triumph

Classic aluminum side covers for Triumph (2016)

€75.00

Classic side covers for liquid cooled Triumph (2016-...) designed and handcrafted in aluminum in our workshop in France. It replaces your original plastic side covers to bring a strongest look to your motorcycle, using noble material. Available for both left and right side. Comes with all the necessary stainless steel hardware. Available in Brushed or...

Turn indicators wiring harness for Triumph (2016-...)

Parts

Turn indicators wiring harness for Triumph (2016)

€29.00

This turn indicators wiring harness is necessary to fit new turn signals on your Triumph (2016-... I liquid cooled) without having to splice wires. This 160mm (6 &19/64") long wiring harness is plug and play on the original connectors of your motorcycle. This 160mm (6 &19/64") long wiring harness is perfect to achieve the assembly of aftermarket...

Triumph

Big Body shock absorbers for Triumph (pre- 2016)

€642.00

We designed these aluminum shocks in order to give a stronger look and a better shocks absorption to the Triumph Bonneville, Thruxton and Scrambler 865. It's adjustable in hydraulic compression and rebound thanks to a single knob, which makes it really easy to use, even while riding. It's the largest shock absorbers you can find for these Triumph models...

Triumph

2Win shock absorbers for Triumph (pre-2016)

€466.00

2Win aluminum shock absorbers for Triumph (before 2016 - air-cooled). These shocks are adjustable in spring preload and hydraulic. Each click of the knob changes the setting of hydraulic compression and rebound simultaneously, it's very easy to use even while riding. If you choose a shorter set than the original one, we recommend you to also go for our...

Triumph

Rear mudguard wiring harness for Triumph

€19.00

Rear mudguard wiring harness for Triumph. This wiring harness is necessary to connect an aftermarket set of turn indicators and taillight on your Triumph. It's plug & play over the factory connector, just make sure to select the right model. Comes standard with all the mudguards we sell for Triumph. Manufactured at BAAK's workshop in France.

Triumph

Bates headlight bracket for wide triple trees for Triumph (2016)

€25.00

This Bates headlight fixation bracket fits the Triumph Bonneville T100 / T120 / Street Twin / Street Scrambler new generation (2016-...) equipped with our Wide fork triple yokes for Triumph. It's manufactured out of 4mm thick machined aluminium. Satin black powder coat painting.

Triumph

Motogadget M-Tri for Triumph (pre- 2016)

€199.50

Multiplexing M-Tri box manufactured by Motogadget for Triumph Bonneville, Scrambler and Thruxton EFI since 2011 (equipped with digital speedometer). Essential to remove your original speedometer, because without it the motorcycle will not start. This M-tri enables you keep all all the original features of your speedometer, in order to fit any kind of...

Triumph

Classic rear mudguard for Triumph (2016 )

€300.00

Classic rear mudguard for Triumph (2016 - liquid-cooled) manufactured out of stainless steel. Shorter than your original rear mudguard, it has an elegant raw look thanks to the molded edge at its end. You will still keep good protection against the rear wheel projections. Equipped with a LED Bates taillight (CE approved for road use) with license plate...

Triumph

Classic aluminum side covers for Triumph (pre- 2016)

€75.00

Classic aluminum side covers for Triumph (before 2016 - air-cooled), available in Brushed or powder coated in Satin Black. It replaces your original plastic side covers. These parts will bring a strongest look to your motorcycle, using noble material while hiding the airbox. Comes with the necessary mounting bracket and hardware, available for right side...

Parts

Master bar handlebars

€159.00

Master Bar handlebars, manufactured out of steel. This flat track style handlebar has Ø28,6mm clamping diameter and Ø22mm controls diameter. It offers much pullback to the rider which offers a comfortable riding position. It's very wide which will help you with the handling of your motorcycle. It's available in satin black finish only.

Triumph

Classic Medium front mudguard for Triumph

€120.00

Classic Medium front mudguard for Triumph, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled so you can easily fit it on the Triumph model of your choice. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, brushed and ready to...

Triumph

Heritage rear mudguard for Triumph (2016 )

€360.00

Heritage rear mudguard for Triumph (2016 - liquid-cooled) manufactured out of stainless steel. It's shorter than your original mudguard, but it respect the original Triumph lines making it visually lighter, while keeping a good protection against the rear wheel projections. Equipped with a LED taillight (CE approved for road use) with integrated license...

Triumph

Mini front mudguard for Triumph

€165.00

Mini front mudguard for Triumph, manufactured out of stainless steel. This front fender is very short, it enables you get a more compact look on the front end of your motorcycle. It's pre-drilled so you can easily fit it on your model of Triumph. It's designed and manufactured by our team at the workshop in France. It's available in satin black,...

Triumph

Classic rear mudguard for Triumph (pre- 2016)

€300.00

Classic rear mudguard for Triumph (pre-2016 - air-cooled) manufactured out of stainless steel. Shorter than your original Triumph rear mudguard, it has an elegant raw look thanks to the molded edge at its end. You will still keep good protection against the rear wheel projections. Equipped with a LED taillight (CE approved for road use) with license...

Parts

Tracker bar handlebars

€159.00

Tracker Bar handlebars, manufactured out of aluminium. This Tracker type handlebar has Ø28,6mm clamping diameter and Ø22mm controls diameter. It's 790mm wide. It offers much pullback to the rider which offers a comfortable riding position. It's available in satin black finish only.

Triumph

Heritage rear mudguard for Triumph (pre- 2016)

€408.00

Heritage rear mudguard for Triumph (pre-2016 - air-cooled) manufactured out of stainless steel. It's shorter than your original Triumph rear mudguard, but it respects the original Triumph lines making it visually lighter, while keeping a good protection against the rear wheel projections. Equipped with a LED taillight (CE approved for road use) with...

Triumph

Lowering kit for Triumph T100-T120 (2016)

€1,260.00

Aluminium upper triple trees kit for lowering, available for Triumph Bonneville T100 / T120 / Street Twin (2016-... - liquid-cooled). It includes the flat upper triple tree, the handlebar clamps, the ignition switch and / or speedometer bracket, and the short Big Body shock absorbers. This lowering kit was designed and manufactured at our workshop. We use...

Triumph

Long cables kit for Triumph (2016)

€84.00

Long cables kit for Triumph (2016-...), it enables to mount wide handlebars on your motorcycle. This kit includes the front brake hose extension and the clutch cable. We use it on most of our custom Triumph builds.

Triumph

Scrambler front mudguard for Triumph (pre-2016)

€285.00

High front fender for Triumph (pre-2016 - air-cooled). This Scrambler look front mudguard is handcrafted out of stainless steel, and comes on the lower triple trees of your Triumph thanks to the provided black fixation bracket. It offers a good protection against the front wheel projections and a strong off road look to your motorcycle. Available in...

Triumph

Heating grips removal kit for Triumph T120 (2016)

€54.00

Heating grips removal kit for Triumph Bonneville T120 (2016-...). This grips kit enables you assemble any handlebar on your T120 without having to cut notches in it to put the heated grips system back on. The grips are high quality Biltwell Thruster or Renegade ones (25,4mm diameter) which offer more comfort. Comes in pairs.

Front mudguard for Triumph Bonneville (pre- 2016)

Bonneville (2000-2016)

Front mudguard for Triumph Bonneville (pre- 2016)

€165.00

Long and narrow front mudguard for Triumph Bonneville (pre-2016 - air-cooled). It's the narrowest front fender which enables you keep the original metal fixation legs. It's a stainless steel front fender, designed and manufactured in France at BAAK's workshop. It enables to keep a classic look and a good protection against the wheel projections. It's...

Triumph

Original turn indicators brackets kit for Triumph (2016)

€30.00

Turn signals brackets kit to relocate the factory or accessories indicators from Triumph that have keyed connection, to visually lighten your motorcycle. The front bracket comes on your oil-cooler, and the rear brackets come on the shock absorbers axles. These bracket kit comes without turn indicators.

Triumph

Wide fork triple trees kit for Triumph T100-T120 (2016)

€1,200.00

Wide fork triple yokes kit for Triumph Bonneville T100 / T120 (2016-... - liquid-cooled), it enables you mount a wide front tire (3.50). The kit includes the upper and lower triple trees 20mm wider, the lower bearing, the brake discs struts, the handlebar clamps and the wheel axle. Enable to lower the front end by 25mm. This kit is used on our Triumph...

Triumph

Short exhaust for Triumph (2016-2024)

€1,220.00

Short Exhaust Line for Triumph T100 - T120 - Street Twin - Speed Twin 900 - Thruxton 1200 - Speed Twin 1200 (from 2016, liquid-cooled), designed and manufactured in our workshop. The headers are made of stainless steel, and the silencers are aluminum. This exhaust line delivers a deep, resonance-free sound that is not too loud. It is easy to install,...

Triumph

Short leather seat kit for Triumph (2016)

€1,290.00

Short leather seat kit for Triumph (2016-... - liquid-cooled). It enables you reduce the original seat length to get a more compact look and the elegance of a leather seat while keeping two seatings. It comes with: Machined aluminium short subframe system (no welding) Genuine short leather seat Stainless steel mudguard with plate holder and bates...

Triumph

Front mudguard fixation brackets for Triumph (2016)

€45.00

Front mudguard fixation brackets for Triumph (2016-... - liquid-cooled) manufactured out of stainless steel. The fixation brackets enable you adjust the height of your front fender, while guiding the cables along the fork. It particularly useful if you change the diameter of your front wheel. Comes in pair, with stainless steel screws kit, without...

Triumph

Engine protection for Triumph (2016)

€129.40

This sump guard / engine protection is manufactured out of stainless steel. It will give a stronger look to Triumph (2016-... - liquid-cooled). It's 1,5mm thick, and ensures a good protection to your engine against impacts and front wheel splashes. Available in Satin black or Brushed finish. It comes with all the necessary stainless steel screwing kit.

Triumph

Side number panel for Triumph (2016)

€120.00

Side number panel for Triumph (2016-...) manufactured out of aluminium. The number plate is placed on a side aluminium cover that comes to replace the original cover, with all the necessary screwing system. Available for Right or Left side, with the side cover in Brushed or Satin black finish. Made in France

Triumph

Short leather seat kit for Triumph (pre- 2016)

€1,290.00

Short leather seat kit for Triumph (before 2016 - air-cooled). This leather seat kit enables you shorten the rear end of the motocycle to reach a more compact look while keeping two seatings to bring a passenger. No welding required. It comes with assembly instructions. Comes with: Machined aluminium short subframe system Genuine short leather seat...

Triumph

Mini speedometer for Triumph (pre- 2016)

€689.00

Mini speedometer for Triumph Bonneville, Scrambler or Thruxton (before 2016 - air-cooled). It's designed to be assembled on a bracket developed by BAAK, manufactured out of aluminium aluminium, black powder coat painted. It comes assembled and connected to a compatible wiring harness (plug and play). Two fixation brackets available: Above the steering...

Parts

Flat leather seat for Triumph (2016)

€690.00

Flat cafe racer leather saddle for Triumph T100 / T120. Narrower (-2,5cm) than your original seat, with a touch a suede leather on the front, it will give your Triumph an elegant look and considerably improve its finish level. It has a 6cm foam height that provides a good riding comfort. This seat is manufactured by our craftsmen at BAAK's workshop in...

Triumph

Heritage leather seat for Triumph (2016)

€690.00

Classic leather seat for Triumph T120 and T100 (2016-... - liquid-cooled). This seat is narrower (-2,5cm) than your original seat, the shape of its leather cover will give it a more thin and compact look, and highly improve the finish level of your Triumph. It has a 6cm foam height that provides a good riding comfort. This seat is manufactured by our...

Triumph

Side leather saddlebag for Triumph (2016)

€273.00

Side leather saddlebag for Triumph (2016-...). This saddlebag is handcrafted at our workshop in the same leather as our seats. It enables you to transport some stuff and gives a retro distinguished look to your bike. It's available in Aged brown, gold, black leather. Saddlebag measurements: 20cm x 20cm x 7cm. It comes mounting on a Brushed or Satin black...

Triumph

Bates headlight / integrated speedometer for Triumph (pre- 2016)

€650.00

Bates headlight with integrated speedometer for Triumph (pre-2016 - air-cooled). Here's how to purify your Triumph riding post while keeping all the original features of a speedometer. The Tiny speedometer shows the total daily mileage, LED indicator, oil pressure, high beam, gas reserve, hours, maximum speed and neutral. This part comes as plug &...

Triumph

Front mudguard fixation brackets for Triumph (pre- 2016)

€45.00

These stainless steel mudguard fixation bracket enables you to assemble the front fender of your choice on your Triumph Bonneville, Scrambler and Thruxton (before 2016 - air-cooled). They allow to adjust the height of the mudguard, it gets assembled on the original mudguard fixation. Product delivered by pairs.Made in France

Triumph

Stainless steel silencers for Triumph T100-T120 (2016)

€1,095.00

Pair of stainless steel exhaust mufflers for Triumph Bonneville T100 / T120 (2016-... - liquid cooled). These silencers are manufactured in France. Available in Polished, Brushed or Matt black finish, it offers a deeper and smooth sound. Not compliant with European regulations. But It sounds quite discreet (less than 100 Db). Comes in pairs with all the...

Triumph

Rear turn indicators brackets for Triumph

€30.00

Rear turn signals bracket for Triumph. Enables you to mount your turn signals on the upper shock absorber axles for a more discreet look. Compatible with the original passenger grab handle. Make sure to select the right model of motorcycle so you can receive brackets suitable for your motorcycle. Comes in pairs. Length: 50mm.

Triumph

Classic headlight / integrated speedometer for Triumph (pre- 2016)

€840.00

Classic headlight with integrated speedometer for Triumph (pre-2016 - air-cooled). This Ø180mm satin black metal headlight with M8 side fixation, with a Motogadget Chronoclassic inserted in the casing is the right way to visually lighten your riding post while keeping advanced speedometer features. It comes as a plug & play part, pre-wired and...

Triumph

Front turn indicators bracket for Triumph

€30.00

Front turn indicators bracket / support for Triumph is simple, effective and very discreet. It enables you relocate your turn indicators under the steering column. It's stainless steel laser cut and satin black powder coated. It's particularly suitable for our Rectifier bracket for Triumph, or can be tightened on the upper fixation of the oil cooling...

Triumph

Bates headlight plate for Triumph (pre-2016)

€169.00

Bates type headlight plate for Triumph (pre- 2016 - air-cooled). Essential to hide the steering column and all the cables after the mounting of a Bates headlight. Comes with 4 black leather clamps in black, aged brown, gold or ruby color. Available in satin black and raw aluminium finish. Measurements : 220mm x 190mm.

Triumph

Relocated ignition switch control bracket for Triumph (2016)

€30.00

Ignition switch control relocation bracket for Triumph (2016-... - liquid-cooled). It enables to relocate the ignition switch control under the gas tank. Manufactured in inox laser cut. You'll be obliged to relocate your wiring harness under your gas tank. Comes with all the necessary stainless steel screwing. The relocation of your ignition switch...

Triumph

Tiny Motogadget speedo fixation bracket for Triumph (pre- 2016)

€49.00

Tiny Motogadget speedometer fixation bracket for Triumph (pre-2016). It's a machined aluminium bracket, satin black powder coated. This part comes with all the necessary screwing.

Triumph

Side license plate holder for Triumph

€95.00

Side license plate support / holder for Triumph. It attaches to the upper axis of the left shock absorber. It comes with a connection wiring harness that makes it 100% plug and play. Satin black powder coat painting finish. If you choose the optional turn indicators, we'll provide the potential resistors necessary for their proper functioning according to...

Triumph

Rectifier bracket for Triumph (2016)

€45.00

Rectifier bracket for Triumph (2016-... - liquid-cooled). This bracket enables you to relocate your rectifier behind your engine oil cooler instead of the lower fork trees to lighten the front of your bike. Manufactured out of stainless steel laser cut. You'll be obliged to relocate your wiring harness under your gas tank. Comes with all the necessary...

Triumph

Engine protection for Triumph (pre-2016)

€115.00

Aluminium engine protection / sump guard for Triumph (pre-2016 - air-cooled), gives an aesthetic style to your motorcycle and a better protection to your engine. Easy to assemble, comes with stainless steel screws. This skid plate is made by BAAK Motocyclettes team at our workshop in France. We use it on most of our Triumph custom projects. Width : 170mm

Triumph

Side number panel for Triumph (pre- 2016)

€134.40

Side number panel for Triumph (pre-2016 - air-cooled) manufactured out of aluminium. The number plate is placed on a side aluminium cover that comes to replace the original cover, with all the necessary stainless steel screwing system. Available for Right or Left side, with the side cover in Brushed or Satin black finish. Made in France

Triumph

Short Full Black exhaust Triumph (2016-...)

€1,680.00

Short Full Black Exhaust Line for Triumph T100 - T120 - Street Twin - Speed Twin 900 - Thruxton 1200 - Speed Twin 1200 (2016 to 2024 - liquid-cooled), featuring a matte black ceramic coating, designed and manufactured in our workshop. The headers are made of stainless steel, and the silencers are aluminum. This exhaust line delivers a deep,...

Triumph

Side leather saddlebag for Triumph (pre- 2016)

€287.40

Side leather saddlebag for Triumph (pre-2016 - air-cooled). This saddlebag is handcrafted in our workshop in the same leather as our seats. It enables you to transport some stuff and gives a retro distinguished look to your bike. It's available in Aged brown, gold, black leather. It comes mounting on a black satin painted aluminium plate that comes in...

Triumph

Intake covers for Triumph 900 (2016)

€77.00

Pair of aluminium intake covers for Triumph (2016-...). These covers come in place of the original ones to give a better aesthetic look to your motorcycle. It's suitable for Triumph Street Twin / Street Cup and Bonneville T100 (2016-...). It comes by pair. It's available in Satin black and Brushed finish. It comes with all the necessary mounting...

Triumph

Bates headlight plate for Triumph (2016)

€169.00

Bates headlight plate for Triumph (since 2016 - liquid-cooled). This aluminium plate comes to hide the steering column and cables running around after you mounted a Bates headlight (with lower fixation) on your Triumph. The 4 leather collars (brown, black, gold or ruby color) attach the plate to your fork tubes. Available in Satin black or Brushed...

Triumph

Scrambler front mudguard for Triumph (2016)

€333.00

High front fender for Triumph (2016-... - liquid-cooled). This high Scrambler look front mudguard is handcrafted out of stainless steel, and comes on the lower triple trees of your Triumph thanks to the provided black fixation bracket. It offers a good protection against the front wheel projections and a strong off road look to your motorcycle....

Stainless steel silencers for Triumph (pre- 2016)

Bonneville (2000-2016)

Stainless steel silencers for Triumph (pre- 2016)

€996.00

Pair of stainless steel exhaust mufflers for Triumph Bonneville (pre-2016 - air-cooled). These silencers are handcrafted in France. Available in chromed or brushed finish, it offers a deep and smooth sound. Not compliant with European regulations. Their sound is quite discreet (less than 100 Db). It's lighter than your original mufflers and will improve...

Triumph

Mini speedometer Tiny for Triumph (2016)

€1,230.00

Mini speedometer for Triumph (2016-... I Liquid-cooled). This tiny Plug & Play speedometer is THE solution to clear the cockpit of your Triumph while keeping the original features of your speedometer. It comes with a fixation bracket to mount it on one of your fork tube, or under the yokes if you already have one BAAK triple trees kit mounted on. The...

Triumph

Bates headlight / integrated speedometer for Triumph (2016)

€1,350.00

Bates headlight / integrated speedometer for Triumph (2016-... I Liquid-cooled). Inserted into a ø150mm diameter Bates lighthouse casing, this tiny Plug & Play speedometer is a simple solution to clear the cockpit of your Triumph while keeping the features of your original speedo. The speedometer is available in Classic or Vintage finish, the...

Triumph

Rear turn indicators brackets for Triumph (pre- 2016)

€30.00

Rear turn indicators support for Triumph (pre-2016 - air-cooled). Simple, effective and very discreet. It's manufactured out of stainless steel, laser cut (3mm thick) and satin black powder coat painted. It fits with any rear fender. Delivered without turn signals. This part isn't suitable for the original (or accessory) passenger grab bar.

Triumph

Relocated ignition switch control bracket kit for Triumph (pre- 2016)

€49.00

Relocated ignition switch control bracket for Triumph (pre-2016 - air-cooled). This simple ignition switch support enables you to relocate the ignition control between the fuel tank and the left carburetor. Fits on the right side on the injection models (EFI). It requires to move the wiring harness that is in your headlight, under the gas tank, without...

Triumph

Classic Mini front mudguard for Triumph

€108.00

Classic Mini front mudguard for Triumph, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. We drill holes on this mudguard according to the model of Triumph you choose. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black, brushed and...

Triumph

Classic headlight / integrated speedometer for Triumph (2016)

€1,500.00

Classic headlight / integrated speedometer for Triumph (2016-... I Liquid-cooled). Inserted in a ø180mm Classic lighthouse casing, this Plug & Play speedometer is a simple solution to clear the cockpit of your Triumph while keeping the original features of your speedometer and a good readability. The speedometer bottom is available in White or Black...

Triumph

License plate holder for Triumph original mudguard (pre- 2016)

€206.02

License plate holder for Triumph original mudguard (pre-2016 - air-cooled). This license plate support includes a taillight (EU approved), an integrated license plate lightning, a plug & play wiring harness, turn indicators fixation bracket on choice and optional turn indicators. Designed and manufactured at our workshop in France.

Triumph

Brembo brake pads for Triumph

€51.80

Brembo front brake pads for Triumph. Softer than the original ones, these front brake pads are manufactured out of high quality material that provides a perfect braking constancy, as much in cold or high temperature conditions. The friction coefficient is higher than on your original Triumph brake pads, which provide excellent braking performances and...

Triumph

Rectifier / turn indicators / horn bracket for Triumph (pre- 2016)

€49.00

This bracket enables you to relocate your rectifier, front turn indicators and horn on a Triumph (pre-2016 - air-cooled) below your steering column. It visually lightens the line of the front of your motorcycle by grouping these parts on one bracket. This bracket is 21,8cm wide and 12cm high. It get assembled in the original place of your horn, under the...

Triumph

Rectifier bracket for Triumph (pre- 2016)

€30.00

Rectifier relocation bracket for Triumph (pre-2016 - air-cooled). This bracket enables you to relocate the voltage rectifier, in place of the horn. Then the horn can be attached below, on the same bracket. It's manufactured out of aluminum laser cut. You may be obliged to move the original wiring harness under the gas tank. All the necessary screwing...

Leather dye, perfect for motorcycle seats

Leather dye, perfect for motorcycle seats 2

Parts

Leather dye cream

€24.00

This leather dye cream is a maintenance solution. It penetrates the leather and gives it a deep black tint. You can use it for your saddles but also for any other leather product: shoes, jackets, gloves, saddlebags, etc. Capacity: 200 ml. It's available for Black, Gold, Brown and Ruby (red) leather.Should be applied with a cloth, mixed with our...

Parts

Mirror adapter

€15.00

Handlebar adapters, required to mount some mirrors on your handlebar. We offer two different solutions : Adapter for ø22mm handlebars, to mount our mirrors in underbar position (M10 threading) Through rod type adapter, to mount a mirror on a through rod type fixation in classic or underbar position

Parts

H4 Yellow bulb

€12.00

Yellow H4 bulb for motorcycle lighthouse. This bulb adapts to any lighthouse equipped with an original H4 bulb. It allows you to provide the lighting of your machine with a resolutely vintage appearance, without affixing a filter on the window of your headlight. This product preserves the lighting qualities of your machine, to be favored with respect to...

Home

Classic aluminum side covers for Triumph Speed Twin / Thruxton 1200

€75.00

Parts

Exhaust wrap

€93.00

Here are 15 meters (or 49') of exhaust wrap, 5 cm wide (1'' & 31/32), to wrap up your exhaust system and get the BAD BOY look you're aiming at! For the black color thermal wrap, we highly recommend you to paint it with an high temperature paint so the color can resist over the months. Available in Black or Beige color. This is high quality part,...

Stainless steel collars for exhaust wrap

Parts

Stainless steel collars for exhaust wrap

€24.00

This batch of 8 self-fruits in stainless steel will allow you to correctly attach the thermal strip to your exhaust. Don't tell us that you just go to do this with twisted thread. delivered by 8 units.

Parts

Universal 1 button control

€200.00

Universal 1 push button handlebar control, manufactured out of machined aluminum and available for 22mm (7/8") or 25,4mm (1") diameter handlebar. The push buttons can be linked to any functions on the motorcycle. This part has a satin black powder coating, and is designed to be riveted to your handlebar. Diameter : 30mm (1 & 3/16") / Thickness : 17mm...

Parts

21W turn indicators bulbs

209-405

€9.00

Transparent Mini Turn indicators bulbs, 21W, 12V. Comes in pair.

Parts

Left 3-buttons universal switch

€300.00

Universal handlebar controls, including :- an ON/OFF/ON turn signal switch- a push button for the horn- a push button for full headlights (may require adaptation of a relay) Available for 22mm (7/8") or 25,4mm (1") diameter handlebar. This part has a satin black powder coating, and is designed to be riveted to your handlebar.

Parts

Headlight struts

€22.00

Motorcycle headlight struts, manufactured out of aluminum, to perfectly adjust the position of your headlight. The hole diameter is ø8mm, the exterior diameter is ø29mm. For Moto Guzzi V7 Classic or Heritage headlight, choose the 10mm ones. For Triumph and Royal Enfield Classic or Heritage headlight, choose the 5mm ones. Comes in pairs.

Parts

Short fork spring blocks

€19.00

Short fork spring blocks. To proportionally lower the front en of your Triumph or Moto Guzzi V7 when you fit our short shock absorbers, you will need these fork springs blocks. It's 2cm (25/32'') shorter and comes right in place of the original ones.

Parts

Leather cable guides

€8.00

Leather cable guide. This strap enables you fasten your cables, or tie it together to your handlebars. If just like us, your motorcycle's finish is part of your obsessions, this cable guide is perfect for your project. Available in Aged brown, Black and Gold leather. Available in 80mm, 90mm, 115mm or 130mm length. Each strap is 20mm wide. Sold as a...

Parts

Basic 10W turn indicators

€22.00

Basic 10W turn signals. It has an M10 fixation shaft. The 10w bulb are included. Much more discreet than the original blinkers, it offers a better finish to your motorcycle. Blinkers measurements: 45x55mm. Sold in pairs. It's EU approved for road use.

Parts

Round mirror ø8 steel for motorcycle

€39.00

Mini round mirror, Ø8cm diameter with M8 threading, for upper position. The mirror shaft is 13cm long, its shape was specifically designed to guaranty a good rear visibility and a discreet look. Suitable for motorcycles with M10 screwing original mirrors fixation. Sold by unit, available in satin black only. Fit both left and right sides.

Parts

VANS 22mm Handlebar Grips

€28.80

Vans handlebar grips for motorcycles, right and left. Featuring the classic waffle sole pattern of Vans® and constructed from ODI's exclusive grip compounds. For handlebars with a 22mm diameter, also available below in ø25mm. Sold in pairs.

Parts

Bates headlight

€75.00

Bates headlight for motorcycle. This low fixation Bates style headlight is ø15cm diameter. It has a metal casing and trim ring. It's discreet and enables you get a better finish level on your motorcycle. It's available in Chromed, Satin Black or with Black casing and Brushed or Chromed trim ring. It comes with the fixation bracket designed for the model...

Triumph

Headlight brackets for original headlight for Triumph (2016 )

€129.00

Headlight fixation brackets for Triumph original headlight (since 2016). This pair of lighthouse brackets come to replace the original ones and reveal the fork tubes. Suitable for the Triumph T120 / T100 Street Scrambler / Street Twin / Thruxton 1200 (since 2016) original headlights. The optional turn indicators brackets enable mount on the headlight...

Parts

Flat Track handlebars Ø22mm

€90.00

Flat Track handlebar ø22mm manufactured out of steel, it enables you to get a more comfortable driving position and a better look. This handlebar has much pullback to the rider, and his flat Track look will make your bike handle better. Available in Ø22mm diameter only, and in Chromed or Brushed finish.

Parts

Biltwell Renegade handlebars grips

€22.00

Biltwell Renegade handlebar grips, produced by Biltwell for character motorcycle. It offers a better handtaking of your handlebar, a great riding comfort and an incredible look. Handlebar diameter 1" (ø25,4mm) or ø22mm. Comes in pairs. Available in Black only.

Parts

Heritage headlight

€99.00

Classic headlight for motorcycle. This M8 side fixation headlight has a ø180mm diameter. The casing and trim ring are metal, the window is plastic. It offers a great finish level, it's reduced casing (only 135mm deep) will offer a more compact look to your motorcycle. It's available with a Chromed or Brushed trim ring. Depending on the motorcycle model...

Parts

Biltwell Thruster handlebars grips

€22.00

Biltwell Thruster handlebar grips, manufactured by Biltwell for character motorcycle. It offers a better handtaking of your handlebar, a great riding comfort and an incredible look. Handlebar diameter 1" (ø25,4mm) or ø22mm. Comes in pairs. Available in Black and Brown color.

Parts

Leather covered handlebar grips

€145.00

Leather covered handlebars grips. Wrapped with a high quality leather, it gives a touch of chic to your motorcycle while keeping a good takeover. Available in aged brown, gold, black and ruby leather. Four thread stitchings colors available so it perfectly fits your bike. Available for ø25,4mm (1 inch) handlebars.

Aluminium handlebar grips for motocycles classic, vintage, cafe racer

Aluminium handlebar grips for motocycles classic, vintage, cafe racer 2

Parts

Motorcycle handlebar mounts, aluminum

€96.00

Machined aluminium handlebar clamps for motorcycle. These risers are available in ø22mm diameter, ø28,6mm diameter or 1 inch (ø25,4mm) diameter, it's lighter and elegant. The clamps are satin black powder coat painted, and come with stainless steel screwing (size on the choice). Designed and manufactured at BAAK's workshop. Made in France

Parts

Classic headlight

€90.00

Round headlight for classic motorcycles, with M8 side mount and ø180mm diameter. It features metal casing and bezel, with plastic glass, offering an exceptional level of finish. Its streamlined casing gives it a resolutely classic look. Depending on the motorcycle model chosen, a plug and play harness is supplied (which may justify a price difference...

Parts

Headlight bulb wiring extension

€19.00

This headlight wiring harness bulb extension suits any motorcycle equipped with a H4 lighthouse bulb. It enables to connect your headlight to the motorcycle when you relocate the original wiring harness. Length : 420mm This headlight bulb extension is manufactured by ourselves at BAAK Motocyclettes workshop. It comes by default with all our headlight for...

Classic ø10 round aluminum motorcycle mirror

Parts

Classic ø10 round aluminum motorcycle mirror

€64.00

Classic round motorcycle mirror. This black mirror, Ø10cm / diameter, has an impeccable yet discreet finish. It offers perfect rearward visibility and fits any motorcycle. Height-adjustable thanks to 150mm articulated rod. Supplied with two adapters (left-hand and right-hand M10x1.25 mm). Additional adapters are available as options. Approved to European...

Motorcycle mirror under handlebars round ø8 in steel

Parts

Motorcycle mirror under handlebars round ø8 in steel

€60.00

Mini black Ø80mm bike mirror especially designed to be mounted below the handlebar in lower position. It offers a very discreet look and a good rear visibility with its wide angle glass. Available without adapter (for Ø8mm through shaft mounting or with adapter for ø22mm handlebars). Sold individually. Fit both left and right sides, available in satin...

Parts

Universal gas tank leather belt

€126.00

Universal leather gas tank strap / belt, fits with any gas tank with the cap on the side. It gives a distinguished look to your motorcycle tank and protects it from scratches. It comes wrapping your gas tank, is easy to assemble and is adjustable thanks to a metal buckle fastener. Maximum length 190cm, minimum length 107cm. This genuine leather tank...

Parts

Bates headlight bracket

€30.00

Fixation bracket for Bates headlight, required to assemble a headlight with a lower position fixation on your motorcycle. Manufactured out of aluminium, 4mm thick, black powder coat painted. Ø6mm between axes holes, adjustable from 68mm to 95mm Ø10mm headlight fixing holes

Parts

Leather fork gaiters

€240.00

Pair of genuine leather fork gaiters. These 4, 5, 6 or 8 folds fork boots are handcrafted in France, and bring a touch of authenticity and exception to your motorcycle. It's water-repellent and especially designed to resist to an intensive use. Available in Aged brown, black, gold leather color. Diameter Ø41mm top and Ø63mm bottom. It comes in pairs with...

Parts

Resistors for LED turn indicators

€15.00

Resistors for LED motorcycles turn indicators, essential to get a correct blinking speed once your LED blinkers are mounted on a motorcycle that isn't equipped with LED ones in stock configuration. Comes in pairs. You need two pairs to connect both front and rear turn signals on your motorcycle.

Extension for Classic ø10 round motorcycle mirror in aluminium

Parts

Extension for Classic ø10 round motorcycle mirror in aluminium

€22.00

Shaft extension for Classic round mirror. This extension is suitable only for our Classic round mirror. This part enables you make the mirror shaft longer for a better rear view, and makes it easier to adjust. This extension is 55mm long (35mm between holes). Supplied per unit.

Aluminium turn indicators holders for license plate

Aluminium turn indicators holders for license plate 2

Parts

Turn indicators holders on license plate

€30.00

These aluminium turn indicators holders are designed to be assembled on a BAAK license plate holder, on the motorcycle of your choice. It's available in 3 different versions : For turn indicators with øM8 shafts For turn indicators with øM10 shafts For original / accessory Triumph turn indicators (2016-...) It comes with the necessary stainless steel...

Parts

License plate lightning

€18.00

LED license plate lightning. This LED license plate lightning is approved according to the ECE European standards (12V / 2W). We use it on some license plate holders manufactured at BAAK's. Measurement of the license plate lightning : Length 17mm Diameter 12mm øM8 fixation shaft.

Leather handlebar pad for motorcycle (black, brown, red, gold)

Parts

Leather handlebar pad

€75.00

Leather-covered handlebar pad. Appart from the protection brought by this pad in case of shock with your handlebar, his leather cover will bring a classic off road look to your motorcycle. Our craftsmen re-interpreted the codes of off road bar pads to give it an aesthetic use. The inner diameter for the crossbar is ø12mm, the external diameter of the pad...

BAAK black aluminium headlight brackets for motorcycles

BAAK black aluminium headlight brackets for motorcycles 2

Parts

Universal short headlight clamps for classic motorcycles

€129.00

Headlight bracket for motorcycles, for M8 side headlight fixation, with optional front turn indicators holders. Designed and manufactured at BAAK's in France. Perfect to put a BAAK headlight on your motorcycle and improve its finish level. Ø39 - 40mm for Moto Guzzi V7I / V7 II / V7 III / V7 850 / V9 (60mm size) Ø41 - 42mm for Triumph Bonneville T100 / SE...

License plate holder for US format side license plates

Parts

License plate holder for US format side license plates

€45.00

This license plate holder is suitable for US size license plates (vertical) mounted in side position. It's manufactured out of 3mm thick aluminium and it's satin black powder coat painted. This part is only suitable for BAAK side license plate holders.

Double optics headlight plate for motorcycles - BAAK

Double optics headlight plate for motorcycles - BAAK 2

Parts

Universal Trail headlight plate

€465.00

Our universal double optics headlight plate takes its inspiration from the 80's Trail universe. Perfect for a Scrambler project, this headlight plate is designed by our team and manufactured out of glass fiber. It includes a wiring harness extension and aluminium fixation brackets supposed to be assembled on the fork tubes (ø39 - ø40mm / ø41 - ø42mm /...

Universal

Universal handlebars controls kit

€198.00

This Universal handlebars controls kit is essential to clear your cockpit. Each part of the kit must be purchased separately : Brake master cylinder Throttle Clutch lever This kit designed by our craftsmen shows a perfect finish level thanks to his assembly quality and satin black powder coat painting. These parts are available for classic and vintage...

Parts

BAAK N°1 handlebars Ø25,4mm

€159.00

Wide stainless steel BAAK N°1 handlebars in Ø25,4mm (1 inch). It's flatter, wider and has more pullback / sweep to the rider than most of the other handlebars. It will offer a very distinguished look to your motorcycle, and improve its handling qualities and your riding position. It's available in Satin black and Brushed finish. The stainless steel tubes...

Parts

7’' full LED headlight Bottom Mount

€419.94

Lighting can significantly change the look of your motorcycle. Switch to LED with this black neo-retro headlight with daytime running light function. Beyond giving you more light to see better and be seen better, style is important! We use this headlight in particular on our BMW R NineT Street Tracker.

BAAK | Trail engine protection for Triumph T100/T120.

Parts

Trail engine protection for Triumph T100/T120

€145.00

Aluminium engine protection for Triumph T100/T120 (2016-…) with an adventurer look and for the best protection.

Parts

Replacement BAAK exhaust mufflers

€588.00

Replacement BAAK exhaust mufflers are sold by pair with mounting brackets and screws. Select the model of your motorcycle and we will make these silencers that will perfectly fit to BAAK manifolds. The muffled sound remains the same, the finish equaled.

License plate holder for US format with light mount

Parts

License plate holder for US format with light mount

€45.00

This license plate holder is suitable for US size license plates (horizontal). It's manufactured out of 3mm thick aluminium and it's satin black powder coat painted. This support allows you to mount a license plate light. This part is only suitable for BAAK license plate holders.

Parts

Turn indicators / Brake light

€156.00

These minimalism aluminum turn signals keep your motorcycle clean. The rear indicators incorporate stop lights and lights. The front indicators are classic. Light is powerful. Stem øM8, 38mm long, ø22mm optical.

Parts

Large Leather Roll Top Pannier

€897.00

Large Leather Roll Top pannier, carefully handcrafted by our leather worker for people who need pannier on their motorcycle but appreciate fine material and craftsmanship. The Rolled Top pannier is compatible with all SW-Motech SLC side carriers. (side carrier not supplied). Very detailed, this beautiful leather bag is made with BAAK leathers and suede...

Parts

Large Leather Messenger Bag

€897.00

Discover our removable leather satchel, an exceptional piece meticulously handcrafted by our French artisans. Every detail is painstakingly executed, bearing witness to our commitment to quality. This exquisite leather goods creation is crafted from BAAK's top-quality vegetable-tanned leathers. Delivered with an adjustable and detachable strap, this...

Parts

Slip On Exhaust for Triumph (2016 )

€660.00

This pair of mufflers deliver the perfect sound without drone or being obnoxious. Made from aluminum in our workshop in France in a limited production. You won’t see them everywhere… Very easy to install with their bolt on design, goes directly on the factory system.

Large bag holder for Triumph short seat kit (2016 - ...)

Home

Large bag holder for Triumph short seat kit (2016 - ...)

€240.00

Turn indicators holdersDesigned for our large removable rolled pannier or messenger bag, this bracket is compatible with our Triumph Short Seat Kit (2016-...). This bracket is designed to accommodate one or two large panniers if you have a BAAK short seat kit. We've obviously designed it so that the pannier doesn't get in the way of the passenger. The...

Radiator guard for Triumph (2016-...) T120 - T100 - Speed Twin 900

Parts

Radiator guard for Triumph (2016)

€84.00

Protect your Triumph Bonneville (2016-...) radiator with this high-quality stainless steel guard, coated in premium satin black epoxy paint. Designed to last, it offers optimal protection without compromising engine cooling. Comes with stainless steel mounting hardware. Made in France

Daytona Triumph counter, Café Racer prep, Made in France

Daytona Triumph counter, Café Racer prep, Made in France 2

Parts

Mini Daytona speedo for Triumph (2016)

€966.00

The Daytona mini speedometer is compatible with the original handlebar clamps. of modern Triumphs (T120, T100, Speed Twin 900, Scrambler 900) and is a 100% plug and play accessory. Pre-wired in our workshop, it's easy to fit without any modifications and is available in km/h or miles versions. Only compatible with original handlebar clamps. Made in France.

Plug and play headlight for Triumph (2016...)

Parts

Plug and play headlight for Triumph (2016...)

€27.00

Looking to customize your Triumph (2016 and up) without the hassle? This plug and play front headlight pilot light makes it super easy. With a connector fully compatible with your original wiring, you can install an adaptable headlight in no time. Perfect for café racer, scrambler, or bobber projects, it ensures a clean, simple setup. Made in France.

Flat Triple Clamp Triumph T100/T120 – 3 Aluminum Versions | Made in France

Flat Triple Clamp Triumph T100/T120 – 3 Aluminum Versions | Made in France 2

Parts

Flat triple trees Triumph T100/T120

€600.00

Transform your Triumph T100/T120 with this flat, mass-cut aluminum fork crown. Finished in satin black with a high-quality epoxy paint, it comes with a pair of bridges of your choice. This fork crown lowers your bike by 15mm at the front, so we recommend tuning your shocks or opting for our lowering kit. It is also compatible with Street Twin and Speed...

Removable windshield for Triumph Bonneville T100 / T120

Parts

Removable windshield for Triumph Bonneville T100 / T120

€816.00

Equip your Triumph Bonneville T100/T120 with this retro-touring removable windscreen kit. 2 sec to remove without tools.It includes a removable windshield and its mountings, as well as headlight brackets adapted to the original model. This windshield is compatible with the original headlight or any other ø180mm headlight. Not compatible with Triumph...

Round handlebar mirror ø10 HIGHSIDER MONTANA-SLIM EVO SHORT

Round handlebar mirror ø10 HIGHSIDER MONTANA-SLIM EVO SHORT 2

Parts

Round Bar End mirror ø10 HIGHSIDER MONTANA-SLIM EVO SHORT

€84.00

Looking for a discreet, high-performance mirror? The HIGHSIDER MONTANA-SLIM EVO SHORT is for you. With a thickness of just 5 mm, a black anodized aluminum design and convex glass for optimum visibility, this mirror combines style and safety. Easy to install on handlebars from 12 to 22 mm, it complies with E standards for left- or right-hand use.

Bullet-type LED motorcycle turn indicators in black aluminum/brushed finish

Parts

Bullet-type LED motorcycle turn indicators in black aluminum/brushed finish

€78.00

Bullet-type motorcycle LED 10W turn signals in black aluminum with brushed trim combine elegance and efficiency. Featuring clear glass, they measure 20 mm in diameter and 36.5 mm in length. Mounting is simple, thanks to an M8mm screw fastener, and they are compatible with a 12 V system. Supplied sheathed and with ø3.2mm Japanese round crimped lugs....

Classic ø10 round motorcycle mirror in aluminum, long stem

Parts

Classic ø10 round motorcycle mirror in aluminum, long stem

€66.00

The Classic HIGHSIDER MONTANA XL round motorcycle mirror combines elegance and functionality with its timeless design. Its black anodized finish, combined with an extended 25 mm stem, offers enhanced rear visibility. Designed to improve ergonomics and guarantee a minimalist look, it's perfect for vintage and custom motorcycles. Sold individually.

Front brake disc Beringer Classic for Triumph (pre-2016)

Home

Front brake disc Beringer Classic for Triumph (pre-2016)

€492.00

Beringer Classic front brake disc for Triumph (2016-…). Engineered for powerful and long-lasting braking, it offers both performance and durability with its stainless steel tracks and precision-machined aluminum hubs. Sold individually – purchase 2 units for dual-disc front braking.

Bouchon plat de réservoir pour triumph 2

Parts

Flat fuel tank cap for Triumph

€58.00

Available in black finish only, without a locking system. Crafted with a black anodized treatment for exceptional durability and style. This product has been carefully selected by the BAAK workshop team for its elegant design and superior quality. It installs easily as a direct replacement for the original cap.

Rear Fender Eliminator Kit Triumph 2016-...

Parts

Rear Fender Eliminator Kit Triumph 2016-...

€240.00

Looking to streamline the rear of your Triumph Bonneville T100/T120, ST900, or Scrambler 900? This fender eliminator kit with a license plate holder allows you to completely remove the original rear fender. Made from aluminum and stainless steel, the kit comes with a homologated LED taillight and license plate illumination. A plug-and-play adapter...

Parts

41mm Fork Tube Clamp Universal

€45.00

This aluminum bracket attaches to your original fork tube, allowing you to mount accessories such as a speedometer, GPS, switch, etc. Compatible with all 41mm forks. M8 thread.

Triumph

Rear Brake Caliper Guard for Triumph

€36.00

Protect your rear brake caliper with this stainless steel guard, specially designed for Triumph motorcycles. Since the rear caliper of your Triumph is located below the wheel axle, it is naturally exposed to stone impacts during off-road riding and curbs in urban settings. This caliper guard has been specifically designed to cover the caliper and...

Parts

VANS 25.4mm Handlebar Grips

€28.80

Vans handlebar grips, right and left, for motorcycles. Featuring the classic waffle sole pattern of Vans® and constructed from ODI's exclusive grip compounds. For handlebars with a 25.4mm (1 inch) diameter, also available below in ø22mm. Sold in pairs.

Parts

Mini 21W turn indicators

€19.00

Mini 21W turn indicators manufactured out of plastic, with 21W bulb and M10 fixation threading. These turn indicators offer a very good finish level. Sold in pairs. EU approved for road use.

Beringer Classic front brake disc for Triumph (2016 -...)

Home

Beringer Classic front brake disc for Triumph (2016 -...)

€492.00

front brake disc Beringer Classic for Triumph (2016-…). These discs will allow you to give a more aesthetic and elegant look to your front wheel while reducing the weight thanks to the aluminum hub. sold per unit - Provide 2 units for a double disc braking.

Parts

Mini LED 3W motorcycle turn indicator

€54.00

Mini LED 3W turn indicator, manufactured out of aluminium, with Ø8mm shaft. These blinkers are minimalistic, once switched off, it's nearly invisible wether it offers a perfect visibility when running. We use it on main part of our custom motorcycles project at the workshop. Sheathed and with crimped Japanese pods. Blinkers size : 19,5mm x 16mm. 12V....

Parts

Round 21W turn indicators

€69.00

Round 21W Aluminum blinkers, 40mm (1&1/2") diameter, with 21W bulbs and M10 fixation shaft. Very nice finishes, much more discreet than most of the original turn indicators. Be careful to respect the polarity when connecting. Sold in pairs. UE approved for road use.