Thruxton (2004-2016)

Showing 1-36 of 46 item(s)

Leather Conditioner

Leather Conditioner 2

-15%

Parts

Leather Conditioner

€15.30 €18.00

This leather conditioner is a nourishing milk. It penetrates and nourishes the leather. You can use it for your saddles but also for your other leather products : shoes, jackets, gloves, saddlebags, etc. It comes with all the seat we offer. Capacity : 100 ml.

Rear mudguard wiring harness for Triumph

Rear mudguard wiring harness for Triumph 2

Triumph

Rear mudguard wiring harness for Triumph

Rear mudguard wiring harness for Triumph. This wiring harness is necessary to connect an aftermarket set of turn indicators and taillight on your Triumph. It's plug & play over the factory connector, just make sure to select the right model. Comes standard with all the mudguards we sell for Triumph. Manufactured at BAAK's workshop in France.

View

Short leather seat kit for Triumph (pre- 2016)

Short leather seat kit for Triumph (pre- 2016) 2

Triumph

Short leather seat kit for Triumph (pre- 2016)

Short leather seat kit for Triumph (before 2016 - air-cooled). This leather seat kit enables you shorten the rear end of the motocycle to reach a more compact look while keeping two seatings to bring a passenger. No welding required. It comes with assembly instructions. Comes with: Machined aluminium short subframe system Genuine short leather seat...

View

Motogadget Tiny speedometer for Triumph (pre-2016)

Motogadget Tiny speedometer for Triumph (pre-2016) 2

-15%

Triumph

Motogadget Tiny speedometer for Triumph (pre-2016)

€585.65 €689.00

Motogadget Tiny speedometer for Triumph Bonneville, Scrambler or Thruxton (before 2016 – air-cooled) This speedometer is a Plug & Play solution to streamline your cockpit while retaining the original speedometer functions. It is delivered with everything needed depending on the selected motorcycle model (Mounting bracket, M-Tri multiplexing unit,...

View

Bates headlight / integrated speedometer for Triumph (pre-2016)

Bates headlight / integrated speedometer for Triumph (pre-2016) 2

Triumph

Bates headlight / integrated speedometer for Triumph (pre-2016)

Bates headlight with integrated motogadget Tiny speedometer for Triumph (pre-2016 – air-cooled) Integrated into the housing of a ø150mm Bates headlight, this headlight with integrated speedometer is a Plug & Play solution to streamline your cockpit while keeping the functions of your original speedometer. This speedometer comes in a plug & play...

View

Classic headlight with integrated speedometer for Triumph before 2016

Classic headlight with integrated speedometer for Triumph before 2016 2

Triumph

Classic Headlight / Integrated Speedometer for Triumph (pre-2016)

Classic headlight with integrated speedometer for Triumph (before 2016 – air-cooled) This needle speedometer, integrated into a Ø180mm satin black metal headlight with M8 side mounts, is the ideal way to visually lighten the front of your bike while retaining advanced speedometer functionalities. This speedometer is offered in a plug & play version,...

View

Bates headlight plate for Triumph (pre-2016)

Bates headlight plate for Triumph (pre-2016) 2

-30%

Triumph

Bates headlight plate for Triumph (pre-2016)

€118.30 €169.00

Bates type headlight plate for Triumph (pre- 2016 - air-cooled). Essential to hide the steering column and all the cables after the mounting of a Bates headlight. Comes with 4 black leather clamps in black, aged brown, gold or ruby color. Available in satin black and raw aluminium finish. Measurements : 220mm x 190mm.

View

Tiny Motogadget speedo fixation bracket for Triumph (pre- 2016)

Tiny Motogadget speedo fixation bracket for Triumph (pre- 2016) 2

-30%

Triumph

Tiny Motogadget speedo fixation bracket for Triumph (pre- 2016)

€34.30 €49.00

Tiny Motogadget speedometer fixation bracket for Triumph (pre-2016). It's a machined aluminium bracket, satin black powder coated. This part comes with all the necessary screwing.

View

Rear turn indicators brackets for Triumph

Rear turn indicators brackets for Triumph 2

-35%

Triumph

Rear turn indicators brackets for Triumph

€19.50 €30.00

Rear turn signals bracket for Triumph. Enables you to mount your turn signals on the upper shock absorber axles for a more discreet look. Compatible with the original passenger grab handle. Make sure to select the right model of motorcycle so you can receive brackets suitable for your motorcycle. Comes in pairs. Length: 50mm.

View

Rear turn indicators brackets for Triumph (pre- 2016)

Rear turn indicators brackets for Triumph (pre- 2016) 2

-35%

Triumph

Rear turn indicators brackets for Triumph (pre- 2016)

€19.50 €30.00

Rear turn indicators support for Triumph (pre-2016 - air-cooled). Simple, effective and very discreet. It's manufactured out of stainless steel, laser cut (3mm thick) and satin black powder coat painted. It fits with any rear fender. Delivered without turn signals. This part isn't suitable for the original (or accessory) passenger grab bar.

Front turn indicators bracket for Triumph

Front turn indicators bracket for Triumph 2

-35%

Triumph

Front turn indicators bracket for Triumph

€19.50 €30.00

Front turn indicators bracket / support for Triumph is simple, effective and very discreet. It enables you relocate your turn indicators under the steering column. It's stainless steel laser cut and satin black powder coated. It's particularly suitable for our Rectifier bracket for Triumph, or can be tightened on the upper fixation of the oil cooling...

Relocated ignition switch control bracket kit for Triumph (pre- 2016)

Relocated ignition switch control bracket kit for Triumph (pre- 2016) 2

-35%

Triumph

Relocated ignition switch control bracket kit for Triumph (pre- 2016)

€31.85 €49.00

Relocated ignition switch control bracket for Triumph (pre-2016 - air-cooled). This simple ignition switch support enables you to relocate the ignition control between the fuel tank and the left carburetor. Fits on the right side on the injection models (EFI). It requires to move the wiring harness that is in your headlight, under the gas tank, without...

Rectifier / turn indicators / horn bracket for Triumph (pre- 2016)

Rectifier / turn indicators / horn bracket for Triumph (pre- 2016) 2

-30%

Triumph

Rectifier / turn indicators / horn bracket for Triumph (pre- 2016)

€34.30 €49.00

This bracket enables you to relocate your rectifier, front turn indicators and horn on a Triumph (pre-2016 - air-cooled) below your steering column. It visually lightens the line of the front of your motorcycle by grouping these parts on one bracket. This bracket is 21,8cm wide and 12cm high. It get assembled in the original place of your horn, under the...

Leather dye, perfect for motorcycle seats

Leather dye, perfect for motorcycle seats 2

Parts

Leather dye cream

This leather dye cream is a maintenance solution. It penetrates the leather and gives it a deep black tint. You can use it for your saddles but also for any other leather product: shoes, jackets, gloves, saddlebags, etc. Capacity: 200 ml. It's available for Black, Gold, Brown and Ruby (red) leather.Should be applied with a cloth, mixed with our...

View

Mirror adapter for ø22mm handlebar.

Mirror adapter for ø22mm handlebar. 2

Parts

Mirror adapter

Handlebar adapters, required to mount some mirrors on your handlebar. We offer two different solutions : Adapter for ø22mm handlebars, to mount our mirrors in underbar position (M10 threading) Through rod type adapter, to mount a mirror on a through rod type fixation in classic or underbar position

View

Yellow H4 bulb

Yellow H4 bulb 2

Parts

H4 Yellow bulb

Yellow H4 bulb for motorcycle lighthouse. This bulb adapts to any lighthouse equipped with an original H4 bulb. It allows you to provide the lighting of your machine with a resolutely vintage appearance, without affixing a filter on the window of your headlight. This product preserves the lighting qualities of your machine, to be favored with respect to...

21W turn indicators bulbs

Parts

21W turn indicators bulbs

Transparent Mini Turn indicators bulbs, 21W, 12V. Comes in pair.

Universal 1 button control

Universal 1 button control 2

Parts

Universal 1 button control

Universal 1 push button handlebar control, manufactured out of machined aluminum and available for 22mm (7/8") or 25,4mm (1") diameter handlebar. The push buttons can be linked to any functions on the motorcycle. This part has a satin black powder coating, and is designed to be riveted to your handlebar. Diameter : 30mm (1 & 3/16") / Thickness : 17mm...

View

Universal 3 buttons control

Universal 3 buttons control 2

Parts

Left 3-buttons universal switch

Universal handlebar controls, including :- an ON/OFF/ON turn signal switch- a push button for the horn- a push button for full headlights (may require adaptation of a relay) Available for 22mm (7/8") or 25,4mm (1") diameter handlebar. This part has a satin black powder coating, and is designed to be riveted to your handlebar.

View

Headlight struts

Headlight struts 2

-40%

Parts

Headlight struts

€13.20 €22.00

Motorcycle headlight struts, manufactured out of aluminum, to perfectly adjust the position of your headlight. The hole diameter is ø8mm, the exterior diameter is ø29mm. For Moto Guzzi V7 Classic or Heritage headlight, choose the 10mm ones. For Triumph and Royal Enfield Classic or Heritage headlight, choose the 5mm ones. Comes in pairs.

View

Flat Track handlebars Ø22mm

Flat Track handlebars Ø22mm 2

-20%

Parts

Flat Track handlebars Ø22mm

€72.00 €90.00

Flat Track handlebar ø22mm manufactured out of steel, it enables you to get a more comfortable driving position and a better look. This handlebar has much pullback to the rider, and his flat Track look will make your bike handle better. Available in Ø22mm diameter only, and in Chromed or Brushed finish.

View

Leather cable guides

Leather cable guides 2

-40%

Parts

Leather cable guides

€4.80 €8.00

Leather cable guide. This strap enables you fasten your cables, or tie it together to your handlebars. If just like us, your motorcycle's finish is part of your obsessions, this cable guide is perfect for your project. Available in Aged brown, Black and Gold leather. Available in 80mm, 90mm, 115mm or 130mm length. Each strap is 20mm wide. Sold as a...

View

Mini 21W turn indicators

Mini 21W turn indicators 2

Parts

Mini 21W turn indicators

Mini 21W turn indicators manufactured out of plastic, with 21W bulb and M10 fixation threading. These turn indicators offer a very good finish level. Sold in pairs. EU approved for road use.

Round mirror ø8 steel for motorcycle

Round mirror ø8 steel for motorcycle 2

-15%

Parts

Round mirror ø8 steel for motorcycle

€33.15 €39.00

Mini round mirror, Ø8cm diameter with M8 threading, for upper position. The mirror shaft is 13cm long, its shape was specifically designed to guaranty a good rear visibility and a discreet look. Suitable for motorcycles with M10 screwing original mirrors fixation. Sold by unit, available in satin black only. Fit both left and right sides.

View

Bates headlight

Bates headlight 2

-15%

Parts

Bates headlight

€63.75 €75.00

Bates headlight for motorcycle. This low fixation Bates style headlight is ø15cm diameter. It has a metal casing and trim ring. It's discreet and enables you get a better finish level on your motorcycle. It's available in Chromed, Satin Black or with Black casing and Brushed or Chromed trim ring. It comes with the fixation bracket designed for the model...

View

Biltwell Renegade handlebars grips

Biltwell Renegade handlebars grips 2

Parts

Biltwell Renegade handlebars grips

Biltwell Renegade handlebar grips, produced by Biltwell for character motorcycle. It offers a better handtaking of your handlebar, a great riding comfort and an incredible look. Handlebar diameter 1" (ø25,4mm) or ø22mm. Comes in pairs. Available in Black only.

View

Heritage headlight

Heritage headlight 2

-15%

Parts

Heritage headlight

€84.15 €99.00

Classic headlight for motorcycle. This M8 side fixation headlight has a ø180mm diameter. The casing and trim ring are metal, the window is plastic. It offers a great finish level, it's reduced casing (only 135mm deep) will offer a more compact look to your motorcycle. It's available with a Chromed or Brushed trim ring. Depending on the motorcycle model...

View

Biltwell Thruster handlebars grips

Biltwell Thruster handlebars grips 2

Parts

Biltwell Thruster handlebars grips

Biltwell Thruster handlebar grips, manufactured by Biltwell for character motorcycle. It offers a better handtaking of your handlebar, a great riding comfort and an incredible look. Handlebar diameter 1" (ø25,4mm) or ø22mm. Comes in pairs. Available in Black and Brown color.

View

Leather covered handlebar grips

Leather covered handlebar grips 2

Parts

Leather covered handlebar grips

Leather covered handlebars grips. Wrapped with a high quality leather, it gives a touch of chic to your motorcycle while keeping a good takeover. Available in aged brown, gold, black and ruby leather. Four thread stitchings colors available so it perfectly fits your bike. Available for ø25,4mm (1 inch) handlebars.

View

Aluminium handlebar grips for motocycles classic, vintage, cafe racer

Aluminium handlebar grips for motocycles classic, vintage, cafe racer 2

-40%

Parts

Motorcycle handlebar mounts, aluminum

€57.60 €96.00

Machined aluminium handlebar clamps for motorcycle. These risers are available in ø22mm diameter, ø28,6mm diameter or 1 inch (ø25,4mm) diameter, it's lighter and elegant. The clamps are satin black powder coat painted, and come with stainless steel screwing (size on the choice). Designed and manufactured at BAAK's workshop. Made in France

View

Classic headlight

Classic headlight 2

-15%

Parts

Classic headlight

€76.50 €90.00

Round headlight for classic motorcycles, with M8 side mount and ø180mm diameter. It features metal casing and bezel, with plastic glass, offering an exceptional level of finish. Its streamlined casing gives it a resolutely classic look. Depending on the motorcycle model chosen, a plug and play harness is supplied (which may justify a price difference...

View

Headlight bulb wiring extension

-15%

Parts

Headlight bulb wiring extension

€16.15 €19.00

This headlight wiring harness bulb extension suits any motorcycle equipped with a H4 lighthouse bulb. It enables to connect your headlight to the motorcycle when you relocate the original wiring harness. Length : 420mm This headlight bulb extension is manufactured by ourselves at BAAK Motocyclettes workshop. It comes by default with all our headlight for...

Resistors for LED turn indicators

-15%

Parts

Resistors for LED turn indicators

€12.75 €15.00

Resistors for LED motorcycles turn indicators, essential to get a correct blinking speed once your LED blinkers are mounted on a motorcycle that isn't equipped with LED ones in stock configuration. Comes in pairs. You need two pairs to connect both front and rear turn signals on your motorcycle.

Classic ø10 round aluminum motorcycle mirror

Classic ø10 round aluminum motorcycle mirror 2

-15%

Parts

Classic ø10 round aluminum motorcycle mirror

€54.40 €64.00

Classic round motorcycle mirror. This black mirror, Ø10cm / diameter, has an impeccable yet discreet finish. It offers perfect rearward visibility and fits any motorcycle. Height-adjustable thanks to 150mm articulated rod. Supplied with two adapters (left-hand and right-hand M10x1.25 mm). Additional adapters are available as options. Approved to European...

View

Motorcycle mirror under handlebars round ø8 in steel

Motorcycle mirror under handlebars round ø8 in steel 2

-15%

Parts

Motorcycle mirror under handlebars round ø8 in steel

€38.25 €45.00

Mini black Ø80mm bike mirror especially designed to be mounted below the handlebar in lower position. It offers a very discreet look and a good rear visibility with its wide angle glass. Available without adapter (for Ø8mm through shaft mounting or with adapter for ø22mm handlebars). Sold individually. Fit both left and right sides, available in satin...

View

Extension for Classic ø10 round motorcycle mirror in aluminium

Extension for Classic ø10 round motorcycle mirror in aluminium 2

-15%

Parts

Extension for Classic ø10 round motorcycle mirror in aluminium

€18.70 €22.00

Shaft extension for Classic round mirror. This extension is suitable only for our Classic round mirror. This part enables you make the mirror shaft longer for a better rear view, and makes it easier to adjust. This extension is 55mm long (35mm between holes). Supplied per unit.

1
2