Summer sales

Showing 1-171 of 171 item(s)

Aluminum battery tray for BMW Ninet

Aluminum battery tray for BMW Ninet 2

-20%

Bmw

Battery box for BMW NineT

€264.00 €330.00

Battery box for BMW NineT. This aluminum battery box is particularly useful to remove your original air box and keep your original battery. Designed and manufactured by our team in Lyon and then powder coated in stain black. It comes with all the necessary stainless steel hardware. It's designed to get a cleaner look on your motorcycle.

View

Corner supporter cover for BMW Ninet

Corner supporter cover for BMW Ninet 2

-20%

Bmw

Turn indicators holder cover for BMW NineT

€24.00 €30.00

Front turn indicators holder cover for BMW NineT. These black aluminium bracket covers are particularly useful to keep a clean finish if you replace the original front blinkers. Designed and manufactured in our Lyon workshop in aluminum and powder coated in black. Comes in pair with the necessary hardware for the assembly.

View

Starter cover for Moto Guzzi V7 / V9

Starter cover for Moto Guzzi V7 / V9 2

-20%

Moto Guzzi

Starter cover for Moto Guzzi V7 / V9

€44.00 €55.00

Starter cover for Moto Guzzi V7 and V9. Manufactured out of aluminium, this starter cover is easy to assemble over the original part. It's available in Satin black (powder coated) or Brushed aluminium. This part is suitable for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9. Designed and manufactured by our team in France.

Aluminium side covers for Triumph (2016-...)

Aluminium side covers for Triumph (2016-...) 2

-20%

Triumph

Classic aluminum side covers for Triumph (2016)

€60.00 €75.00

Classic side covers for liquid cooled Triumph (2016-...) designed and handcrafted in aluminum in our workshop in France. It replaces your original plastic side covers to bring a strongest look to your motorcycle, using noble material. Available for both left and right side. Comes with all the necessary stainless steel hardware. Available in Brushed or...

Aluminium side covers for Triumph (pre- 2016)

Aluminium side covers for Triumph (pre- 2016) 2

-20%

Triumph

Classic aluminum side covers for Triumph (pre- 2016)

€60.00 €75.00

Classic aluminum side covers for Triumph (before 2016 - air-cooled), available in Brushed or powder coated in Satin Black. It replaces your original plastic side covers. These parts will bring a strongest look to your motorcycle, using noble material while hiding the airbox. Comes with the necessary mounting bracket and hardware, available for right side...

Short fork spring blocks

Short fork spring blocks 2

-15%

Parts

Short fork spring blocks

€16.15 €19.00

Short fork spring blocks. To proportionally lower the front en of your Triumph or Moto Guzzi V7 when you fit our short shock absorbers, you will need these fork springs blocks. It's 2cm (25/32'') shorter and comes right in place of the original ones.

Headlight struts

Headlight struts 2

-20%

Parts

Headlight struts

€17.60 €22.00

Motorcycle headlight struts, manufactured out of aluminum, to perfectly adjust the position of your headlight. The hole diameter is ø8mm, the exterior diameter is ø29mm. For Moto Guzzi V7 Classic or Heritage headlight, choose the 10mm ones. For Triumph and Royal Enfield Classic or Heritage headlight, choose the 5mm ones. Comes in pairs.

Bates headlight bracket for Moto Guzzi V7 III / V7 850

Bates headlight bracket for Moto Guzzi V7 III / V7 850 2

-20%

V7 III (2017 -...)

Bates headlight bracket for Moto Guzzi V7 III / V7 850

€20.00 €25.00

Bates headlight fixation bracket for Moto Guzzi V7 III et V7 850, required to mount a lower fixation headlight (Bates style) on your motorcycle. Manufactured out of aluminium, 3mm thick, black powder coat painting. Available in black finish only. This bracket comes with all the necessary stainless steel screwing.

View

Batte headlight fixing for Moto Guzzi V9

Batte headlight fixing for Moto Guzzi V9 2

-20%

V9 (2016 -...)

Bates headlight bracket for Moto Guzzi V9

€20.00 €25.00

Bates headlight fixation bracket for Moto Guzzi V9, required to mount a lower fixation headlight (Bates style) on your motorcycle. Manufactured out of aluminium, 3mm thick, black powder coat painting. Available in black finish only. This is the bracket included in our Bates headlight kit for Moto Guzzi V9. This bracket comes with all the necessary...

Bates headlight bracket for Triumph Thruxton 1200 / Speed Twin

Bates headlight bracket for Triumph Thruxton 1200 / Speed Twin 2

-20%

Triumph

Bates headlight bracket for Triumph Thruxton 1200 / Speed Twin

€20.00 €25.00

Bates headlight fixation bracket for Triumph Thruxton 1200 and Speed Twin. This bracket fits the lower fork triple trees of the Thruxton 1200 / Speed Twin and enables you mount any Bates headlight with a lower fixation on your motorcycle. Distance between the fixation holes axis : 113mm. 4mm thick machined aluminium. Satin black powder coat painting.

Fixation de phare Bates tés de fourche large Triumph (2016-…)

Fixation de phare Bates tés de fourche large Triumph (2016-…) 2

-20%

Triumph

Bates headlight bracket for wide triple trees for Triumph (2016)

€20.00 €25.00

This Bates headlight fixation bracket fits the Triumph Bonneville T100 / T120 / Street Twin / Street Scrambler new generation (2016-...) equipped with our Wide fork triple yokes for Triumph. It's manufactured out of 4mm thick machined aluminium. Satin black powder coat painting.

Classic rear mudguard for BMW NineT

Classic rear mudguard for BMW NineT 2

-20%

Bmw

Classic rear mudguard for BMW NineT

€300.00 €375.00

Classic rear mudguard for BMW R 1200 NineT manufactured out of stainless steel. It has an elegant raw look thanks to the molded edge at its end. You will still keep good protection against the rear wheel projections. Equipped with a LED taillight (CE approved for road use) with license plate lightning, a rear license plate holder, rear turn indicators...

Universal Short rear mudguard

Universal Short rear mudguard 2

-20%

Universal

Universal Heritage rear mudguard

€312.00 €390.00

Heritage Universal rear mudguard manufactured out of stainless steel. It keeps a classic spirit, but more purified than most of original mudguards while keeping a good protection against the rear wheel projections. Equipped with a LED taillight (CE approved for road use) with integrated license plate lightning and a license plate holder.Made in France

Short rear mudguard for Triumph (2016 - …)

Short rear mudguard for Triumph (2016 - …) 2

-20%

Triumph

Heritage rear mudguard for Triumph (2016 )

€288.00 €360.00

Heritage rear mudguard for Triumph (2016 - liquid-cooled) manufactured out of stainless steel. It's shorter than your original mudguard, but it respect the original Triumph lines making it visually lighter, while keeping a good protection against the rear wheel projections. Equipped with a LED taillight (CE approved for road use) with integrated license...

Short rear mudguard for Triumph (pre- 2016)

Short rear mudguard for Triumph (pre- 2016) 2

-20%

Triumph

Heritage rear mudguard for Triumph (pre- 2016)

€288.00 €360.00

Heritage rear mudguard for Triumph (pre-2016 - air-cooled) manufactured out of stainless steel. It's shorter than your original Triumph rear mudguard, but it respects the original Triumph lines making it visually lighter, while keeping a good protection against the rear wheel projections. Equipped with a LED taillight (CE approved for road use) with...

Universal Classic Medium front mudguard

Universal Classic Medium front mudguard 2

-20%

Parts

Universal Classic Medium front mudguard

€91.20 €114.00

Universal Classic Medium front mudguard, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's not pre-drilled so you can fit it on any model of motorcycle. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black, brushed and ready to...

Classic Medium front mudguard for BMW NineT

Classic Medium front mudguard for BMW NineT 2

-20%

Bmw

Classic Medium front mudguard for BMW NineT

€228.00 €285.00

Classic Medium front mudguard for BMW NineT, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled, comes with its satin black powder coated fixation bracket suitable for the selected model and the stainless steel screws required. It's designed and manufactured by our team at the workshop in...

Classic Medium front mudguard for Moto Guzzi

Classic Medium front mudguard for Moto Guzzi 2

-20%

Moto Guzzi

Classic Medium front mudguard for Moto Guzzi

€96.00 €120.00

Classic Medium front mudguard for Moto Guzzi V7 I, V7 II, V7 III and V7 850, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled so it fits the original fixation system of your motorcycle. It's designed and manufactured by our team at the workshop in France. It's available in satin black,...

Classic Medium front mudguard for Triumph

Classic Medium front mudguard for Triumph 2

-20%

Triumph

Classic Medium front mudguard for Triumph

€96.00 €120.00

Classic Medium front mudguard for Triumph, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled so you can easily fit it on the Triumph model of your choice. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, brushed and ready to...

Universal Classic Mini front mudguard

Universal Classic Mini front mudguard 2

-20%

Parts

Universal Classic Mini front mudguard

€81.60 €102.00

Universal Classic Mini front mudguard, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's not pre-drilled so you can fit it on the motorcycle of your choice. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black, brushed and ready...

Classic Mini front mudguard for BMW NineT

Classic Mini front mudguard for BMW NineT 2

-20%

Bmw

Classic Mini front mudguard for BMW NineT

€228.00 €285.00

Classic Mini front mudguard for BMW R 1200 NineT, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled, comes with its satin black powder coated fixation bracket suitable for the selected model and the stainless steel screws required. It's designed and manufactured by our team at the...

Classic Mini front mudguard for Moto Guzzi

Classic Mini front mudguard for Moto Guzzi 2

-20%

Moto Guzzi

Classic Mini front mudguard for Moto Guzzi

€86.40 €108.00

Classic Mini front mudguard for Moto Guzzi V7 I, V7 II, V7 III and V7 850, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled so it fits the original fixation system of your motorcycle. It's designed and manufactured by our team at the workshop in France. It's available in satin black,...

Universal Medium front mudguard

Universal Medium front mudguard 2

-20%

Parts

Universal Medium front mudguard

€91.20 €114.00

Universal Medium front mudguard, manufactured out of stainless steel. It's short but it's still long enough to protect you from the front wheel splashes. It's not pre-drilled so you can fit it on any model of motorcycle. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black, brushed...

Medium front mudguard for BMW NineT

Medium front mudguard for BMW NineT 2

-20%

Bmw

Medium front mudguard for BMW NineT

€228.00 €285.00

Medium front mudguard for BMW R 1200 NineT, manufactured out of stainless steel. It's short but it's still long enough to protect you from the front wheel splashes. It's pre-drilled, comes with its satin black powder coated fixation bracket suitable for the selected model and the stainless steel screws required. It's designed and manufactured by our team...

Medium front mudguard for Moto Guzzi V7

Medium front mudguard for Moto Guzzi V7 2

-20%

Moto Guzzi

Medium front mudguard for Moto Guzzi V7

€132.00 €165.00

Medium front mudguard for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9, manufactured out of stainless steel. It's short but it's still long enough to protect you from the front wheel splashes. It's pre-drilled so it fits the original fixation system of your motorcycle. It's designed and manufactured by our team at the workshop in France. It's available...

Universal Mini front mudguard

Universal Mini front mudguard 2

-20%

Parts

Universal Mini front mudguard

€91.20 €114.00

Universal Mini front mudguard, manufactured out of stainless steel. This front fender is very short, it enables you visually lighten the front of your motorcycle. It's not pre-drilled so you can fit it on any model of motorcycle. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black,...

Mini front mudguard for BMW NineT

Mini front mudguard for BMW NineT 2

-20%

Bmw

Mini front mudguard for BMW NineT

€228.00 €285.00

Mini front mudguard for BMW R 1200 NineT, manufactured out of stainless steel. This front fender is very short, it enables you visually lighten the front of your NineT. It's pre-drilled, comes with its satin black powder coated fixation bracket suitable for the selected model and the stainless steel screws required. It's designed and manufactured by our...

Mini front mudguard for Moto Guzzi

Mini front mudguard for Moto Guzzi 2

-20%

Moto Guzzi

Mini front mudguard for Moto Guzzi

€132.00 €165.00

Mini front mudguard for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9, manufactured out of stainless steel. This front fender is very short, it enables you visually lighten the front of your motorcycle. It's pre-drilled so it fits the original fixation system of your motorcycle. It's designed and manufactured by our team at the workshop in France. It's...

Mini front mudguard for Triumph

Mini front mudguard for Triumph 2

-20%

Triumph

Mini front mudguard for Triumph

€132.00 €165.00

Mini front mudguard for Triumph, manufactured out of stainless steel. This front fender is very short, it enables you get a more compact look on the front end of your motorcycle. It's pre-drilled so you can easily fit it on your model of Triumph. It's designed and manufactured by our team at the workshop in France. It's available in satin black,...

Scrambler front mudguard for BMW NineT

Scrambler front mudguard for BMW NineT 2

-20%

Bmw

Scrambler front mudguard for BMW NineT

€228.00 €285.00

High front fender for BMW R NineT 1200. This Scrambler look front mudguard is handcrafted out of stainless steel, and gets assembled on the lower triple trees of your BMW NineT thanks to the provided fixation bracket. It offers a good protection and a strong off road look to your motorcycle. Available in Glossy black, Satin black, Brushed and Polished...

Scrambler high front mudguard for Triumph Bonneville, Thruxton and Scrambler (pre-2016)

Scrambler high front mudguard for Triumph Bonneville, Thruxton and Scrambler (pre-2016) 2

-20%

Triumph

Scrambler front mudguard for Triumph (pre-2016)

€228.00 €285.00

High front fender for Triumph (pre-2016 - air-cooled). This Scrambler look front mudguard is handcrafted out of stainless steel, and comes on the lower triple trees of your Triumph thanks to the provided black fixation bracket. It offers a good protection against the front wheel projections and a strong off road look to your motorcycle. Available in...

BAAK N°1 handlebars Ø25,4mm

BAAK N°1 handlebars Ø25,4mm 2

-20%

Parts

BAAK N°1 handlebars Ø25,4mm

€127.20 €159.00

Wide stainless steel BAAK N°1 handlebars in Ø25,4mm (1 inch). It's flatter, wider and has more pullback / sweep to the rider than most of the other handlebars. It will offer a very distinguished look to your motorcycle, and improve its handling qualities and your riding position. It's available in Satin black and Brushed finish. The stainless steel tubes...

Lowering kit for Triumph T100-T120 (2016)

Lowering kit for Triumph T100-T120 (2016) 2

-15%

Triumph

Lowering kit for Triumph T100-T120 (2016)

€1,071.00 €1,260.00

Aluminium upper triple trees kit for lowering, available for Triumph Bonneville T100 / T120 / Street Twin (2016-... - liquid-cooled). It includes the flat upper triple tree, the handlebar clamps, the ignition switch and / or speedometer bracket, and the short Big Body shock absorbers. This lowering kit was designed and manufactured at our workshop. We use...

Lowering kit for Triumph Thruxton 1200 / Speed Twin

Lowering kit for Triumph Thruxton 1200 / Speed Twin 2

-15%

Triumph

Lowering kit for Triumph Thruxton 1200 / Speed Twin

€943.50 €1,110.00

Aluminium upper triple trees kit for lowering, for Triumph Thruxton 1200 and Speed Twin (2016-...). This flat upper triple trees in machined aluminium has the same width as your original one but enables to lower the front end of your bike by 25mm without lifting up the fork tubes over the stock triple trees, for a perfect aesthetic result. Original...

Original turn indicators brackets kit for Triumph (2016)

Original turn indicators brackets kit for Triumph (2016) 2

-20%

Triumph

Original turn indicators brackets kit for Triumph (2016)

€24.00 €30.00

Turn signals brackets kit to relocate the factory or accessories indicators from Triumph that have keyed connection, to visually lighten your motorcycle. The front bracket comes on your oil-cooler, and the rear brackets come on the shock absorbers axles. These bracket kit comes without turn indicators.

Airbox removal kit for Triumph Bobber (2017)

Airbox removal kit for Triumph Bobber (2017) 2

-20%

Bonneville Bobber (2017 -...)

Airbox removal kit for Triumph Bobber (2017)

€180.00 €225.00

This airbox removal kit for Triumph Bonneville Bobber (2017-...) enables you replaced the original plastic airbox by an elegant leather protection part and two air filters and a crankcase breather. The air filters and breather are available in polished, satin black and brushed version. Appart from the aesthetic aspect, this modification leads to a slight...

Leather cable guides

Leather cable guides 2

-20%

Parts

Leather cable guides

€6.40 €8.00

Leather cable guide. This strap enables you fasten your cables, or tie it together to your handlebars. If just like us, your motorcycle's finish is part of your obsessions, this cable guide is perfect for your project. Available in Aged brown, Black and Gold leather. Available in 80mm, 90mm, 115mm or 130mm length. Each strap is 20mm wide. Sold as a...

Round mirror ø8 steel for motorcycle

Round mirror ø8 steel for motorcycle 2

-15%

Parts

Round mirror ø8 steel for motorcycle

€33.15 €39.00

Mini round mirror, Ø8cm diameter with M8 threading, for upper position. The mirror shaft is 13cm long, its shape was specifically designed to guaranty a good rear visibility and a discreet look. Suitable for motorcycles with M10 screwing original mirrors fixation. Sold by unit, available in satin black only. Fit both left and right sides.

Aluminium wheel arch for BMW R 1200 NineT by BAAK

Aluminium wheel arch for BMW R 1200 NineT by BAAK 2

-20%

Bmw

Aluminium wheel arch for BMW NineT

€100.00 €125.00

Aluminium wheel arch for BMW R 1200 NineT. This wheel arch enables you get a perfect finish result once your rear fender is removed. It's equipped with a LED taillight, it comes with its plug & play wiring harness for taillight, and its fixation kit. It's satin black powder coat painted so it can resist over the years. Suitable for BMW R NineT...

Front mudguard fixation brackets for Triumph (pre- 2016)

Front mudguard fixation brackets for Triumph (pre- 2016) 2

-20%

Triumph

Front mudguard fixation brackets for Triumph (pre- 2016)

€36.00 €45.00

These stainless steel mudguard fixation bracket enables you to assemble the front fender of your choice on your Triumph Bonneville, Scrambler and Thruxton (before 2016 - air-cooled). They allow to adjust the height of the mudguard, it gets assembled on the original mudguard fixation. Product delivered by pairs.Made in France

Front mudguard fixation brackets for Triumph (2016)

Front mudguard fixation brackets for Triumph (2016) 2

-20%

Triumph

Front mudguard fixation brackets for Triumph (2016)

€36.00 €45.00

Front mudguard fixation brackets for Triumph (2016-... - liquid-cooled) manufactured out of stainless steel. The fixation brackets enable you adjust the height of your front fender, while guiding the cables along the fork. It particularly useful if you change the diameter of your front wheel. Comes in pair, with stainless steel screws kit, without...

Headlight brackets for original headlight for Triumph (2016 )

Headlight brackets for original headlight for Triumph (2016 ) 2

-20%

Triumph

Headlight brackets for original headlight for Triumph (2016 )

€103.20 €129.00

Headlight fixation brackets for Triumph original headlight (since 2016). This pair of lighthouse brackets come to replace the original ones and reveal the fork tubes. Suitable for the Triumph T120 / T100 Street Scrambler / Street Twin / Thruxton 1200 (since 2016) original headlights. The optional turn indicators brackets enable mount on the headlight...

Bates headlight plate for BMW NineT

Bates headlight plate for BMW NineT 2

-20%

Bmw

Bates headlight plate for BMW NineT

€135.20 €169.00

Headlight plate for Bates headlight for BMW R NineT. This aluminium plate enables to hide the steering column and the cables after the assembly of a Bates headlight on your NineT. Handcrafted out of aluminium, it's available in Satin black or Raw aluminium finish. Compatible with a Bates headlight or the original headlight. The leather fixation collars...

Bates headlight plate for Triumph (pre-2016)

Bates headlight plate for Triumph (pre-2016) 2

-20%

Triumph

Bates headlight plate for Triumph (pre-2016)

€135.20 €169.00

Bates type headlight plate for Triumph (pre- 2016 - air-cooled). Essential to hide the steering column and all the cables after the mounting of a Bates headlight. Comes with 4 black leather clamps in black, aged brown, gold or ruby color. Available in satin black and raw aluminium finish. Measurements : 220mm x 190mm.

Tiny Motogadget speedo fixation bracket for Triumph (pre- 2016)

Tiny Motogadget speedo fixation bracket for Triumph (pre- 2016) 2

-20%

Triumph

Tiny Motogadget speedo fixation bracket for Triumph (pre- 2016)

€39.20 €49.00

Tiny Motogadget speedometer fixation bracket for Triumph (pre-2016). It's a machined aluminium bracket, satin black powder coated. This part comes with all the necessary screwing.

Aluminium handlebar grips for motocycles classic, vintage, cafe racer

Aluminium handlebar grips for motocycles classic, vintage, cafe racer 2

-20%

Parts

Motorcycle handlebar mounts, aluminum

€76.80 €96.00

Machined aluminium handlebar clamps for motorcycle. These risers are available in ø22mm diameter, ø28,6mm diameter or 1 inch (ø25,4mm) diameter, it's lighter and elegant. The clamps are satin black powder coat painted, and come with stainless steel screwing (size on the choice). Designed and manufactured at BAAK's workshop. Made in France

Motorcycle mirror under handlebars round ø8 in steel

Motorcycle mirror under handlebars round ø8 in steel 2

-15%

Parts

Motorcycle mirror under handlebars round ø8 in steel

€38.25 €45.00

Mini black Ø80mm bike mirror especially designed to be mounted below the handlebar in lower position. It offers a very discreet look and a good rear visibility with its wide angle glass. Available without adapter (for Ø8mm through shaft mounting or with adapter for ø22mm handlebars). Sold individually. Fit both left and right sides, available in satin...

Engine protection for Triumph (2016-…) Protect Your Bike in Style!

Engine protection for Triumph (2016-…) Protect Your Bike in Style! 2

-20%

Triumph

Engine protection for Triumph (2016)

€92.00 €115.00

This sump guard / engine protection is manufactured out of stainless steel. It will give a stronger look to Triumph (2016-... - liquid-cooled). It's 1,5mm thick, and ensures a good protection to your engine against impacts and front wheel splashes. Available in Satin black or Brushed finish. It comes with all the necessary stainless steel screwing kit.

Engine protection for Triumph (pre-2016)

Engine protection for Triumph (pre-2016) 2

-20%

Triumph

Engine protection for Triumph (pre-2016)

€92.00 €115.00

Aluminium engine protection / sump guard for Triumph (pre-2016 - air-cooled), gives an aesthetic style to your motorcycle and a better protection to your engine. Easy to assemble, comes with stainless steel screws. This skid plate is made by BAAK Motocyclettes team at our workshop in France. We use it on most of our Triumph custom projects. Width : 170mm

Side leather saddlebag for Triumph (2016-...) : Elegance and Style

Side leather saddlebag for Triumph (2016-...) : Elegance and Style 2

-15%

Triumph

Side leather saddlebag for Triumph (2016)

€232.05 €273.00

Side leather saddlebag for Triumph (2016-...). This saddlebag is handcrafted at our workshop in the same leather as our seats. It enables you to transport some stuff and gives a retro distinguished look to your bike. It's available in Aged brown, gold, black leather. Saddlebag measurements: 20cm x 20cm x 7cm. It comes mounting on a Brushed or Satin black...

Side leather saddlebag for Triumph (pre- 2016)

Side leather saddlebag for Triumph (pre- 2016) 2

-15%

Triumph

Side leather saddlebag for Triumph (pre- 2016)

€232.05 €273.00

Side leather saddlebag for Triumph (pre-2016 - air-cooled). This saddlebag is handcrafted in our workshop in the same leather as our seats. It enables you to transport some stuff and gives a retro distinguished look to your bike. It's available in Aged brown, gold, black leather. It comes mounting on a black satin painted aluminium plate that comes in...

Leather gas tank strap for Royal Enfield

Leather gas tank strap for Royal Enfield 2

-20%

Royal Enfield

Leather gas tank strap for Royal Enfield

€108.00 €135.00

Leather gas tank strap / belt for Royal Enfield Bullet and Classic 500 (Euro IV and pre-Euro IV), Continental GT 535 and Interceptor / Continental GT 650. It gives a distinguished classic look to your motorcycle and protects your gas tank from scratches. The hole around the gas tank cap will be different depending on the model of motorcycle you choose....

Universal gas tank leather belt

Universal gas tank leather belt 2

-20%

Parts

Universal gas tank leather belt

€100.80 €126.00

Universal leather gas tank strap / belt, fits with any gas tank with the cap on the side. It gives a distinguished look to your motorcycle tank and protects it from scratches. It comes wrapping your gas tank, is easy to assemble and is adjustable thanks to a metal buckle fastener. Maximum length 190cm, minimum length 107cm. This genuine leather tank...

Gas tank leather belt for Moto Guzzi V7I / II

Gas tank leather belt for Moto Guzzi V7I / II 2

-20%

Moto Guzzi

Gas tank leather belt for Moto Guzzi V7I / II

€115.20 €144.00

Leather gas tank strap / belt for Moto Guzzi V7 I and V7 II. It enables to wrap your gas tank and to give it a distinguished look. It's available in black, aged brown and gold leather colors so it perfectly suits your motorcycle. The straps get easily assembled on the gas tank cap thanks to two aluminium brackets. An adjustable nylon belt enables you to...

Rear turn indicators brackets for Moto Guzzi

Rear turn indicators brackets for Moto Guzzi 2

-20%

Moto Guzzi

Rear turn indicators brackets for Moto Guzzi

€24.00 €30.00

Rear turn signals bracket for Moto Guzzi. Enables you to mount your blinkers / indicators on the upper shock absorber axles for a more discreet look. Comes in pairs. This part is available for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9.

Rear turn indicators brackets for Triumph

Rear turn indicators brackets for Triumph 2

-20%

Triumph

Rear turn indicators brackets for Triumph

€24.00 €30.00

Rear turn signals bracket for Triumph. Enables you to mount your turn signals on the upper shock absorber axles for a more discreet look. Compatible with the original passenger grab handle. Make sure to select the right model of motorcycle so you can receive brackets suitable for your motorcycle. Comes in pairs. Length: 50mm.

Rear turn indicators brackets for Triumph (pre- 2016)

Rear turn indicators brackets for Triumph (pre- 2016) 2

-20%

Triumph

Rear turn indicators brackets for Triumph (pre- 2016)

€24.00 €30.00

Rear turn indicators support for Triumph (pre-2016 - air-cooled). Simple, effective and very discreet. It's manufactured out of stainless steel, laser cut (3mm thick) and satin black powder coat painted. It fits with any rear fender. Delivered without turn signals. This part isn't suitable for the original (or accessory) passenger grab bar.

View

Front turn indicators bracket for Moto Guzzi V7 / V9

Front turn indicators bracket for Moto Guzzi V7 / V9 2

-20%

Moto Guzzi

Front turn indicators bracket for Moto Guzzi V7 / V9

€24.00 €30.00

Front turn indicators fixation bracket for Moto Guzzi V7 and V9, simple, effective and very discreet. It's stainless steel laser cut and satin black powder coat painted. It gets assembled on the upper regulator screw of your motorcycle. Sold without blinkers.

Front turn indicators bracket for Triumph

Front turn indicators bracket for Triumph 2

-20%

Triumph

Front turn indicators bracket for Triumph

€24.00 €30.00

Front turn indicators bracket / support for Triumph is simple, effective and very discreet. It enables you relocate your turn indicators under the steering column. It's stainless steel laser cut and satin black powder coated. It's particularly suitable for our Rectifier bracket for Triumph, or can be tightened on the upper fixation of the oil cooling...

Side speedometer holder for Triumph Street Twin / Street Scrambler

Side speedometer holder for Triumph Street Twin / Street Scrambler 2

-20%

Parts

Side speedometer holder for Triumph Street Twin / Street Scrambler

€71.20 €89.00

Side speedometer holder for Triumph Street Twin / speed Twin 900 / Street Scrambler. This part enables you to relocate your speedometer on the right or left of the ignition switch to visually lighten the front of your motorcycle. It mounts on the left or right fork tube.

Relocated ignition switch control bracket for Triumph (2016)

Relocated ignition switch control bracket for Triumph (2016) 2

-20%

Triumph

Relocated ignition switch control bracket for Triumph (2016)

€24.00 €30.00

Ignition switch control relocation bracket for Triumph (2016-... - liquid-cooled). It enables to relocate the ignition switch control under the gas tank. Manufactured in inox laser cut. You'll be obliged to relocate your wiring harness under your gas tank. Comes with all the necessary stainless steel screwing. The relocation of your ignition switch...

Relocated ignition switch control bracket kit for Triumph (pre- 2016)

Relocated ignition switch control bracket kit for Triumph (pre- 2016) 2

-20%

Triumph

Relocated ignition switch control bracket kit for Triumph (pre- 2016)

€39.20 €49.00

Relocated ignition switch control bracket for Triumph (pre-2016 - air-cooled). This simple ignition switch support enables you to relocate the ignition control between the fuel tank and the left carburetor. Fits on the right side on the injection models (EFI). It requires to move the wiring harness that is in your headlight, under the gas tank, without...

Bates headlight bracket

Bates headlight bracket 2

-20%

Parts

Bates headlight bracket

€24.00 €30.00

Fixation bracket for Bates headlight, required to assemble a headlight with a lower position fixation on your motorcycle. Manufactured out of aluminium, 4mm thick, black powder coat painted. Ø6mm between axes holes, adjustable from 68mm to 95mm Ø10mm headlight fixing holes

Universal rear plate / fire support I BAAK

Universal rear plate / fire support I BAAK 2

-20%

Universal

Universal license plate holder / taillight

€67.20 €84.00

Universal license plate holder / taillight unit, with integrated license plate lightning, mounted on a universal plate holder. Distance between centers of the mounting holes: 45mm (M5 holes). Supplied with the necessary stainless hardware. You can fit this taillight / license plate holder on any rear mudguard. Light dimension : Diameter 70mm / Depth 50mm.

Side license plate holder for Moto Guzzi

Side license plate holder for Moto Guzzi 2

-20%

Moto Guzzi

Side license plate holder for Moto Guzzi

€76.00 €95.00

License plate support / holder for Moto Guzzi. This part gets attached on the left upper shock absorber axis. It comes with a plug & play wiring harness. This support is satin black powder coat painted. If you choose the optional turn indicators, we'll provide the wiring harness and potential resistors necessary for their proper functioning according...

Side license plate holder for Royal Enfield Classic / Bullet

Side license plate holder for Royal Enfield Classic / Bullet 2

-20%

Bullet / Classic (2008- ..)

Side license plate holder for Royal Enfield Classic / Bullet

€134.40 €168.00

Side license plate holder for Royal Enfield Bullet and Classic 500. It comes with its taillight and integrated license plate lightning, and gets assembled on the upper left shock absorber axle to visually lighten the tail of your bike. This holder comes with a plug & play wiring harness so you can assemble it easily on your Royal Enfield.

View

Side license plate holder for Triumph

Side license plate holder for Triumph 2

-20%

Triumph

Side license plate holder for Triumph

€76.00 €95.00

Side license plate support / holder for Triumph. It attaches to the upper axis of the left shock absorber. It comes with a connection wiring harness that makes it 100% plug and play. Satin black powder coat painting finish. If you choose the optional turn indicators, we'll provide the potential resistors necessary for their proper functioning according to...

License plate holder for Triumph original mudguard (pre- 2016)

License plate holder for Triumph original mudguard (pre- 2016) 2

-20%

Triumph

License plate holder for Triumph original mudguard (pre- 2016)

€134.40 €168.00

License plate holder for Triumph original mudguard (pre-2016 - air-cooled). This license plate support includes a taillight (EU approved), an integrated license plate lightning, a plug & play wiring harness, turn indicators fixation bracket on choice and optional turn indicators. Designed and manufactured at our workshop in France.

License plate holder for Triumph Bobber original mudguard (2017)

License plate holder for Triumph Bobber original mudguard (2017) 2

-20%

Bonneville Bobber (2017 -...)

License plate holder for Triumph Bobber original mudguard (2017)

€144.00 €180.00

License plate holder for the original mudguard of the Triumph Bonneville Bobber (2017-...). This taillight / license plate support unit comes in place of the original part. It's equipped with an EU approved LED vintage taillight with LED integrated license plate lightning, a license plate triangle, a plug & play wiring harness, optional turn...

License plate holder for Moto Guzzi V9 original mudguard

License plate holder for Moto Guzzi V9 original mudguard 2

-20%

V9 (2016 -...)

License plate holder for Moto Guzzi V9 original mudguard

€134.40 €168.00

License plate holder for Moto Guzzi V9 original rear mudguard. This satin black powder coat painted part comes in place of your original taillight unit. It is composed of a license plate holder, a round LED taillight (EU approved)with plate lightning, a pair of turn indicators brackets on choice, a plug & play wiring harness and optional turn...

License plate holder for Royal Enfield Classic / Bullet original mudguard

License plate holder for Royal Enfield Classic / Bullet original mudguard 2

-20%

Bullet / Classic (2008- ..)

License plate holder for Royal Enfield Classic / Bullet original mudguard

€134.40 €168.00

Discreet license plate holder for Royal Enfield Classic / Bullet 500 original mudguard. It's equipped with a ø70mm EU approved taillight with integrated license plate lightning, a plug & play wiring harness, turn indicators brackets on choice and optional turn indicators. This part comes in place of your original taillight / license plate holder unit....

Rectifier / turn indicators / horn bracket for Triumph (pre- 2016)

Rectifier / turn indicators / horn bracket for Triumph (pre- 2016) 2

-20%

Triumph

Rectifier / turn indicators / horn bracket for Triumph (pre- 2016)

€39.20 €49.00

This bracket enables you to relocate your rectifier, front turn indicators and horn on a Triumph (pre-2016 - air-cooled) below your steering column. It visually lightens the line of the front of your motorcycle by grouping these parts on one bracket. This bracket is 21,8cm wide and 12cm high. It get assembled in the original place of your horn, under the...

Rectifier bracket for Triumph (2016)

Rectifier bracket for Triumph (2016) 2

-20%

Triumph

Rectifier bracket for Triumph (2016)

€36.00 €45.00

Rectifier bracket for Triumph (2016-... - liquid-cooled). This bracket enables you to relocate your rectifier behind your engine oil cooler instead of the lower fork trees to lighten the front of your bike. Manufactured out of stainless steel laser cut. You'll be obliged to relocate your wiring harness under your gas tank. Comes with all the necessary...

Rectifier bracket for Triumph (pre- 2016)

Rectifier bracket for Triumph (pre- 2016) 2

-20%

Triumph

Rectifier bracket for Triumph (pre- 2016)

€24.00 €30.00

Rectifier relocation bracket for Triumph (pre-2016 - air-cooled). This bracket enables you to relocate the voltage rectifier, in place of the horn. Then the horn can be attached below, on the same bracket. It's manufactured out of aluminum laser cut. You may be obliged to move the original wiring harness under the gas tank. All the necessary screwing...

License plate holder triangle for Triumph Thruxton / Speed Twin 1200

License plate holder triangle for Triumph Thruxton / Speed Twin 1200 2

-20%

Thruxton 1200 (2016 -...)

License plate holder triangle for Triumph Thruxton / Speed Twin 1200

€44.00 €55.00

License plate holder triangle for rear fender eliminator kit of Triumph Thruxton 1200 or Speed Twin 1200 (2016-...). This support is dedicated to be assembled on the optional Rear fender removal kit offered by Triumph Motorcycles, or stands for a Short license plate holder for original rear fender on a Speed Twin. It enables you to remove the reflectors...

High Scrambler front mudguard for Moto Guzzi V7I and V7II

High Scrambler front mudguard for Moto Guzzi V7I and V7II 2

-20%

V7 I & V7 II (2007-2017)

Scrambler front mudguard for Moto Guzzi V7I / V7II

€228.00 €285.00

High front fender for Moto Guzzi V7I and V7II. This Scrambler look front mudguard is handcrafted out of stainless steel, and gets assembled on the lower triple trees of your V7 thanks to the provided black fixation bracket. It offers a good protection and a strong off road look to your motorcycle. Available in Glossy black, Satin black, Brushed and...

Bates headlight bracket for Royal Enfield 650 Interceptor / Continental GT

-20%

Interceptor / Continental GT 650

Bates headlight bracket for Royal Enfield 650 Interceptor / Continental GT

€20.00 €25.00

Bates headlight fixation bracket for Royal Enfield 650 Interceptor / Continental GT, required to mount a lower fixation headlight (Bates style) on your motorcycle. Manufactured out of aluminium, 3mm thick, black powder coat painting. Available in black finish only. This bracket comes with all the necessary stainless steel screwing.

Plate support for Royal Enfield 650 Interceptor / Continental GT

Plate support for Royal Enfield 650 Interceptor / Continental GT 2

-20%

Interceptor / Continental GT 650

License plate holder for Royal Enfield 650 Interceptor / Continental GT

€134.40 €168.00

License plate holder for original Royal Enfield 650 Interceptor / Continental GT mudguard. Equipped with a taillight (CE approved), license plate lightning, compatible wiring harness and included turn indicators brackets to be mounted on your upper shock absorber axles or the license plate holder on choice. The EU approved LED taillight comes with its...

Classic Medium front mudguard for Royal Enfield 650 Interceptor / Continental GT

Classic Medium front mudguard for Royal Enfield 650 Interceptor / Continental GT 2

-20%

Interceptor / Continental GT 650

Classic Medium front mudguard for Royal Enfield 650 Interceptor / Continental GT

€96.00 €120.00

Classic Medium front fender for Royal Enfield 650 Interceptor / Continental GT (2018-...), manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled so you can easily fit it on your motorcycle. This mudguard is available without or with risers kit (+10mm) if you want to mount a bigger tire on the...

Classic Mini front mudguard for Royal Enfield 650 Interceptor / Continental GT

Classic Mini front mudguard for Royal Enfield 650 Interceptor / Continental GT 2

-20%

Interceptor / Continental GT 650

Classic Mini front mudguard for Royal Enfield 650 Interceptor / Continental GT

€86.40 €108.00

Classic Mini front mudguard for Royal Enfield 650 Interceptor / Continental GT (2018-...), manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. We drill holes on this mudguard so it fits your motorcycle. This mudguard is available without or with risers kit (+10mm) if you want to mount a bigger tire on the...

Front mudguard risers kit for Royal Enfield 650 Interceptor / Continental GT

Front mudguard risers kit for Royal Enfield 650 Interceptor / Continental GT 2

-20%

Interceptor / Continental GT 650

Front mudguard risers kit for Royal Enfield 650 Interceptor / Continental GT

€26.40 €33.00

Risers kit for Royal Enfield 650 Interceptor / Continental GT front mudguard. This 4 screws and 4 aluminium struts enable you to lift up your front mudguard by 10mm if you plan to mount a wider and higher tire on your Royal Enfield 650 Interceptor / Continental GT. Suitable for your original mudguard. The struts must be mounted between your original...

Front turn indicators brackets Royal Enfield 650 Interceptor / Continental GT

Front turn indicators brackets Royal Enfield 650 Interceptor / Continental GT 2

-20%

Interceptor / Continental GT 650

Front turn indicators brackets for Royal Enfield 650 Interceptor / Continental GT

€24.00 €30.00

Front turn indicators brackets for Royal Enfield 650 Interceptor / Continental GT. Simple and very discreet, these brackets are satin black powder coat painted and enable you mount any universal turn indicator with a øM8 or øM10 fixation on your Royal Enfield. It gets assembled under your lower from triple trees. It comes in pairs, sold without turn...

Front mudguard risers kit for Royal Enfield Himalayan

Front mudguard risers kit for Royal Enfield Himalayan 2

-20%

Himalayan 400

Risers kit for Royal Enfield Himalayan front mudguard

€26.40 €33.00

Risers kit for Royal Enfield Himalayan. This 4 screws and 4 aluminium struts enable you to lift up your front mudguard by 10mm if you plan to mount a wider and higher tire on your Royal Enfield Himalayan. Suitable for your original mudguard. The struts must be mounted between your original front mudguard holder and the fork.Made in France

View

Classic rear mudguard for Royal Enfield 650 Interceptor / Continental GT

Classic rear mudguard for Royal Enfield 650 Interceptor / Continental GT 2

-20%

Interceptor / Continental GT 650

Classic rear mudguard for Royal Enfield 650 Interceptor / Continental GT

€240.00 €300.00

Classic rear mudguard for Royal Enfield 650 Interceptor / Continental GT, manufactured out of stainless steel at our workshop in France. Shorter than your original rear mudguard, it has an elegant raw look thanks to the molded edge at its end. You will still keep good protection against the rear wheel projections. Equipped with a LED taillight (CE...

Handlebar clamps for Royal Enfield 650 Interceptor / Continental GT

Handlebar clamps for Royal Enfield 650 Interceptor / Continental GT 2

-20%

Interceptor / Continental GT 650

Handlebar clamps for Royal Enfield 650 Interceptor / Continental GT

€76.80 €96.00

Machined aluminium handlebar clamps for Royal Enfield 650 Interceptor / Continental GT. These risers are available in ø22mm diameter, ø28,6mm diameter or 1 inch (ø25,4mm) diameter, it's lighter and elegant. The clamps are satin black powder coat painted, and come with all the stainless steel screwing kit compatible with your motorcycle. Designed and...

Engine protection for Royal Enfield 650 Interceptor / Continental GT

Engine protection for Royal Enfield 650 Interceptor / Continental GT 2

-20%

Interceptor / Continental GT 650

Engine protection for Royal Enfield 650 Interceptor / Continental GT

€92.00 €115.00

Engine protection / sump guard for Royal Enfield 650 Interceptor / Continental GT (2018-...). It will give a stronger look to Royal Enfield while protection the bottom of your engine against impacts and front wheels splashes. It's manufactured out of 1,5mm thick stainless steel. Available in Satin black or Brushed finish. It comes with all the necessary...

Classic Medium front mudguard for Triumph Bobber

Classic Medium front mudguard for Triumph Bobber 2

-20%

Bonneville Bobber (2017 -...)

Classic Medium front mudguard for Triumph Bobber

€168.00 €210.00

Classic Medium front mudguard for Triumph Bonneville Bobber (2017-...), manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled and comes with its mudguard fixation brackets so it can be easily fitted on your Triumph Bobber. This front fender isn't suitable for Triumph Bobber Black, Bobber TFC...

Classic mini front mudguard for Triumph Bobber

Classic mini front mudguard for Triumph Bobber 2

-20%

Bonneville Bobber (2017 -...)

Classic mini front mudguard for Triumph Bobber

€168.00 €210.00

Classic Mini front mudguard for Triumph Bonneville Bobber (2017-...), manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled and comes with its fixation brackets so it can be easily fitted on your Triumph Bobber. This front fender isn't compatible with the models Bobber Black, Bobber TFC and...

Mini front mudguard for Triumph Bobber

Mini front mudguard for Triumph Bobber 2

-20%

Bonneville Bobber (2017 -...)

Mini front mudguard for Triumph Bobber

€168.00 €210.00

Mini front mudguard for Triumph Bonneville Bobber (2017-...), manufactured out of stainless steel. This front fender is very short, it enables you get a more compact look on the front end of your motorcycle. It's pre-drilled and comes with its fixation bracket so it can be easily fitted on your Triumph Bobber. This front fender isn't suitable for the...

Royal Enfield - interceptor - side covers - black

Royal Enfield - interceptor - side covers - black 2

-20%

Interceptor / Continental GT 650

Side covers for Royal Enfield 650 Interceptor / Continental GT

€60.00 €75.00

Aluminium side covers for Royal Enfield 650 Interceptor / Continental GT. These aluminium side covers are designed and manufactured by our craftsmen at the workshop. It comes in place of the original plastic side panels of your Interceptor or Continental GT 650, and will highly improve its finish level. Available for Left or right side, comes with all...

Side leather saddlebag for Royal Enfield 650 Interceptor / Continental GT

Side leather saddlebag for Royal Enfield 650 Interceptor / Continental GT 2

-15%

Interceptor / Continental GT 650

Side leather saddlebag for Royal Enfield 650 Interceptor / Continental GT

€232.05 €273.00

Side leather saddlebag for Royal Enfield 650 Interceptor / Continental GT (2018-...). This saddlebag is handcrafted at our workshop in the same leather as our seats. It enables you to transport some stuff and gives a retro distinguished look to your Royal Enfield. It's available in Aged brown, gold, black leather. Saddlebag measurements: 20cm x 20cm x...

Aluminium intake cover for Triumph 900 (2016-...)

Aluminium intake cover for Triumph 900 (2016-...) 2

-20%

Triumph

Intake covers for Triumph 900 (2016)

€52.00 €65.00

Pair of aluminium intake covers for Triumph (2016-...). These covers come in place of the original ones to give a better aesthetic look to your motorcycle. It's suitable for Triumph Street Twin / Street Cup and Bonneville T100 (2016-...). It comes by pair. It's available in Satin black and Brushed finish. It comes with all the necessary mounting...

Leather gas tank belt for Moto Guzzi V9 and V7III

Leather gas tank belt for Moto Guzzi V9 and V7III 2

-20%

Moto Guzzi

Leather gas tank strap for Moto Guzzi V7III / V7 850 / V9

€108.00 €135.00

Leather gas tank strap / belt for Moto Guzzi V7 III, V7 850 and V9. This strap enables you wrap your gas tank and give it a classy look. It's easy to assemble and as it simply wraps the gas tank and gets adjusted using the adjustment buckle on the nylon strap. Make sure to correctly choose your model of motorcycle so it perfectly fits. It's available in...

Speedometer lowering kit for BMW NineT

Speedometer lowering kit for BMW NineT 2

-20%

Bmw

Speedometer lowering kit for BMW NineT

€17.60 €22.00

Lowering kit for BMW NineT speedometer. These 4 struts enable you lower your original NineT speedometer by 10mm, to get a clear riding post. Suitable for BMW NineT Pure, Scrambler, Racer and Urban GS.

High Scrambler front mudguard for Triumph (2016-...) by BAAK

High Scrambler front mudguard for Triumph (2016-...) by BAAK 2

-20%

Triumph

Scrambler front mudguard for Triumph (2016)

€228.00 €285.00

High front fender for Triumph (2016-... - liquid-cooled). This high Scrambler look front mudguard is handcrafted out of stainless steel, and comes on the lower triple trees of your Triumph thanks to the provided black fixation bracket. It offers a good protection against the front wheel projections and a strong off road look to your motorcycle....

Headlight plate for Bates Headlight for Triumph (2016-...)

Headlight plate for Bates Headlight for Triumph (2016-...) 2

-20%

Triumph

Bates headlight plate for Triumph (2016)

€135.20 €169.00

Bates headlight plate for Triumph (since 2016 - liquid-cooled). This aluminium plate comes to hide the steering column and cables running around after you mounted a Bates headlight (with lower fixation) on your Triumph. The 4 leather collars (brown, black, gold or ruby color) attach the plate to your fork tubes. Available in Satin black or Brushed...

Side leather saddlebag for Triumph Thruxton 1200 and Speed Twin

Side leather saddlebag for Triumph Thruxton 1200 and Speed Twin 2

-15%

Speed Twin 1200 (2019 -...)

Side leather saddlebag for Triumph Thruxton 1200 / Speed Twin (2016)

€232.05 €273.00

Side leather saddlebag for Triumph Thruxton 1200 / Thruxton R / Speed Twin (2016-...). This side bag is handcrafted at our workshop using the same leather as on our seats. It enables you transport some stuff and gives a retro distinguished look to your Triumph. It's available in Aged brown, gold, black leather. Saddlebag measurements: 20cm x 20cm x 7cm....

Bates headlight plate with leather collars for Royal Enfield Interceptor / Continental GT 650

Bates headlight plate with leather collars for Royal Enfield Interceptor / Continental GT 650 2

-20%

Interceptor / Continental GT 650

Bates headlight plate for Royal Enfield 650 Interceptor / Continental GT

€132.00 €165.00

Bates headlight plate for Royal Enfield 650 Interceptor / Continental GT (2018-...). Attention, this part is only compatible with our Flat triple trees kit, it requires to move the ignition switch under the gas tank. Manufactured out of aluminium, this plate comes to hide the steering column and cables left visible after the assembly of a Bates...

Relocated ignition switch bracket for Royal Enfield 650 Interceptor / Continental GT

Relocated ignition switch bracket for Royal Enfield 650 Interceptor / Continental GT 2

-20%

Interceptor / Continental GT 650

Relocated ignition switch bracket for Royal Enfield 650 Interceptor / Continental GT

€31.20 €39.00

Ignition switch relocation kit for Royal Enfield 650 Interceptor / Continental GT (2018-...). this kit is necessary to relocate the ignition switch from its original position to under your injection system, on the right side of your Royal Enfield. It includes an inox bracket and the wiring harness extension. The relocation of your ignition switch...

Side license plate holder for Royal Enfield 650 Interceptor / Continental GT

Side license plate holder for Royal Enfield 650 Interceptor / Continental GT 2

-20%

Interceptor / Continental GT 650

Side license plate holder for Royal Enfield 650 Interceptor / Continental GT

€134.40 €168.00

This side license plate holder for Royal Enfield 650 Interceptor / Continental GT (2018-...) is designed to be mounted on your passenger footrest. It will let you clean the rear end of your motorcycle by re-locating the license plate. It comes with an EU approved taillight with integrated license plate lightning. It comes with a plug & play wiring...

View

Aluminium turn indicators holders for license plate

Aluminium turn indicators holders for license plate 2

-20%

Parts

Turn indicators holders on license plate

€24.00 €30.00

These aluminium turn indicators holders are designed to be assembled on a BAAK license plate holder, on the motorcycle of your choice. It's available in 3 different versions : For turn indicators with øM8 shafts For turn indicators with øM10 shafts For original / accessory Triumph turn indicators (2016-...) It comes with the necessary stainless steel...

BAAK black aluminium headlight brackets for motorcycles

BAAK black aluminium headlight brackets for motorcycles 2

-20%

Parts

Universal short headlight clamps for classic motorcycles

€103.20 €129.00

Headlight bracket for motorcycles, for M8 side headlight fixation, with optional front turn indicators holders. Designed and manufactured at BAAK's in France. Perfect to put a BAAK headlight on your motorcycle and improve its finish level. Ø39 - 40mm for Moto Guzzi V7I / V7 II / V7 III / V7 850 / V9 (60mm size) Ø41 - 42mm for Triumph Bonneville T100 / SE...

Classic Mini front mudguard for Triumph

Classic Mini front mudguard for Triumph 2

-20%

Triumph

Classic Mini front mudguard for Triumph

€86.40 €108.00

Classic Mini front mudguard for Triumph, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. We drill holes on this mudguard according to the model of Triumph you choose. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black, brushed and...

Airbox removal kit for Triumph T120 (2016)

Airbox removal kit for Triumph T120 (2016) 2

-20%

Bonneville T120 (2016 -...)

Airbox removal kit for Triumph T120 (2016)

€224.00 €280.00

Airbox removal kit for Triumph Bonneville T120 (2016-...). This kit enables you to visually lighten the line of your motorcycle and make it breathe better. This kit includes: The aluminium battery box (Satin black only) A pair of "camembert" air filters A pair of aluminium side covers (Satin black or Brushed) with or without saddlebag(s) All the...

Scrambler front mudguard for Royal Enfield 650 Interceptor / Continental GT

Scrambler front mudguard for Royal Enfield 650 Interceptor / Continental GT 2

-20%

Interceptor / Continental GT 650

Scrambler front mudguard for Royal Enfield 650 Interceptor / Continental GT

€228.00 €285.00

High front mudguard for Royal Enfield 650 Interceptor / Continental GT (2018-...). This Scrambler stainless steel front fender gets assembled in high position on your motorcycle lower triple tree thanks to our specific bracket. It offers a good protection and a perfect off road look. It's available in 5 different finishes (Brushed, Glossy black, Satin...

Gallinella rear fairing rear for Royal Enfield 650 Interceptor / Continental GT

Gallinella rear fairing rear for Royal Enfield 650 Interceptor / Continental GT 2

-20%

Royal Enfield

Gallinella fairing kit for Royal Enfield 650 Interceptor / Continental GT

€999.99 €1,249.99

Gallinella rear fairing kit for Royal Enfield 650 Interceptor / Continental GT (2018-...). Turn this kit into the masterpiece of your custom project and make your Royal Enfield stand out from the mass. This kit includes: Screwed short subframe with cutting template Short leather seat Gallinella fiber fairing License plate holder, taillight (trim ring...

Rear turn indicators brackets for Royal Enfield by BAAK

Rear turn indicators brackets for Royal Enfield by BAAK 2

-20%

Royal Enfield

Rear turn indicators brackets for Royal Enfield

€24.00 €30.00

Rear turn indicators holders for Royal Enfield. This pair of aluminium brackets will let you mount your turn indicators on the upper shock absorbers axles so it remains discreet. It's satin black high quality powder-coated so it resists over the years. Make sure to select the right model of motorcycle so you receive the holders that are suitable for your...

Aluminium intake cover for Royal Enfield 650 Interceptor / Continental GT

Aluminium intake cover for Royal Enfield 650 Interceptor / Continental GT 2

-20%

Interceptor / Continental GT 650

Aluminium intake covers for Royal Enfield 650 Interceptor / Continental GT

€52.00 €65.00

Pair of aluminium intake covers for Royal Enfield 650. These covers come in place of the original ones to give a better aesthetic look to your motorcycle. It comes by pair. It's available in Satin black and Brushed finish. It comes with all the necessary mounting hardware.

Reinforced aluminium engine protection for Royal Enfield 650 Interceptor and Continental GT

Reinforced aluminium engine protection for Royal Enfield 650 Interceptor and Continental GT 2

-20%

Interceptor / Continental GT 650

Trail engine protection for Royal Enfield 650 Interceptor / Continental GT

€100.00 €125.00

Aluminium engine protection for Royal Enfield 650 Interceptor / Continental GT (2018-...). In addition to offering your Royal Enfield an adventurer look, this sump guard provides a real protection to your motorcycle in any situation. His 4mm thick aluminium structure is a bulwark against the terrain bumps that could his your engine block. Very easy to...

Replacement air filters for Triumph Bobber 1200 Airbox removal kit

Replacement air filters for Triumph Bobber 1200 Airbox removal kit 2

-20%

Bonneville Bobber (2017 -...)

Spare air filters for Triumph Bobber 1200 airbox removal kit

€55.20 €69.00

This pack of spare air filters is suitable for our Airbox removal kit for Triumph Bobber 1200 (2017-...). It's composed of two air filters available in Brushed, polished and satin black. The air filters replacement routine on your motorcycle depends on how you use it along the year.

License plate holder for US format side license plates

License plate holder for US format side license plates 2

-20%

Parts

License plate holder for US format side license plates

€36.00 €45.00

This license plate holder is suitable for US size license plates (vertical) mounted in side position. It's manufactured out of 3mm thick aluminium and it's satin black powder coat painted. This part is only suitable for BAAK side license plate holders.

View

Fork spring blocks for Triumph Street Scrambler (2016)

Fork spring blocks for Triumph Street Scrambler (2016) 2

-15%

Street / Speed Twin 900 (2016 -...)

Fork spring blocks for Triumph Street Scrambler (2016)

€16.15 €19.00

This pair of stainless steel fork spring blocks let you rise the front of your Triumph Street Scrambler (2016-...) by 10mm, particularly if you choose longer shock absorbers for your machine. These blocks simply come on top of your original fork springs.

Mini Classic low front mudguard for Royal Enfield 650

Mini Classic low front mudguard for Royal Enfield 650 2

-20%

Front end & chassis

Mini Classic low front mudguard for Royal Enfield 650

€228.00 €285.00

This Mini Classic low front mudguard for 17'' wheel for Interceptor / GT 650 support will allow you to put a mudguard as close as possible to your 17-inch front wheel. We have designed this bracket to adapt to the new height of your front wheel and visually lower the look of your Royal Enfield. The Roadster look at your fingertips ... Made in France

Airbox removal kit for Royal Enfield Interceptor / Continental GT 650

Airbox removal kit for Royal Enfield Interceptor / Continental GT 650 2

-20%

Products

Airbox removal kit for Royal Enfield Interceptor / Continental GT 650

€396.00 €495.00

Give your bike a Roadster look by freeing up the space where the original airbox of your Royal Enfield Interceptor or GT use to be by replacing it with 2 air filters, a sniffer and a pair of shiny black mini side panels. This kit will create a hollow space and will visually lighten the bike. The air filters will no longer be hidden, their function is...

Land Rover Defender Fender vents

Land Rover Defender Fender vents 2

-20%

Parts

Land Rover Defender Fender vents

€88.00 €110.00

The devil is in the details and this exactly why we’ve decide to add these beautiful metal fender vents to our new line of parts for Land Rover Defender. These are beautiful upgrades over the factory plastic vents. Both the Design and R&D departments worked jointly on this line of parts so Defender’s owner can personalized their beloved vehicle to...

View

Système anti-vibration Bullet 500

Système anti-vibration Bullet 500 2

-20%

Home

Système anti-vibration Bullet 500

€86.55 €108.19

Bullet 500 anti-vibration system: this crankshaft plate, located behind the ignition flywheel, reduces engine vibrations by 50%.

BAAK | Trail engine protection for Triumph T100/T120.

BAAK | Trail engine protection for Triumph T100/T120. 2

-20%

Parts

Trail engine protection for Triumph T100/T120

€116.00 €145.00

Aluminium engine protection for Triumph T100/T120 (2016-…) with an adventurer look and for the best protection.

View

License plate holder for US format with rear light mount

License plate holder for US format with rear light mount 2

-20%

Parts

License plate holder for US format with rear light mount

€36.00 €45.00

This plate holder is suitable for US format license plates (horizontal 170x100mm). It is made of 3mm-thick aluminum, painted with satin black epoxy paint. This plate holder is to be purchased in addition to the original fender plate holder in order to convert it to fit US plates. Made in France

View

License plate holder for US format

License plate holder for US format 2

-20%

Universal

License plate holder for US format

€36.00 €45.00

This license plate holder is suitable for US size license plates (horizontal). It's manufactured out of 3mm thick aluminium and it's satin black powder coat painted. This part is only suitable for BAAK license plate holders.

License plate holder for US format with light mount

License plate holder for US format with light mount 2

-20%

Parts

License plate holder for US format with light mount

€36.00 €45.00

This license plate holder is suitable for US size license plates (horizontal). It's manufactured out of 3mm thick aluminium and it's satin black powder coat painted. This support allows you to mount a license plate light. This part is only suitable for BAAK license plate holders.

Rear mudguard for Bobber 1200

Rear mudguard for Bobber 1200 2

-20%

Triumph

Rear mudguard for Bobber 1200 Triumph

€396.00 €495.00

Rear mudguard for Bobber 1200 manufactured out of stainless steel. Shorter than your original rear mudguard, it has an elegant raw look thanks to the molded edge at its end. You will still keep good protection against the rear wheel projections.Made in France

Front-turn-indicators-bracket-Triumph-Bobber-1200

Front-turn-indicators-bracket-Triumph-Bobber-1200 2

-20%

Parts

Front turn indicators bracket for Triumph Bobber 1200

€20.00 €25.00

Turn signals brackets kit to relocate the indicators Triumph Bobber 1200 to visually lighten your motorcycle. The bracket comes on your oil-cooler.

Aluminum Side Covers for Triumph Scrambler 1200 X/XC/XE - Improved Heat Protection and Dynamic Look

Aluminum Side Covers for Triumph Scrambler 1200 X/XC/XE - Improved Heat Protection and Dynamic Look 2

-20%

Scrambler 1200 x/xc/xe

Side covers (for original high exhaust system) Triumph Scrambler 1200 X/XC/XE

€158.40 €198.00

Enhance your Triumph Scrambler 1200 X/XC/XE with these aluminum side covers designed for the original high exhaust line. They not only improve heat protection but also add a dynamic look to your bike. These covers allow you to replace the original plastic parts with a more robust and aesthetically pleasing solution. Easy to install, they fit directly in...

Side covers (low exhaust line) for Triumph Scrambler 1200 XC/XE

Side covers (low exhaust line) for Triumph Scrambler 1200 XC/XE 2

-20%

Parts

Side covers (low exhaust line) for Triumph Scrambler 1200 XC/XE

€158.40 €198.00

Side covers for Triumph Scrambler 1200 XC/XE in aluminium. Attaches to replace the original side covers of your Triumph 1200 XC or XE.

Side covers for Moto Guzzi V7 850

Side covers for Moto Guzzi V7 850 2

-20%

Parts

Side covers for Moto Guzzi V7 850

€60.00 €75.00

It comes to replace the stock plastic side cover of your motorcycle. The side panel will bring a better finish level to your Moto Guzzi, using noble material.

Side leather saddlebag for Moto Guzzi V7 850

Side leather saddlebag for Moto Guzzi V7 850 2

-15%

Parts

Side leather saddlebag for Moto Guzzi V7 850

€232.05 €273.00

It comes to replace the stock plastic side cover of your motorcycle. The side panel will bring a better finish level to your Moto Guzzi, using noble material. It enables you to transport some stuff and gives a retro distinguished look to your bike. It's available in Aged brown, gold, black leather. Saddlebag measurements: 20cm x 20cm x 7cm.

Classic aluminum side covers for Triumph Speed Twin / Thruxton 1200

Classic aluminum side covers for Triumph Speed Twin / Thruxton 1200 2

-20%

Home

Classic aluminum side covers for Triumph Speed Twin / Thruxton 1200

€60.00 €75.00

Classic side covers for liquid cooled Triumph (2016-...) designed and handcrafted in aluminum in our workshop in France. It replaces your original plastic side covers to bring a strongest look to your motorcycle, using noble material. Available for both left and right side. Comes with all the necessary stainless steel hardware. Available in Brushed or...

Headlight brackets for original headlight for Interceptor 650

Headlight brackets for original headlight for Interceptor 650 2

-20%

Interceptor / Continental GT 650

Headlight brackets for original headlight for Interceptor 650

€103.20 €129.00

Headlight fixation brackets for Royal Enfield 650 Interceptor and Continental GT 650. This pair of headlight brackets is mounted to replace the original ones. Compatible with bulb or LED headlights. Suitable if you keep the original key switch. If you opt for our flat fork crown with relocated key switch, you can fit our small 60mm headlight brackets....

Universal classic-vintage motorcycle rear mudguard

Universal classic-vintage motorcycle rear mudguard 2

-15%

Parts

Universal classic-vintage motorcycle rear mudguard

€102.00 €120.00

An essential accessory for retro motorcycle enthusiasts. Made from stainless steel, this fender is designed to give your motorcycle an authentic and elegant look. With its classic design and neat finish, it will add a unique touch of style to your café-racer, scrambler, or other motorcycle. This fender is specially designed to fit classic and vintage...

Large bag holder for Triumph short seat kit (2016 - ...)

Large bag holder for Triumph short seat kit (2016 - ...) 2

-20%

Home

Large bag holder for Triumph short seat kit (2016 - ...)

€192.00 €240.00

Turn indicators holdersDesigned for our large removable rolled pannier or messenger bag, this bracket is compatible with our Triumph Short Seat Kit (2016-...). This bracket is designed to accommodate one or two large panniers if you have a BAAK short seat kit. We've obviously designed it so that the pannier doesn't get in the way of the passenger. The...

Windscreen-for-triumph-1200-scrambler-xe-xc-custom

Windscreen-for-triumph-1200-scrambler-xe-xc-custom 2

-20%

Triumph

Windscreen for Triumph 1200 Scrambler XE-XC

€76.80 €96.00

You'll agree that on the Triumph Scrambler XE and XC, the rear part of the original speedometer lacks a refined finish... That's why we created this windscreen, available in brushed aluminum or satin black, both simple and elegant, specifically designed for this model. Our windscreen is specially designed to perfectly complement the original fenders of...

Universal motorcycle front headlight brackets

Universal motorcycle front headlight brackets 2

-20%

Parts

Universal motorcycle front headlight brackets

€103.20 €129.00

Mounting brackets for front motorcycle headlight, ø180mm, with lateral fixings for ø8mm bolts. They measure 85mm in length and are only available for ø41mm fork tubes. You can choose the option with two indicator mounting brackets, ø8mm or ø10mm (or none). Collars and bolts are made of stainless steel, and the brackets are made of aluminum, all painted...

Radiator guard for Triumph (2016-...) T120 - T100 - Speed Twin 900

Radiator guard for Triumph (2016-...) T120 - T100 - Speed Twin 900 2

-20%

Parts

Radiator guard for Triumph (2016)

€67.20 €84.00

Protect your Triumph Bonneville (2016-...) radiator with this high-quality stainless steel guard, coated in premium satin black epoxy paint. Designed to last, it offers optimal protection without compromising engine cooling. Comes with stainless steel mounting hardware. Made in France

Side plate bracket for Triumph Bobber (2017)

Side plate bracket for Triumph Bobber (2017) 2

-20%

Parts

Side plate bracket for Triumph Bobber (2017)

€76.00 €95.00

Optimize the appearance of your Triumph Bonneville Bobber with this side license plate bracket. Featuring plate illumination and plug-and-play wiring, it ensures easy installation. Not compatible with the original mudguard, this bracket is tolerated by certain motorcycle inspection centers in France. Made in France

Fork Spring blocks +15mm for Moto Guzzi V7 850

Fork Spring blocks +15mm for Moto Guzzi V7 850 2

-15%

Parts

Fork Spring blocks +15mm for Moto Guzzi V7 850

€26.35 €31.00

This pair of stainless steel fork spring shims allows you to raise the front end of your V7 850 by 15mm, so that your bike retains a similar ride height if you fit our 390mm Big Body shocks. These spacers are simply fitted in addition to the original fork spring spacers. sold in pairs Made in France

US plate bracket for original mudguard Royal Enfield 650 Inter/GT

US plate bracket for original mudguard Royal Enfield 650 Inter/GT 2

-20%

Parts

US plate bracket for original mudguard Royal Enfield 650 Inter/GT

€36.00 €45.00

This plate holder is suitable for US format license plates (horizontal 170x100mm). It is made of 3mm-thick aluminum, painted with satin black epoxy paint. This plate holder is to be purchased in addition to the original fender plate holder in order to convert it to fit US plates. Made in France

Radiator guard for Royal Enfield 650 Interceptor / Continental GT

Radiator guard for Royal Enfield 650 Interceptor / Continental GT 2

-20%

Parts

Radiator guard for Royal Enfield 650 Interceptor / Continental GT

€67.20 €84.00

Protect your radiator with this protective grille specially designed for the Royal Enfield 650 Interceptor and Continental GT. Made of stainless steel, it guarantees unfailing strength. Its high-quality satin black epoxy paint ensures exceptional durability, with no risk of matification over time. Ideal as a replacement for the original grille, this...

Flat Triple Clamp Triumph T100/T120 – 3 Aluminum Versions | Made in France

Flat Triple Clamp Triumph T100/T120 – 3 Aluminum Versions | Made in France 2

-20%

Parts

Flat triple trees Triumph T100/T120

€480.00 €600.00

Transform your Triumph T100/T120 with this flat, mass-cut aluminum fork crown. Finished in satin black with a high-quality epoxy paint, it comes with a pair of bridges of your choice. This fork crown lowers your bike by 15mm at the front, so we recommend tuning your shocks or opting for our lowering kit. It is also compatible with Street Twin and Speed...

Moto Guzzi V7 850/V9 Skid Plate - Stainless Steel, Brushed or Black Satin

Moto Guzzi V7 850/V9 Skid Plate - Stainless Steel, Brushed or Black Satin 2

-20%

Parts

Engine protection for Moto Guzzi V7 850 - V9 (Euro 5)

€79.20 €99.00

Protect your Moto Guzzi V7 850, or V9 (Euro 5 Starting 2021) engine with this stainless steel skid plate. Available in two finishes: brushed or sleek satin black epoxy paint. Durable, stylish, and easy to install with all necessary mounting hardware included. It’s the perfect combo of looks and practicality, keeping your bike safe while turning heads....

Headlight brackets for original headlights V7 III / V7 850 / V9

Headlight brackets for original headlights V7 III / V7 850 / V9 2

-20%

Parts

Headlight brackets for original headlights Moto Guzzi V7 III / V7 850 / V9

€103.20 €129.00

Enhance the look of your Moto Guzzi V7 III, V7 850 or V9 with these machined aluminum headlight clamps, compatible with original LED and bulb headlights. With a length of 60 mm and 39-40 mm mounting clamps, they also allow the installation of adaptable turn signals. Finished in satin-black epoxy, they are supplied in pairs with stainless steel screws...

Bouchon plat de réservoir pour triumph

Bouchon plat de réservoir pour triumph 2

-20%

Parts

Flat fuel tank cap for Triumph

€46.40 €58.00

Available in black finish only, without a locking system. Crafted with a black anodized treatment for exceptional durability and style. This product has been carefully selected by the BAAK workshop team for its elegant design and superior quality. It installs easily as a direct replacement for the original cap.

Motorcycle Grime 136

Motorcycle Grime 136 2

-10%

Home

Motorcycle Cleaner MOTO GRIME 136 - Fictech (500 mL)

€18.63 €20.70

MOTO GRIME 136 is a specialized cleaner for your motorcycle's chain, sprockets, and transmission. It penetrates, dissolves, and removes chain oil and grease effortlessly in seconds, without damaging the O-ring, X-ring, and Z-ring transmission chain seals.

MOTO MATT 741 Cleaner - Fictech (500 mL)

-10%

Home

MOTO MATT 741 Cleaner - Fictech (500 mL)

€13.50 €15.00

Waterless Cleaner Specially Designed for Matte Motorcycle Paints Effortlessly removes dirt, dust, and cleans without scratching matte paint and plastic surfaces on your motorcycle.

Moto Wash – 116 Effectively Removes Various Dirt

-10%

Home

MOTO WASH 116 Cleaner - Fictech (1 Liter)

€14.31 €15.90

This cleaner and degreaser effectively removes insects, tar, mud, and various dirt without damaging surfaces. Suitable for use on both glossy and matte finishes, it is highly efficient and safe to use everywhere (fairings, paint, varnish, metals, rims, wheels, tires, frames, plastics, transmission, etc.).

Complete Cleaning Kit

Complete Cleaning Kit 2

-10%

Home

Complete Cleaning Kit

€58.50 €65.00

The ultimate kit for cleaning and maintaining your motorcycle. MOTO SHINE 742: Waterless Motorcycle Wax Cleaner MOTO GRIME 136: Special Chain, Sprocket, and Transmission Cleaner MOTO MATT 741: Quick Detailer for Matte Motorcycles MOTO WASH 116: Quick Cleaner/Degreaser for Motorcycles Free Microfiber Included

MOTO SHINE 742 - Waterless Motorcycle Cleaner

-10%

Home

MOTO SHINE 742 Cleaner - Fictech (500 mL)

€13.50 €15.00

Waterless Wax Cleaner specially designed for motorcycles. Cleans and shines without scratching the paint, chrome, stainless steel, carbon, and plastic parts of your motorcycle. Removes dirt, dust, and the dull film that builds up over time on shiny surfaces. Thanks to its carnauba wax formula, Shine 742 restores brilliance to surfaces and provides...

Universal Reflector for License Plate

Universal Reflector for License Plate 2

-20%

Home

Universal Reflector for License Plate

€7.92 €9.90

Black finish, mounts on the license plate bracket or directly on the license plate.

Rear Brake Caliper Guard for Triumph

Rear Brake Caliper Guard for Triumph 2

-20%

Triumph

Rear Brake Caliper Guard for Triumph

€28.80 €36.00

Protect your rear brake caliper with this stainless steel guard, specially designed for Triumph motorcycles. Since the rear caliper of your Triumph is located below the wheel axle, it is naturally exposed to stone impacts during off-road riding and curbs in urban settings. This caliper guard has been specifically designed to cover the caliper and...

Gallinella Rear Section for Royal Enfield 650 Interceptor / Continental GT (without seat)

Gallinella Rear Section for Royal Enfield 650 Interceptor / Continental GT (without seat) 2

-20%

Royal Enfield

Gallinella Rear Section for Royal Enfield 650 Interceptor / Continental GT (without seat)

€552.00 €690.00

Make this Gallinella Tail Kit for Royal Enfield 650 Interceptor / Continental GT the centerpiece of your customization project, and transform your Royal Enfield into a timeless machine that stands out from the crowd. This kit includes: Bolt-on rear loop and cutting template Gallinella resin tail section Not compatible with the original seat

Short seat kit rear loop for Royal Enfield 650

Short seat kit rear loop for Royal Enfield 650 2

-15%

Interceptor / Continental GT 650

Short seat kit rear loop for Royal Enfield 650

€168.30 €198.00

This rear loop is designed to shorten the back of your motorcycle, offering a sleek, minimalist style and a more compact overall silhouette. Made with a high-quality glossy black epoxy coating, it perfectly matches the frame’s color for discreet and seamless integration.

41mm Fork Tube Clamp Universal

41mm Fork Tube Clamp Universal 2

-20%

Parts

41mm Fork Tube Clamp Universal

€36.00 €45.00

This aluminum bracket attaches to your original fork tube, allowing you to mount accessories such as a speedometer, GPS, switch, etc. Compatible with all 41mm forks. M8 thread.

View

Rear Brake Master Cylinder Protection for Royal Enfield 650

Rear Brake Master Cylinder Protection for Royal Enfield 650 2

-20%

Royal Enfield

Rear Brake Master Cylinder Protection for Royal Enfield 650

€28.80 €36.00

Protect your rear brake master cylinder while adding an aesthetic touch to your Royal Enfield 650 with this robust and stylish protection. Available in a brushed or satin black finish, this inox protection is designed to withstand the elements and impacts.

Side Covers for Moto Guzzi V7 I & V7 II

Side Covers for Moto Guzzi V7 I & V7 II 2

-20%

Moto Guzzi

Side Covers for Moto Guzzi V7 I & V7 II

€60.00 €75.00

Easy to install, the cover replaces the original plastic side cover of your motorcycle. It enhances the finish of your Moto Guzzi. Sold individually, delivered with all the necessary stainless steel screws. Be sure to select both the left AND right sides if you want the pair.

Triumph Thruxton 1200 Tank Strap | Leather & Custom Triumph Motorcycle

Triumph Thruxton 1200 Tank Strap | Leather & Custom Triumph Motorcycle 2

-20%

Triumph

Triumph Thruxton 1200 Tank Strap

€76.80 €96.00

Leather tank strap designed for Triumph Thruxton 1200 tanks. It fits under the original stainless steel strap, adding a refined look to your tank while enhancing its appearance. Made in France

BSA Gold Star Leather Tank Strap

BSA Gold Star Leather Tank Strap 2

-20%

Parts

BSA Gold Star Leather Tank Strap

€100.00 €125.00

Leather tank strap designed for BSA Gold Star 650 tanks. It enhances your tank's appearance with a refined look while protecting it from scratches. Made in France

Rear Footpeg Mounting Plate for Royal Enfield 650

-20%

Royal Enfield

Rear Footpeg Mounting Plate for Royal Enfield 650

€96.00 €120.00

Designed to move the passenger foot pegs forward and down, making room for the installation of large saddlebags while increasing passenger comfort without interfering with the rider. This is a sturdy stainless steel plate with a satin black epoxy coating.

Wire Splitter

-15%

Parts

Wire Splitter

€8.16 €9.60

The wire splitter provides you with an additional connection point. Compatible with all BAAK wiring harnesses.

Royal Enfield Interceptor / Continental GT 650 Airbox Removal Kit for Original Battery

Royal Enfield Interceptor / Continental GT 650 Airbox Removal Kit for Original Battery 2

-20%

Interceptor / Continental GT 650

Royal Enfield Interceptor / Continental GT 650 Airbox Removal Kit for Original Battery

€396.00 €495.00

Give your motorcycle a Roadster look by freeing up the space of the original airbox on your Royal Enfield Interceptor or Continental GT by replacing it with this airbox removal kit. This kit creates a hollow space, visually lightening the motorcycle. The air filters will no longer be hidden, revealing their function. This kit includes: 2 air filters 1...

Black Injection covers for Triumph Bonneville T120

Black Injection covers for Triumph Bonneville T120 2

-15%

Parts

Black Injection covers for Triumph Bonneville T120

€55.25 €65.00

Black Injection Covers for Triumph Bonneville T120. These injection covers are original Triumph T120 covers but have been treated with satin black epoxy paint. Sold as a pair.

Classic Moto Headlight Protection Grille - Universal

Classic Moto Headlight Protection Grille - Universal 2

-20%
New

Parts

Classic Headlight Protection Grid - Universal

€72.00 €90.00

Stainless steel headlight grille with satin black epoxy coating. Perfectly fits our Classic headlight but can also be adapted to many OEM and aftermarket headlights (180mm diameter).

Universal aluminum number plaque

Universal aluminum number plaque 2

-20%
New

Home

Universal aluminum number plaque

€15.60 €19.50

Universal aluminum number. Dimensions Width 315 mm Height 210 mm. screws not supplied.

Air filters for Royal Enfield 650 Interceptor / Continental GT

Air filters for Royal Enfield 650 Interceptor / Continental GT 2

-20%
New

Home

Air filters for Royal Enfield 650 Interceptor / Continental GT

€86.40 €108.00

This pair of air filters will offer a retro aesthetic to your machine while maintaining perfect filtration quality. They are notably present in our airbox deletion kits . This kit includes: 2 Air filters a bitterness

Lighthouse support Bates - Fantic Caballero

-20%
New

Home

Lighthouse support Bates - Fantic Caballero

€19.20 €24.00

Bat light fixing platinum for Fantic Caballero. This platinum is fixed on your lower fork tee and will allow you to mount a lower bread lighthouse on your machine. made of 4mm thick stainless steel. black satin epoxy paint. Caballero 125-250-500 from 2018 to… + All versions except flat track

Delocated contactor support - Fantic Caballero

Delocated contactor support - Fantic Caballero 2

-20%
New

Home

Delocated contactor support - Fantic Caballero

€23.20 €29.00

Delocated contactor support for Caballero 500. This kit allows you to relocate your key contactor from its original location under the tank of your Fantic. The relocation of your key contactor leads to the loss of the steering locking system of your motorcycle.

Original counter support for Fantic Caballero

Original counter support for Fantic Caballero 2

-20%
New

Home

Original counter support for Fantic Caballero

€39.20 €49.00

original counter support for Caballero. This accessory allows you to shift your meter at the back of the handlebars to visually free the front of your machine. It is then above the tank. Your original counter becomes more discreet, a simple solution to offer an original look to your Fantic. Compatibility: Caballero 125-250-500 from 2018 to… + All...

Based headlight plate - Fantic Caballero

Based headlight plate - Fantic Caballero 2

-20%
New

Home

Based headlight plate - Fantic Caballero

€110.40 €138.00

Plate for BATS Type type for Fantic Caballero. This aluminum plaque harmoniously mask the steering column and the cables that are on the way after assembling a front bars with lower fixing on your machine. its 4 black leather, brown or gold leather binding necklaces, keep it with your fork tubes. available in black satin and brushed aluminum finish....

Kit -Battle before high - Fantic Caballero

Kit -Battle before high - Fantic Caballero 2

-20%
New

Home

Kit -Battle before high - Fantic Caballero

€199.20 €249.00

high bold guard for Fantic Caballero. This front mudguard with a stainless steel scrambler look comes to mount in the high position on the lower fork tee of your machine thanks to our specific fixing plate. It offers good protection and the guarantee of an off -road look. available in 3 different finishes (brushed, shiny black, satin black). This kit...

Classic rear mudguard kit - Fantic Caballero

Classic rear mudguard kit - Fantic Caballero 2

-20%
New

Home

Classic rear mudguard kit - Fantic Caballero

€278.40 €348.00

classic rear mudguard for Fantic Caballero in stainless steel. Its molded end gives it a classic and elegant look. It provides good protection against projections of the rear wheel. equipped with a rear light with LEDs with LEDs (CE approved), plate lighting (CE approved) Plug & amp; Play, a plate holder, rear indicators supports to choose from,...

Radiator sides - Fantic Caballero

Radiator sides - Fantic Caballero 2

-20%
New

Home

Radiator sides - Fantic Caballero

€60.00 €75.00

radiator flanks for Fantic Caballero Protect your radiator with these protection flanks specially designed for the Fantic Caballero 500. manufactured in brushed aluminum. sold in pairs. They integrate harmoniously into the Caballero design and can be associated with other accessories for an even more assertive look. Compatibility: Caballero...

Bike stand raiser for Royal Enfield 650 Interceptor / Continental GT

Bike stand raiser for Royal Enfield 650 Interceptor / Continental GT 2

-20%
New

Interceptor / Continental GT 650

Bike stand raiser for Royal Enfield 650 Interceptor / Continental GT

€52.80 €66.00

Say goodbye to excessive lean on your Royal Enfield 650 Interceptor or Continental GT (2018-...) This kickstand extends the length of your original kickstand by 20 mm. Perfect for bikes with upgraded shocks or large tires, this machined aluminum accessory finished in satin black epoxy is durable and elegant. Made in France

"Camembert" air filters

"Camembert" air filters 2

-20%
New

Parts

"Camembert" air filters

€78.40 €98.00

"Camembert" style round air filters. This pair of air filters offers a retro look and a great filtration quality to your motorcycle. Connection sleeve : Ø53,5mm Filter : Ø139mm and 41mm thick. Comes in pair with two stainless steel fixation collars. These filters are only suitable for Triumph Bonneville T120.