Prices drop

Showing 1-72 of 72 item(s)

Air filters kit for BMW NineT I BAAK

Air filters kit for BMW NineT I BAAK 2

-15%

BMW

Air filters kit for BMW NineT

$278 $327

Air filters kit for BMW NineT. This kit includes two black air filters and a red oil breather. The air filters plug directly on the intake, in place of the original air intake pipes of your BMW NineT. No power or torque improvement with this kit, it's simply an aesthetic modification. We recommend you to go for our Aluminium battery box along with this...

Airbox removal kit for Triumph Bobber (2017)

Airbox removal kit for Triumph Bobber (2017) 2

-30%

Bonneville Bobber (2017 -...)

Airbox removal kit for Triumph Bobber (2017)

$185 $264

This airbox removal kit for Triumph Bonneville Bobber (2017-...) enables you replaced the original plastic airbox by an elegant leather protection part and two air filters and a crankcase breather. The air filters and breather are available in polished, satin black and brushed version. Appart from the aesthetic aspect, this modification leads to a slight...

View

Airbox removal kit for Triumph T120 (2016)

Airbox removal kit for Triumph T120 (2016) 2

-30%

Bonneville T120 (2016 -...)

Airbox removal kit for Triumph T120 (2016)

$230 $329

Airbox removal kit for Triumph Bonneville T120 (2016-...). This kit enables you to visually lighten the line of your motorcycle and make it breathe better. This kit includes: The aluminium battery box (Satin black only) A pair of "camembert" air filters A pair of aluminium side covers (Satin black or Brushed) with or without saddlebag(s) All the...

View

Aluminium intake cover for Royal Enfield 650 Interceptor / Continental GT

Aluminium intake cover for Royal Enfield 650 Interceptor / Continental GT 2

-40%

Interceptor / Continental GT 650

Aluminium intake covers for Royal Enfield 650 Interceptor / Continental GT

$46 $76

Pair of aluminium intake covers for Royal Enfield 650. These covers come in place of the original ones to give a better aesthetic look to your motorcycle. It comes by pair. It's available in Satin black and Brushed finish. It comes with all the necessary mounting hardware.

View

Aluminium wheel arch for BMW R 1200 NineT by BAAK

Aluminium wheel arch for BMW R 1200 NineT by BAAK 2

-35%

BMW

Aluminium wheel arch for BMW NineT

$95 $147

Aluminum Fender Eliminator Kit for BMW R 1200 NineT. This wheel arch enables you get a perfect finish result once your rear fender is removed. It's equipped with a LED taillight, it comes with its plug & play wiring harness for taillight, and its fixation kit. It's satin black powder coat painted so it can resist over the years. Suitable for BMW R...

Bates headlight

Bates headlight 2

-15%

Parts

Bates headlight

$75 $88

Bates headlight for motorcycle. This low fixation Bates style headlight is ø15cm diameter. It has a metal casing and trim ring. It's discreet and enables you get a better finish level on your motorcycle. It's available in Chromed, Satin Black or with Black casing and Brushed or Chromed trim ring. It comes with the fixation bracket designed for the model...

View

Bates Headlight with Integrated Speedometer for Royal Enfield 650 | BAAK

Bates Headlight with Integrated Speedometer for Royal Enfield 650 | BAAK 2

-15%

Parts

Bates Headlight / Integrated Speedometer for Royal Enfield 650

$692 $815

Bates Headlight with Integrated Motogadget Tiny Speedometer for Royal Enfield 650 Interceptor / Continental GT (2018–...). Built into a ø150mm Bates headlight shell, this integrated speedometer headlight is a Plug & Play solution to streamline the cockpit of your Interceptor or Continental GT while retaining all the functionalities of your original...

View

Bates headlight bracket for Moto Guzzi V7 III / V7 850

Bates headlight bracket for Moto Guzzi V7 III / V7 850 2

-35%

V7 III (2017 -...)

Bates headlight bracket for Moto Guzzi V7 III / V7 850

$19 $29

Bates headlight fixation bracket for Moto Guzzi V7 III et V7 850, required to mount a lower fixation headlight (Bates style) on your motorcycle. Manufactured out of aluminium, 3mm thick, black powder coat painting. Available in black finish only. This bracket comes with all the necessary stainless steel screwing.

Batte headlight fixing for Moto Guzzi V9

Batte headlight fixing for Moto Guzzi V9 2

-35%

V9 (2016 -...)

Bates headlight bracket for Moto Guzzi V9

$19 $29

Bates headlight mounting bracket for Moto Guzzi V9, required to install a bottom-mounted headlight (Bates type) on your bike. Made from 3mm thick aluminum with satin black epoxy paint. Only available in black finish. This bracket is included by default with our Bates headlight kits for Moto Guzzi V9. Delivered with the required stainless steel hardware.

Bates headlight bracket for Royal Enfield 650 Interceptor / Continental GT

-35%

Interceptor / Continental GT 650

Bates headlight bracket for Royal Enfield 650 Interceptor / Continental GT

$19 $29

Bates headlight fixation bracket for Royal Enfield 650 Interceptor / Continental GT, required to mount a lower fixation headlight (Bates style) on your motorcycle. Manufactured out of aluminium, 3mm thick, black powder coat painting. Available in black finish only. This bracket comes with all the necessary stainless steel screwing.

Bates headlight bracket for Triumph Thruxton 1200 / Speed Twin

Bates headlight bracket for Triumph Thruxton 1200 / Speed Twin 2

-35%

Triumph

Bates headlight bracket for Triumph Thruxton 1200 / Speed Twin

$19 $29

Bates headlight fixation bracket for Triumph Thruxton 1200 and Speed Twin. This bracket fits the lower fork triple trees of the Thruxton 1200 / Speed Twin and enables you mount any Bates headlight with a lower fixation on your motorcycle. Distance between the fixation holes axis : 113mm. 4mm thick machined aluminium. Satin black powder coat painting.

Fixation de phare Bates tés de fourche large Triumph (2016-…)

Fixation de phare Bates tés de fourche large Triumph (2016-…) 2

-35%

Triumph

Bates headlight bracket for wide triple trees for Triumph (2016)

$19 $29

This Bates headlight fixation bracket fits the Triumph Bonneville T100 / T120 / Street Twin / Street Scrambler new generation (2016-...) equipped with our Wide fork triple yokes for Triumph. It's manufactured out of 4mm thick machined aluminium. Satin black powder coat painting.

Bates headlight plate for BMW NineT

Bates headlight plate for BMW NineT 2

-30%

BMW

Bates headlight plate for BMW NineT

$139 $198

Headlight plate for Bates headlight for BMW R NineT. This aluminium plate enables to hide the steering column and the cables after the assembly of a Bates headlight on your NineT. Handcrafted out of aluminium, it's available in Satin black or Raw aluminium finish. Compatible with a Bates headlight or the original headlight. The leather fixation collars...

View

Bates headlight plate with leather collars for Royal Enfield Interceptor / Continental GT 650

Bates headlight plate with leather collars for Royal Enfield Interceptor / Continental GT 650 2

-30%

Interceptor / Continental GT 650

Bates headlight plate for Royal Enfield 650 Interceptor / Continental GT

$136 $194

Bates headlight plate for Royal Enfield 650 Interceptor / Continental GT (2018-...). Attention, this part is only compatible with our Flat triple trees kit, it requires to move the ignition switch under the gas tank. Manufactured out of aluminium, this plate comes to hide the steering column and cables left visible after the assembly of a Bates...

View

Headlight plate for Bates Headlight for Triumph (2016-...)

Headlight plate for Bates Headlight for Triumph (2016-...) 2

-30%

Triumph

Bates headlight plate for Triumph (2016)

$139 $198

Bates headlight plate for Triumph (since 2016 - liquid-cooled). This aluminium plate comes to hide the steering column and cables running around after you mounted a Bates headlight (with lower fixation) on your Triumph. The 4 leather collars (brown, black, gold or ruby color) attach the plate to your fork tubes. Available in Satin black or Brushed...

View

Bates headlight plate for Triumph (pre-2016)

Bates headlight plate for Triumph (pre-2016) 2

-30%

Triumph

Bates headlight plate for Triumph (pre-2016)

$139 $198

Bates type headlight plate for Triumph (pre- 2016 - air-cooled). Essential to hide the steering column and all the cables after the mounting of a Bates headlight. Comes with 4 black leather clamps in black, aged brown, gold or ruby color. Available in satin black and raw aluminium finish. Measurements : 220mm x 190mm.

View

Classic headlight

Classic headlight 2

-15%

Parts

Classic headlight

$90 $106

Round headlight for classic motorcycles, with M8 side mount and ø180mm diameter. It features metal casing and bezel, with plastic glass, offering an exceptional level of finish. Its streamlined casing gives it a resolutely classic look. Depending on the motorcycle model chosen, a plug and play harness is supplied (which may justify a price difference...

View

Classic Moto Headlight Protection Grille - Universal

Classic Moto Headlight Protection Grille - Universal 2

-30%

Parts

Classic Headlight Protection Grid - Universal

$74 $106

Stainless steel headlight grille with satin black epoxy coating. Perfectly fits our Classic headlight but can also be adapted to many OEM and aftermarket headlights (180mm diameter).

Classic Medium front mudguard for BMW NineT

Classic Medium front mudguard for BMW NineT 2

-20%

BMW

Classic Medium front mudguard for BMW NineT

$268 $335

Classic Medium front mudguard for BMW NineT, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled, comes with its satin black powder coated fixation bracket suitable for the selected model and the stainless steel screws required. It's designed and manufactured by our team at the workshop in...

View

Classic Medium front mudguard for Moto Guzzi

Classic Medium front mudguard for Moto Guzzi 2

-20%

Moto Guzzi

Classic Medium front mudguard for Moto Guzzi

$113 $141

Classic Medium front mudguard for Moto Guzzi V7 I, V7 II, V7 III and V7 850, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled so it fits the original fixation system of your motorcycle. It's designed and manufactured by our team at the workshop in France. It's available in satin black,...

View

Classic Mini front mudguard for BMW NineT

Classic Mini front mudguard for BMW NineT 2

-20%

BMW

Classic Mini front mudguard for BMW NineT

$268 $335

Classic Mini front mudguard for BMW R 1200 NineT, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled, comes with its satin black powder coated fixation bracket suitable for the selected model and the stainless steel screws required. It's designed and manufactured by our team at the...

View

Classic Mini front mudguard for Moto Guzzi

Classic Mini front mudguard for Moto Guzzi 2

-20%

Moto Guzzi

Classic Mini front mudguard for Moto Guzzi

$101 $127

Classic Mini front mudguard for Moto Guzzi V7 I, V7 II, V7 III and V7 850, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled so it fits the original fixation system of your motorcycle. It's designed and manufactured by our team at the workshop in France. It's available in satin black,...

View

Classic rear mudguard for BMW NineT

Classic rear mudguard for BMW NineT 2

-35%

BMW

Classic rear mudguard for BMW NineT

$286 $440

Classic rear mudguard for BMW R 1200 NineT manufactured out of stainless steel. It has an elegant raw look thanks to the molded edge at its end. You will still keep good protection against the rear wheel projections. Equipped with a LED taillight (CE approved for road use) with license plate lightning, a rear license plate holder, rear turn indicators...

View

Moto Guzzi V7 850/V9 Skid Plate - Stainless Steel, Brushed or Black Satin

Moto Guzzi V7 850/V9 Skid Plate - Stainless Steel, Brushed or Black Satin 2

-35%

Parts

Engine protection for Moto Guzzi V7 850 - V9 (Euro 5)

$76 $116

Protect your Moto Guzzi V7 850, or V9 (Euro 5 Starting 2021) engine with this stainless steel skid plate. Available in two finishes: brushed or sleek satin black epoxy paint. Durable, stylish, and easy to install with all necessary mounting hardware included. It’s the perfect combo of looks and practicality, keeping your bike safe while turning heads....

View

Bouchon plat de réservoir pour triumph

Bouchon plat de réservoir pour triumph 2

-30%

Parts

Flat fuel tank cap for Triumph

$48 $68

Black finish only, without locking system. Made with a black anodized treatment for long-lasting durability and impeccable style. This product was carefully selected by the BAAK workshop team for its elegant look and superior quality. It is easily installed as a direct replacement for the original cap.

Front turn indicators bracket for Moto Guzzi V7 / V9

Front turn indicators bracket for Moto Guzzi V7 / V9 2

-35%

Moto Guzzi

Front turn indicators bracket for Moto Guzzi V7 / V9

$23 $35

Front turn indicators fixation bracket for Moto Guzzi V7 and V9, simple, effective and very discreet. It's stainless steel laser cut and satin black powder coat painted. It gets assembled on the upper regulator screw of your motorcycle. Sold without blinkers.

View

Front turn indicators bracket for Triumph

Front turn indicators bracket for Triumph 2

-35%

Triumph

Front turn indicators bracket for Triumph

$23 $35

Front turn indicators bracket / support for Triumph is simple, effective and very discreet. It enables you relocate your turn indicators under the steering column. It's stainless steel laser cut and satin black powder coated. It's particularly suitable for our Rectifier bracket for Triumph, or can be tightened on the upper fixation of the oil cooling...

View

Front-turn-indicators-bracket-Triumph-Bobber-1200

Front-turn-indicators-bracket-Triumph-Bobber-1200 2

-35%

Parts

Front turn indicators bracket for Triumph Bobber 1200

$19 $29

Turn signals brackets kit to relocate the indicators Triumph Bobber 1200 to visually lighten your motorcycle. The bracket comes on your oil-cooler.

View

Front turn indicators brackets Royal Enfield 650 Interceptor / Continental GT

Front turn indicators brackets Royal Enfield 650 Interceptor / Continental GT 2

-35%

Interceptor / Continental GT 650

Front turn indicators brackets for Royal Enfield 650 Interceptor / Continental GT

$23 $35

Front turn indicators brackets for Royal Enfield 650 Interceptor / Continental GT. Simple and very discreet, these brackets are satin black powder coat painted and enable you mount any universal turn indicator with a øM8 or øM10 fixation on your Royal Enfield. It gets assembled under your lower from triple trees. It comes in pairs, sold without turn...

View

Headlight brackets for original headlight for Triumph (2016 )

Headlight brackets for original headlight for Triumph (2016 ) 2

-40%

Triumph

Headlight brackets for original headlight for Triumph (2016 )

$91 $151

Headlight fixation brackets for Triumph original headlight (since 2016). This pair of lighthouse brackets come to replace the original ones and reveal the fork tubes. Suitable for the Triumph T120 / T100 Street Scrambler / Street Twin / Thruxton 1200 (since 2016) original headlights. The optional turn indicators brackets enable mount on the headlight...

View

Headlight brackets for original headlights V7 III / V7 850 / V9

Headlight brackets for original headlights V7 III / V7 850 / V9 2

-35%

Parts

Headlight brackets for original headlights Moto Guzzi V7 III / V7 850 / V9

$98 $151

Enhance the look of your Moto Guzzi V7 III, V7 850 or V9 with these machined aluminum headlight clamps, compatible with original LED and bulb headlights. With a length of 60 mm and 39-40 mm mounting clamps, they also allow the installation of adaptable turn signals. Finished in satin-black epoxy, they are supplied in pairs with stainless steel screws...

View

Headlight bulb wiring extension

-15%

Parts

Headlight bulb wiring extension

$19 $22

This headlight wiring harness bulb extension suits any motorcycle equipped with a H4 lighthouse bulb. It enables to connect your headlight to the motorcycle when you relocate the original wiring harness. Length : 420mm This headlight bulb extension is manufactured by ourselves at BAAK Motocyclettes workshop. It comes by default with all our headlight for...

Headlight struts

Headlight struts 2

-40%

Parts

Headlight struts

$15 $26

Motorcycle headlight struts, manufactured out of aluminum, to perfectly adjust the position of your headlight. The hole diameter is ø8mm, the exterior diameter is ø29mm. For Moto Guzzi V7 Classic or Heritage headlight, choose the 10mm ones. For Triumph and Royal Enfield Classic or Heritage headlight, choose the 5mm ones. Comes in pairs.

View

Heritage headlight

Heritage headlight 2

-15%

Parts

Heritage headlight

$99 $116

Classic headlight for motorcycle. This M8 side fixation headlight has a ø180mm diameter. The casing and trim ring are metal, the window is plastic. It offers a great finish level, it's reduced casing (only 135mm deep) will offer a more compact look to your motorcycle. It's available with a Chromed or Brushed trim ring. Depending on the motorcycle model...

View

Aluminium intake cover for Triumph 900 (2016-...)

Aluminium intake cover for Triumph 900 (2016-...) 2

-30%

Triumph

Intake covers for Triumph 900 (2016)

$53 $76

Pair of aluminium intake covers for Triumph (2016-...). These covers come in place of the original ones to give a better aesthetic look to your motorcycle. It's suitable for Triumph Street Twin / Street Cup and Bonneville T100 (2016-...). It comes by pair. It's available in Satin black and Brushed finish. It comes with all the necessary mounting...

View

Land Rover Defender Fender vents

Land Rover Defender Fender vents 2

-20%

Parts

Land Rover Defender Fender vents

$103 $129

The devil is in the details and this exactly why we’ve decide to add these beautiful metal fender vents to our new line of parts for Land Rover Defender. These are beautiful upgrades over the factory plastic vents. Both the Design and R&D departments worked jointly on this line of parts so Defender’s owner can personalized their beloved vehicle to...

View

BAAK | Land Rover Defender Radiator Grill

BAAK | Land Rover Defender Radiator Grill 2

-20%

Parts

Land Rover Defender Radiator Grill

$234 $292

Without a doubt THE statement piece of our new line of parts for Land Rover Defender. Both the design and R&D departments imagined this line so Defender’s owner can personalized their beloved vehicle to their tastes. This grille gives to your Defender a unique personality: both raw and classic at the same time. The smooth and long lines come from a...

View

License plate holder for original Moto Guzzi V9 fender

License plate holder for original Moto Guzzi V9 fender 2

-30%

V9 (2016 -...)

License plate holder for original Moto Guzzi V9 fender

$138 $197

License plate holder for original rear fender of Moto Guzzi V9. This bracket, painted in satin black epoxy, mounts directly in place of the original unit. It consists of a license plate holder, a round LED tail light (EU approved) with license plate illumination, a pair of indicator brackets of your choice, and a plug & play wiring harness.

View

Plate support for Royal Enfield 650 Interceptor / Continental GT

Plate support for Royal Enfield 650 Interceptor / Continental GT 2

-20%

Interceptor / Continental GT 650

License plate holder for Royal Enfield 650 Interceptor / Continental GT

$158 $197

License plate holder for original Royal Enfield 650 Interceptor / Continental GT mudguard. Equipped with a taillight (CE approved), license plate lightning, compatible wiring harness and included turn indicators brackets to be mounted on your upper shock absorber axles or the license plate holder on choice. The EU approved LED taillight comes with its...

View

License plate holder for Royal Enfield Classic / Bullet original mudguard

License plate holder for Royal Enfield Classic / Bullet original mudguard 2

-30%

Bullet / Classic (2008- ..)

License plate holder for Royal Enfield Classic / Bullet original mudguard

$138 $197

Discreet license plate holder for Royal Enfield Classic / Bullet 500 original mudguard. It's equipped with a ø70mm EU approved taillight with integrated license plate lightning, a plug & play wiring harness, turn indicators brackets on choice and optional turn indicators. This part comes in place of your original taillight / license plate holder unit....

View

License plate holder for Triumph Bobber original mudguard (2017)

License plate holder for Triumph Bobber original mudguard (2017) 2

-30%

Bonneville Bobber (2017 -...)

License plate holder for Triumph Bobber original mudguard (2017)

$148 $211

License plate holder for the original mudguard of the Triumph Bonneville Bobber (2017-...). This taillight / license plate support unit comes in place of the original part. It's equipped with an EU approved LED vintage taillight with LED integrated license plate lightning, a license plate triangle, a plug & play wiring harness, optional turn...

View

BAAK License plate lightning

BAAK License plate lightning 2

-15%

Parts

License plate lightning

$18 $21

LED license plate lightning. This LED license plate lightning is approved according to the ECE European standards (12V / 2W). We use it on some license plate holders manufactured at BAAK's. Measurement of the license plate lightning : Length 17mm Diameter 12mm øM8 fixation shaft.

Medium front mudguard for BMW NineT

Medium front mudguard for BMW NineT 2

-20%

BMW

Medium front mudguard for BMW NineT

$268 $335

Medium front mudguard for BMW R 1200 NineT, manufactured out of stainless steel. It's short but it's still long enough to protect you from the front wheel splashes. It's pre-drilled, comes with its satin black powder coated fixation bracket suitable for the selected model and the stainless steel screws required. It's designed and manufactured by our team...

View

Medium front mudguard for Moto Guzzi V7

Medium front mudguard for Moto Guzzi V7 2

-20%

Moto Guzzi

Medium front mudguard for Moto Guzzi V7

$155 $194

Medium front mudguard for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9, manufactured out of stainless steel. It's short but it's still long enough to protect you from the front wheel splashes. It's pre-drilled so it fits the original fixation system of your motorcycle. It's designed and manufactured by our team at the workshop in France. It's available...

View

Mini front mudguard for BMW NineT

Mini front mudguard for BMW NineT 2

-20%

BMW

Mini front mudguard for BMW NineT

$268 $335

Mini front mudguard for BMW R 1200 NineT, manufactured out of stainless steel. This front fender is very short, it enables you visually lighten the front of your NineT. It's pre-drilled, comes with its satin black powder coated fixation bracket suitable for the selected model and the stainless steel screws required. It's designed and manufactured by our...

View

Original turn indicators brackets kit for Triumph (2016)

Original turn indicators brackets kit for Triumph (2016) 2

-35%

Triumph

Original turn indicators brackets kit for Triumph (2016)

$23 $35

Turn signals brackets kit to relocate the factory or accessories indicators from Triumph that have keyed connection, to visually lighten your motorcycle. The front bracket comes on your oil-cooler, and the rear brackets come on the shock absorbers axles. These bracket kit comes without turn indicators.

View

Radiator guard for Triumph (2016-...) T120 - T100 - Speed Twin 900

Radiator guard for Triumph (2016-...) T120 - T100 - Speed Twin 900 2

-40%

Parts

Radiator guard for Triumph (2016)

$59 $99

Protect your Triumph Bonneville (2016-...) radiator with this high-quality stainless steel guard, coated in premium satin black epoxy paint. Designed to last, it offers optimal protection without compromising engine cooling. Comes with stainless steel mounting hardware. Made in France

Rear turn indicators brackets for Moto Guzzi

Rear turn indicators brackets for Moto Guzzi 2

-35%

Moto Guzzi

Rear turn indicators brackets for Moto Guzzi

$23 $35

Rear turn signals bracket for Moto Guzzi. Enables you to mount your blinkers / indicators on the upper shock absorber axles for a more discreet look. Comes in pairs. This part is available for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9.

View

Rear turn indicators brackets for Royal Enfield by BAAK

Rear turn indicators brackets for Royal Enfield by BAAK 2

-40%

Royal Enfield

Rear turn indicators brackets for Royal Enfield

$21 $35

Rear turn indicators holders for Royal Enfield. This pair of aluminium brackets will let you mount your turn indicators on the upper shock absorbers axles so it remains discreet. It's satin black high quality powder-coated so it resists over the years. Make sure to select the right model of motorcycle so you receive the holders that are suitable for your...

View

Rear turn indicators brackets for Triumph

Rear turn indicators brackets for Triumph 2

-35%

Triumph

Rear turn indicators brackets for Triumph

$23 $35

Rear turn signals bracket for Triumph. Enables you to mount your turn signals on the upper shock absorber axles for a more discreet look. Compatible with the original passenger grab handle. Make sure to select the right model of motorcycle so you can receive brackets suitable for your motorcycle. Comes in pairs. Length: 50mm.

View

Rear turn indicators brackets for Triumph (pre- 2016)

Rear turn indicators brackets for Triumph (pre- 2016) 2

-35%

Triumph

Rear turn indicators brackets for Triumph (pre- 2016)

$23 $35

Rear turn indicators support for Triumph (pre-2016 - air-cooled). Simple, effective and very discreet. It's manufactured out of stainless steel, laser cut (3mm thick) and satin black powder coat painted. It fits with any rear fender. Delivered without turn signals. This part isn't suitable for the original (or accessory) passenger grab bar.

Rectifier / turn indicators / horn bracket for Triumph (pre- 2016)

Rectifier / turn indicators / horn bracket for Triumph (pre- 2016) 2

-30%

Triumph

Rectifier / turn indicators / horn bracket for Triumph (pre- 2016)

$40 $58

This bracket enables you to relocate your rectifier, front turn indicators and horn on a Triumph (pre-2016 - air-cooled) below your steering column. It visually lightens the line of the front of your motorcycle by grouping these parts on one bracket. This bracket is 21,8cm wide and 12cm high. It get assembled in the original place of your horn, under the...

Rectifier bracket for Triumph (2016)

Rectifier bracket for Triumph (2016) 2

-35%

Triumph

Rectifier bracket for Triumph (2016)

$34 $53

Rectifier bracket for Triumph (2016-... - liquid-cooled). This bracket enables you to relocate your rectifier behind your engine oil cooler instead of the lower fork trees to lighten the front of your bike. Manufactured out of stainless steel laser cut. You'll be obliged to relocate your wiring harness under your gas tank. Comes with all the necessary...

Rectifier bracket for Triumph (pre- 2016)

Rectifier bracket for Triumph (pre- 2016) 2

-35%

Triumph

Rectifier bracket for Triumph (pre- 2016)

$23 $35

Rectifier relocation bracket for Triumph (pre-2016 - air-cooled). This bracket enables you to relocate the voltage rectifier, in place of the horn. Then the horn can be attached below, on the same bracket. It's manufactured out of aluminum laser cut. You may be obliged to move the original wiring harness under the gas tank. All the necessary screwing...

Removable windshield Moto Guzzi V7 III, V7 850, V9 | Retro and protection

Removable windshield Moto Guzzi V7 III, V7 850, V9 | Retro and protection 2

-15%

Parts

Removable windshield for Moto Guzzi V7 III / V7 850 / V9

$814 $958

Give your Moto Guzzi V7 III, V7 850 or V9 a retro-touring touch with this removable windscreen. 2 sec to remove without tools. Supplied complete with fastenings and matching headlight brackets, it's available in gloss black or leather (black or brown). Please note that the original headlamp is not suitable, so you'll need a ø180mm classic headlamp and a...

View

Resistors for LED turn indicators

-15%

Parts

Resistors for LED turn indicators

$15 $18

Resistors for LED motorcycles turn indicators, essential to get a correct blinking speed once your LED blinkers are mounted on a motorcycle that isn't equipped with LED ones in stock configuration. Comes in pairs. You need two pairs to connect both front and rear turn signals on your motorcycle.

Chrome front headlight for classic motorcycle ø180mm - vintage look

Chrome front headlight for classic motorcycle ø180mm - vintage look 2

-15%

Parts

Round chrome front headlight for classic motorcycle

$75 $88

Round front headlight for classic motorcycles, featuring side mounting M8 and a diameter of Ø180mm. It stands out with a 100% chrome metal housing and bezel, along with a plastic lens, offering an exceptional level of finish. Its streamlined housing gives it a distinctly classic look. Available in a universal version, compatible with any motorcycle. Made...

Scrambler front mudguard for BMW NineT

Scrambler front mudguard for BMW NineT 2

-20%

BMW

Scrambler front mudguard for BMW NineT

$268 $335

High front fender for BMW R NineT 1200. This Scrambler look front mudguard is handcrafted out of stainless steel, and gets assembled on the lower triple trees of your BMW NineT thanks to the provided fixation bracket. It offers a good protection and a strong off road look to your motorcycle. Available in Glossy black, Satin black, Brushed and Polished...

View

Aluminum Side Covers for Triumph Scrambler 1200 X/XC/XE - Improved Heat Protection and Dynamic Look

Aluminum Side Covers for Triumph Scrambler 1200 X/XC/XE - Improved Heat Protection and Dynamic Look 2

-35%

Scrambler 1200 x/xc/xe

Side covers (for original high exhaust system) Triumph Scrambler 1200 X/XC/XE

$151 $232

Enhance your Triumph Scrambler 1200 X/XC/XE with these aluminum side covers designed for the original high exhaust line. They not only improve heat protection but also add a dynamic look to your bike. These covers allow you to replace the original plastic parts with a more robust and aesthetically pleasing solution. Easy to install, they fit directly in...

View

Side covers (low exhaust line) for Triumph Scrambler 1200 XC/XE

Side covers (low exhaust line) for Triumph Scrambler 1200 XC/XE 2

-35%

Parts

Side covers (low exhaust line) for Triumph Scrambler 1200 XC/XE

$151 $232

Side covers for Triumph Scrambler 1200 XC/XE in aluminium. Attaches to replace the original side covers of your Triumph 1200 XC or XE.

View

Side license plate holder for Royal Enfield 650 Interceptor / Continental GT

Side license plate holder for Royal Enfield 650 Interceptor / Continental GT 2

-30%

Interceptor / Continental GT 650

Side license plate holder for Royal Enfield 650 Interceptor / Continental GT

$138 $197

This side license plate holder for Royal Enfield 650 Interceptor / Continental GT (2018-...) is designed to be mounted on your passenger footrest. It will let you clean the rear end of your motorcycle by re-locating the license plate. It comes with an EU approved taillight with integrated license plate lightning. It comes with a plug & play wiring...

Side license plate holder for Royal Enfield Classic / Bullet

Side license plate holder for Royal Enfield Classic / Bullet 2

-30%

Bullet / Classic (2008- ..)

Side license plate holder for Royal Enfield Classic / Bullet

$138 $197

Side license plate holder for Royal Enfield Bullet and Classic 500. It comes with its taillight and integrated license plate lightning, and gets assembled on the upper left shock absorber axle to visually lighten the tail of your bike. This holder comes with a plug & play wiring harness so you can assemble it easily on your Royal Enfield.

Replacement air filters for Triumph Bobber 1200 Airbox removal kit

Replacement air filters for Triumph Bobber 1200 Airbox removal kit 2

-30%

Bonneville Bobber (2017 -...)

Spare air filters for Triumph Bobber 1200 airbox removal kit

$57 $81

This pack of spare air filters is suitable for our Airbox removal kit for Triumph Bobber 1200 (2017-...). It's composed of two air filters available in Brushed, polished and satin black. The air filters replacement routine on your motorcycle depends on how you use it along the year.

View

Speedometer lowering kit for BMW NineT

Speedometer lowering kit for BMW NineT 2

-40%

BMW

Speedometer lowering kit for BMW NineT

$15 $26

Lowering kit for BMW NineT speedometer. These 4 struts enable you lower your original NineT speedometer by 10mm, to get a clear riding post. Suitable for BMW NineT Pure, Scrambler, Racer and Urban GS.

Système anti-vibration Bullet 500

Système anti-vibration Bullet 500 2

On sale!
-50%

Outlet

Système anti-vibration Bullet 500

$64 $127

Bullet 500 anti-vibration system: this crankshaft plate, located behind the ignition flywheel, reduces engine vibrations by 50%.

Corner supporter cover for BMW Ninet

Corner supporter cover for BMW Ninet 2

-20%

BMW

Turn indicators holder cover for BMW NineT

$28 $35

Front turn indicators holder cover for BMW NineT. These black aluminium bracket covers are particularly useful to keep a clean finish if you replace the original front blinkers. Designed and manufactured in our Lyon workshop in aluminum and powder coated in black. Comes in pair with the necessary hardware for the assembly.

Aluminium turn indicators holders for license plate

Aluminium turn indicators holders for license plate 2

-40%

Parts

Turn indicators holders on license plate

$21 $35

These aluminium turn indicators holders are designed to be assembled on a BAAK license plate holder, on the motorcycle of your choice. It's available in 3 different versions : For turn indicators with øM8 shafts For turn indicators with øM10 shafts For original / accessory Triumph turn indicators (2016-...) It comes with the necessary stainless steel...

View

Moto Guzzi V7 850 turn signal harness - Easy mounting | BAAK

Moto Guzzi V7 850 turn signal harness - Easy mounting | BAAK 2

-15%

Parts

Turn signal harness MOTO GUZZI V7 850

$33 $39

Need to fit aftermarket indicators to your Moto Guzzi? This plug & play harness is for you! Compatible with your motorcycle's original terminals, it adapts easily to turn signals. With Japanese terminals from ø3.2 mm to 3.7 mm. The practical solution for customizing your bike. Sold in pairsMade in France

Universal aluminum number plaque

Universal aluminum number plaque 2

-30%
New

Home

Universal aluminum number plaque

$24 $34

Universal aluminum number. Dimensions Width 315 mm Height 210 mm. screws not supplied.

Universal rear plate / fire support I BAAK

Universal rear plate / fire support I BAAK 2

-20%

Universal

Universal license plate holder / taillight

$79 $99

Universal license plate holder / taillight unit, with integrated license plate lightning, mounted on a universal plate holder. Distance between centers of the mounting holes: 45mm (M5 holes). Supplied with the necessary stainless hardware. You can fit this taillight / license plate holder on any rear mudguard. Light dimension : Diameter 70mm / Depth 50mm.

Universal motorcycle front headlight brackets

Universal motorcycle front headlight brackets 2

-35%

Parts

Universal motorcycle front headlight brackets

$98 $151

Mounting brackets for front motorcycle headlight, ø180mm, with lateral fixings for ø8mm bolts. They measure 85mm in length and are only available for ø41mm fork tubes. You can choose the option with two indicator mounting brackets, ø8mm or ø10mm (or none). Collars and bolts are made of stainless steel, and the brackets are made of aluminum, all painted...

View

BAAK black aluminium headlight brackets for motorcycles

BAAK black aluminium headlight brackets for motorcycles 2

-35%

Parts

Universal short headlight clamps for classic motorcycles

$98 $151

Headlight bracket for motorcycles, for M8 side headlight fixation, with optional front turn indicators holders. Designed and manufactured at BAAK's in France. Perfect to put a BAAK headlight on your motorcycle and improve its finish level. Ø39 - 40mm for Moto Guzzi V7I / V7 II / V7 III / V7 850 / V9 (60mm size) Ø41 - 42mm for Triumph Bonneville T100 / SE...

View