Prices drop

Showing 1-33 of 33 item(s)

Aluminium wheel arch for BMW R 1200 NineT by BAAK

Aluminium wheel arch for BMW R 1200 NineT by BAAK 2

-20%

BMW

Aluminium wheel arch for BMW NineT

€100.00 €125.00

Aluminum Fender Eliminator Kit for BMW R 1200 NineT. This wheel arch enables you get a perfect finish result once your rear fender is removed. It's equipped with a LED taillight, it comes with its plug & play wiring harness for taillight, and its fixation kit. It's satin black powder coat painted so it can resist over the years. Suitable for BMW R...

BAAK N°1 handlebars Ø25,4mm

BAAK N°1 handlebars Ø25,4mm 2

-20%

Parts

BAAK N°1 handlebars Ø25,4mm

€127.20 €159.00

Wide stainless steel BAAK N°1 handlebars in Ø25,4mm (1 inch). It's flatter, wider and has more pullback / sweep to the rider than most of the other handlebars. It will offer a very distinguished look to your motorcycle, and improve its handling qualities and your riding position. It's available in Satin black and Brushed finish. The stainless steel tubes...

View

Bates headlight plate with leather collars for Royal Enfield Interceptor / Continental GT 650

Bates headlight plate with leather collars for Royal Enfield Interceptor / Continental GT 650 2

-20%

Interceptor / Continental GT 650

Bates headlight plate for Royal Enfield 650 Interceptor / Continental GT

€132.00 €165.00

Bates headlight plate for Royal Enfield 650 Interceptor / Continental GT (2018-...). Attention, this part is only compatible with our Flat triple trees kit, it requires to move the ignition switch under the gas tank. Manufactured out of aluminium, this plate comes to hide the steering column and cables left visible after the assembly of a Bates...

View

Headlight plate for Bates Headlight for Triumph (2016-...)

Headlight plate for Bates Headlight for Triumph (2016-...) 2

-20%

Triumph

Bates headlight plate for Triumph (2016)

€135.20 €169.00

Bates headlight plate for Triumph (since 2016 - liquid-cooled). This aluminium plate comes to hide the steering column and cables running around after you mounted a Bates headlight (with lower fixation) on your Triumph. The 4 leather collars (brown, black, gold or ruby color) attach the plate to your fork tubes. Available in Satin black or Brushed...

View

Central speedometers fascia for Austin Mini (1967-2000)

Central speedometers fascia for Austin Mini (1967-2000) 2

-20%

Home

Central speedometers fascia for Austin Mini (1967-2000)

€100.00 €125.00

Central speedometers fascia for Austin Mini (1967-2000). This cast aluminum part was design to fit the original speedometer block (two gauges and central speedometer). The assembly requires to drill the original plastic speedometer box to fit this fascia over it. So the installation of this part is irreversible. We consciously kept the aluminum cast...

Central switch panel for Austin Mini (1967-2000)

Central switch panel for Austin Mini (1967-2000) 2

-20%

Parts

Central switch panel for Austin Mini (1967-2000)

€71.20 €89.00

3 buttons central switch panel for Austin Mini (1967-2000). The panel comes in place of the original one, it's designed to welcome 3 buttons. All the stainless steel screwing kit is provided. We kept the aluminium cast finish raw, which gives a very special charm to this central switch panel.

Classic Mini front mudguard for BMW NineT

Classic Mini front mudguard for BMW NineT 2

-20%

BMW

Classic Mini front mudguard for BMW NineT

€228.00 €285.00

Classic Mini front mudguard for BMW R 1200 NineT, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled, comes with its satin black powder coated fixation bracket suitable for the selected model and the stainless steel screws required. It's designed and manufactured by our team at the...

View

Gallinella rear fairing rear for Royal Enfield 650 Interceptor / Continental GT

Gallinella rear fairing rear for Royal Enfield 650 Interceptor / Continental GT 2

-20%

Royal Enfield

Gallinella fairing kit for Royal Enfield 650 Interceptor / Continental GT

€999.99 €1,249.99

Gallinella rear fairing kit for Royal Enfield 650 Interceptor / Continental GT (2018-...). Turn this kit into the masterpiece of your custom project and make your Royal Enfield stand out from the mass. This kit includes: Screwed short subframe with cutting template Short leather seat Gallinella fiber fairing License plate holder, taillight (trim ring...

View

Gallinella Rear Section for Royal Enfield 650 Interceptor / Continental GT (without seat)

Gallinella Rear Section for Royal Enfield 650 Interceptor / Continental GT (without seat) 2

-20%

Royal Enfield

Gallinella Rear Section for Royal Enfield 650 Interceptor / Continental GT (without seat)

€552.00 €690.00

Make this Gallinella Tail Kit for Royal Enfield 650 Interceptor / Continental GT the centerpiece of your customization project, and transform your Royal Enfield into a timeless machine that stands out from the crowd. This kit includes: Bolt-on rear loop and cutting template Gallinella resin tail section Not compatible with the original seat

Gear lever knob for Austin Mini (1967-2000)

Gear lever knob for Austin Mini (1967-2000) 2

-20%

Parts

Gear lever knob for Austin Mini (1967-2000)

€71.20 €89.00

Gear lever knob for Austin Mini (1967-2000). This aluminium cast part comes in place of the original gear lever knob. We consciously kept the aluminium cast finish raw, which gives a very special character to this knob.

Handlebar clamps for Royal Enfield 650 Interceptor / Continental GT

Handlebar clamps for Royal Enfield 650 Interceptor / Continental GT 2

-20%

Interceptor / Continental GT 650

Handlebar clamps for Royal Enfield 650 Interceptor / Continental GT

€76.80 €96.00

Machined aluminium handlebar clamps for Royal Enfield 650 Interceptor / Continental GT. These risers are available in ø22mm diameter, ø28,6mm diameter or 1 inch (ø25,4mm) diameter, it's lighter and elegant. The clamps are satin black powder coat painted, and come with all the stainless steel screwing kit compatible with your motorcycle. Designed and...

View

Headlight brackets for original headlight for Interceptor 650

Headlight brackets for original headlight for Interceptor 650 2

-20%

Interceptor / Continental GT 650

Headlight brackets for original headlight for Interceptor 650

€103.20 €129.00

Headlight fixation brackets for Royal Enfield 650 Interceptor and Continental GT 650. This pair of headlight brackets is mounted to replace the original ones. Compatible with bulb or LED headlights. Suitable if you keep the original key switch. If you opt for our flat fork crown with relocated key switch, you can fit our small 60mm headlight brackets....

View

Land Rover Defender Fender vents

Land Rover Defender Fender vents 2

-20%

Parts

Land Rover Defender Fender vents

€88.00 €110.00

The devil is in the details and this exactly why we’ve decide to add these beautiful metal fender vents to our new line of parts for Land Rover Defender. These are beautiful upgrades over the factory plastic vents. Both the Design and R&D departments worked jointly on this line of parts so Defender’s owner can personalized their beloved vehicle to...

View

BAAK | Land Rover Defender Radiator Grill

BAAK | Land Rover Defender Radiator Grill 2

-20%

Parts

Land Rover Defender Radiator Grill

€199.20 €249.00

Without a doubt THE statement piece of our new line of parts for Land Rover Defender. Both the design and R&D departments imagined this line so Defender’s owner can personalized their beloved vehicle to their tastes. This grille gives to your Defender a unique personality: both raw and classic at the same time. The smooth and long lines come from a...

View

Leather cable guides

Leather cable guides 2

-20%

Parts

Leather cable guides

€6.40 €8.00

Leather cable guide. This strap enables you fasten your cables, or tie it together to your handlebars. If just like us, your motorcycle's finish is part of your obsessions, this cable guide is perfect for your project. Available in Aged brown, Black and Gold leather. Available in 80mm, 90mm, 115mm or 130mm length. Each strap is 20mm wide. Sold as a...

View

Medium front mudguard for BMW NineT

Medium front mudguard for BMW NineT 2

-20%

BMW

Medium front mudguard for BMW NineT

€228.00 €285.00

Medium front mudguard for BMW R 1200 NineT, manufactured out of stainless steel. It's short but it's still long enough to protect you from the front wheel splashes. It's pre-drilled, comes with its satin black powder coated fixation bracket suitable for the selected model and the stainless steel screws required. It's designed and manufactured by our team...

View

Medium front mudguard for Moto Guzzi V7

Medium front mudguard for Moto Guzzi V7 2

-20%

Moto Guzzi

Medium front mudguard for Moto Guzzi V7

€132.00 €165.00

Medium front mudguard for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9, manufactured out of stainless steel. It's short but it's still long enough to protect you from the front wheel splashes. It's pre-drilled so it fits the original fixation system of your motorcycle. It's designed and manufactured by our team at the workshop in France. It's available...

View

Mini front mudguard for BMW NineT

Mini front mudguard for BMW NineT 2

-20%

BMW

Mini front mudguard for BMW NineT

€228.00 €285.00

Mini front mudguard for BMW R 1200 NineT, manufactured out of stainless steel. This front fender is very short, it enables you visually lighten the front of your NineT. It's pre-drilled, comes with its satin black powder coated fixation bracket suitable for the selected model and the stainless steel screws required. It's designed and manufactured by our...

View

Aluminium handlebar grips for motocycles classic, vintage, cafe racer

Aluminium handlebar grips for motocycles classic, vintage, cafe racer 2

-20%

Parts

Motorcycle handlebar mounts, aluminum

€76.80 €96.00

Machined aluminium handlebar clamps for motorcycle. These risers are available in ø22mm diameter, ø28,6mm diameter or 1 inch (ø25,4mm) diameter, it's lighter and elegant. The clamps are satin black powder coat painted, and come with stainless steel screwing (size on the choice). Designed and manufactured at BAAK's workshop. Made in France

View

Motorcycle mirror under handlebars round ø8 in steel

Motorcycle mirror under handlebars round ø8 in steel 2

-15%

Parts

Motorcycle mirror under handlebars round ø8 in steel

€38.25 €45.00

Mini black Ø80mm bike mirror especially designed to be mounted below the handlebar in lower position. It offers a very discreet look and a good rear visibility with its wide angle glass. Available without adapter (for Ø8mm through shaft mounting or with adapter for ø22mm handlebars). Sold individually. Fit both left and right sides, available in satin...

View

Relocated ignition switch bracket for Royal Enfield 650 Interceptor / Continental GT

Relocated ignition switch bracket for Royal Enfield 650 Interceptor / Continental GT 2

-20%

Interceptor / Continental GT 650

Relocated ignition switch bracket for Royal Enfield 650 Interceptor / Continental GT

€31.20 €39.00

Ignition switch relocation kit for Royal Enfield 650 Interceptor / Continental GT (2018-...). this kit is necessary to relocate the ignition switch from its original position to under your injection system, on the right side of your Royal Enfield. It includes an inox bracket and the wiring harness extension. The relocation of your ignition switch...

Relocated ignition switch control bracket for Triumph (2016)

Relocated ignition switch control bracket for Triumph (2016) 2

-20%

Triumph

Relocated ignition switch control bracket for Triumph (2016)

€24.00 €30.00

Ignition switch control relocation bracket for Triumph (2016-... - liquid-cooled). It enables to relocate the ignition switch control under the gas tank. Manufactured in inox laser cut. You'll be obliged to relocate your wiring harness under your gas tank. Comes with all the necessary stainless steel screwing. The relocation of your ignition switch...

Relocated ignition switch control bracket kit for Triumph (pre- 2016)

Relocated ignition switch control bracket kit for Triumph (pre- 2016) 2

-20%

Triumph

Relocated ignition switch control bracket kit for Triumph (pre- 2016)

€39.20 €49.00

Relocated ignition switch control bracket for Triumph (pre-2016 - air-cooled). This simple ignition switch support enables you to relocate the ignition control between the fuel tank and the left carburetor. Fits on the right side on the injection models (EFI). It requires to move the wiring harness that is in your headlight, under the gas tank, without...

Round mirror ø8 steel for motorcycle

Round mirror ø8 steel for motorcycle 2

-15%

Parts

Round mirror ø8 steel for motorcycle

€33.15 €39.00

Mini round mirror, Ø8cm diameter with M8 threading, for upper position. The mirror shaft is 13cm long, its shape was specifically designed to guaranty a good rear visibility and a discreet look. Suitable for motorcycles with M10 screwing original mirrors fixation. Sold by unit, available in satin black only. Fit both left and right sides.

View

Scrambler front mudguard for BMW NineT

Scrambler front mudguard for BMW NineT 2

-20%

BMW

Scrambler front mudguard for BMW NineT

€228.00 €285.00

High front fender for BMW R NineT 1200. This Scrambler look front mudguard is handcrafted out of stainless steel, and gets assembled on the lower triple trees of your BMW NineT thanks to the provided fixation bracket. It offers a good protection and a strong off road look to your motorcycle. Available in Glossy black, Satin black, Brushed and Polished...

View

Aluminum Side Covers for Triumph Scrambler 1200 X/XC/XE - Improved Heat Protection and Dynamic Look

Aluminum Side Covers for Triumph Scrambler 1200 X/XC/XE - Improved Heat Protection and Dynamic Look 2

-20%

Scrambler 1200 x/xc/xe

Side covers (for original high exhaust system) Triumph Scrambler 1200 X/XC/XE

€158.40 €198.00

Enhance your Triumph Scrambler 1200 X/XC/XE with these aluminum side covers designed for the original high exhaust line. They not only improve heat protection but also add a dynamic look to your bike. These covers allow you to replace the original plastic parts with a more robust and aesthetically pleasing solution. Easy to install, they fit directly in...

View

Side covers (low exhaust line) for Triumph Scrambler 1200 XC/XE

Side covers (low exhaust line) for Triumph Scrambler 1200 XC/XE 2

-20%

Parts

Side covers (low exhaust line) for Triumph Scrambler 1200 XC/XE

€158.40 €198.00

Side covers for Triumph Scrambler 1200 XC/XE in aluminium. Attaches to replace the original side covers of your Triumph 1200 XC or XE.

View

Side speedometer holder for Triumph Street Twin / Street Scrambler

Side speedometer holder for Triumph Street Twin / Street Scrambler 2

-20%

Parts

Side speedometer holder for Triumph Street Twin / Street Scrambler

€71.20 €89.00

Side speedometer holder for Triumph Street Twin / speed Twin 900 / Street Scrambler. This part enables you to relocate your speedometer on the right or left of the ignition switch to visually lighten the front of your motorcycle. It mounts on the left or right fork tube.

Speedometer lowering kit for BMW NineT

Speedometer lowering kit for BMW NineT 2

-20%

BMW

Speedometer lowering kit for BMW NineT

€17.60 €22.00

Lowering kit for BMW NineT speedometer. These 4 struts enable you lower your original NineT speedometer by 10mm, to get a clear riding post. Suitable for BMW NineT Pure, Scrambler, Racer and Urban GS.

Steering wheel cap for Austin Mini (1967-2000)

Steering wheel cap for Austin Mini (1967-2000) 2

-20%

Parts

Steering wheel cap for Austin Mini (1967-2000)

€71.20 €89.00

Aluminum Steering wheel cap for Austin Mini (1967-2000). It's suitable for 9 screws steering wheels (M4 screws - here mounted on a Moto Lita), the distance between two screws center is 35mm (1&3/8"). We consciously kept the aluminum cast finish raw, which gives a very special character to this steering wheel boss. All the stainless steel screws are...

Tiny Motogadget speedo fixation bracket for Triumph (pre- 2016)

Tiny Motogadget speedo fixation bracket for Triumph (pre- 2016) 2

-20%

Triumph

Tiny Motogadget speedo fixation bracket for Triumph (pre- 2016)

€39.20 €49.00

Tiny Motogadget speedometer fixation bracket for Triumph (pre-2016). It's a machined aluminium bracket, satin black powder coated. This part comes with all the necessary screwing.

View

Trail engine guard - Triumph 1200 XE-XC

Trail engine guard - Triumph 1200 XE-XC 2

-20%
New

Home

Trail engine guard - Triumph 1200 XE-XC

€128.00 €160.00

Aluminum Trail Skid Plate for Triumph Scrambler 1200 XE-XC In addition to giving your Scrambler an adventurous look, this skid plate provides effective protection for the lower engine in all conditions. Made of 4 mm thick aluminum, it provides a real shield against splashes, stones, and impacts associated with aggressive off-road riding. Easy to install,...

View

Universal aluminum number plaque

Universal aluminum number plaque 2

-20%
New

Home

Universal aluminum number plaque

€23.20 €29.00

Universal aluminum number. Dimensions Width 315 mm Height 210 mm. screws not supplied.

Home