Prices drop

Showing 37-72 of 78 item(s)

License plate holder for US format

License plate holder for US format 2

-20%

Universal

License plate holder for US format

€36.00 €45.00

This license plate holder is suitable for US size license plates (horizontal). It's manufactured out of 3mm thick aluminium and it's satin black powder coat painted. This part is only suitable for BAAK license plate holders.

License plate holder for US format side license plates

License plate holder for US format side license plates 2

-20%

Parts

License plate holder for US format side license plates

€36.00 €45.00

This license plate holder is suitable for US size license plates (vertical) mounted in side position. It's manufactured out of 3mm thick aluminium and it's satin black powder coat painted. This part is only suitable for BAAK side license plate holders.

License plate holder for US format with light mount

License plate holder for US format with light mount 2

-20%

Parts

License plate holder for US format with light mount

€36.00 €45.00

This license plate holder is suitable for US size license plates (horizontal). It's manufactured out of 3mm thick aluminium and it's satin black powder coat painted. This support allows you to mount a license plate light. This part is only suitable for BAAK license plate holders.

Triumph wheel arch/plate holder, rear position and turn signal holder

Triumph wheel arch/plate holder, rear position and turn signal holder 2

-20%

Triumph

License plate holder kit for Triumph Thruxton 1200 / Speed Twin 1200

€168.00 €210.00

Fender Eliminator Kit for Triumph Thruxton 1200 and Speed Twin Euro 4 / Euro 5 (2016 – …). This satin black aluminum undertray visually lightens the rear of your Triumph and gives it a more radical look. This kit includes a LED taillight (CE approved) with license plate lightning, a license plate holder on choice (side or classic position), turn...

View

License plate holder triangle for Triumph Thruxton / Speed Twin 1200

License plate holder triangle for Triumph Thruxton / Speed Twin 1200 2

-20%

Thruxton 1200 (2016 -...)

License plate holder triangle for Triumph Thruxton / Speed Twin 1200

€44.00 €55.00

License plate holder triangle for rear fender eliminator kit of Triumph Thruxton 1200 or Speed Twin 1200 (2016-...). This support is dedicated to be assembled on the optional Rear fender removal kit offered by Triumph Motorcycles, or stands for a Short license plate holder for original rear fender on a Speed Twin. It enables you to remove the reflectors...

View

Lowering kit for Triumph T100-T120 (2016)

Lowering kit for Triumph T100-T120 (2016) 2

-15%

Triumph

Lowering kit for Triumph T100-T120 (2016)

€1,071.00 €1,260.00

Aluminium upper triple trees kit for lowering, available for Triumph Bonneville T100 / T120 / Street Twin (2016-... - liquid-cooled). It includes the flat upper triple tree, the handlebar clamps, the ignition switch and / or speedometer bracket, and the short Big Body shock absorbers. This lowering kit was designed and manufactured at our workshop. We...

View

Lowering kit for Triumph Thruxton 1200 / Speed Twin

Lowering kit for Triumph Thruxton 1200 / Speed Twin 2

-15%

Triumph

Lowering kit for Triumph Thruxton 1200 / Speed Twin

€943.50 €1,110.00

Aluminium upper triple trees kit for lowering, for Triumph Thruxton 1200 and Speed Twin (2016-...). This flat upper triple trees in machined aluminium has the same width as your original one but enables to lower the front end of your bike by 25mm without lifting up the fork tubes over the stock triple trees, for a perfect aesthetic result. Original...

View

Mini front mudguard for Moto Guzzi

Mini front mudguard for Moto Guzzi 2

-20%

Moto Guzzi

Mini front mudguard for Moto Guzzi

€132.00 €165.00

Mini front mudguard for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9, manufactured out of stainless steel. This front fender is very short, it enables you visually lighten the front of your motorcycle. It's pre-drilled so it fits the original fixation system of your motorcycle. It's designed and manufactured by our team at the workshop in France. It's...

View

Mini front mudguard for Triumph

Mini front mudguard for Triumph 2

-20%

Triumph

Mini front mudguard for Triumph

€132.00 €165.00

Mini front mudguard for Triumph, manufactured out of stainless steel. This front fender is very short, it enables you get a more compact look on the front end of your motorcycle. It's pre-drilled so you can easily fit it on your model of Triumph. It's designed and manufactured by our team at the workshop in France. It's available in satin black,...

View

Mini front mudguard for Triumph Bobber

Mini front mudguard for Triumph Bobber 2

-20%

Bonneville Bobber (2017 -...)

Mini front mudguard for Triumph Bobber

€168.00 €210.00

Mini front mudguard for Triumph Bonneville Bobber (2017-...), manufactured out of stainless steel. This front fender is very short, it enables you get a more compact look on the front end of your motorcycle. It's pre-drilled and comes with its fixation bracket so it can be easily fitted on your Triumph Bobber. This front fender isn't suitable for the...

View

Rear Brake Master Cylinder Protection for Royal Enfield 650

Rear Brake Master Cylinder Protection for Royal Enfield 650 2

-20%

Royal Enfield

Rear Brake Master Cylinder Protection for Royal Enfield 650

€28.80 €36.00

Protect your rear brake master cylinder while adding an aesthetic touch to your Royal Enfield 650 with this robust and stylish protection. Available in a brushed or satin black finish, this inox protection is designed to withstand the elements and impacts.

View

Rear Footpeg Mounting Plate for Royal Enfield 650

-20%

Royal Enfield

Rear Footpeg Mounting Plate for Royal Enfield 650

€96.00 €120.00

Designed to move the passenger foot pegs forward and down, making room for the installation of large saddlebags while increasing passenger comfort without interfering with the rider. This is a sturdy stainless steel plate with a satin black epoxy coating.

Rear turn indicators brackets for Moto Guzzi

Rear turn indicators brackets for Moto Guzzi 2

-20%

Moto Guzzi

Rear turn indicators brackets for Moto Guzzi

€24.00 €30.00

Rear turn signals bracket for Moto Guzzi. Enables you to mount your blinkers / indicators on the upper shock absorber axles for a more discreet look. Comes in pairs. This part is available for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9.

View

Rear turn indicators brackets for Triumph

Rear turn indicators brackets for Triumph 2

-20%

Triumph

Rear turn indicators brackets for Triumph

€24.00 €30.00

Rear turn signals bracket for Triumph. Enables you to mount your turn signals on the upper shock absorber axles for a more discreet look. Compatible with the original passenger grab handle. Make sure to select the right model of motorcycle so you can receive brackets suitable for your motorcycle. Comes in pairs. Length: 50mm.

View

Rear turn indicators brackets for Triumph (pre- 2016)

Rear turn indicators brackets for Triumph (pre- 2016) 2

-20%

Triumph

Rear turn indicators brackets for Triumph (pre- 2016)

€24.00 €30.00

Rear turn indicators support for Triumph (pre-2016 - air-cooled). Simple, effective and very discreet. It's manufactured out of stainless steel, laser cut (3mm thick) and satin black powder coat painted. It fits with any rear fender. Delivered without turn signals. This part isn't suitable for the original (or accessory) passenger grab bar.

Rectifier / turn indicators / horn bracket for Triumph (pre- 2016)

Rectifier / turn indicators / horn bracket for Triumph (pre- 2016) 2

-20%

Triumph

Rectifier / turn indicators / horn bracket for Triumph (pre- 2016)

€39.20 €49.00

This bracket enables you to relocate your rectifier, front turn indicators and horn on a Triumph (pre-2016 - air-cooled) below your steering column. It visually lightens the line of the front of your motorcycle by grouping these parts on one bracket. This bracket is 21,8cm wide and 12cm high. It get assembled in the original place of your horn, under the...

Rectifier bracket for Triumph (2016)

Rectifier bracket for Triumph (2016) 2

-20%

Triumph

Rectifier bracket for Triumph (2016)

€36.00 €45.00

Rectifier bracket for Triumph (2016-... - liquid-cooled). This bracket enables you to relocate your rectifier behind your engine oil cooler instead of the lower fork trees to lighten the front of your bike. Manufactured out of stainless steel laser cut. You'll be obliged to relocate your wiring harness under your gas tank. Comes with all the necessary...

Rectifier bracket for Triumph (pre- 2016)

Rectifier bracket for Triumph (pre- 2016) 2

-20%

Triumph

Rectifier bracket for Triumph (pre- 2016)

€24.00 €30.00

Rectifier relocation bracket for Triumph (pre-2016 - air-cooled). This bracket enables you to relocate the voltage rectifier, in place of the horn. Then the horn can be attached below, on the same bracket. It's manufactured out of aluminum laser cut. You may be obliged to move the original wiring harness under the gas tank. All the necessary screwing...

Relocated ignition switch control bracket for Triumph (2016)

Relocated ignition switch control bracket for Triumph (2016) 2

-20%

Triumph

Relocated ignition switch control bracket for Triumph (2016)

€24.00 €30.00

Ignition switch control relocation bracket for Triumph (2016-... - liquid-cooled). It enables to relocate the ignition switch control under the gas tank. Manufactured in inox laser cut. You'll be obliged to relocate your wiring harness under your gas tank. Comes with all the necessary stainless steel screwing. The relocation of your ignition switch...

Relocated ignition switch control bracket kit for Triumph (pre- 2016)

Relocated ignition switch control bracket kit for Triumph (pre- 2016) 2

-20%

Triumph

Relocated ignition switch control bracket kit for Triumph (pre- 2016)

€39.20 €49.00

Relocated ignition switch control bracket for Triumph (pre-2016 - air-cooled). This simple ignition switch support enables you to relocate the ignition control between the fuel tank and the left carburetor. Fits on the right side on the injection models (EFI). It requires to move the wiring harness that is in your headlight, under the gas tank, without...

Front mudguard risers kit for Royal Enfield Himalayan

Front mudguard risers kit for Royal Enfield Himalayan 2

-20%

Himalayan 400

Risers kit for Royal Enfield Himalayan front mudguard

€26.40 €33.00

Risers kit for Royal Enfield Himalayan. This 4 screws and 4 aluminium struts enable you to lift up your front mudguard by 10mm if you plan to mount a wider and higher tire on your Royal Enfield Himalayan. Suitable for your original mudguard. The struts must be mounted between your original front mudguard holder and the fork.Made in France

High Scrambler front mudguard for Moto Guzzi V7I and V7II

High Scrambler front mudguard for Moto Guzzi V7I and V7II 2

-20%

V7 I & V7 II (2007-2017)

Scrambler front mudguard for Moto Guzzi V7I / V7II

€228.00 €285.00

High front fender for Moto Guzzi V7I and V7II. This Scrambler look front mudguard is handcrafted out of stainless steel, and gets assembled on the lower triple trees of your V7 thanks to the provided black fixation bracket. It offers a good protection and a strong off road look to your motorcycle. Available in Glossy black, Satin black, Brushed and...

View

High Scrambler front mudguard for Triumph (2016-...) by BAAK

High Scrambler front mudguard for Triumph (2016-...) by BAAK 2

-20%

Triumph

Scrambler front mudguard for Triumph (2016)

€228.00 €285.00

High front fender for Triumph (2016-... - liquid-cooled). This high Scrambler look front mudguard is handcrafted out of stainless steel, and comes on the lower triple trees of your Triumph thanks to the provided black fixation bracket. It offers a good protection against the front wheel projections and a strong off road look to your motorcycle....

View

Scrambler high front mudguard for Triumph Bonneville, Thruxton and Scrambler (pre-2016)

Scrambler high front mudguard for Triumph Bonneville, Thruxton and Scrambler (pre-2016) 2

-20%

Triumph

Scrambler front mudguard for Triumph (pre-2016)

€228.00 €285.00

High front fender for Triumph (pre-2016 - air-cooled). This Scrambler look front mudguard is handcrafted out of stainless steel, and comes on the lower triple trees of your Triumph thanks to the provided black fixation bracket. It offers a good protection against the front wheel projections and a strong off road look to your motorcycle. Available in...

View

Side Covers for Moto Guzzi V7 I & V7 II

Side Covers for Moto Guzzi V7 I & V7 II 2

-20%

Moto Guzzi

Side Covers for Moto Guzzi V7 I & V7 II

€60.00 €75.00

Easy to install, the cover replaces the original plastic side cover of your motorcycle. It enhances the finish of your Moto Guzzi. Sold individually, delivered with all the necessary stainless steel screws. Be sure to select both the left AND right sides if you want the pair.

View

Royal Enfield - interceptor - side covers - black

Royal Enfield - interceptor - side covers - black 2

-20%

Interceptor / Continental GT 650

Side covers for Royal Enfield 650 Interceptor / Continental GT

€60.00 €75.00

Aluminium side covers for Royal Enfield 650 Interceptor / Continental GT. These aluminium side covers are designed and manufactured by our craftsmen at the workshop. It comes in place of the original plastic side panels of your Interceptor or Continental GT 650, and will highly improve its finish level. Available for Left or right side, comes with all...

View

Side license plate holder for Moto Guzzi

Side license plate holder for Moto Guzzi 2

-20%

Moto Guzzi

Side license plate holder for Moto Guzzi

€76.00 €95.00

License plate support / holder for Moto Guzzi. This part gets attached on the left upper shock absorber axis. It comes with a plug & play wiring harness. This support is satin black powder coat painted. If you choose the optional turn indicators, we'll provide the wiring harness and potential resistors necessary for their proper functioning according...

View

Side license plate holder for Royal Enfield 650 Interceptor / Continental GT

Side license plate holder for Royal Enfield 650 Interceptor / Continental GT 2

-20%

Interceptor / Continental GT 650

Side license plate holder for Royal Enfield 650 Interceptor / Continental GT

€134.40 €168.00

This side license plate holder for Royal Enfield 650 Interceptor / Continental GT (2018-...) is designed to be mounted on your passenger footrest. It will let you clean the rear end of your motorcycle by re-locating the license plate. It comes with an EU approved taillight with integrated license plate lightning. It comes with a plug & play wiring...

Side license plate holder for Royal Enfield Classic / Bullet

Side license plate holder for Royal Enfield Classic / Bullet 2

-20%

Bullet / Classic (2008- ..)

Side license plate holder for Royal Enfield Classic / Bullet

€134.40 €168.00

Side license plate holder for Royal Enfield Bullet and Classic 500. It comes with its taillight and integrated license plate lightning, and gets assembled on the upper left shock absorber axle to visually lighten the tail of your bike. This holder comes with a plug & play wiring harness so you can assemble it easily on your Royal Enfield.

Side license plate holder for Triumph

Side license plate holder for Triumph 2

-20%

Triumph

Side license plate holder for Triumph

€76.00 €95.00

Side license plate support / holder for Triumph. It attaches to the upper axis of the left shock absorber. It comes with a connection wiring harness that makes it 100% plug and play. Satin black powder coat painting finish. If you choose the optional turn indicators, we'll provide the potential resistors necessary for their proper functioning according...

View

Side number panel for Triumph (2016)

Side number panel for Triumph (2016) 2

-20%

Triumph

Side number panel for Triumph (2016)

€96.00 €120.00

Currently unavailable for sale Side number panel for Triumph (2016-...) manufactured out of aluminium. The number plate is placed on a side aluminium cover that comes to replace the original cover, with all the necessary screwing system. Available for Right or Left side, with the side cover in Brushed or Satin black finish. Made in France

View

Side number panel for Triumph (pre- 2016)

Side number panel for Triumph (pre- 2016) 2

-20%

Triumph

Side number panel for Triumph (pre- 2016)

€96.00 €120.00

Currently unavailable for sale Side number panel for Triumph (pre-2016 - air-cooled) manufactured out of aluminium. The number plate is placed on a side aluminium cover that comes to replace the original cover, with all the necessary stainless steel screwing system. Available for Right or Left side, with the side cover in Brushed or Satin black finish....

View

Side Number Plate Holder for Royal Enfield 650 Interceptor and Continental GT Satin Black

Side Number Plate Holder for Royal Enfield 650 Interceptor and Continental GT Satin Black 2

-20%

Interceptor / Continental GT 650

Side number panel Royal Enfield 650 Interceptor / Continental GT

€96.00 €120.00

Currently unavailable for sale Side number panel for Royal Enfield 650 Interceptor / Continental GT (2018-...) manufactured out of aluminium. The brushed number plate is placed on a side aluminium cover that comes to replace the original plastic one, with all the necessary screwing system. It will give a great Tracker look to your Royal Enfield Available...

View

Steering wheel cap for Austin Mini (1967-2000)

Steering wheel cap for Austin Mini (1967-2000) 2

-20%

Parts

Steering wheel cap for Austin Mini (1967-2000)

€71.20 €89.00

Aluminum Steering wheel cap for Austin Mini (1967-2000). It's suitable for 9 screws steering wheels (M4 screws - here mounted on a Moto Lita), the distance between two screws center is 35mm (1&3/8"). We consciously kept the aluminum cast finish raw, which gives a very special character to this steering wheel boss. All the stainless steel screws are...

Reinforced aluminium engine protection for Royal Enfield 650 Interceptor and Continental GT

Reinforced aluminium engine protection for Royal Enfield 650 Interceptor and Continental GT 2

-20%

Interceptor / Continental GT 650

Trail engine protection for Royal Enfield 650 Interceptor / Continental GT

€100.00 €125.00

Aluminium engine protection for Royal Enfield 650 Interceptor / Continental GT (2018-...). In addition to offering your Royal Enfield an adventurer look, this sump guard provides a real protection to your motorcycle in any situation. His 4mm thick aluminium structure is a bulwark against the terrain bumps that could his your engine block. Very easy to...

View

BAAK | Trail engine protection for Triumph T100/T120.

BAAK | Trail engine protection for Triumph T100/T120. 2

-20%

Parts

Trail engine protection for Triumph T100/T120

€116.00 €145.00

Aluminium engine protection for Triumph T100/T120 (2016-…) with an adventurer look and for the best protection.

1
2
3

Home