Best sellers

Showing 1-36 of 300 item(s)

Royal Enfield - interceptor - side covers - black

Royal Enfield - interceptor - side covers - black 2

Interceptor / Continental GT 650

Side covers for Royal Enfield 650 Interceptor / Continental GT

Aluminium side covers for Royal Enfield 650 Interceptor / Continental GT. These aluminium side covers are designed and manufactured by our craftsmen at the workshop. It comes in place of the original plastic side panels of your Interceptor or Continental GT 650, and will highly improve its finish level. Available for Left or right side, comes with all...

View

Motorcycle mirror under handlebars round ø8 in steel

Parts

Motorcycle mirror under handlebars round ø8 in steel

€45.00

Mini black Ø80mm bike mirror especially designed to be mounted below the handlebar in lower position. It offers a very discreet look and a good rear visibility with its wide angle glass. Available without adapter (for Ø8mm through shaft mounting or with adapter for ø22mm handlebars). Sold individually. Fit both left and right sides, available in satin...

View

Triumph

Engine protection for Triumph (2016-...)

€115.00

This sump guard / engine protection is manufactured out of stainless steel. It will give a stronger look to Triumph (2016-... - liquid-cooled). It's 1,5mm thick, and ensures a good protection to your engine against impacts and front wheel splashes. Available in Satin black or Brushed finish. It comes with all the necessary stainless steel screwing kit.

View

Parts

Mini LED turn signal mo.blaze Pin

€54.00

Motogadget LED mini indicator 3W minimalist design in aluminum with Ø8mm stem. When off, the indicators are almost invisible, yet they offer ideal brightness when in use. We use them on most of our custom builds. Each indicator is crimped in our workshop with Japanese terminals to simplify installation on your motorcycle. Indicator dimensions: 19.5mm x...

View

Moto Guzzi

Starter cover for Moto Guzzi V7 / V9

€55.00

Starter cover for Moto Guzzi V7 and V9. Manufactured out of aluminium, this starter cover is easy to assemble over the original part. It's available in Satin black (powder coated) or Brushed aluminium. This part is suitable for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9. Designed and manufactured by our team in France.

View

Moto Guzzi

Side Covers for Moto Guzzi V7 I & V7 II

€75.00

Easy to install, the cover replaces the original plastic side cover of your motorcycle. It enhances the finish of your Moto Guzzi. Sold individually, delivered with all the necessary stainless steel screws. Be sure to select both the left AND right sides if you want the pair.

View

Triumph

Side leather saddlebag for Triumph (2016)

€273.00

Side leather saddlebag for Triumph (2016-...). This saddlebag is handcrafted at our workshop in the same leather as our seats. It enables you to transport some stuff and gives a retro distinguished look to your bike. It's available in Aged brown, gold, black leather. Saddlebag measurements: 20cm x 20cm x 7cm. It comes mounting on a Brushed or Satin black...

View

Parts

Resistors for LED turn indicators

€15.00

Resistors for LED motorcycles turn indicators, essential to get a correct blinking speed once your LED blinkers are mounted on a motorcycle that isn't equipped with LED ones in stock configuration. Comes in pairs. You need two pairs to connect both front and rear turn signals on your motorcycle.

Triumph

Windscreen for Triumph 1200 Scrambler XE-XC

€96.00

You'll agree that on the Triumph Scrambler XE and XC, the rear part of the original speedometer lacks a refined finish... That's why we created this windscreen, available in brushed aluminum or satin black, both simple and elegant, specifically designed for this model. Our windscreen is specially designed to perfectly complement the original fenders of...

View

Parts

Leather cable guides

€8.00

Leather cable guide. This strap enables you fasten your cables, or tie it together to your handlebars. If just like us, your motorcycle's finish is part of your obsessions, this cable guide is perfect for your project. Available in Aged brown, Black and Gold leather. Available in 80mm, 90mm, 115mm or 130mm length. Each strap is 20mm wide. Sold as a...

View

Parts

BAAK N°1 handlebars Ø25,4mm

€159.00

Wide stainless steel BAAK N°1 handlebars in Ø25,4mm (1 inch). It's flatter, wider and has more pullback / sweep to the rider than most of the other handlebars. It will offer a very distinguished look to your motorcycle, and improve its handling qualities and your riding position. It's available in Satin black and Brushed finish. The stainless steel tubes...

View

Triumph

Classic aluminum side covers for Triumph (2016)

€75.00

Classic side covers for liquid cooled Triumph (2016-...) designed and handcrafted in aluminum in our workshop in France. It replaces your original plastic side covers to bring a strongest look to your motorcycle, using noble material. Available for both left and right side. Comes with all the necessary stainless steel hardware. Available in Brushed or...

View

Parts

Side covers for Moto Guzzi V7 850

€75.00

It comes to replace the stock plastic side cover of your motorcycle. The side panel will bring a better finish level to your Moto Guzzi, using noble material.

View

Parts

Round mirror ø8 steel for motorcycle

€39.00

Mini round mirror, Ø8cm diameter with M8 threading, for upper position. The mirror shaft is 13cm long, its shape was specifically designed to guaranty a good rear visibility and a discreet look. Suitable for motorcycles with M10 screwing original mirrors fixation. Sold by unit, available in satin black only. Fit both left and right sides.

View

Plate support for Royal Enfield 650 Interceptor / Continental GT

Plate support for Royal Enfield 650 Interceptor / Continental GT 2

Interceptor / Continental GT 650

License plate holder for Royal Enfield 650 Interceptor / Continental GT

€168.00

License plate holder for original Royal Enfield 650 Interceptor / Continental GT mudguard. Equipped with a taillight (CE approved), license plate lightning, compatible wiring harness and included turn indicators brackets to be mounted on your upper shock absorber axles or the license plate holder on choice. The EU approved LED taillight comes with its...

View

Triumph

Classic Medium front mudguard for Triumph

€120.00

Classic Medium front mudguard for Triumph, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled so you can easily fit it on the Triumph model of your choice. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, brushed and ready to...

View

Classic ø10 round aluminum motorcycle mirror

Parts

Classic ø10 round aluminum motorcycle mirror

€64.00

Classic round motorcycle mirror. This black mirror, Ø10cm / diameter, has an impeccable yet discreet finish. It offers perfect rearward visibility and fits any motorcycle. Height-adjustable thanks to 150mm articulated rod. Supplied with two adapters (left-hand and right-hand M10x1.25 mm). Additional adapters are available as options. Approved to European...

View

Aluminium handlebar grips for motocycles classic, vintage, cafe racer

Aluminium handlebar grips for motocycles classic, vintage, cafe racer 2

Parts

Motorcycle handlebar mounts, aluminum

€96.00

Machined aluminium handlebar clamps for motorcycle. These risers are available in ø22mm diameter, ø28,6mm diameter or 1 inch (ø25,4mm) diameter, it's lighter and elegant. The clamps are satin black powder coat painted, and come with stainless steel screwing (size on the choice). Designed and manufactured at BAAK's workshop. Made in France

View

Moto Guzzi V7 850/V9 Skid Plate - Stainless Steel, Brushed or Black Satin

Moto Guzzi V7 850/V9 Skid Plate - Stainless Steel, Brushed or Black Satin 2

Parts

Engine protection for Moto Guzzi V7 850 - V9 (Euro 5)

€99.00

Protect your Moto Guzzi V7 850, or V9 (Euro 5 Starting 2021) engine with this stainless steel skid plate. Available in two finishes: brushed or sleek satin black epoxy paint. Durable, stylish, and easy to install with all necessary mounting hardware included. It’s the perfect combo of looks and practicality, keeping your bike safe while turning heads....

View

Moto Guzzi

Classic rear mudguard for Moto Guzzi V7 / V7 850

€300.00

Classic rear mudguard for Moto Guzzi V7 I, V7 II, V7 III and V7 850, manufactured out of stainless steel. Shorter than your original rear mudguard, it has an elegant raw look thanks to the molded edge at its end. You will still keep good protection against the rear wheel projections. Equipped with a LED taillight (CE approved for road use) with license...

View

Round handlebar mirror ø10 HIGHSIDER MONTANA-SLIM EVO SHORT

Round handlebar mirror ø10 HIGHSIDER MONTANA-SLIM EVO SHORT 2

Parts

Round Bar End mirror ø10 HIGHSIDER MONTANA-SLIM EVO SHORT

€84.00

Looking for a discreet, high-performance mirror? The HIGHSIDER MONTANA-SLIM EVO SHORT is for you. With a thickness of just 5 mm, a black anodized aluminum design and convex glass for optimum visibility, this mirror combines style and safety. Easy to install on handlebars from 12 to 22 mm, it complies with E standards for left- or right-hand use.

Relocated ignition switch bracket for Royal Enfield 650 Interceptor / Continental GT

Interceptor / Continental GT 650

Relocated ignition switch bracket for Royal Enfield 650 Interceptor / Continental GT

€39.00

Ignition switch relocation kit for Royal Enfield 650 Interceptor / Continental GT (2018-...). this kit is necessary to relocate the ignition switch from its original position to under your injection system, on the right side of your Royal Enfield. It includes an inox bracket and the wiring harness extension. The relocation of your ignition switch...

Triumph

Headlight brackets for original headlight for Triumph (2016 )

€129.00

Headlight fixation brackets for Triumph original headlight (since 2016). This pair of lighthouse brackets come to replace the original ones and reveal the fork tubes. Suitable for the Triumph T120 / T100 Street Scrambler / Street Twin / Thruxton 1200 (since 2016) original headlights. The optional turn indicators brackets enable mount on the headlight...

View

Parts

Leather fork gaiters

€240.00

Pair of genuine leather fork gaiters. These 4, 5, 6 or 8 folds fork boots are handcrafted in France, and bring a touch of authenticity and exception to your motorcycle. It's water-repellent and especially designed to resist to an intensive use. Available in Aged brown, black, gold leather color. Diameter Ø41mm top and Ø63mm bottom. It comes in pairs with...

View

Aluminium turn indicators holders for license plate

Aluminium turn indicators holders for license plate 2

Parts

Turn indicators holders on license plate

€30.00

These aluminium turn indicators holders are designed to be assembled on a BAAK license plate holder, on the motorcycle of your choice. It's available in 3 different versions : For turn indicators with øM8 shafts For turn indicators with øM10 shafts For original / accessory Triumph turn indicators (2016-...) It comes with the necessary stainless steel...

View

Wide Flat Track handlebar kit for Royal Enfield 650 Interceptor

Wide Flat Track handlebar kit for Royal Enfield 650 Interceptor 2

Interceptor / Continental GT 650

Flat Track handlebars kit for Royal Enfield 650 Interceptor

€299.00

Flat Track Handlebar Kit for Royal Enfield 650 Interceptor / Continental GT 650 (2018-present). This kit includes: - a wide Flat Track steel handlebar (brushed or polished finish) - an extended brake line - a pair of long throttle cables - a long clutch cable - a pair of ø22mm handlebar risers With a wider handlebar that has more pullback towards the...

View

Bullet-type LED motorcycle turn indicators in black aluminum/brushed finish

Parts

Bullet-type LED motorcycle turn indicators in black aluminum/brushed finish

€78.00

Bullet-type motorcycle LED 10W turn signals in black aluminum with brushed trim combine elegance and efficiency. Featuring clear glass, they measure 20 mm in diameter and 36.5 mm in length. Mounting is simple, thanks to an M8mm screw fastener, and they are compatible with a 12 V system. Supplied sheathed and with ø3.2mm Japanese round crimped lugs....

View

Long cables kit for Royal Enfield 650 Interceptor / Continental GT

Interceptor / Continental GT 650

Long cables kit for Royal Enfield 650 Interceptor / Continental GT

€33.16

Long cables kit for Royal Enfield 650 Interceptor / Continental GT. This kit includes a long front brake hose, a pair of throttle cables and a clutch cable, all compatible with your motorcycle. It enables you mount a wider handlebar on your Royal Enfield. Each part of the kit can be purchased separately. The choice of variant (2024 - now) corresponds...

View

Front turn indicators brackets Royal Enfield 650 Interceptor / Continental GT

Front turn indicators brackets Royal Enfield 650 Interceptor / Continental GT 2

Interceptor / Continental GT 650

Front turn indicators brackets for Royal Enfield 650 Interceptor / Continental GT

€30.00

Front turn indicators brackets for Royal Enfield 650 Interceptor / Continental GT. Simple and very discreet, these brackets are satin black powder coat painted and enable you mount any universal turn indicator with a øM8 or øM10 fixation on your Royal Enfield. It gets assembled under your lower from triple trees. It comes in pairs, sold without turn...

View

Triumph

Rectifier bracket for Triumph (2016)

€45.00

Rectifier bracket for Triumph (2016-... - liquid-cooled). This bracket enables you to relocate your rectifier behind your engine oil cooler instead of the lower fork trees to lighten the front of your bike. Manufactured out of stainless steel laser cut. You'll be obliged to relocate your wiring harness under your gas tank. Comes with all the necessary...

Bike stand raiser for Royal Enfield 650 Interceptor / Continental GT

Interceptor / Continental GT 650

Bike stand raiser for Royal Enfield 650 Interceptor / Continental GT

€66.00

Say goodbye to excessive lean on your Royal Enfield 650 Interceptor or Continental GT (2018-...) This kickstand extends the length of your original kickstand by 20 mm. Perfect for bikes with upgraded shocks or large tires, this machined aluminum accessory finished in satin black epoxy is durable and elegant. Made in France

Radiator guard for Triumph (2016-...) T120 - T100 - Speed Twin 900

Parts

Radiator guard for Triumph (2016)

€84.00

Protect your Triumph Bonneville (2016-...) radiator with this high-quality stainless steel guard, coated in premium satin black epoxy paint. Designed to last, it offers optimal protection without compromising engine cooling. Comes with stainless steel mounting hardware. Made in France

Moto Guzzi

Leather gas tank strap for Moto Guzzi V7III / V7 850 / V9

€135.00

Leather gas tank strap / belt for Moto Guzzi V7 III, V7 850 and V9. This strap enables you wrap your gas tank and give it a classy look. It's easy to assemble and as it simply wraps the gas tank and gets adjusted using the adjustment buckle on the nylon strap. Make sure to correctly choose your model of motorcycle so it perfectly fits. It's available in...

View

Home

T-shirt Welcome BAAK "Ivory"

€29.00

T-shirt "Welcome BAAK" Ivory. This t-shirt is THE essential basic of the collection. It's manufactured out of bio cotton and has a Slim cut. The BAAK logo is embroidered on the chest. It's marine blue color with the white BAAK logo. It's mixed, both Him and Her will proudly wear it. Size S is more suitable for a child aged 12-14

View

License plate holder for Triumph Bobber original mudguard (2017)

Bonneville Bobber (2017 -...)

License plate holder for Triumph Bobber original mudguard (2017)

€180.00

License plate holder for the original mudguard of the Triumph Bonneville Bobber (2017-...). This taillight / license plate support unit comes in place of the original part. It's equipped with an EU approved LED vintage taillight with LED integrated license plate lightning, a license plate triangle, a plug & play wiring harness, optional turn...

View

Triumph

Front mudguard fixation brackets for Triumph (2016)

€45.00

Front mudguard fixation brackets for Triumph (2016-... - liquid-cooled) manufactured out of stainless steel. The fixation brackets enable you adjust the height of your front fender, while guiding the cables along the fork. It particularly useful if you change the diameter of your front wheel. Comes in pair, with stainless steel screws kit, without...

View