Best sellers

Showing 1-12 of 18 item(s)

Motorcycle mirror under handlebars round ø8 in steel

Motorcycle mirror under handlebars round ø8 in steel 2

-15%

Parts

Motorcycle mirror under handlebars round ø8 in steel

$44.91 $52.83

Mini black Ø80mm bike mirror especially designed to be mounted below the handlebar in lower position. It offers a very discreet look and a good rear visibility with its wide angle glass. Available without adapter (for Ø8mm through shaft mounting or with adapter for ø22mm handlebars). Sold individually. Fit both left and right sides, available in satin...

View

Leather cable guides

Leather cable guides 2

-20%

Parts

Leather cable guides

$7.52 $9.40

Leather cable guide. This strap enables you fasten your cables, or tie it together to your handlebars. If just like us, your motorcycle's finish is part of your obsessions, this cable guide is perfect for your project. Available in Aged brown, Black and Gold leather. Available in 80mm, 90mm, 115mm or 130mm length. Each strap is 20mm wide. Sold as a...

View

BAAK N°1 handlebars Ø25,4mm

BAAK N°1 handlebars Ø25,4mm 2

-20%

Parts

BAAK N°1 handlebars Ø25,4mm

$149.34 $186.68

Wide stainless steel BAAK N°1 handlebars in Ø25,4mm (1 inch). It's flatter, wider and has more pullback / sweep to the rider than most of the other handlebars. It will offer a very distinguished look to your motorcycle, and improve its handling qualities and your riding position. It's available in Satin black and Brushed finish. The stainless steel tubes...

View

Aluminium handlebar grips for motocycles classic, vintage, cafe racer

Aluminium handlebar grips for motocycles classic, vintage, cafe racer 2

-20%

Parts

Motorcycle handlebar mounts, aluminum

$90.17 $112.71

Machined aluminium handlebar clamps for motorcycle. These risers are available in ø22mm diameter, ø28,6mm diameter or 1 inch (ø25,4mm) diameter, it's lighter and elegant. The clamps are satin black powder coat painted, and come with stainless steel screwing (size on the choice). Designed and manufactured at BAAK's workshop. Made in France

View

Round mirror ø8 steel for motorcycle

Round mirror ø8 steel for motorcycle 2

-15%

Parts

Round mirror ø8 steel for motorcycle

$38.92 $45.79

Mini round mirror, Ø8cm diameter with M8 threading, for upper position. The mirror shaft is 13cm long, its shape was specifically designed to guaranty a good rear visibility and a discreet look. Suitable for motorcycles with M10 screwing original mirrors fixation. Sold by unit, available in satin black only. Fit both left and right sides.

View

Relocated ignition switch bracket for Royal Enfield 650 Interceptor / Continental GT

Relocated ignition switch bracket for Royal Enfield 650 Interceptor / Continental GT 2

-20%

Interceptor / Continental GT 650

Relocated ignition switch bracket for Royal Enfield 650 Interceptor / Continental GT

$36.63 $45.79

Ignition switch relocation kit for Royal Enfield 650 Interceptor / Continental GT (2018-...). this kit is necessary to relocate the ignition switch from its original position to under your injection system, on the right side of your Royal Enfield. It includes an inox bracket and the wiring harness extension. The relocation of your ignition switch...

Relocated ignition switch control bracket for Triumph (2016)

Relocated ignition switch control bracket for Triumph (2016) 2

-20%

Triumph

Relocated ignition switch control bracket for Triumph (2016)

$28.18 $35.22

Ignition switch control relocation bracket for Triumph (2016-... - liquid-cooled). It enables to relocate the ignition switch control under the gas tank. Manufactured in inox laser cut. You'll be obliged to relocate your wiring harness under your gas tank. Comes with all the necessary stainless steel screwing. The relocation of your ignition switch...

Headlight brackets for original headlight for Interceptor 650

Headlight brackets for original headlight for Interceptor 650 2

-20%

Interceptor / Continental GT 650

Headlight brackets for original headlight for Interceptor 650

$121.17 $151.46

Headlight fixation brackets for Royal Enfield 650 Interceptor and Continental GT 650. This pair of headlight brackets is mounted to replace the original ones. Compatible with bulb or LED headlights. Suitable if you keep the original key switch. If you opt for our flat fork crown with relocated key switch, you can fit our small 60mm headlight brackets....

View

Relocated ignition switch control bracket kit for Triumph (pre- 2016)

Relocated ignition switch control bracket kit for Triumph (pre- 2016) 2

-20%

Triumph

Relocated ignition switch control bracket kit for Triumph (pre- 2016)

$46.02 $57.53

Relocated ignition switch control bracket for Triumph (pre-2016 - air-cooled). This simple ignition switch support enables you to relocate the ignition control between the fuel tank and the left carburetor. Fits on the right side on the injection models (EFI). It requires to move the wiring harness that is in your headlight, under the gas tank, without...

Handlebar clamps for Royal Enfield 650 Interceptor / Continental GT

Handlebar clamps for Royal Enfield 650 Interceptor / Continental GT 2

-20%

Interceptor / Continental GT 650

Handlebar clamps for Royal Enfield 650 Interceptor / Continental GT

$90.17 $112.71

Machined aluminium handlebar clamps for Royal Enfield 650 Interceptor / Continental GT. These risers are available in ø22mm diameter, ø28,6mm diameter or 1 inch (ø25,4mm) diameter, it's lighter and elegant. The clamps are satin black powder coat painted, and come with all the stainless steel screwing kit compatible with your motorcycle. Designed and...

View

Tiny Motogadget speedo fixation bracket for Triumph (pre- 2016)

Tiny Motogadget speedo fixation bracket for Triumph (pre- 2016) 2

-20%

Triumph

Tiny Motogadget speedo fixation bracket for Triumph (pre- 2016)

$46.02 $57.53

Tiny Motogadget speedometer fixation bracket for Triumph (pre-2016). It's a machined aluminium bracket, satin black powder coated. This part comes with all the necessary screwing.

View

Medium front mudguard for Moto Guzzi V7

Medium front mudguard for Moto Guzzi V7 2

-20%

Moto Guzzi

Medium front mudguard for Moto Guzzi V7

$154.98 $193.72

Medium front mudguard for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9, manufactured out of stainless steel. It's short but it's still long enough to protect you from the front wheel splashes. It's pre-drilled so it fits the original fixation system of your motorcycle. It's designed and manufactured by our team at the workshop in France. It's available...

View

1
2

Home