Best sellers

Showing 1-24 of 162 item(s)

Motorcycle mirror under handlebars round ø8 in steel

Motorcycle mirror under handlebars round ø8 in steel 2

-15%

Parts

Motorcycle mirror under handlebars round ø8 in steel

€38.25 €45.00

Mini black Ø80mm bike mirror especially designed to be mounted below the handlebar in lower position. It offers a very discreet look and a good rear visibility with its wide angle glass. Available without adapter (for Ø8mm through shaft mounting or with adapter for ø22mm handlebars). Sold individually. Fit both left and right sides, available in satin...

View

Royal Enfield - interceptor - side covers - black

Royal Enfield - interceptor - side covers - black 2

-20%

Interceptor / Continental GT 650

Side covers for Royal Enfield 650 Interceptor / Continental GT

€60.00 €75.00

Aluminium side covers for Royal Enfield 650 Interceptor / Continental GT. These aluminium side covers are designed and manufactured by our craftsmen at the workshop. It comes in place of the original plastic side panels of your Interceptor or Continental GT 650, and will highly improve its finish level. Available for Left or right side, comes with all...

View

Engine protection for Triumph (2016-…) Protect Your Bike in Style!

-20%

Triumph

Engine protection for Triumph (2016-...)

€92.00 €115.00

This sump guard / engine protection is manufactured out of stainless steel. It will give a stronger look to Triumph (2016-... - liquid-cooled). It's 1,5mm thick, and ensures a good protection to your engine against impacts and front wheel splashes. Available in Satin black or Brushed finish. It comes with all the necessary stainless steel screwing kit.

View

-20%

Moto Guzzi

Side Covers for Moto Guzzi V7 I & V7 II

€60.00 €75.00

Easy to install, the cover replaces the original plastic side cover of your motorcycle. It enhances the finish of your Moto Guzzi. Sold individually, delivered with all the necessary stainless steel screws. Be sure to select both the left AND right sides if you want the pair.

View

-20%

Parts

Leather cable guides

€6.40 €8.00

Leather cable guide. This strap enables you fasten your cables, or tie it together to your handlebars. If just like us, your motorcycle's finish is part of your obsessions, this cable guide is perfect for your project. Available in Aged brown, Black and Gold leather. Available in 80mm, 90mm, 115mm or 130mm length. Each strap is 20mm wide. Sold as a...

View

-20%

Parts

BAAK N°1 handlebars Ø25,4mm

€127.20 €159.00

Wide stainless steel BAAK N°1 handlebars in Ø25,4mm (1 inch). It's flatter, wider and has more pullback / sweep to the rider than most of the other handlebars. It will offer a very distinguished look to your motorcycle, and improve its handling qualities and your riding position. It's available in Satin black and Brushed finish. The stainless steel tubes...

View

Aluminium side covers for Triumph (2016-...)

-20%

Triumph

Classic aluminum side covers for Triumph (2016)

€60.00 €75.00

Classic side covers for liquid cooled Triumph (2016-...) designed and handcrafted in aluminum in our workshop in France. It replaces your original plastic side covers to bring a strongest look to your motorcycle, using noble material. Available for both left and right side. Comes with all the necessary stainless steel hardware. Available in Brushed or...

View

Aluminium handlebar grips for motocycles classic, vintage, cafe racer

Aluminium handlebar grips for motocycles classic, vintage, cafe racer 2

-20%

Parts

Motorcycle handlebar mounts, aluminum

€76.80 €96.00

Machined aluminium handlebar clamps for motorcycle. These risers are available in ø22mm diameter, ø28,6mm diameter or 1 inch (ø25,4mm) diameter, it's lighter and elegant. The clamps are satin black powder coat painted, and come with stainless steel screwing (size on the choice). Designed and manufactured at BAAK's workshop. Made in France

View

-15%

Parts

Round mirror ø8 steel for motorcycle

€33.15 €39.00

Mini round mirror, Ø8cm diameter with M8 threading, for upper position. The mirror shaft is 13cm long, its shape was specifically designed to guaranty a good rear visibility and a discreet look. Suitable for motorcycles with M10 screwing original mirrors fixation. Sold by unit, available in satin black only. Fit both left and right sides.

View

Plate support for Royal Enfield 650 Interceptor / Continental GT

Plate support for Royal Enfield 650 Interceptor / Continental GT 2

-20%

Interceptor / Continental GT 650

License plate holder for Royal Enfield 650 Interceptor / Continental GT

€134.40 €168.00

License plate holder for original Royal Enfield 650 Interceptor / Continental GT mudguard. Equipped with a taillight (CE approved), license plate lightning, compatible wiring harness and included turn indicators brackets to be mounted on your upper shock absorber axles or the license plate holder on choice. The EU approved LED taillight comes with its...

View

Classic Medium front mudguard for Triumph

-20%

Triumph

Classic Medium front mudguard for Triumph

€96.00 €120.00

Classic Medium front mudguard for Triumph, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled so you can easily fit it on the Triumph model of your choice. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, brushed and ready to...

View

Round handlebar mirror ø10 HIGHSIDER MONTANA-SLIM EVO SHORT

Round handlebar mirror ø10 HIGHSIDER MONTANA-SLIM EVO SHORT 2

Parts

Round Bar End mirror ø10 HIGHSIDER MONTANA-SLIM EVO SHORT

€84.00

Looking for a discreet, high-performance mirror? The HIGHSIDER MONTANA-SLIM EVO SHORT is for you. With a thickness of just 5 mm, a black anodized aluminum design and convex glass for optimum visibility, this mirror combines style and safety. Easy to install on handlebars from 12 to 22 mm, it complies with E standards for left- or right-hand use.

Classic ø10 round aluminum motorcycle mirror

Parts

Classic ø10 round aluminum motorcycle mirror

€64.00

Classic round motorcycle mirror. This black mirror, Ø10cm / diameter, has an impeccable yet discreet finish. It offers perfect rearward visibility and fits any motorcycle. Height-adjustable thanks to 150mm articulated rod. Supplied with two adapters (left-hand and right-hand M10x1.25 mm). Additional adapters are available as options. Approved to European...

View

Moto Guzzi

Classic rear mudguard for Moto Guzzi V7 / V7 850

€300.00

Classic rear mudguard for Moto Guzzi V7 I, V7 II, V7 III and V7 850, manufactured out of stainless steel. Shorter than your original rear mudguard, it has an elegant raw look thanks to the molded edge at its end. You will still keep good protection against the rear wheel projections. Equipped with a LED taillight (CE approved for road use) with license...

View

Headlight brackets for original headlight for Triumph (2016 )

-20%

Triumph

Headlight brackets for original headlight for Triumph (2016 )

€103.20 €129.00

Headlight fixation brackets for Triumph original headlight (since 2016). This pair of lighthouse brackets come to replace the original ones and reveal the fork tubes. Suitable for the Triumph T120 / T100 Street Scrambler / Street Twin / Thruxton 1200 (since 2016) original headlights. The optional turn indicators brackets enable mount on the headlight...

View

Relocated ignition switch bracket for Royal Enfield 650 Interceptor / Continental GT

Relocated ignition switch bracket for Royal Enfield 650 Interceptor / Continental GT 2

-20%

Interceptor / Continental GT 650

Relocated ignition switch bracket for Royal Enfield 650 Interceptor / Continental GT

€31.20 €39.00

Ignition switch relocation kit for Royal Enfield 650 Interceptor / Continental GT (2018-...). this kit is necessary to relocate the ignition switch from its original position to under your injection system, on the right side of your Royal Enfield. It includes an inox bracket and the wiring harness extension. The relocation of your ignition switch...

Parts

Leather fork gaiters

€240.00

Pair of genuine leather fork gaiters. These 4, 5, 6 or 8 folds fork boots are handcrafted in France, and bring a touch of authenticity and exception to your motorcycle. It's water-repellent and especially designed to resist to an intensive use. Available in Aged brown, black, gold leather color. Diameter Ø41mm top and Ø63mm bottom. It comes in pairs with...

View

Wide Flat Track handlebar kit for Royal Enfield 650 Interceptor

Wide Flat Track handlebar kit for Royal Enfield 650 Interceptor 2

Interceptor / Continental GT 650

Flat Track handlebars kit for Royal Enfield 650 Interceptor

€299.00

Flat Track Handlebar Kit for Royal Enfield 650 Interceptor / Continental GT 650 (2018-present). This kit includes: - a wide Flat Track steel handlebar (brushed or polished finish) - an extended brake line - a pair of long throttle cables - a long clutch cable - a pair of ø22mm handlebar risers With a wider handlebar that has more pullback towards the...

View

-20%

Triumph

Rectifier bracket for Triumph (2016)

€36.00 €45.00

Rectifier bracket for Triumph (2016-... - liquid-cooled). This bracket enables you to relocate your rectifier behind your engine oil cooler instead of the lower fork trees to lighten the front of your bike. Manufactured out of stainless steel laser cut. You'll be obliged to relocate your wiring harness under your gas tank. Comes with all the necessary...

Long cables kit for Royal Enfield 650 Interceptor / Continental GT

Interceptor / Continental GT 650

Long cables kit for Royal Enfield 650 Interceptor / Continental GT

€33.16

Long cables kit for Royal Enfield 650 Interceptor / Continental GT. This kit includes a long front brake hose, a pair of throttle cables and a clutch cable, all compatible with your motorcycle. It enables you mount a wider handlebar on your Royal Enfield. Each part of the kit can be purchased separately. The choice of variant (2024 - now) corresponds...

View

License plate holder for Triumph Bobber original mudguard (2017)

License plate holder for Triumph Bobber original mudguard (2017) 2

-20%

Bonneville Bobber (2017 -...)

License plate holder for Triumph Bobber original mudguard (2017)

€144.00 €180.00

License plate holder for the original mudguard of the Triumph Bonneville Bobber (2017-...). This taillight / license plate support unit comes in place of the original part. It's equipped with an EU approved LED vintage taillight with LED integrated license plate lightning, a license plate triangle, a plug & play wiring harness, optional turn...

View

Front mudguard fixation brackets for Triumph (2016)

-20%

Triumph

Front mudguard fixation brackets for Triumph (2016)

€36.00 €45.00

Front mudguard fixation brackets for Triumph (2016-... - liquid-cooled) manufactured out of stainless steel. The fixation brackets enable you adjust the height of your front fender, while guiding the cables along the fork. It particularly useful if you change the diameter of your front wheel. Comes in pair, with stainless steel screws kit, without...

View

Parts

Mirror adapter

€15.00

Handlebar adapters, required to mount some mirrors on your handlebar. We offer two different solutions : Adapter for ø22mm handlebars, to mount our mirrors in underbar position (M10 threading) Through rod type adapter, to mount a mirror on a through rod type fixation in classic or underbar position

View

Relocated ignition switch control bracket for Triumph (2016)

-20%

Triumph

Relocated ignition switch control bracket for Triumph (2016)

€24.00 €30.00

Ignition switch control relocation bracket for Triumph (2016-... - liquid-cooled). It enables to relocate the ignition switch control under the gas tank. Manufactured in inox laser cut. You'll be obliged to relocate your wiring harness under your gas tank. Comes with all the necessary stainless steel screwing. The relocation of your ignition switch...