Best sellers

Showing 73-96 of 159 item(s)

Classic Mini front mudguard for Moto Guzzi

Classic Mini front mudguard for Moto Guzzi 2

Moto Guzzi

Classic Mini front mudguard for Moto Guzzi

Classic Mini front mudguard for Moto Guzzi V7 I, V7 II, V7 III and V7 850, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled so it fits the original fixation system of your motorcycle. It's designed and manufactured by our team at the workshop in France. It's available in satin black,...

View

Monza type tank cap for motorcycle guzzi v7iii / v9

Monza type tank cap for motorcycle guzzi v7iii / v9 2

Moto Guzzi

Monza gas cap for Moto Guzzi V7III / V9

Monza gas cap for Moto Guzzi V7 III and V9. The timeless design of this Monza cap will perfectly suit your gas tank thanks to our adapter. The full kit is composed by the polished aluminium gas cap, a seal, the necessary mounting hardware and the adapter. It doesn't have any lock system and simply opens by pushing on the opening button. It is only...

Aluminium intake cover for Triumph 900 (2016-...)

Aluminium intake cover for Triumph 900 (2016-...) 2

Triumph

Intake covers for Triumph 900 (2016)

Pair of aluminium intake covers for Triumph (2016-...). These covers come in place of the original ones to give a better aesthetic look to your motorcycle. It's suitable for Triumph Street Twin / Street Cup and Bonneville T100 (2016-...). It comes by pair. It's available in Satin black and Brushed finish. It comes with all the necessary mounting...

View

Short leather seat kit for Triumph (pre- 2016)

Short leather seat kit for Triumph (pre- 2016) 2

Triumph

Short leather seat kit for Triumph (pre- 2016)

Short leather seat kit for Triumph (before 2016 - air-cooled). This leather seat kit enables you shorten the rear end of the motocycle to reach a more compact look while keeping two seatings to bring a passenger. No welding required. It comes with assembly instructions. Comes with: Machined aluminium short subframe system Genuine short leather seat...

View

Aluminum Side Covers for Triumph Scrambler 1200 X/XC/XE - Improved Heat Protection and Dynamic Look

Aluminum Side Covers for Triumph Scrambler 1200 X/XC/XE - Improved Heat Protection and Dynamic Look 2

Scrambler 1200 x/xc/xe

Side covers (for original high exhaust system) Triumph Scrambler 1200 X/XC/XE

Optimize your Triumph Scrambler 1200 X/XC/XE with these aluminum side covers specially designed for the original high exhaust line. They not only improve heat protection but also add a dynamic touch to your motorcycle. These covers allow you to replace the original plastic parts with a more robust and aesthetic solution. Easy to install, they fit directly...

View

License plate holder for US format with light mount

License plate holder for US format with light mount 2

Parts

License plate holder for US format with light mount

This license plate holder is suitable for US size license plates (horizontal). It's manufactured out of 3mm thick aluminium and it's satin black powder coat painted. This support allows you to mount a license plate light. This part is only suitable for BAAK license plate holders.

Handlebar controls kit by BAAK

Handlebar controls kit by BAAK 2

Universal

Universal handlebars controls kit

This Universal handlebars controls kit is essential to clear your cockpit. Each part of the kit must be purchased separately : Brake master cylinder Throttle Clutch lever This kit designed by our craftsmen shows a perfect finish level thanks to his assembly quality and satin black powder coat painting. These parts are available for classic and vintage...

View

BAAK License plate lightning

BAAK License plate lightning 2

Parts

License plate lightning

LED license plate lightning. This LED license plate lightning is approved according to the ECE European standards (12V / 2W). We use it on some license plate holders manufactured at BAAK's. Measurement of the license plate lightning : Length 17mm Diameter 12mm øM8 fixation shaft.

Bates headlight bracket for Royal Enfield 650 Interceptor / Continental GT

Interceptor / Continental GT 650

Bates headlight bracket for Royal Enfield 650 Interceptor / Continental GT

Bates headlight fixation bracket for Royal Enfield 650 Interceptor / Continental GT, required to mount a lower fixation headlight (Bates style) on your motorcycle. Manufactured out of aluminium, 3mm thick, black powder coat painting. Available in black finish only. This bracket comes with all the necessary stainless steel screwing.

Side license plate holder for Triumph

Side license plate holder for Triumph 2

Triumph

Side license plate holder for Triumph

Side license plate support / holder for Triumph. It attaches to the upper axis of the left shock absorber. It comes with a connection wiring harness that makes it 100% plug and play. Satin black powder coat painting finish. If you choose the optional turn indicators, we'll provide the potential resistors necessary for their proper functioning according...

View

Classic headlight with integrated speedometer for Triumph before 2016

Classic headlight with integrated speedometer for Triumph before 2016 2

Triumph

Classic Headlight / Integrated Speedometer for Triumph (pre-2016)

Classic headlight with integrated speedometer for Triumph (before 2016 – air-cooled) This needle speedometer, integrated into a Ø180mm satin black metal headlight with M8 side mounts, is the ideal way to visually lighten the front of your bike while retaining advanced speedometer functionalities. This speedometer is offered in a plug & play version,...

View

Wide fork triple trees kit for Triumph T100-T120 (2016)

Wide fork triple trees kit for Triumph T100-T120 (2016) 2

Triumph

Wide fork triple trees kit for Triumph T100-T120 (2016)

Wide fork triple yokes kit for Triumph Bonneville T100 / T120 (2016-... - liquid-cooled), it enables you mount a wide front tire (3.50). The kit includes the upper and lower triple trees 20mm wider, the lower bearing, the brake discs struts, the handlebar clamps and the wheel axle. Enable to lower the front end by 25mm. This kit is used on our Triumph...

View

Front fender Medium for Moto Guzzi

Front fender Medium for Moto Guzzi 2

Moto Guzzi

Front fender Medium for Moto Guzzi

Front fender Medium for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9, made of stainless steel. It is short but long enough to protect you from splashes from the front wheel. It is pre-drilled to fit the original fender mounting system. Designed and manufactured by our craftsmen in our workshop in France. Dimensions: 410x125 mm.Made in France

View

US license plate holder with tail light support

US license plate holder with tail light support 2

Parts

US license plate holder with tail light support

This license plate holder is suitable for US format license plates (horizontal 170x100mm). It's made of 3mm thick aluminum, painted in satin black epoxy paint. This bracket must be purchased in addition to the original fender license plate support to convert it to fit USA plates. It's compatible with this Vintage Tail Light. Made in France

Front mudguard risers kit for Royal Enfield 650 Interceptor / Continental GT

Front mudguard risers kit for Royal Enfield 650 Interceptor / Continental GT 2

Interceptor / Continental GT 650

Front mudguard risers kit for Royal Enfield 650 Interceptor / Continental GT

Risers kit for Royal Enfield 650 Interceptor / Continental GT front mudguard. This 4 screws and 4 aluminium struts enable you to lift up your front mudguard by 10mm if you plan to mount a wider and higher tire on your Royal Enfield 650 Interceptor / Continental GT. Suitable for your original mudguard. The struts must be mounted between your original...

Bates headlight plate for Triumph (pre-2016)

Bates headlight plate for Triumph (pre-2016) 2

Triumph

Bates headlight plate for Triumph (pre-2016)

Bates type headlight plate for Triumph (pre- 2016 - air-cooled). Essential to hide the steering column and all the cables after the mounting of a Bates headlight. Comes with 4 black leather clamps in black, aged brown, gold or ruby color. Available in satin black and raw aluminium finish. Measurements : 220mm x 190mm.

View

Mini front mudguard for Moto Guzzi

Mini front mudguard for Moto Guzzi 2

Moto Guzzi

Mini front mudguard for Moto Guzzi

Mini front mudguard for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9, manufactured out of stainless steel. This front fender is very short, it enables you visually lighten the front of your motorcycle. It's pre-drilled so it fits the original fixation system of your motorcycle. It's designed and manufactured by our team at the workshop in France. It's...

View

Classic rear mudguard for Triumph (pre- 2016)

Classic rear mudguard for Triumph (pre- 2016) 2

Triumph

Classic rear mudguard for Triumph (pre- 2016)

Classic rear mudguard for Triumph (pre-2016 - air-cooled) manufactured out of stainless steel. Shorter than your original Triumph rear mudguard, it has an elegant raw look thanks to the molded edge at its end. You will still keep good protection against the rear wheel projections. Equipped with a LED taillight (CE approved for road use) with license...

View

Rear mudguard wiring harness for Triumph

Rear mudguard wiring harness for Triumph 2

Triumph

Rear mudguard wiring harness for Triumph

Rear mudguard wiring harness for Triumph. This wiring harness is necessary to connect an aftermarket set of turn indicators and taillight on your Triumph. It's plug & play over the factory connector, just make sure to select the right model. Comes standard with all the mudguards we sell for Triumph. Manufactured at BAAK's workshop in France.

View

Monza type tank cap for Triumph

Monza type tank cap for Triumph 2

Triumph

Monza gas cap for Triumph

Monza gas cap for Triumph Modern Classics. The timeless design of this Monza cap will perfectly suit your gas tank thanks to our adapter. Only suitable for Triumph Modern Classics: Air cooled (2000-2016) and new Liquid Cooled (since 2016). The full kit is composed by the polished aluminium gas cap, a seal, the necessary mounting hardware and the adapter....

Rear Footpeg Mounting Plate for Royal Enfield 650

Royal Enfield

Rear Footpeg Mounting Plate for Royal Enfield 650

Designed to move the passenger foot pegs forward and down, making room for the installation of large saddlebags while increasing passenger comfort without interfering with the rider. This is a sturdy stainless steel plate with a satin black epoxy coating.

Front-turn-indicators-bracket-Triumph-Bobber-1200

Front-turn-indicators-bracket-Triumph-Bobber-1200 2

Parts

Front turn indicators bracket for Triumph Bobber 1200

Turn signals brackets kit to relocate the indicators Triumph Bobber 1200 to visually lighten your motorcycle. The bracket comes on your oil-cooler.

View

Air Vents for Land Rover Defender

Air Vents for Land Rover Defender 2

Land Rover Defender

Air Vents for Land Rover Defender

The air vents for the Land Rover Defender complement our range of Defender body accessories. They offer a superior alternative to the original plastic vents (air intake vents, heater grille). Designed by our Design department and engineering team, they allow you to personalize your Defender. They give your vehicle a unique character: rugged yet classic at...

View

Land Rover Defender Headlight Surround

Land Rover Defender Headlight Surround 2

Land Rover Defender

Headlight Surrounds for Land Rover Defender

The headlight surrounds for the Land Rover Defender complement our range of Defender body accessories, particularly the BAAK grille.They give it a unique character: rugged yet classic at the same time. The smooth surface and elongated lines of these parts result from a clean design, in harmony with the Defender’s timeless look. They are carefully crafted...

View

1
…
3
4
5
…
7