Best sellers

Showing 73-108 of 300 item(s)

Classic aluminum side covers for Triumph Speed Twin / Thruxton 1200

Home

Classic aluminum side covers for Triumph Speed Twin / Thruxton 1200

Classic side covers for liquid cooled Triumph (2016-...) designed and handcrafted in aluminum in our workshop in France. It replaces your original plastic side covers to bring a strongest look to your motorcycle, using noble material. Available for both left and right side. Comes with all the necessary stainless steel hardware. Available in Brushed or...

View

Triumph

Rectifier / turn indicators / horn bracket for Triumph (pre- 2016)

€49.00

This bracket enables you to relocate your rectifier, front turn indicators and horn on a Triumph (pre-2016 - air-cooled) below your steering column. It visually lightens the line of the front of your motorcycle by grouping these parts on one bracket. This bracket is 21,8cm wide and 12cm high. It get assembled in the original place of your horn, under the...

Triumph

Front turn indicators bracket for Triumph

€30.00

Front turn indicators bracket / support for Triumph is simple, effective and very discreet. It enables you relocate your turn indicators under the steering column. It's stainless steel laser cut and satin black powder coated. It's particularly suitable for our Rectifier bracket for Triumph, or can be tightened on the upper fixation of the oil cooling...

View

Triumph

Front mudguard fixation brackets for Triumph (pre- 2016)

€45.00

These stainless steel mudguard fixation bracket enables you to assemble the front fender of your choice on your Triumph Bonneville, Scrambler and Thruxton (before 2016 - air-cooled). They allow to adjust the height of the mudguard, it gets assembled on the original mudguard fixation. Product delivered by pairs.Made in France

Triumph

Big Body shock absorbers for Triumph (pre- 2016)

€711.60

We designed these aluminum shocks in order to give a stronger look and a better shocks absorption to the Triumph Bonneville, Thruxton and Scrambler 865. It's adjustable in hydraulic compression and rebound thanks to a single knob, which makes it really easy to use, even while riding. It's the largest shock absorbers you can find for these Triumph models...

View

Parts

Wire Splitter

€9.60

The wire splitter provides you with an additional connection point. Compatible with all BAAK wiring harnesses.

Bouchon plat de réservoir pour triumph 2

Parts

Flat fuel tank cap for Triumph

€58.00

Black finish only, without locking system. Made with a black anodized treatment for long-lasting durability and impeccable style. This product was carefully selected by the BAAK workshop team for its elegant look and superior quality. It is easily installed as a direct replacement for the original cap.

Royal Enfield

Rear turn indicators brackets for Royal Enfield

€30.00

Rear turn indicators holders for Royal Enfield. This pair of aluminium brackets will let you mount your turn indicators on the upper shock absorbers axles so it remains discreet. It's satin black high quality powder-coated so it resists over the years. Make sure to select the right model of motorcycle so you receive the holders that are suitable for your...

View

Moto Guzzi

Rear turn indicators brackets for Moto Guzzi

€30.00

Rear turn signals bracket for Moto Guzzi. Enables you to mount your blinkers / indicators on the upper shock absorber axles for a more discreet look. Comes in pairs. This part is available for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9.

View

Triumph

Side number panel for Triumph (2016)

€120.00

Currently unavailable for sale Side number panel for Triumph (2016-...) manufactured out of aluminium. The number plate is placed on a side aluminium cover that comes to replace the original cover, with all the necessary screwing system. Available for Right or Left side, with the side cover in Brushed or Satin black finish. Made in France

View

Parts

Classic headlight

€90.00

Round headlight for classic motorcycles, with M8 side mount and ø180mm diameter. It features metal casing and bezel, with plastic glass, offering an exceptional level of finish. Its streamlined casing gives it a resolutely classic look. Depending on the motorcycle model chosen, a plug and play harness is supplied (which may justify a price difference...

View

Moto Guzzi

Classic Medium front mudguard for Moto Guzzi

€120.00

Classic Medium front mudguard for Moto Guzzi V7 I, V7 II, V7 III and V7 850, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled so it fits the original fixation system of your motorcycle. It's designed and manufactured by our team at the workshop in France. It's available in satin black,...

View

Parts

Headlight struts

€22.00

Motorcycle headlight struts, manufactured out of aluminum, to perfectly adjust the position of your headlight. The hole diameter is ø8mm, the exterior diameter is ø29mm. For Moto Guzzi V7 Classic or Heritage headlight, choose the 10mm ones. For Triumph and Royal Enfield Classic or Heritage headlight, choose the 5mm ones. Comes in pairs.

View

Home

T-shirt of the Month - BAAK

€29.99

Ultra-Limited July Edition. Dispatch from 1 July.

View

Classic Mini front mudguard for Royal Enfield 650 Interceptor / Continental GT

Interceptor / Continental GT 650

Classic Mini front mudguard for Royal Enfield 650 Interceptor / Continental GT

€108.00

Classic Mini front mudguard for Royal Enfield 650 Interceptor / Continental GT (2018-...), manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. We drill holes on this mudguard so it fits your motorcycle. This mudguard is available without or with risers kit (+10mm) if you want to mount a bigger tire on the...

View

Home

T-shirt BAAK Pocket "BMW"

€29.00

T-shirt "BAAK Pocket" BMW. This t-shirt is manufactured out of biologic cotton. It has a pocket on the left side of the chest with a black embroidered pattern, and our BMW NineT Bobber silk-screen printed on the back. This t-shirt has a Slim cut, the fabric is white color. It's mixed, both Him and Her will proudly wear it. Size S is more suitable for a...

View

License plate holder for Royal Enfield Classic / Bullet original mudguard

Bullet / Classic (2008- ..)

License plate holder for Royal Enfield Classic / Bullet original mudguard

€168.00

Discreet license plate holder for Royal Enfield Classic / Bullet 500 original mudguard. It's equipped with a ø70mm EU approved taillight with integrated license plate lightning, a plug & play wiring harness, turn indicators brackets on choice and optional turn indicators. This part comes in place of your original taillight / license plate holder unit....

View

Parts

Bates headlight bracket

€30.00

Fixation bracket for Bates headlight, required to assemble a headlight with a lower position fixation on your motorcycle. Manufactured out of aluminium, 4mm thick, black powder coat painted. Ø6mm between axes holes, adjustable from 68mm to 95mm Ø10mm headlight fixing holes

Triumph

Relocated ignition switch control bracket kit for Triumph (pre- 2016)

€49.00

Relocated ignition switch control bracket for Triumph (pre-2016 - air-cooled). This simple ignition switch support enables you to relocate the ignition control between the fuel tank and the left carburetor. Fits on the right side on the injection models (EFI). It requires to move the wiring harness that is in your headlight, under the gas tank, without...

Parts

Bates headlight

€75.00

Bates headlight for motorcycle. This low fixation Bates style headlight is ø15cm diameter. It has a metal casing and trim ring. It's discreet and enables you get a better finish level on your motorcycle. It's available in Chromed, Satin Black or with Black casing and Brushed or Chromed trim ring. It comes with the fixation bracket designed for the model...

View

Triumph

Original turn indicators brackets kit for Triumph (2016)

€30.00

Turn signals brackets kit to relocate the factory or accessories indicators from Triumph that have keyed connection, to visually lighten your motorcycle. The front bracket comes on your oil-cooler, and the rear brackets come on the shock absorbers axles. These bracket kit comes without turn indicators.

View

Triumph

Heritage rear mudguard for Triumph (pre- 2016)

€360.00

Heritage rear mudguard for Triumph (pre-2016 - air-cooled) manufactured out of stainless steel. It's shorter than your original Triumph rear mudguard, but it respects the original Triumph lines making it visually lighter, while keeping a good protection against the rear wheel projections. Equipped with a LED taillight (CE approved for road use) with...

View

Moto Guzzi

Rear mudguard wiring harness for Moto Guzzi

€19.00

Rear mudguard wiring harness for Moto Guzzi. This wiring harness is essential to connect an aftermarket set of turn indicators and taillight on your Moto Guzzi. It's plug & play over the factory connector. This parts fit the Moto Guzzi V7, V7 II, V7 III, V7 850 and V9. It's available in Short and Long size. Subject to the right wiring length on your...

View

Turn indicators wiring harness for Triumph (2016-...)

Parts

Turn indicators wiring harness for Triumph (2016)

€29.00

This turn indicators wiring harness is necessary to fit new turn signals on your Triumph (2016-... I liquid cooled) without having to splice wires. This 160mm (6 &19/64") long wiring harness is plug and play on the original connectors of your motorcycle. This 160mm (6 &19/64") long wiring harness is perfect to achieve the assembly of aftermarket...

Parts

Exhaust wrap

€93.60

Here are 15 meters (or 49') of exhaust wrap, 5 cm wide (1'' & 31/32), to wrap up your exhaust system and get the BAD BOY look you're aiming at! For the black color thermal wrap, we highly recommend you to paint it with an high temperature paint so the color can resist over the months. Available in Black or Beige color. This is high quality part,...

View

Parts

H4 Yellow bulb

€12.00

Yellow H4 bulb for motorcycle lighthouse. This bulb adapts to any lighthouse equipped with an original H4 bulb. It allows you to provide the lighting of your machine with a resolutely vintage appearance, without affixing a filter on the window of your headlight. This product preserves the lighting qualities of your machine, to be favored with respect to...

Home

Triangle Side Covers for T120

€75.00

Give your Triumph T120 a bolder character with these aluminum side covers. They replace the original plastic covers and elegantly hide the airbox while enhancing the classic style of your bike. Available in brushed or satin black finish, these covers are sold individually (right or left side) and come with all necessary mounting hardware. Made in France,...

View

Parts

VANS 25.4mm Handlebar Grips

€28.80

Vans handlebar grips, right and left, for motorcycles. Featuring the classic waffle sole pattern of Vans® and constructed from ODI's exclusive grip compounds. For handlebars with a 25.4mm (1 inch) diameter, also available below in ø22mm. Sold in pairs.

Rear Fender Eliminator Kit Triumph 2016-...

Parts

Rear Fender Eliminator Kit Triumph 2016-...

€240.00

Looking to streamline the rear of your Triumph Bonneville T100/T120, ST900, or Scrambler 900? This fender eliminator kit with a license plate holder allows you to completely remove the original rear fender. Made from aluminum and stainless steel, the kit comes with a homologated LED taillight and license plate illumination. A plug-and-play adapter...

View

Royal Enfield

Rear Brake Master Cylinder Protection for Royal Enfield 650

€36.00

Protect your rear brake master cylinder while adding an aesthetic touch to your Royal Enfield 650 with this robust and stylish protection. Available in a brushed or satin black finish, this inox protection is designed to withstand the elements and impacts.

View

Leather dye, perfect for motorcycle seats

Leather dye, perfect for motorcycle seats 2

Parts

Leather dye cream

€24.00

This leather dye cream is a maintenance solution. It penetrates the leather and gives it a deep black tint. You can use it for your saddles but also for any other leather product: shoes, jackets, gloves, saddlebags, etc. Capacity: 200 ml. It's available for Black, Gold, Brown and Ruby (red) leather.Should be applied with a cloth, mixed with our...

View

Short exhaust for Royal Enfield 650 Interceptor / Continental GT

Interceptor / Continental GT 650

Short exhaust for Royal Enfield 650 Interceptor / Continental GT

€960.00

Short exhaust line for Royal Enfield 650 Interceptor / Continental GT (2018-...), designed and manufactured by our craftsmen in France. The manifolds are stainless steel, the mufflers are aluminium. It provides a stronger and deeper sound than the original exhaust, but remains discreet. Despite the huge care we brought to making it discreet, it's not...

View

Triumph

Classic Mini front mudguard for Triumph

€108.00

Classic Mini front mudguard for Triumph, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. We drill holes on this mudguard according to the model of Triumph you choose. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black, brushed and...

View

Side leather saddlebag for Triumph Thruxton 1200 and Speed Twin

Side leather saddlebag for Triumph Thruxton 1200 and Speed Twin 2

Speed Twin 1200 (2019 -...)

Side leather saddlebag for Triumph Thruxton 1200 / Speed Twin (2016)

€273.00

Side leather saddlebag for Triumph Thruxton 1200 / Thruxton R / Speed Twin (2016-...). This side bag is handcrafted at our workshop using the same leather as on our seats. It enables you transport some stuff and gives a retro distinguished look to your Triumph. It's available in Aged brown, gold, black leather. Saddlebag measurements: 20cm x 20cm x 7cm....

View

Triumph

License plate holder kit for Triumph Thruxton 1200 / Speed Twin 1200

€210.00

Fender Eliminator Kit for Triumph Thruxton 1200 and Speed Twin Euro 4 / Euro 5 (2016 – …). This satin black aluminum undertray visually lightens the rear of your Triumph and gives it a more radical look. This kit includes a LED taillight (CE approved) with license plate lightning, a license plate holder on choice (side or classic position), turn...

View

Handlebar clamps for Royal Enfield 650 Interceptor / Continental GT

Interceptor / Continental GT 650

Handlebar clamps for Royal Enfield 650 Interceptor / Continental GT

€96.00

Machined aluminium handlebar clamps for Royal Enfield 650 Interceptor / Continental GT. These risers are available in ø22mm diameter, ø28,6mm diameter or 1 inch (ø25,4mm) diameter, it's lighter and elegant. The clamps are satin black powder coat painted, and come with all the stainless steel screwing kit compatible with your motorcycle. Designed and...

View