Best sellers

Showing 25-48 of 139 item(s)

Harness for adaptable indicator Royal Enfield

Harness for adaptable indicator Royal Enfield 2

Parts

Harness for adaptable indicator Royal Enfield

This indicator wiring harness is essential for adapting new indicators to your Royal Enfield. The harness is plug & play with the original connectors of your motorcycle. This 160 mm harness is ideal for installing aftermarket indicators mounted on Japanese cylindrical male connectors ranging from ø3.2 mm to 3.7 mm.Made in France by BAAK.Sold in pairs.

Classic rear mudguard for Royal Enfield 650 Interceptor / Continental GT

Classic rear mudguard for Royal Enfield 650 Interceptor / Continental GT 2

-20%

Interceptor / Continental GT 650

Classic rear mudguard for Royal Enfield 650 Interceptor / Continental GT

€240.00 €300.00

Classic rear mudguard for Royal Enfield 650 Interceptor / Continental GT, manufactured out of stainless steel at our workshop in France. Shorter than your original rear mudguard, it has an elegant raw look thanks to the molded edge at its end. You will still keep good protection against the rear wheel projections. Equipped with a LED taillight (CE...

Rectifier / turn indicators / horn bracket for Triumph (pre- 2016)

Rectifier / turn indicators / horn bracket for Triumph (pre- 2016) 2

-30%

Triumph

Rectifier / turn indicators / horn bracket for Triumph (pre- 2016)

€34.30 €49.00

This bracket enables you to relocate your rectifier, front turn indicators and horn on a Triumph (pre-2016 - air-cooled) below your steering column. It visually lightens the line of the front of your motorcycle by grouping these parts on one bracket. This bracket is 21,8cm wide and 12cm high. It get assembled in the original place of your horn, under the...

Relocated ignition switch control bracket for Triumph (2016)

Relocated ignition switch control bracket for Triumph (2016) 2

-35%

Triumph

Relocated ignition switch control bracket for Triumph (2016)

€19.50 €30.00

Ignition switch control relocation bracket for Triumph (2016-... - liquid-cooled). It enables to relocate the ignition switch control under the gas tank. Manufactured in inox laser cut. You'll be obliged to relocate your wiring harness under your gas tank. Comes with all the necessary stainless steel screwing. The relocation of your ignition switch...

Front turn indicators bracket for Moto Guzzi V7 / V9

Front turn indicators bracket for Moto Guzzi V7 / V9 2

-35%

Moto Guzzi

Front turn indicators bracket for Moto Guzzi V7 / V9

€19.50 €30.00

Front turn indicators fixation bracket for Moto Guzzi V7 and V9, simple, effective and very discreet. It's stainless steel laser cut and satin black powder coat painted. It gets assembled on the upper regulator screw of your motorcycle. Sold without blinkers.

Classic Rear Mudguard for Triumph (2016 - …) Elevate Your Bike!

Classic Rear Mudguard for Triumph (2016 - …) Elevate Your Bike! 2

-10%

Triumph

Classic rear mudguard for Triumph (2016 )

€270.00 €300.00

Time left

Classic rear mudguard for Triumph (2016 - liquid-cooled) manufactured out of stainless steel. Shorter than your original rear mudguard, it has an elegant raw look thanks to the molded edge at its end. You will still keep good protection against the rear wheel projections. Equipped with a LED Bates taillight (CE approved for road use) with license plate...

Classic Moto Headlight Protection Grille - Universal

Classic Moto Headlight Protection Grille - Universal 2

-30%

Parts

Classic Headlight Protection Grid - Universal

€63.00 €90.00

Stainless steel headlight grille with satin black epoxy coating. Perfectly fits our Classic headlight but can also be adapted to many OEM and aftermarket headlights (180mm diameter).

Bouchon plat de réservoir pour triumph

Bouchon plat de réservoir pour triumph 2

-30%

Parts

Flat fuel tank cap for Triumph

€40.60 €58.00

Black finish only, without locking system. Made with a black anodized treatment for long-lasting durability and impeccable style. This product was carefully selected by the BAAK workshop team for its elegant look and superior quality. It is easily installed as a direct replacement for the original cap.

Engine protection for Royal Enfield 650 Interceptor / Continental GT

Engine protection for Royal Enfield 650 Interceptor / Continental GT 2

-35%

Interceptor / Continental GT 650

Engine protection for Royal Enfield 650 Interceptor / Continental GT

€74.75 €115.00

Engine protection / sump guard for Royal Enfield 650 Interceptor / Continental GT (2018-...). It will give a stronger look to Royal Enfield while protection the bottom of your engine against impacts and front wheels splashes. It's manufactured out of 1,5mm thick stainless steel. Available in Satin black or Brushed finish. It comes with all the necessary...

Classic Mini front mudguard for Royal Enfield 650 Interceptor / Continental GT

Classic Mini front mudguard for Royal Enfield 650 Interceptor / Continental GT 2

-20%

Interceptor / Continental GT 650

Classic Mini front mudguard for Royal Enfield 650 Interceptor / Continental GT

€86.40 €108.00

Classic Mini front mudguard for Royal Enfield 650 Interceptor / Continental GT (2018-...), manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. We drill holes on this mudguard so it fits your motorcycle. This mudguard is available without or with risers kit (+10mm) if you want to mount a bigger tire on the...

Rectifier bracket for Triumph (2016)

Rectifier bracket for Triumph (2016) 2

-35%

Triumph

Rectifier bracket for Triumph (2016)

€29.25 €45.00

Rectifier bracket for Triumph (2016-... - liquid-cooled). This bracket enables you to relocate your rectifier behind your engine oil cooler instead of the lower fork trees to lighten the front of your bike. Manufactured out of stainless steel laser cut. You'll be obliged to relocate your wiring harness under your gas tank. Comes with all the necessary...

Front turn indicators bracket for Triumph

Front turn indicators bracket for Triumph 2

-35%

Triumph

Front turn indicators bracket for Triumph

€19.50 €30.00

Front turn indicators bracket / support for Triumph is simple, effective and very discreet. It enables you relocate your turn indicators under the steering column. It's stainless steel laser cut and satin black powder coated. It's particularly suitable for our Rectifier bracket for Triumph, or can be tightened on the upper fixation of the oil cooling...

Front mudguard fixation brackets for Triumph (pre- 2016)

Front mudguard fixation brackets for Triumph (pre- 2016) 2

-40%

Triumph

Front mudguard fixation brackets for Triumph (pre- 2016)

€27.00 €45.00

These stainless steel mudguard fixation bracket enables you to assemble the front fender of your choice on your Triumph Bonneville, Scrambler and Thruxton (before 2016 - air-cooled). They allow to adjust the height of the mudguard, it gets assembled on the original mudguard fixation. Product delivered by pairs.Made in France

Short exhaust for Triumph (2016-2024)

Short exhaust for Triumph (2016-2024) 2

Triumph

Short exhaust for Triumph (2016-2024)

Short Exhaust Line for Triumph T100 - T120 - Street Twin - Speed Twin 900 - Thruxton 1200 - Speed Twin 1200 (from 2016, liquid-cooled), designed and manufactured in our workshop. The headers are made of stainless steel, and the silencers are aluminum. This exhaust line delivers a deep, resonance-free sound that is not too loud. It is easy to install,...

Short leather seat kit for Triumph (2016)

Short leather seat kit for Triumph (2016) 2

Triumph

Short leather seat kit for Triumph (2016)

Short leather seat kit for Triumph (2016-... - liquid-cooled). It enables you reduce the original seat length to get a more compact look and the elegance of a leather seat while keeping two seatings. It comes with: Machined aluminium short subframe system (no welding) Genuine short leather seat Stainless steel mudguard with plate holder and bates...

Short rear mudguard for Triumph (2016 - …)

Short rear mudguard for Triumph (2016 - …) 2

-20%

Triumph

Heritage rear mudguard for Triumph (2016 )

€288.00 €360.00

Heritage rear mudguard for Triumph (2016 - liquid-cooled) manufactured out of stainless steel. It's shorter than your original mudguard, but it respect the original Triumph lines making it visually lighter, while keeping a good protection against the rear wheel projections. Equipped with a LED taillight (CE approved for road use) with integrated license...

Turn indicators / Brake light

Turn indicators / Brake light 2

Parts

Turn indicators / Brake light

These minimalism aluminum turn signals keep your motorcycle clean. The rear indicators incorporate stop lights and lights. The front indicators are classic. Light is powerful. Stem øM8, 38mm long, ø22mm optical.

Rear turn indicators brackets for Royal Enfield by BAAK

Rear turn indicators brackets for Royal Enfield by BAAK 2

-40%

Royal Enfield

Rear turn indicators brackets for Royal Enfield

€18.00 €30.00

Rear turn indicators holders for Royal Enfield. This pair of aluminium brackets will let you mount your turn indicators on the upper shock absorbers axles so it remains discreet. It's satin black high quality powder-coated so it resists over the years. Make sure to select the right model of motorcycle so you receive the holders that are suitable for your...

BAAK black aluminium headlight brackets for motorcycles

BAAK black aluminium headlight brackets for motorcycles 2

-35%

Parts

Universal short headlight clamps for classic motorcycles

€83.85 €129.00

Headlight bracket for motorcycles, for M8 side headlight fixation, with optional front turn indicators holders. Designed and manufactured at BAAK's in France. Perfect to put a BAAK headlight on your motorcycle and improve its finish level. Ø39 - 40mm for Moto Guzzi V7I / V7 II / V7 III / V7 850 / V9 (60mm size) Ø41 - 42mm for Triumph Bonneville T100 / SE...

Bates headlight bracket for Royal Enfield 650 Interceptor / Continental GT

-35%

Interceptor / Continental GT 650

Bates headlight bracket for Royal Enfield 650 Interceptor / Continental GT

€16.25 €25.00

Bates headlight fixation bracket for Royal Enfield 650 Interceptor / Continental GT, required to mount a lower fixation headlight (Bates style) on your motorcycle. Manufactured out of aluminium, 3mm thick, black powder coat painting. Available in black finish only. This bracket comes with all the necessary stainless steel screwing.

Rear turn indicators brackets for Moto Guzzi

Rear turn indicators brackets for Moto Guzzi 2

-35%

Moto Guzzi

Rear turn indicators brackets for Moto Guzzi

€19.50 €30.00

Rear turn signals bracket for Moto Guzzi. Enables you to mount your blinkers / indicators on the upper shock absorber axles for a more discreet look. Comes in pairs. This part is available for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9.

Classic Mini front mudguard for Moto Guzzi

Classic Mini front mudguard for Moto Guzzi 2

-20%

Moto Guzzi

Classic Mini front mudguard for Moto Guzzi

€86.40 €108.00

Classic Mini front mudguard for Moto Guzzi V7 I, V7 II, V7 III and V7 850, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled so it fits the original fixation system of your motorcycle. It's designed and manufactured by our team at the workshop in France. It's available in satin black,...

Short rear mudguard for Triumph (pre- 2016)

Short rear mudguard for Triumph (pre- 2016) 2

-20%

Triumph

Heritage rear mudguard for Triumph (pre- 2016)

€288.00 €360.00

Heritage rear mudguard for Triumph (pre-2016 - air-cooled) manufactured out of stainless steel. It's shorter than your original Triumph rear mudguard, but it respects the original Triumph lines making it visually lighter, while keeping a good protection against the rear wheel projections. Equipped with a LED taillight (CE approved for road use) with...

Classic aluminum side covers for Triumph Speed Twin / Thruxton 1200

Classic aluminum side covers for Triumph Speed Twin / Thruxton 1200 2

-35%

Home

Classic aluminum side covers for Triumph Speed Twin / Thruxton 1200

€48.75 €75.00

Classic side covers for liquid cooled Triumph (2016-...) designed and handcrafted in aluminum in our workshop in France. It replaces your original plastic side covers to bring a strongest look to your motorcycle, using noble material. Available for both left and right side. Comes with all the necessary stainless steel hardware. Available in Brushed or...

1
2
3
…
6