Products

Showing 1-36 of 37 item(s)

Classic Medium front mudguard for BMW NineT

Classic Medium front mudguard for BMW NineT 2

-15%

Bmw

Classic Medium front mudguard for BMW NineT

€242.25 €285.00

Time left

Classic Medium front mudguard for BMW NineT, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled, comes with its satin black powder coated fixation bracket suitable for the selected model and the stainless steel screws required. It's designed and manufactured by our team at the workshop in...

Classic rear mudguard for BMW NineT

Classic rear mudguard for BMW NineT 2

-15%

Bmw

Classic rear mudguard for BMW NineT

€318.75 €375.00

Time left

Classic rear mudguard for BMW R 1200 NineT manufactured out of stainless steel. It has an elegant raw look thanks to the molded edge at its end. You will still keep good protection against the rear wheel projections. Equipped with a LED taillight (CE approved for road use) with license plate lightning, a rear license plate holder, rear turn indicators...

Classic Mini front mudguard for BMW NineT

Classic Mini front mudguard for BMW NineT 2

-15%

Bmw

Classic Mini front mudguard for BMW NineT

€242.25 €285.00

Time left

Classic Mini front mudguard for BMW R 1200 NineT, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled, comes with its satin black powder coated fixation bracket suitable for the selected model and the stainless steel screws required. It's designed and manufactured by our team at the...

Medium front mudguard for BMW NineT

Medium front mudguard for BMW NineT 2

-15%

Bmw

Medium front mudguard for BMW NineT

€242.25 €285.00

Time left

Medium front mudguard for BMW R 1200 NineT, manufactured out of stainless steel. It's short but it's still long enough to protect you from the front wheel splashes. It's pre-drilled, comes with its satin black powder coated fixation bracket suitable for the selected model and the stainless steel screws required. It's designed and manufactured by our team...

Mini front mudguard for BMW NineT

Mini front mudguard for BMW NineT 2

-15%

Bmw

Mini front mudguard for BMW NineT

€242.25 €285.00

Time left

Mini front mudguard for BMW R 1200 NineT, manufactured out of stainless steel. This front fender is very short, it enables you visually lighten the front of your NineT. It's pre-drilled, comes with its satin black powder coated fixation bracket suitable for the selected model and the stainless steel screws required. It's designed and manufactured by our...

Scrambler front mudguard for BMW NineT

Scrambler front mudguard for BMW NineT 2

-15%

Bmw

Scrambler front mudguard for BMW NineT

€242.25 €285.00

Time left

High front fender for BMW R NineT 1200. This Scrambler look front mudguard is handcrafted out of stainless steel, and gets assembled on the lower triple trees of your BMW NineT thanks to the provided fixation bracket. It offers a good protection and a strong off road look to your motorcycle. Available in Glossy black, Satin black, Brushed and Polished...

Aluminium wheel arch for BMW R 1200 NineT by BAAK

Aluminium wheel arch for BMW R 1200 NineT by BAAK 2

-15%

Bmw

Aluminium wheel arch for BMW NineT

€106.25 €125.00

Time left

Aluminium wheel arch for BMW R 1200 NineT. This wheel arch enables you get a perfect finish result once your rear fender is removed. It's equipped with a LED taillight, it comes with its plug & play wiring harness for taillight, and its fixation kit. It's satin black powder coat painted so it can resist over the years. Suitable for BMW R NineT...

Bates headlight plate for BMW NineT

Bates headlight plate for BMW NineT 2

-15%

Bmw

Bates headlight plate for BMW NineT

€143.65 €169.00

Time left

Headlight plate for Bates headlight for BMW R NineT. This aluminium plate enables to hide the steering column and the cables after the assembly of a Bates headlight on your NineT. Handcrafted out of aluminium, it's available in Satin black or Raw aluminium finish. Compatible with a Bates headlight or the original headlight. The leather fixation collars...

Speedometer lowering kit for BMW NineT

Speedometer lowering kit for BMW NineT 2

-15%

Bmw

Speedometer lowering kit for BMW NineT

€18.70 €22.00

Time left

Lowering kit for BMW NineT speedometer. These 4 struts enable you lower your original NineT speedometer by 10mm, to get a clear riding post. Suitable for BMW NineT Pure, Scrambler, Racer and Urban GS.

View

Batte headlight fixing for Moto Guzzi V9

Batte headlight fixing for Moto Guzzi V9 2

-15%

V9 (2016 -...)

Bates headlight bracket for Moto Guzzi V9

€21.25 €25.00

Time left

Bates headlight fixation bracket for Moto Guzzi V9, required to mount a lower fixation headlight (Bates style) on your motorcycle. Manufactured out of aluminium, 3mm thick, black powder coat painting. Available in black finish only. This is the bracket included in our Bates headlight kit for Moto Guzzi V9. This bracket comes with all the necessary...

Medium front mudguard for Moto Guzzi V7

Medium front mudguard for Moto Guzzi V7 2

-15%

Moto Guzzi

Medium front mudguard for Moto Guzzi V7

€140.25 €165.00

Time left

Medium front mudguard for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9, manufactured out of stainless steel. It's short but it's still long enough to protect you from the front wheel splashes. It's pre-drilled so it fits the original fixation system of your motorcycle. It's designed and manufactured by our team at the workshop in France. It's available...

Mini front mudguard for Moto Guzzi

Mini front mudguard for Moto Guzzi 2

-15%

Moto Guzzi

Mini front mudguard for Moto Guzzi

€140.25 €165.00

Time left

Mini front mudguard for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9, manufactured out of stainless steel. This front fender is very short, it enables you visually lighten the front of your motorcycle. It's pre-drilled so it fits the original fixation system of your motorcycle. It's designed and manufactured by our team at the workshop in France. It's...

Rear turn indicators brackets for Moto Guzzi

Rear turn indicators brackets for Moto Guzzi 2

-15%

Moto Guzzi

Rear turn indicators brackets for Moto Guzzi

€25.50 €30.00

Time left

Rear turn signals bracket for Moto Guzzi. Enables you to mount your blinkers / indicators on the upper shock absorber axles for a more discreet look. Comes in pairs. This part is available for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9.

Front turn indicators bracket for Moto Guzzi V7 / V9

Front turn indicators bracket for Moto Guzzi V7 / V9 2

-15%

Moto Guzzi

Front turn indicators bracket for Moto Guzzi V7 / V9

€25.50 €30.00

Time left

Front turn indicators fixation bracket for Moto Guzzi V7 and V9, simple, effective and very discreet. It's stainless steel laser cut and satin black powder coat painted. It gets assembled on the upper regulator screw of your motorcycle. Sold without blinkers.

Side license plate holder for Moto Guzzi

Side license plate holder for Moto Guzzi 2

-15%

Moto Guzzi

Side license plate holder for Moto Guzzi

€80.75 €95.00

Time left

License plate support / holder for Moto Guzzi. This part gets attached on the left upper shock absorber axis. It comes with a plug & play wiring harness. This support is satin black powder coat painted. If you choose the optional turn indicators, we'll provide the wiring harness and potential resistors necessary for their proper functioning according...

License plate holder for Moto Guzzi V9 original mudguard

License plate holder for Moto Guzzi V9 original mudguard 2

-15%

V9 (2016 -...)

License plate holder for Moto Guzzi V9 original mudguard

€142.80 €168.00

Time left

License plate holder for Moto Guzzi V9 original rear mudguard. This satin black powder coat painted part comes in place of your original taillight unit. It is composed of a license plate holder, a round LED taillight (EU approved)with plate lightning, a pair of turn indicators brackets on choice, a plug & play wiring harness and optional turn...

Headlight struts

Headlight struts 2

-15%

Parts

Headlight struts

€18.70 €22.00

Time left

Motorcycle headlight struts, manufactured out of aluminum, to perfectly adjust the position of your headlight. The hole diameter is ø8mm, the exterior diameter is ø29mm. For Moto Guzzi V7 Classic or Heritage headlight, choose the 10mm ones. For Triumph and Royal Enfield Classic or Heritage headlight, choose the 5mm ones. Comes in pairs.

Universal Classic rear mudguard

Universal Classic rear mudguard 2

-15%

Parts

Universal Classic rear mudguard

€255.00 €300.00

Time left

Classic Universal rear mudguard manufactured out of stainless steel. Shorter than your original rear mudguard, it has an elegant raw look thanks to the molded edge at its end. You will still keep good protection against the rear wheel projections. Equipped with a LED taillight (CE approved for road use) with license plate lightning and a license plate...

Universal Classic Medium front mudguard

Universal Classic Medium front mudguard 2

-15%

Parts

Universal Classic Medium front mudguard

€96.90 €114.00

Time left

Universal Classic Medium front mudguard, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's not pre-drilled so you can fit it on any model of motorcycle. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black, brushed and ready to...

Universal Classic Mini front mudguard

Universal Classic Mini front mudguard 2

-15%

Parts

Universal Classic Mini front mudguard

€86.70 €102.00

Time left

Universal Classic Mini front mudguard, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's not pre-drilled so you can fit it on the motorcycle of your choice. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black, brushed and ready...

Universal Medium front mudguard

Universal Medium front mudguard 2

-15%

Parts

Universal Medium front mudguard

€96.90 €114.00

Time left

Universal Medium front mudguard, manufactured out of stainless steel. It's short but it's still long enough to protect you from the front wheel splashes. It's not pre-drilled so you can fit it on any model of motorcycle. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black, brushed...

Headlight brackets for original headlights V7 III / V7 850 / V9

Headlight brackets for original headlights V7 III / V7 850 / V9 2

-15%

Parts

Headlight brackets for original headlights Moto Guzzi V7 III / V7 850 / V9

€109.65 €129.00

Time left

Enhance the look of your Moto Guzzi V7 III, V7 850 or V9 with these machined aluminum headlight clamps, compatible with original LED and bulb headlights. With a length of 60 mm and 39-40 mm mounting clamps, they also allow the installation of adaptable turn signals. Finished in satin-black epoxy, they are supplied in pairs with stainless steel screws...

Universal Mini front mudguard

Universal Mini front mudguard 2

-15%

Parts

Universal Mini front mudguard

€96.90 €114.00

Time left

Universal Mini front mudguard, manufactured out of stainless steel. This front fender is very short, it enables you visually lighten the front of your motorcycle. It's not pre-drilled so you can fit it on any model of motorcycle. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black,...

Leather cable guides

Leather cable guides 2

-15%

Parts

Leather cable guides

€6.80 €8.00

Time left

Leather cable guide. This strap enables you fasten your cables, or tie it together to your handlebars. If just like us, your motorcycle's finish is part of your obsessions, this cable guide is perfect for your project. Available in Aged brown, Black and Gold leather. Available in 80mm, 90mm, 115mm or 130mm length. Each strap is 20mm wide. Sold as a...

Round mirror ø8 steel for motorcycle

Round mirror ø8 steel for motorcycle 2

-15%

Parts

Round mirror ø8 steel for motorcycle

€33.15 €39.00

Time left

Mini round mirror, Ø8cm diameter with M8 threading, for upper position. The mirror shaft is 13cm long, its shape was specifically designed to guaranty a good rear visibility and a discreet look. Suitable for motorcycles with M10 screwing original mirrors fixation. Sold by unit, available in satin black only. Fit both left and right sides.

Aluminium handlebar grips for motocycles classic, vintage, cafe racer

Aluminium handlebar grips for motocycles classic, vintage, cafe racer 2

-15%

Parts

Motorcycle handlebar mounts, aluminum

€81.60 €96.00

Time left

Machined aluminium handlebar clamps for motorcycle. These risers are available in ø22mm diameter, ø28,6mm diameter or 1 inch (ø25,4mm) diameter, it's lighter and elegant. The clamps are satin black powder coat painted, and come with stainless steel screwing (size on the choice). Designed and manufactured at BAAK's workshop. Made in France

Motorcycle mirror under handlebars round ø8 in steel

Motorcycle mirror under handlebars round ø8 in steel 2

-15%

Parts

Motorcycle mirror under handlebars round ø8 in steel

€38.25 €45.00

Time left

Mini black Ø80mm bike mirror especially designed to be mounted below the handlebar in lower position. It offers a very discreet look and a good rear visibility with its wide angle glass. Available without adapter (for Ø8mm through shaft mounting or with adapter for ø22mm handlebars). Sold individually. Fit both left and right sides, available in satin...

Universal gas tank leather belt

Universal gas tank leather belt 2

-15%

Parts

Universal gas tank leather belt

€107.10 €126.00

Time left

Universal leather gas tank strap / belt, fits with any gas tank with the cap on the side. It gives a distinguished look to your motorcycle tank and protects it from scratches. It comes wrapping your gas tank, is easy to assemble and is adjustable thanks to a metal buckle fastener. Maximum length 190cm, minimum length 107cm. This genuine leather tank...

Leather handlebar pad for motorcycle (black, brown, red, gold)

Leather handlebar pad for motorcycle (black, brown, red, gold) 2

-15%

Parts

Leather handlebar pad

€63.75 €75.00

Time left

Leather-covered handlebar pad. Appart from the protection brought by this pad in case of shock with your handlebar, his leather cover will bring a classic off road look to your motorcycle. Our craftsmen re-interpreted the codes of off road bar pads to give it an aesthetic use. The inner diameter for the crossbar is ø12mm, the external diameter of the pad...

BAAK black aluminium headlight brackets for motorcycles

BAAK black aluminium headlight brackets for motorcycles 2

-15%

Parts

Universal short headlight clamps for classic motorcycles

€109.65 €129.00

Time left

Headlight bracket for motorcycles, for M8 side headlight fixation, with optional front turn indicators holders. Designed and manufactured at BAAK's in France. Perfect to put a BAAK headlight on your motorcycle and improve its finish level. Ø39 - 40mm for Moto Guzzi V7I / V7 II / V7 III / V7 850 / V9 (60mm size) Ø41 - 42mm for Triumph Bonneville T100 / SE...

Large Leather Messenger Bag

Large Leather Messenger Bag 2

-15%

Parts

Large Leather Messenger Bag

€762.45 €897.00

Time left

Discover our removable leather satchel, an exceptional piece meticulously handcrafted by our French artisans. Every detail is painstakingly executed, bearing witness to our commitment to quality. This exquisite leather goods creation is crafted from BAAK's top-quality vegetable-tanned leathers. Delivered with an adjustable and detachable strap, this...

Large Leather Roll Top Pannier

Large Leather Roll Top Pannier 2

-15%

Parts

Large Leather Roll Top Pannier

€762.45 €897.00

Time left

Large Leather Roll Top pannier, carefully handcrafted by our leather worker for people who need pannier on their motorcycle but appreciate fine material and craftsmanship. The Rolled Top pannier is compatible with all SW-Motech SLC side carriers. (side carrier not supplied). Very detailed, this beautiful leather bag is made with BAAK leathers and suede...

Removable windshield for BMW Nine T Pure and Scrambler

Removable windshield for BMW Nine T Pure and Scrambler 2

-15%

Parts

Removable windshield for BMW Nine T Pure and Scrambler

€693.60 €816.00

Time left

For BMW Nine T Pure or Scrambler, this retro-touring removable windscreen is the perfect accessory for everyday use or long-distance travel.Easy to remove in 2 seconds without tools, it leaves just four discreet brackets. Please note that it is not compatible with the original headlight, but only with our Bates headlight, to be ordered separately....

Moto Guzzi V7 850/V9 Skid Plate - Stainless Steel, Brushed or Black Satin

Moto Guzzi V7 850/V9 Skid Plate - Stainless Steel, Brushed or Black Satin 2

-15%

Parts

Engine protection for Moto Guzzi V7 850 - V9 (Euro 5)

€84.15 €99.00

Time left

Protect your Moto Guzzi V7 850, or V9 (Euro 5 Starting 2021) engine with this stainless steel skid plate. Available in two finishes: brushed or sleek satin black epoxy paint. Durable, stylish, and easy to install with all necessary mounting hardware included. It’s the perfect combo of looks and practicality, keeping your bike safe while turning heads....

Leather gas tank belt for Moto Guzzi V9 and V7III

Leather gas tank belt for Moto Guzzi V9 and V7III 2

-15%

Moto Guzzi

Leather gas tank strap for Moto Guzzi V7III / V7 850 / V9

€114.75 €135.00

Time left

Leather gas tank strap / belt for Moto Guzzi V7 III, V7 850 and V9. This strap enables you wrap your gas tank and give it a classy look. It's easy to assemble and as it simply wraps the gas tank and gets adjusted using the adjustment buckle on the nylon strap. Make sure to correctly choose your model of motorcycle so it perfectly fits. It's available in...

License plate holder for US format with rear light mount

License plate holder for US format with rear light mount 2

-15%

Parts

License plate holder for US format with rear light mount

€38.25 €45.00

Time left

This plate holder is suitable for US format license plates (horizontal 170x100mm). It is made of 3mm-thick aluminum, painted with satin black epoxy paint. This plate holder is to be purchased in addition to the original fender plate holder in order to convert it to fit US plates. Made in France

View

1
2