Products

Showing 1-30 of 30 item(s)

Leather Conditioner

Leather Conditioner 2

-15%

Parts

Leather Conditioner

$17 $20

This leather conditioner is a nourishing milk. It penetrates and nourishes the leather. You can use it for your saddles but also for your other leather products : shoes, jackets, gloves, saddlebags, etc. It comes with all the seat we offer. Capacity : 100 ml.

Thermal wrap

Thermal wrap 2

-15%

Parts

Exhaust wrap

$90 $106

Here are 15 meters (or 49') of exhaust wrap, 5 cm wide (1'' & 31/32), to wrap up your exhaust system and get the BAD BOY look you're aiming at! For the black color thermal wrap, we highly recommend you to paint it with an high temperature paint so the color can resist over the months. Available in Black or Beige color. This is high quality part,...

Headlight struts

Headlight struts 2

-25%

Parts

Headlight struts

$19 $25

Motorcycle headlight struts, manufactured out of aluminum, to perfectly adjust the position of your headlight. The hole diameter is ø8mm, the exterior diameter is ø29mm. For Moto Guzzi V7 Classic or Heritage headlight, choose the 10mm ones. For Triumph and Royal Enfield Classic or Heritage headlight, choose the 5mm ones. Comes in pairs.

Universal Classic Medium front mudguard

Universal Classic Medium front mudguard 2

-25%

Parts

Universal Classic Medium front mudguard

$97 $129

Universal Classic Medium front mudguard, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's not pre-drilled so you can fit it on any model of motorcycle. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black, brushed and ready to...

Universal Classic Mini front mudguard

Universal Classic Mini front mudguard 2

-25%

Parts

Universal Classic Mini front mudguard

$87 $115

Universal Classic Mini front mudguard, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's not pre-drilled so you can fit it on the motorcycle of your choice. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black, brushed and ready...

Universal Medium front mudguard

Universal Medium front mudguard 2

-25%

Parts

Universal Medium front mudguard

$97 $129

Universal Medium front mudguard, manufactured out of stainless steel. It's short but it's still long enough to protect you from the front wheel splashes. It's not pre-drilled so you can fit it on any model of motorcycle. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black, brushed...

Headlight brackets for original headlights V7 III / V7 850 / V9

Headlight brackets for original headlights V7 III / V7 850 / V9 2

-25%

Parts

Headlight brackets for original headlights Moto Guzzi V7 III / V7 850 / V9

$109 $146

Enhance the look of your Moto Guzzi V7 III, V7 850 or V9 with these machined aluminum headlight clamps, compatible with original LED and bulb headlights. With a length of 60 mm and 39-40 mm mounting clamps, they also allow the installation of adaptable turn signals. Finished in satin-black epoxy, they are supplied in pairs with stainless steel screws...

Universal Mini front mudguard

Universal Mini front mudguard 2

-25%

Parts

Universal Mini front mudguard

$97 $129

Universal Mini front mudguard, manufactured out of stainless steel. This front fender is very short, it enables you visually lighten the front of your motorcycle. It's not pre-drilled so you can fit it on any model of motorcycle. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black,...

Flat Track handlebars Ø22mm

Flat Track handlebars Ø22mm 2

-15%

Parts

Flat Track handlebars Ø22mm

$87 $102

Flat Track handlebar ø22mm manufactured out of steel, it enables you to get a more comfortable driving position and a better look. This handlebar has much pullback to the rider, and his flat Track look will make your bike handle better. Available in Ø22mm diameter only, and in Chromed or Brushed finish.

Leather cable guides

Leather cable guides 2

-25%

Parts

Leather cable guides

$7 $9

Leather cable guide. This strap enables you fasten your cables, or tie it together to your handlebars. If just like us, your motorcycle's finish is part of your obsessions, this cable guide is perfect for your project. Available in Aged brown, Black and Gold leather. Available in 80mm, 90mm, 115mm or 130mm length. Each strap is 20mm wide. Sold as a...

Round mirror ø8 steel for motorcycle

Round mirror ø8 steel for motorcycle 2

-15%

Parts

Round mirror ø8 steel for motorcycle

$38 $44

Mini round mirror, Ø8cm diameter with M8 threading, for upper position. The mirror shaft is 13cm long, its shape was specifically designed to guaranty a good rear visibility and a discreet look. Suitable for motorcycles with M10 screwing original mirrors fixation. Sold by unit, available in satin black only. Fit both left and right sides.

Bates headlight

Bates headlight 2

-15%

Parts

Bates headlight

$72 $85

Bates headlight for motorcycle. This low fixation Bates style headlight is ø15cm diameter. It has a metal casing and trim ring. It's discreet and enables you get a better finish level on your motorcycle. It's available in Chromed, Satin Black or with Black casing and Brushed or Chromed trim ring. It comes with the fixation bracket designed for the model...

Heritage headlight

Heritage headlight 2

-15%

Parts

Heritage headlight

$95 $112

Classic headlight for motorcycle. This M8 side fixation headlight has a ø180mm diameter. The casing and trim ring are metal, the window is plastic. It offers a great finish level, it's reduced casing (only 135mm deep) will offer a more compact look to your motorcycle. It's available with a Chromed or Brushed trim ring. Depending on the motorcycle model...

Aluminium handlebar grips for motocycles classic, vintage, cafe racer

Aluminium handlebar grips for motocycles classic, vintage, cafe racer 2

-25%

Parts

Motorcycle handlebar mounts, aluminum

$81 $109

Machined aluminium handlebar clamps for motorcycle. These risers are available in ø22mm diameter, ø28,6mm diameter or 1 inch (ø25,4mm) diameter, it's lighter and elegant. The clamps are satin black powder coat painted, and come with stainless steel screwing (size on the choice). Designed and manufactured at BAAK's workshop. Made in France

Classic headlight

Classic headlight 2

-15%

Parts

Classic headlight

$87 $102

Round headlight for classic motorcycles, with M8 side mount and ø180mm diameter. It features metal casing and bezel, with plastic glass, offering an exceptional level of finish. Its streamlined casing gives it a resolutely classic look. Depending on the motorcycle model chosen, a plug and play harness is supplied (which may justify a price difference...

Classic ø10 round aluminum motorcycle mirror

Classic ø10 round aluminum motorcycle mirror 2

-15%

Parts

Classic ø10 round aluminum motorcycle mirror

$62 $72

Classic round motorcycle mirror. This black mirror, Ø10cm / diameter, has an impeccable yet discreet finish. It offers perfect rearward visibility and fits any motorcycle. Height-adjustable thanks to 150mm articulated rod. Supplied with two adapters (left-hand and right-hand M10x1.25 mm). Additional adapters are available as options. Approved to European...

Motorcycle mirror under handlebars round ø8 in steel

Motorcycle mirror under handlebars round ø8 in steel 2

-15%

Parts

Motorcycle mirror under handlebars round ø8 in steel

$43 $51

Mini black Ø80mm bike mirror especially designed to be mounted below the handlebar in lower position. It offers a very discreet look and a good rear visibility with its wide angle glass. Available without adapter (for Ø8mm through shaft mounting or with adapter for ø22mm handlebars). Sold individually. Fit both left and right sides, available in satin...

Universal gas tank leather belt

Universal gas tank leather belt 2

-25%

Parts

Universal gas tank leather belt

$107 $143

Universal leather gas tank strap / belt, fits with any gas tank with the cap on the side. It gives a distinguished look to your motorcycle tank and protects it from scratches. It comes wrapping your gas tank, is easy to assemble and is adjustable thanks to a metal buckle fastener. Maximum length 190cm, minimum length 107cm. This genuine leather tank...

BAAK License plate lightning

BAAK License plate lightning 2

-15%

Parts

License plate lightning

$17 $20

LED license plate lightning. This LED license plate lightning is approved according to the ECE European standards (12V / 2W). We use it on some license plate holders manufactured at BAAK's. Measurement of the license plate lightning : Length 17mm Diameter 12mm øM8 fixation shaft.

View

BAAK black aluminium headlight brackets for motorcycles

BAAK black aluminium headlight brackets for motorcycles 2

-25%

Parts

Universal short headlight clamps for classic motorcycles

$109 $146

Headlight bracket for motorcycles, for M8 side headlight fixation, with optional front turn indicators holders. Designed and manufactured at BAAK's in France. Perfect to put a BAAK headlight on your motorcycle and improve its finish level. Ø39 - 40mm for Moto Guzzi V7I / V7 II / V7 III / V7 850 / V9 (60mm size) Ø41 - 42mm for Triumph Bonneville T100 / SE...

Large Leather Messenger Bag

Large Leather Messenger Bag 2

-15%

Parts

Large Leather Messenger Bag

$863 $1,015

Discover our removable leather satchel, an exceptional piece meticulously handcrafted by our French artisans. Every detail is painstakingly executed, bearing witness to our commitment to quality. This exquisite leather goods creation is crafted from BAAK's top-quality vegetable-tanned leathers. Delivered with an adjustable and detachable strap, this...

Large Leather Roll Top Pannier

Large Leather Roll Top Pannier 2

-15%

Parts

Large Leather Roll Top Pannier

$863 $1,015

Large Leather Roll Top pannier, carefully handcrafted by our leather worker for people who need pannier on their motorcycle but appreciate fine material and craftsmanship. The Rolled Top pannier is compatible with all SW-Motech SLC side carriers. (side carrier not supplied). Very detailed, this beautiful leather bag is made with BAAK leathers and suede...

Kit of 4 Fender Flares for Land Rover Defender 90/110/130 - Jeep and Toyota Style

Kit of 4 Fender Flares for Land Rover Defender 90/110/130 - Jeep and Toyota Style 2

-15%

Land Rover

Fender flares kit for Land Rover Defender

$923 $1,086

Enhance the look of your Land Rover Defender with our kit of 4 thick fiberglass fender flares. Inspired by the design of American Jeeps and Toyotas, these square-shaped flares are perfect for accommodating stock or slightly larger wheels. Delivered with a body molding strip for seamless installation, they are ready to be painted to match your style. Give...

Fork Spring blocks +15mm for Moto Guzzi V7 850

Fork Spring blocks +15mm for Moto Guzzi V7 850 2

-15%

Parts

Fork Spring blocks +15mm for Moto Guzzi V7 850

$30 $35

This pair of stainless steel fork spring shims allows you to raise the front end of your V7 850 by 15mm, so that your bike retains a similar ride height if you fit our 390mm Big Body shocks. These spacers are simply fitted in addition to the original fork spring spacers. sold in pairs Made in France

Moto Guzzi V7 850 turn signal harness - Easy mounting | BAAK

Moto Guzzi V7 850 turn signal harness - Easy mounting | BAAK 2

-15%

Parts

Turn signal harness MOTO GUZZI V7 850

$32 $37

Need to fit aftermarket indicators to your Moto Guzzi? This plug & play harness is for you! Compatible with your motorcycle's original terminals, it adapts easily to turn signals. With Japanese terminals from ø3.2 mm to 3.7 mm. The practical solution for customizing your bike. Sold in pairsMade in France

Removable windshield Moto Guzzi V7 III, V7 850, V9 | Retro and protection

Removable windshield Moto Guzzi V7 III, V7 850, V9 | Retro and protection 2

-15%

Parts

Removable windshield for Moto Guzzi V7 III / V7 850 / V9

$785 $923

Give your Moto Guzzi V7 III, V7 850 or V9 a retro-touring touch with this removable windscreen. 2 sec to remove without tools. Supplied complete with fastenings and matching headlight brackets, it's available in gloss black or leather (black or brown). Please note that the original headlamp is not suitable, so you'll need a ø180mm classic headlamp and a...

Moto Guzzi V7 850/V9 Skid Plate - Stainless Steel, Brushed or Black Satin

Moto Guzzi V7 850/V9 Skid Plate - Stainless Steel, Brushed or Black Satin 2

-25%

Parts

Engine protection for Moto Guzzi V7 850 - V9 (Euro 5)

$84 $112

Protect your Moto Guzzi V7 850, or V9 (Euro 5 Starting 2021) engine with this stainless steel skid plate. Available in two finishes: brushed or sleek satin black epoxy paint. Durable, stylish, and easy to install with all necessary mounting hardware included. It’s the perfect combo of looks and practicality, keeping your bike safe while turning heads....

Leather gas tank belt for Moto Guzzi V9 and V7III

Leather gas tank belt for Moto Guzzi V9 and V7III 2

-25%

Moto Guzzi

Leather gas tank strap for Moto Guzzi V7III / V7 850 / V9

$115 $153

Leather gas tank strap / belt for Moto Guzzi V7 III, V7 850 and V9. This strap enables you wrap your gas tank and give it a classy look. It's easy to assemble and as it simply wraps the gas tank and gets adjusted using the adjustment buckle on the nylon strap. Make sure to correctly choose your model of motorcycle so it perfectly fits. It's available in...

License plate holder for US format with rear light mount

License plate holder for US format with rear light mount 2

-25%

Parts

License plate holder for US format with rear light mount

$38 $51

This plate holder is suitable for US format license plates (horizontal 170x100mm). It is made of 3mm-thick aluminum, painted with satin black epoxy paint. This plate holder is to be purchased in addition to the original fender plate holder in order to convert it to fit US plates. Made in France

View

License plate holder for US format with light mount

License plate holder for US format with light mount 2

-25%

Parts

License plate holder for US format with light mount

$38 $51

This license plate holder is suitable for US size license plates (horizontal). It's manufactured out of 3mm thick aluminium and it's satin black powder coat painted. This support allows you to mount a license plate light. This part is only suitable for BAAK license plate holders.