Products

Showing 1-24 of 33 item(s)

Classic rear mudguard for Triumph (pre- 2016)

Classic rear mudguard for Triumph (pre- 2016) 2

-15%

Triumph

Classic rear mudguard for Triumph (pre- 2016)

€255.00 €300.00

Time left

Classic rear mudguard for Triumph (pre-2016 - air-cooled) manufactured out of stainless steel. Shorter than your original Triumph rear mudguard, it has an elegant raw look thanks to the molded edge at its end. You will still keep good protection against the rear wheel projections. Equipped with a LED taillight (CE approved for road use) with license...

Classic Medium front mudguard for Triumph

Classic Medium front mudguard for Triumph 2

-15%

Triumph

Classic Medium front mudguard for Triumph

€102.00 €120.00

Time left

Classic Medium front mudguard for Triumph, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled so you can easily fit it on the Triumph model of your choice. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, brushed and ready to...

Short rear mudguard for Triumph (pre- 2016)

Short rear mudguard for Triumph (pre- 2016) 2

-15%

Triumph

Heritage rear mudguard for Triumph (pre- 2016)

€306.00 €360.00

Time left

Heritage rear mudguard for Triumph (pre-2016 - air-cooled) manufactured out of stainless steel. It's shorter than your original Triumph rear mudguard, but it respects the original Triumph lines making it visually lighter, while keeping a good protection against the rear wheel projections. Equipped with a LED taillight (CE approved for road use) with...

Mini front mudguard for Triumph

Mini front mudguard for Triumph 2

-15%

Triumph

Mini front mudguard for Triumph

€140.25 €165.00

Time left

Mini front mudguard for Triumph, manufactured out of stainless steel. This front fender is very short, it enables you get a more compact look on the front end of your motorcycle. It's pre-drilled so you can easily fit it on your model of Triumph. It's designed and manufactured by our team at the workshop in France. It's available in satin black,...

Scrambler high front mudguard for Triumph Bonneville, Thruxton and Scrambler (pre-2016)

Scrambler high front mudguard for Triumph Bonneville, Thruxton and Scrambler (pre-2016) 2

-15%

Triumph

Scrambler front mudguard for Triumph (pre-2016)

€242.25 €285.00

Time left

High front fender for Triumph (pre-2016 - air-cooled). This Scrambler look front mudguard is handcrafted out of stainless steel, and comes on the lower triple trees of your Triumph thanks to the provided black fixation bracket. It offers a good protection against the front wheel projections and a strong off road look to your motorcycle. Available in...

Bates headlight plate for Triumph (pre-2016)

Bates headlight plate for Triumph (pre-2016) 2

-15%

Triumph

Bates headlight plate for Triumph (pre-2016)

€143.65 €169.00

Time left

Bates type headlight plate for Triumph (pre- 2016 - air-cooled). Essential to hide the steering column and all the cables after the mounting of a Bates headlight. Comes with 4 black leather clamps in black, aged brown, gold or ruby color. Available in satin black and raw aluminium finish. Measurements : 220mm x 190mm.

Tiny Motogadget speedo fixation bracket for Triumph (pre- 2016)

Tiny Motogadget speedo fixation bracket for Triumph (pre- 2016) 2

-15%

Triumph

Tiny Motogadget speedo fixation bracket for Triumph (pre- 2016)

€41.65 €49.00

Time left

Tiny Motogadget speedometer fixation bracket for Triumph (pre-2016). It's a machined aluminium bracket, satin black powder coated. This part comes with all the necessary screwing.

Engine protection for Triumph (pre-2016)

Engine protection for Triumph (pre-2016) 2

-15%

Triumph

Engine protection for Triumph (pre-2016)

€97.75 €115.00

Time left

Aluminium engine protection / sump guard for Triumph (pre-2016 - air-cooled), gives an aesthetic style to your motorcycle and a better protection to your engine. Easy to assemble, comes with stainless steel screws. This skid plate is made by BAAK Motocyclettes team at our workshop in France. We use it on most of our Triumph custom projects. Width : 170mm

Rear turn indicators brackets for Triumph

Rear turn indicators brackets for Triumph 2

-15%

Triumph

Rear turn indicators brackets for Triumph

€25.50 €30.00

Time left

Rear turn signals bracket for Triumph. Enables you to mount your turn signals on the upper shock absorber axles for a more discreet look. Compatible with the original passenger grab handle. Make sure to select the right model of motorcycle so you can receive brackets suitable for your motorcycle. Comes in pairs. Length: 50mm.

Rear turn indicators brackets for Triumph (pre- 2016)

Rear turn indicators brackets for Triumph (pre- 2016) 2

-15%

Triumph

Rear turn indicators brackets for Triumph (pre- 2016)

€25.50 €30.00

Time left

Rear turn indicators support for Triumph (pre-2016 - air-cooled). Simple, effective and very discreet. It's manufactured out of stainless steel, laser cut (3mm thick) and satin black powder coat painted. It fits with any rear fender. Delivered without turn signals. This part isn't suitable for the original (or accessory) passenger grab bar.

View

Front turn indicators bracket for Triumph

Front turn indicators bracket for Triumph 2

-15%

Triumph

Front turn indicators bracket for Triumph

€25.50 €30.00

Time left

Front turn indicators bracket / support for Triumph is simple, effective and very discreet. It enables you relocate your turn indicators under the steering column. It's stainless steel laser cut and satin black powder coated. It's particularly suitable for our Rectifier bracket for Triumph, or can be tightened on the upper fixation of the oil cooling...

View

Relocated ignition switch control bracket kit for Triumph (pre- 2016)

Relocated ignition switch control bracket kit for Triumph (pre- 2016) 2

-15%

Triumph

Relocated ignition switch control bracket kit for Triumph (pre- 2016)

€41.65 €49.00

Time left

Relocated ignition switch control bracket for Triumph (pre-2016 - air-cooled). This simple ignition switch support enables you to relocate the ignition control between the fuel tank and the left carburetor. Fits on the right side on the injection models (EFI). It requires to move the wiring harness that is in your headlight, under the gas tank, without...

Side license plate holder for Triumph

Side license plate holder for Triumph 2

-15%

Triumph

Side license plate holder for Triumph

€80.75 €95.00

Time left

Side license plate support / holder for Triumph. It attaches to the upper axis of the left shock absorber. It comes with a connection wiring harness that makes it 100% plug and play. Satin black powder coat painting finish. If you choose the optional turn indicators, we'll provide the potential resistors necessary for their proper functioning according to...

Rectifier / turn indicators / horn bracket for Triumph (pre- 2016)

Rectifier / turn indicators / horn bracket for Triumph (pre- 2016) 2

-15%

Triumph

Rectifier / turn indicators / horn bracket for Triumph (pre- 2016)

€41.65 €49.00

Time left

This bracket enables you to relocate your rectifier, front turn indicators and horn on a Triumph (pre-2016 - air-cooled) below your steering column. It visually lightens the line of the front of your motorcycle by grouping these parts on one bracket. This bracket is 21,8cm wide and 12cm high. It get assembled in the original place of your horn, under the...

Rectifier bracket for Triumph (pre- 2016)

Rectifier bracket for Triumph (pre- 2016) 2

-15%

Triumph

Rectifier bracket for Triumph (pre- 2016)

€25.50 €30.00

Time left

Rectifier relocation bracket for Triumph (pre-2016 - air-cooled). This bracket enables you to relocate the voltage rectifier, in place of the horn. Then the horn can be attached below, on the same bracket. It's manufactured out of aluminum laser cut. You may be obliged to move the original wiring harness under the gas tank. All the necessary screwing...

Classic Mini front mudguard for Triumph

Classic Mini front mudguard for Triumph 2

-15%

Triumph

Classic Mini front mudguard for Triumph

€91.80 €108.00

Time left

Classic Mini front mudguard for Triumph, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. We drill holes on this mudguard according to the model of Triumph you choose. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black, brushed and...

Headlight struts

Headlight struts 2

-15%

Parts

Headlight struts

€18.70 €22.00

Time left

Motorcycle headlight struts, manufactured out of aluminum, to perfectly adjust the position of your headlight. The hole diameter is ø8mm, the exterior diameter is ø29mm. For Moto Guzzi V7 Classic or Heritage headlight, choose the 10mm ones. For Triumph and Royal Enfield Classic or Heritage headlight, choose the 5mm ones. Comes in pairs.

Universal Classic rear mudguard

Universal Classic rear mudguard 2

-15%

Parts

Universal Classic rear mudguard

€255.00 €300.00

Time left

Classic Universal rear mudguard manufactured out of stainless steel. Shorter than your original rear mudguard, it has an elegant raw look thanks to the molded edge at its end. You will still keep good protection against the rear wheel projections. Equipped with a LED taillight (CE approved for road use) with license plate lightning and a license plate...

Universal Classic Medium front mudguard

Universal Classic Medium front mudguard 2

-15%

Parts

Universal Classic Medium front mudguard

€96.90 €114.00

Time left

Universal Classic Medium front mudguard, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's not pre-drilled so you can fit it on any model of motorcycle. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black, brushed and ready to...

Universal Classic Mini front mudguard

Universal Classic Mini front mudguard 2

-15%

Parts

Universal Classic Mini front mudguard

€86.70 €102.00

Time left

Universal Classic Mini front mudguard, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's not pre-drilled so you can fit it on the motorcycle of your choice. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black, brushed and ready...

Universal Medium front mudguard

Universal Medium front mudguard 2

-15%

Parts

Universal Medium front mudguard

€96.90 €114.00

Time left

Universal Medium front mudguard, manufactured out of stainless steel. It's short but it's still long enough to protect you from the front wheel splashes. It's not pre-drilled so you can fit it on any model of motorcycle. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black, brushed...

Universal Mini front mudguard

Universal Mini front mudguard 2

-15%

Parts

Universal Mini front mudguard

€96.90 €114.00

Time left

Universal Mini front mudguard, manufactured out of stainless steel. This front fender is very short, it enables you visually lighten the front of your motorcycle. It's not pre-drilled so you can fit it on any model of motorcycle. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black,...

Leather cable guides

Leather cable guides 2

-15%

Parts

Leather cable guides

€6.80 €8.00

Time left

Leather cable guide. This strap enables you fasten your cables, or tie it together to your handlebars. If just like us, your motorcycle's finish is part of your obsessions, this cable guide is perfect for your project. Available in Aged brown, Black and Gold leather. Available in 80mm, 90mm, 115mm or 130mm length. Each strap is 20mm wide. Sold as a...

Round mirror ø8 steel for motorcycle

Round mirror ø8 steel for motorcycle 2

-15%

Parts

Round mirror ø8 steel for motorcycle

€33.15 €39.00

Time left

Mini round mirror, Ø8cm diameter with M8 threading, for upper position. The mirror shaft is 13cm long, its shape was specifically designed to guaranty a good rear visibility and a discreet look. Suitable for motorcycles with M10 screwing original mirrors fixation. Sold by unit, available in satin black only. Fit both left and right sides.

1
2