Products

Showing 1-95 of 95 item(s)

Parts

Leather Conditioner

This leather conditioner is a nourishing milk. It penetrates and nourishes the leather. You can use it for your saddles but also for your other leather products : shoes, jackets, gloves, saddlebags, etc. It comes with all the seat we offer. Capacity : 100 ml.

Bmw

Battery box for BMW NineT

€330.00

Battery box for BMW NineT. This aluminum battery box is particularly useful to remove your original air box and keep your original battery. Designed and manufactured by our team in Lyon and then powder coated in stain black. It comes with all the necessary stainless steel hardware. It's designed to get a cleaner look on your motorcycle.

View

Bmw

Turn indicators holder cover for BMW NineT

€30.00

Front turn indicators holder cover for BMW NineT. These black aluminium bracket covers are particularly useful to keep a clean finish if you replace the original front blinkers. Designed and manufactured in our Lyon workshop in aluminum and powder coated in black. Comes in pair with the necessary hardware for the assembly.

View

Parts

Turn indicators wiring harness for BMW NineT

€29.00

Turn indicators wiring harness for BMW R NineT. These connectors enable you to connect any universal 10W turn indicators to the original wiring harness of your BMW NineT without having to cut or solder any wire. Comes in pair. Total length: 360mm (14")

Classic Medium front mudguard for BMW NineT

Classic Medium front mudguard for BMW NineT 2

-15%

Bmw

Classic Medium front mudguard for BMW NineT

€242.25 €285.00

Time left

Classic Medium front mudguard for BMW NineT, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled, comes with its satin black powder coated fixation bracket suitable for the selected model and the stainless steel screws required. It's designed and manufactured by our team at the workshop in...

-15%

Bmw

Classic rear mudguard for BMW NineT

€318.75 €375.00

Time left

Classic rear mudguard for BMW R 1200 NineT manufactured out of stainless steel. It has an elegant raw look thanks to the molded edge at its end. You will still keep good protection against the rear wheel projections. Equipped with a LED taillight (CE approved for road use) with license plate lightning, a rear license plate holder, rear turn indicators...

Classic Mini front mudguard for BMW NineT

Classic Mini front mudguard for BMW NineT 2

-15%

Bmw

Classic Mini front mudguard for BMW NineT

€242.25 €285.00

Time left

Classic Mini front mudguard for BMW R 1200 NineT, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled, comes with its satin black powder coated fixation bracket suitable for the selected model and the stainless steel screws required. It's designed and manufactured by our team at the...

-15%

Bmw

Medium front mudguard for BMW NineT

€242.25 €285.00

Time left

Medium front mudguard for BMW R 1200 NineT, manufactured out of stainless steel. It's short but it's still long enough to protect you from the front wheel splashes. It's pre-drilled, comes with its satin black powder coated fixation bracket suitable for the selected model and the stainless steel screws required. It's designed and manufactured by our team...

-15%

Bmw

Mini front mudguard for BMW NineT

€242.25 €285.00

Time left

Mini front mudguard for BMW R 1200 NineT, manufactured out of stainless steel. This front fender is very short, it enables you visually lighten the front of your NineT. It's pre-drilled, comes with its satin black powder coated fixation bracket suitable for the selected model and the stainless steel screws required. It's designed and manufactured by our...

Scrambler front mudguard for BMW NineT 2

-15%

Bmw

Scrambler front mudguard for BMW NineT

€242.25 €285.00

Time left

High front fender for BMW R NineT 1200. This Scrambler look front mudguard is handcrafted out of stainless steel, and gets assembled on the lower triple trees of your BMW NineT thanks to the provided fixation bracket. It offers a good protection and a strong off road look to your motorcycle. Available in Glossy black, Satin black, Brushed and Polished...

Aluminium wheel arch for BMW R 1200 NineT by BAAK

Aluminium wheel arch for BMW R 1200 NineT by BAAK 2

-15%

Bmw

Aluminium wheel arch for BMW NineT

€106.25 €125.00

Time left

Aluminium wheel arch for BMW R 1200 NineT. This wheel arch enables you get a perfect finish result once your rear fender is removed. It's equipped with a LED taillight, it comes with its plug & play wiring harness for taillight, and its fixation kit. It's satin black powder coat painted so it can resist over the years. Suitable for BMW R NineT...

-15%

Bmw

Bates headlight plate for BMW NineT

€143.65 €169.00

Time left

Headlight plate for Bates headlight for BMW R NineT. This aluminium plate enables to hide the steering column and the cables after the assembly of a Bates headlight on your NineT. Handcrafted out of aluminium, it's available in Satin black or Raw aluminium finish. Compatible with a Bates headlight or the original headlight. The leather fixation collars...

Parts

Classic leather seat for BMW R NineT

€1,050.00

Classic leather seat for BMW R 1200 NineT. This seat is handcrafted at BAAK's workshop, based on an original BMW seat pan ensuring the compatibility with your NineT. It's a two-seater model. Available in Aged brown, Gold, Black genuine leather, it offers a chic touch to your motorcycle. Choose a classic, squares or diamonds quilting style on the top...

Parts

Heritage leather seat for BMW R NineT

€870.00

Heritage leather seat for BMW R 1200 NineT. This seat is handcrafted at BAAK's workshop, based on an original BMW seat pan ensuring the compatibility with your NineT. It's a two-seater model. Available in Aged brown, Gold, Black genuine leather. The suede leather applied on the front provide a very elegant contrast. Choose a classic, squares or diamonds...

Parts

Rear mudguard wiring harness for BMW NineT

€19.00

Rear fender wiring harness for BMW R NineT. This connector enables you connect any rear taillight (light / brake light) to the original wiring harness of your BMW NineT without having to cut or weld any wire. Sold individually. Total length: 160mm. This wiring harness initially comes with all our NineT rear mudguards.

Speedometer lowering kit for BMW NineT 2

-15%

Bmw

Speedometer lowering kit for BMW NineT

€18.70 €22.00

Time left

Lowering kit for BMW NineT speedometer. These 4 struts enable you lower your original NineT speedometer by 10mm, to get a clear riding post. Suitable for BMW NineT Pure, Scrambler, Racer and Urban GS.

View

Bmw

Air filters kit for BMW NineT

€278.40

Air filters kit for BMW NineT. This kit includes two black air filters and a red oil breather. The air filters plug directly on the intake, in place of the original air intake pipes of your BMW NineT. No power or torque improvement with this kit, it's simply an aesthetic modification. We recommend you to go for our Aluminium battery box along with this...

View

-15%

Triumph

Rear mudguard for Bobber 1200 Triumph

€420.75 €495.00

Time left

Rear mudguard for Bobber 1200 manufactured out of stainless steel. Shorter than your original rear mudguard, it has an elegant raw look thanks to the molded edge at its end. You will still keep good protection against the rear wheel projections.Made in France

Black adjustable shock absorber for BMW R 1200 NineT by BAAK

Black adjustable shock absorber for BMW R 1200 NineT by BAAK 2

Parts

Shock absorber for BMW NineT

€420.00

Big Body shock absorber for BMW R 1200 NineT 1200 (2017-...). This mono shock absorber is manufactured in France by our partner Shock Factory. It offers a finish level and look that can't be compared to the original one. It's easy to adjust thanks to one only synchronized knob which adjust both compression and relaxation (48 different levels of setting)...

Side leather saddlebag for BMW NineT by BAAK

Side leather saddlebag for BMW NineT by BAAK 2

Parts

Side leather saddlebag for BMW R NineT

€289.99

This side leather saddlebag for BMW R 1200 NineT comes in place of your original air intake. His manufacturing is based on an aluminium plate that guarantees a rigid fixing on the machine, wrapped with leather to create a result that is harmonious with your gas tank shape. This saddlebag is available in Aged brown, black, gold leather.

Windscreen-for-triumph-1200-scrambler-xe-xc-custom

-15%

Triumph

Windscreen for Triumph 1200 Scrambler XE-XC

€81.60 €96.00

Time left

You'll agree that on the Triumph Scrambler XE and XC, the rear part of the original speedometer lacks a refined finish... That's why we created this windscreen, available in brushed aluminum or satin black, both simple and elegant, specifically designed for this model. Our windscreen is specially designed to perfectly complement the original fenders of...

Triumph

Monza gas cap for Triumph

€150.00

Monza gas cap for Triumph Modern Classics. The timeless design of this Monza cap will perfectly suit your gas tank thanks to our adapter. Only suitable for Triumph Modern Classics: Air cooled (2000-2016) and new Liquid Cooled (since 2016). The full kit is composed by the polished aluminium gas cap, a seal, the necessary mounting hardware and the adapter....

View

Turn indicators wiring harness for Triumph (2016-...)

Parts

Turn indicators wiring harness for Triumph (2016)

€29.00

This turn indicators wiring harness is necessary to fit new turn signals on your Triumph (2016-... I liquid cooled) without having to splice wires. This 160mm (6 &19/64") long wiring harness is plug and play on the original connectors of your motorcycle. This 160mm (6 &19/64") long wiring harness is perfect to achieve the assembly of aftermarket...

View

Triumph

Long cables kit for Triumph (2016)

€84.00

Long cables kit for Triumph (2016-...), it enables to mount wide handlebars on your motorcycle. This kit includes the front brake hose extension and the clutch cable. We use it on most of our custom Triumph builds.

Original turn indicators brackets kit for Triumph (2016)

-15%

Triumph

Original turn indicators brackets kit for Triumph (2016)

€25.50 €30.00

Time left

Turn signals brackets kit to relocate the factory or accessories indicators from Triumph that have keyed connection, to visually lighten your motorcycle. The front bracket comes on your oil-cooler, and the rear brackets come on the shock absorbers axles. These bracket kit comes without turn indicators.

Airbox removal kit for Triumph Bobber (2017)

Airbox removal kit for Triumph Bobber (2017) 2

-15%

Bonneville Bobber (2017 -...)

Airbox removal kit for Triumph Bobber (2017)

€191.25 €225.00

Time left

This airbox removal kit for Triumph Bonneville Bobber (2017-...) enables you replaced the original plastic airbox by an elegant leather protection part and two air filters and a crankcase breather. The air filters and breather are available in polished, satin black and brushed version. Appart from the aesthetic aspect, this modification leads to a slight...

Front turn indicators bracket for Triumph

-15%

Triumph

Front turn indicators bracket for Triumph

€25.50 €30.00

Time left

Front turn indicators bracket / support for Triumph is simple, effective and very discreet. It enables you relocate your turn indicators under the steering column. It's stainless steel laser cut and satin black powder coated. It's particularly suitable for our Rectifier bracket for Triumph, or can be tightened on the upper fixation of the oil cooling...

View

License plate holder for Triumph Bobber original mudguard (2017)

License plate holder for Triumph Bobber original mudguard (2017) 2

-15%

Bonneville Bobber (2017 -...)

License plate holder for Triumph Bobber original mudguard (2017)

€153.00 €180.00

Time left

License plate holder for the original mudguard of the Triumph Bonneville Bobber (2017-...). This taillight / license plate support unit comes in place of the original part. It's equipped with an EU approved LED vintage taillight with LED integrated license plate lightning, a license plate triangle, a plug & play wiring harness, optional turn...

Exhaust silencers for Triumph Bobber (2017)

Bonneville Bobber (2017 -...)

Exhaust silencers for Triumph Bobber (2017)

€765.00

Short exhaust silencers for Triumph Bobber 1200 (2017-...), designed and manufactured at our workshop in France. The stainless steel adapters connect to your catalytic converter (or X-Pipe). The mufflers are manufactured out of aluminium, and available in Brushed or Mat Black finish. This pair of silencers provides a rough and deep sound, without...

Classic Medium front mudguard for Triumph Bobber

Classic Medium front mudguard for Triumph Bobber 2

-15%

Bonneville Bobber (2017 -...)

Classic Medium front mudguard for Triumph Bobber

€178.50 €210.00

Time left

Classic Medium front mudguard for Triumph Bonneville Bobber (2017-...), manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled and comes with its mudguard fixation brackets so it can be easily fitted on your Triumph Bobber. This front fender isn't suitable for Triumph Bobber Black, Bobber TFC...

Classic mini front mudguard for Triumph Bobber

Classic mini front mudguard for Triumph Bobber 2

-15%

Bonneville Bobber (2017 -...)

Classic mini front mudguard for Triumph Bobber

€178.50 €210.00

Time left

Classic Mini front mudguard for Triumph Bonneville Bobber (2017-...), manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled and comes with its fixation brackets so it can be easily fitted on your Triumph Bobber. This front fender isn't compatible with the models Bobber Black, Bobber TFC and...

Mini front mudguard for Triumph Bobber 2

-15%

Bonneville Bobber (2017 -...)

Mini front mudguard for Triumph Bobber

€178.50 €210.00

Time left

Mini front mudguard for Triumph Bonneville Bobber (2017-...), manufactured out of stainless steel. This front fender is very short, it enables you get a more compact look on the front end of your motorcycle. It's pre-drilled and comes with its fixation bracket so it can be easily fitted on your Triumph Bobber. This front fender isn't suitable for the...

Leather seat for Triumph Bobber 1200 (2017-...)

Leather seat for Triumph Bobber 1200 (2017-...) 2

-15%

Bonneville Bobber (2017 -...)

Leather seat for Triumph Bobber

€510.00 €600.00

Time left

Leather seat for Triumph Bonneville Bobber 1200 (2017-...). This seat has the same shape as your original one, and a perfect finish level thanks to the great quality leather we selected and its diamonds-shape quilting on the seating area. This seat is manufactured by our craftsmen at BAAK's workshop in France. It's available in Aged brown, Black, Gold...

Adjustable shock absorber for Triumph Bobber 1200 I BAAK

Bonneville Bobber (2017 -...)

Shock absorber for Triumph Bobber 1200

€420.00

Big Body shock absorber for Triumph Bobber 1200 (2017-...). This mono shock absorber is manufactured in France by our partner Shock Factory. It offers a finish level and look that can't be compared to the original one. It's easy to adjust thanks to one only knob which adjust both compression and relaxation (48 different levels of setting) in a...

View

Triumph

Mini speedometer Tiny for Triumph (2016)

€1,230.00

Mini speedometer for Triumph (2016-... I Liquid-cooled). This tiny Plug & Play speedometer is THE solution to clear the cockpit of your Triumph while keeping the original features of your speedometer. It comes with a fixation bracket to mount it on one of your fork tube, or under the yokes if you already have one BAAK triple trees kit mounted on. The...

Triumph

Bates headlight / integrated speedometer for Triumph (2016)

€1,350.00

Bates headlight / integrated speedometer for Triumph (2016-... I Liquid-cooled). Inserted into a ø150mm diameter Bates lighthouse casing, this tiny Plug & Play speedometer is a simple solution to clear the cockpit of your Triumph while keeping the features of your original speedo. The speedometer is available in Classic or Vintage finish, the...

Parts kit for Triumph Bonneville BOBBER 1200 by BAAK

Parts kit for Triumph Bonneville BOBBER 1200 by BAAK 2

Bonneville Bobber (2017 -...)

Triumph Bobber 1200 Kit

€2,800.00

Kit Triumph Bonneville Bobber 1200. Our craftsmen design and manufacture this parts pack to improve the look of your Bobber along with the rising feelings. It offers a more radical version of this Triumph Bobber 1200 while keeping a touch of chic thanks to noble material parts. These accessories are easy to assemble and come with all the wiring harness,...

Triumph

Classic headlight / integrated speedometer for Triumph (2016)

€1,500.00

Classic headlight / integrated speedometer for Triumph (2016-... I Liquid-cooled). Inserted in a ø180mm Classic lighthouse casing, this Plug & Play speedometer is a simple solution to clear the cockpit of your Triumph while keeping the original features of your speedometer and a good readability. The speedometer bottom is available in White or Black...

Triumph

Brembo brake pads for Triumph

€51.80

Brembo front brake pads for Triumph. Softer than the original ones, these front brake pads are manufactured out of high quality material that provides a perfect braking constancy, as much in cold or high temperature conditions. The friction coefficient is higher than on your original Triumph brake pads, which provide excellent braking performances and...

Replacement air filters for Triumph Bobber 1200 Airbox removal kit

Replacement air filters for Triumph Bobber 1200 Airbox removal kit 2

-15%

Bonneville Bobber (2017 -...)

Spare air filters for Triumph Bobber 1200 airbox removal kit

€58.65 €69.00

Time left

This pack of spare air filters is suitable for our Airbox removal kit for Triumph Bobber 1200 (2017-...). It's composed of two air filters available in Brushed, polished and satin black. The air filters replacement routine on your motorcycle depends on how you use it along the year.

Parts

Leather keychain

€19.00

This leather keychain is handcrafted by our craftsmen in the same leather from which we manufacture our seats, saddlebags, etc... Simple and elegant, just as our motorized creations. It's available in Brown, black, gold or ruby (red) leather). The BAAK logo is hot-pressed on the keychain. You can attach your keys to it thanks to the ring, the...

Parts

Mirror adapter

€15.00

Handlebar adapters, required to mount some mirrors on your handlebar. We offer two different solutions : Adapter for ø22mm handlebars, to mount our mirrors in underbar position (M10 threading) Through rod type adapter, to mount a mirror on a through rod type fixation in classic or underbar position

Parts

H4 Yellow bulb

€12.00

Yellow H4 bulb for motorcycle lighthouse. This bulb adapts to any lighthouse equipped with an original H4 bulb. It allows you to provide the lighting of your machine with a resolutely vintage appearance, without affixing a filter on the window of your headlight. This product preserves the lighting qualities of your machine, to be favored with respect to...

Parts

Exhaust wrap

€69.00

Here are 15 meters (or 49') of exhaust wrap, 5 cm wide (1'' & 31/32), to wrap up your exhaust system and get the BAD BOY look you're aiming at! For the black color thermal wrap, we highly recommend you to paint it with an high temperature paint so the color can resist over the months. Available in Black or Beige color. This is high quality part,...

Parts

Left 3-buttons universal switch

€300.00

Universal handlebar controls, including :- an ON/OFF/ON turn signal switch- a push button for the horn- a push button for full headlights (may require adaptation of a relay) Available for 22mm (7/8") or 25,4mm (1") diameter handlebar. This part has a satin black powder coating, and is designed to be riveted to your handlebar.

-15%

Parts

Headlight struts

€18.70 €22.00

Time left

Motorcycle headlight struts, manufactured out of aluminum, to perfectly adjust the position of your headlight. The hole diameter is ø8mm, the exterior diameter is ø29mm. For Moto Guzzi V7 Classic or Heritage headlight, choose the 10mm ones. For Triumph and Royal Enfield Classic or Heritage headlight, choose the 5mm ones. Comes in pairs.

Parts

Vintage taillight

€44.00

Vintage motorcycle universal taillight manufactured out of steel. This Ø65mm diameter LED light includes a license plate lightning under the light. Made in durable steel and then powder coated in black this tail light is available with or without the "STOP" brushed insert. Much more discreet than most of the factory taillights, and a will give your bike...

View

-15%

Parts

Universal Classic rear mudguard

€255.00 €300.00

Time left

Classic Universal rear mudguard manufactured out of stainless steel. Shorter than your original rear mudguard, it has an elegant raw look thanks to the molded edge at its end. You will still keep good protection against the rear wheel projections. Equipped with a LED taillight (CE approved for road use) with license plate lightning and a license plate...

Universal Classic Medium front mudguard 2

-15%

Parts

Universal Classic Medium front mudguard

€96.90 €114.00

Time left

Universal Classic Medium front mudguard, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's not pre-drilled so you can fit it on any model of motorcycle. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black, brushed and ready to...

-15%

Parts

Universal Classic Mini front mudguard

€86.70 €102.00

Time left

Universal Classic Mini front mudguard, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's not pre-drilled so you can fit it on the motorcycle of your choice. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black, brushed and ready...

-15%

Parts

Universal Medium front mudguard

€96.90 €114.00

Time left

Universal Medium front mudguard, manufactured out of stainless steel. It's short but it's still long enough to protect you from the front wheel splashes. It's not pre-drilled so you can fit it on any model of motorcycle. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black, brushed...

-15%

Parts

Universal Mini front mudguard

€96.90 €114.00

Time left

Universal Mini front mudguard, manufactured out of stainless steel. This front fender is very short, it enables you visually lighten the front of your motorcycle. It's not pre-drilled so you can fit it on any model of motorcycle. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black,...

-15%

Parts

Leather cable guides

€6.80 €8.00

Time left

Leather cable guide. This strap enables you fasten your cables, or tie it together to your handlebars. If just like us, your motorcycle's finish is part of your obsessions, this cable guide is perfect for your project. Available in Aged brown, Black and Gold leather. Available in 80mm, 90mm, 115mm or 130mm length. Each strap is 20mm wide. Sold as a...

Parts

Mini 21W turn indicators

€19.00

Mini 21W turn indicators manufactured out of plastic, with 21W bulb and M10 fixation threading. These turn indicators offer a very good finish level. Sold in pairs. EU approved for road use.

-15%

Parts

Round mirror ø8 steel for motorcycle

€33.15 €39.00

Time left

Mini round mirror, Ø8cm diameter with M8 threading, for upper position. The mirror shaft is 13cm long, its shape was specifically designed to guaranty a good rear visibility and a discreet look. Suitable for motorcycles with M10 screwing original mirrors fixation. Sold by unit, available in satin black only. Fit both left and right sides.

Universal Classic headlight / integrated speedometer

Parts

Universal Classic headlight / integrated speedometer

€678.00

Universal Classic headlight with integrated speedometer. The metal casing lighthouse is Ø180mm diameter with M8 side fixation. The aluminum Chronoclassic speedometer is manufactured by Acewell. It's easy to setup according to the diameter of your wheel. The headlight and speedo are EU approved for road use. BAAK EXCLUSIVITY Contact the sales team to...

Parts

Bates headlight

€75.00

Bates headlight for motorcycle. This low fixation Bates style headlight is ø15cm diameter. It has a metal casing and trim ring. It's discreet and enables you get a better finish level on your motorcycle. It's available in Chromed, Satin Black or with Black casing and Brushed or Chromed trim ring. It comes with the fixation bracket designed for the model...

Parts

Biltwell Renegade handlebars grips

€22.00

Biltwell Renegade handlebar grips, produced by Biltwell for character motorcycle. It offers a better handtaking of your handlebar, a great riding comfort and an incredible look. Handlebar diameter 1" (ø25,4mm) or ø22mm. Comes in pairs. Available in Black only.

Parts

Heritage headlight

€99.00

Classic headlight for motorcycle. This M8 side fixation headlight has a ø180mm diameter. The casing and trim ring are metal, the window is plastic. It offers a great finish level, it's reduced casing (only 135mm deep) will offer a more compact look to your motorcycle. It's available with a Chromed or Brushed trim ring. Depending on the motorcycle model...

Parts

Biltwell Thruster handlebars grips

€22.00

Biltwell Thruster handlebar grips, manufactured by Biltwell for character motorcycle. It offers a better handtaking of your handlebar, a great riding comfort and an incredible look. Handlebar diameter 1" (ø25,4mm) or ø22mm. Comes in pairs. Available in Black and Brown color.

Parts

Leather covered handlebar grips

€145.00

Leather covered handlebars grips. Wrapped with a high quality leather, it gives a touch of chic to your motorcycle while keeping a good takeover. Available in aged brown, gold, black and ruby leather. Four thread stitchings colors available so it perfectly fits your bike. Available for ø25,4mm (1 inch) handlebars.

Aluminium handlebar grips for motocycles classic, vintage, cafe racer

Aluminium handlebar grips for motocycles classic, vintage, cafe racer 2

-15%

Parts

Motorcycle handlebar mounts, aluminum

€81.60 €96.00

Time left

Machined aluminium handlebar clamps for motorcycle. These risers are available in ø22mm diameter, ø28,6mm diameter or 1 inch (ø25,4mm) diameter, it's lighter and elegant. The clamps are satin black powder coat painted, and come with stainless steel screwing (size on the choice). Designed and manufactured at BAAK's workshop. Made in France

Parts

Classic headlight

€90.00

Round headlight for classic motorcycles, with M8 side mount and ø180mm diameter. It features metal casing and bezel, with plastic glass, offering an exceptional level of finish. Its streamlined casing gives it a resolutely classic look. Depending on the motorcycle model chosen, a plug and play harness is supplied (which may justify a price difference...

Classic ø10 round aluminum motorcycle mirror

Parts

Classic ø10 round aluminum motorcycle mirror

€64.00

Classic round motorcycle mirror. This black mirror, Ø10cm / diameter, has an impeccable yet discreet finish. It offers perfect rearward visibility and fits any motorcycle. Height-adjustable thanks to 150mm articulated rod. Supplied with two adapters (left-hand and right-hand M10x1.25 mm). Additional adapters are available as options. Approved to European...

Parts

Universal Medium side leather saddlebag

€174.00

Universal Medium leather side saddlebag for motorcycle. Handcrafted at our workshop, it enables you to bring some stuff while you ride, and gives a great vintage look to your motorcycle. It's available in aged brown, gold, black or ruby leather color. The bottom of the saddle is pre-drilled (120mm enter-axis) so you can assemble it easily on your bike....

Motorcycle mirror under handlebars round ø8 in steel

Motorcycle mirror under handlebars round ø8 in steel 2

-15%

Parts

Motorcycle mirror under handlebars round ø8 in steel

€38.25 €45.00

Time left

Mini black Ø80mm bike mirror especially designed to be mounted below the handlebar in lower position. It offers a very discreet look and a good rear visibility with its wide angle glass. Available without adapter (for Ø8mm through shaft mounting or with adapter for ø22mm handlebars). Sold individually. Fit both left and right sides, available in satin...

Parts

Universal Mini side leather saddlebag

€162.00

Universal Medium leather side saddlebag for motorcycle. Handcrafted at our workshop, it enables you to bring some stuff while you ride, and gives a great vintage look to your motorcycle. It's available in aged brown, gold, black or chocolat leather color. It's particularly suitable to be put on the original battery cover of a Royal Enfield Classic /...

Universal aluminium silencer for motorcycle

Parts

Universal aluminium silencer for motorcycle

€294.00

Universal exhaust muffler / silencer manufactured out of aluminium. This silencer fits any engine size motorcycle and offers a flawless finish, perfect to improve the look and sound of your build. It includes a M8 insert for the fixation, and a spring on the other side. Available in two different length and for manifolds in diameter Ø38mm, Ø40mm and...

-15%

Parts

Universal gas tank leather belt

€107.10 €126.00

Time left

Universal leather gas tank strap / belt, fits with any gas tank with the cap on the side. It gives a distinguished look to your motorcycle tank and protects it from scratches. It comes wrapping your gas tank, is easy to assemble and is adjustable thanks to a metal buckle fastener. Maximum length 190cm, minimum length 107cm. This genuine leather tank...

Parts

Leather fork gaiters

€240.00

Pair of genuine leather fork gaiters. These 4, 5, 6 or 8 folds fork boots are handcrafted in France, and bring a touch of authenticity and exception to your motorcycle. It's water-repellent and especially designed to resist to an intensive use. Available in Aged brown, black, gold leather color. Diameter Ø41mm top and Ø63mm bottom. It comes in pairs with...

Parts

License plate lightning

€18.00

LED license plate lightning. This LED license plate lightning is approved according to the ECE European standards (12V / 2W). We use it on some license plate holders manufactured at BAAK's. Measurement of the license plate lightning : Length 17mm Diameter 12mm øM8 fixation shaft.

View

Leather handlebar pad for motorcycle (black, brown, red, gold)

Leather handlebar pad for motorcycle (black, brown, red, gold) 2

-15%

Parts

Leather handlebar pad

€63.75 €75.00

Time left

Leather-covered handlebar pad. Appart from the protection brought by this pad in case of shock with your handlebar, his leather cover will bring a classic off road look to your motorcycle. Our craftsmen re-interpreted the codes of off road bar pads to give it an aesthetic use. The inner diameter for the crossbar is ø12mm, the external diameter of the pad...

BAAK black aluminium headlight brackets for motorcycles

BAAK black aluminium headlight brackets for motorcycles 2

-15%

Parts

Universal short headlight clamps for classic motorcycles

€109.65 €129.00

Time left

Headlight bracket for motorcycles, for M8 side headlight fixation, with optional front turn indicators holders. Designed and manufactured at BAAK's in France. Perfect to put a BAAK headlight on your motorcycle and improve its finish level. Ø39 - 40mm for Moto Guzzi V7I / V7 II / V7 III / V7 850 / V9 (60mm size) Ø41 - 42mm for Triumph Bonneville T100 / SE...

Double optics headlight plate for motorcycles - BAAK

Double optics headlight plate for motorcycles - BAAK 2

Parts

Universal Trail headlight plate

€465.00

Our universal double optics headlight plate takes its inspiration from the 80's Trail universe. Perfect for a Scrambler project, this headlight plate is designed by our team and manufactured out of glass fiber. It includes a wiring harness extension and aluminium fixation brackets supposed to be assembled on the fork tubes (ø39 - ø40mm / ø41 - ø42mm /...

-15%

Parts

BAAK N°1 handlebars Ø25,4mm

€135.15 €159.00

Time left

Wide stainless steel BAAK N°1 handlebars in Ø25,4mm (1 inch). It's flatter, wider and has more pullback / sweep to the rider than most of the other handlebars. It will offer a very distinguished look to your motorcycle, and improve its handling qualities and your riding position. It's available in Satin black and Brushed finish. The stainless steel tubes...

Leather wiring harness cover for Triumph Bobber airbox removal kit

Leather wiring harness cover for Triumph Bobber airbox removal kit 2

Bonneville Bobber (2017 -...)

Wiring cover for airbox removal kit Triumph Bobber (2017)

€165.00

Our Airbox removal kit for Triumph Bobber (2017-...) lets you remove your original airbox of your machine. Now we offer the elegant leather piece hiding the wiring harness separately, without the filters. Designed and manufactured at the workshop by our craftsmen, this wiring harness cover is available in brown, black, gold and ruby leather.

Parts

7’' full LED headlight Bottom Mount

€419.94

Lighting can significantly change the look of your motorcycle. Switch to LED with this black neo-retro headlight with daytime running light function. Beyond giving you more light to see better and be seen better, style is important! We use this headlight in particular on our BMW R NineT Street Tracker.

Front-turn-indicators-bracket-Triumph-Bobber-1200

Front-turn-indicators-bracket-Triumph-Bobber-1200 2

-15%

Parts

Front turn indicators bracket for Triumph Bobber 1200

€21.25 €25.00

Time left

Turn signals brackets kit to relocate the indicators Triumph Bobber 1200 to visually lighten your motorcycle. The bracket comes on your oil-cooler.

Side covers (low exhaust line) for Triumph Scrambler 1200 XC/XE

Side covers (low exhaust line) for Triumph Scrambler 1200 XC/XE 2

-15%

Parts

Side covers (low exhaust line) for Triumph Scrambler 1200 XC/XE

€168.30 €198.00

Time left

Side covers for Triumph Scrambler 1200 XC/XE in aluminium. Attaches to replace the original side covers of your Triumph 1200 XC or XE.

Heritage leather seat for Triumph Scrambler 1200 XC/XE

Parts

Heritage leather seat for Triumph Scrambler 1200 XC/XE

€765.00

Heritage Leather Seat for Triumph Scrambler 1200 XC/XE. Replace the original seat of your Triumph 1200 XC or XE.

-15%

Parts

Large Leather Messenger Bag

€762.45 €897.00

Time left

Discover our removable leather satchel, an exceptional piece meticulously handcrafted by our French artisans. Every detail is painstakingly executed, bearing witness to our commitment to quality. This exquisite leather goods creation is crafted from BAAK's top-quality vegetable-tanned leathers. Delivered with an adjustable and detachable strap, this...

-15%

Parts

Large Leather Roll Top Pannier

€762.45 €897.00

Time left

Large Leather Roll Top pannier, carefully handcrafted by our leather worker for people who need pannier on their motorcycle but appreciate fine material and craftsmanship. The Rolled Top pannier is compatible with all SW-Motech SLC side carriers. (side carrier not supplied). Very detailed, this beautiful leather bag is made with BAAK leathers and suede...

Side plate bracket for Triumph Bobber (2017)

Side plate bracket for Triumph Bobber (2017) 2

-15%

Parts

Side plate bracket for Triumph Bobber (2017)

€80.75 €95.00

Time left

Optimize the appearance of your Triumph Bonneville Bobber with this side license plate bracket. Featuring plate illumination and plug-and-play wiring, it ensures easy installation. Not compatible with the original mudguard, this bracket is tolerated by certain motorcycle inspection centers in France. Made in France

Aluminum Side Covers for Triumph Scrambler 1200 X/XC/XE - Improved Heat Protection and Dynamic Look

-15%

Scrambler 1200 x/xc/xe

Side covers (for original high exhaust system) Triumph Scrambler 1200 X/XC/XE

€168.30 €198.00

Time left

Enhance your Triumph Scrambler 1200 X/XC/XE with these aluminum side covers designed for the original high exhaust line. They not only improve heat protection but also add a dynamic look to your bike. These covers allow you to replace the original plastic parts with a more robust and aesthetically pleasing solution. Easy to install, they fit directly in...

Plug and play headlight for Triumph (2016...)

Parts

Plug and play headlight for Triumph (2016...)

€27.00

Looking to customize your Triumph (2016 and up) without the hassle? This plug and play front headlight pilot light makes it super easy. With a connector fully compatible with your original wiring, you can install an adaptable headlight in no time. Perfect for café racer, scrambler, or bobber projects, it ensures a clean, simple setup. Made in France.

Removable windshield for BMW Nine T Pure and Scrambler

Removable windshield for BMW Nine T Pure and Scrambler 2

-15%

Parts

Removable windshield for BMW Nine T Pure and Scrambler

€693.60 €816.00

Time left

For BMW Nine T Pure or Scrambler, this retro-touring removable windscreen is the perfect accessory for everyday use or long-distance travel.Easy to remove in 2 seconds without tools, it leaves just four discreet brackets. Please note that it is not compatible with the original headlight, but only with our Bates headlight, to be ordered separately....

Round handlebar mirror ø10 HIGHSIDER MONTANA-SLIM EVO SHORT

Round handlebar mirror ø10 HIGHSIDER MONTANA-SLIM EVO SHORT 2

Parts

Round Bar End mirror ø10 HIGHSIDER MONTANA-SLIM EVO SHORT

€84.00

Looking for a discreet, high-performance mirror? The HIGHSIDER MONTANA-SLIM EVO SHORT is for you. With a thickness of just 5 mm, a black anodized aluminum design and convex glass for optimum visibility, this mirror combines style and safety. Easy to install on handlebars from 12 to 22 mm, it complies with E standards for left- or right-hand use.

Bullet-type LED motorcycle turn indicators in black aluminum/brushed finish

Parts

Bullet-type LED motorcycle turn indicators in black aluminum/brushed finish

€78.00

Bullet-type motorcycle LED 10W turn signals in black aluminum with brushed trim combine elegance and efficiency. Featuring clear glass, they measure 20 mm in diameter and 36.5 mm in length. Mounting is simple, thanks to an M8mm screw fastener, and they are compatible with a 12 V system. Supplied sheathed and with ø3.2mm Japanese round crimped lugs....

Classic ø10 round motorcycle mirror in aluminum, long stem

Parts

Classic ø10 round motorcycle mirror in aluminum, long stem

€66.00

The Classic HIGHSIDER MONTANA XL round motorcycle mirror combines elegance and functionality with its timeless design. Its black anodized finish, combined with an extended 25 mm stem, offers enhanced rear visibility. Designed to improve ergonomics and guarantee a minimalist look, it's perfect for vintage and custom motorcycles. Sold individually.

motoscope chronoclassic 2 speedometer for BMW NineT 2017-2023

Parts

Motoscope chronoclassic 2 speedometer for BMW NineT 2017-2023

cher

€570.00

Opt for the Chronoclassic 2 Motoscope speedometer by Motogadget for your BMW NineT (2017-2023) and transform your bike in just minutes. This fully wired 'plug and ride' kit is easy to install without any technical knowledge required! Compatible with R9T models (2014-2016) and Euro 4 (post-2017) models such as Urban G/S, Pure, and Scrambler. Installation...

Parts

VANS 25.4mm Handlebar Grips

€28.80

Vans handlebar grips, right and left, for motorcycles. Featuring the classic waffle sole pattern of Vans® and constructed from ODI's exclusive grip compounds. For handlebars with a 25.4mm (1 inch) diameter, also available below in ø22mm. Sold in pairs.

License plate holder for US format with rear light mount

License plate holder for US format with rear light mount 2

-15%

Parts

License plate holder for US format with rear light mount

€38.25 €45.00

Time left

This plate holder is suitable for US format license plates (horizontal 170x100mm). It is made of 3mm-thick aluminum, painted with satin black epoxy paint. This plate holder is to be purchased in addition to the original fender plate holder in order to convert it to fit US plates. Made in France

View

License plate holder for US format with light mount

License plate holder for US format with light mount 2

-15%

Parts

License plate holder for US format with light mount

€38.25 €45.00

Time left

This license plate holder is suitable for US size license plates (horizontal). It's manufactured out of 3mm thick aluminium and it's satin black powder coat painted. This support allows you to mount a license plate light. This part is only suitable for BAAK license plate holders.

Bates headlight support - Triumph 1200 Bobber

Home

Bates headlight support - Triumph 1200 Bobber

€25.00

Bates headlight mounting bracket for Triumph Bobber 1200. This bracket attaches to the lower triple tree of the Triumph Bobber 1200. This allows for the installation of a lower-mount Bates headlight. Made of 4mm thick stainless steel. Satin black epoxy paint.

Home

Trail engine guard - Triumph 1200 XE-XC

€160.00

Aluminum Trail Skid Plate for Triumph Scrambler 1200 XE-XC In addition to giving your Scrambler an adventurous look, this skid plate provides effective protection for the lower engine in all conditions. Made of 4 mm thick aluminum, it provides a real shield against splashes, stones, and impacts associated with aggressive off-road riding. Easy to install,...