Scrambler (2006-2016)

Showing 1-24 of 38 item(s)

Parts

Leather Conditioner

This leather conditioner is a nourishing milk. It penetrates and nourishes the leather. You can use it for your saddles but also for your other leather products : shoes, jackets, gloves, saddlebags, etc. It comes with all the seat we offer. Capacity : 100 ml.

Triumph

Monza gas cap for Triumph

€150.00

Monza gas cap for Triumph Modern Classics. The timeless design of this Monza cap will perfectly suit your gas tank thanks to our adapter. Only suitable for Triumph Modern Classics: Air cooled (2000-2016) and new Liquid Cooled (since 2016). The full kit is composed by the polished aluminium gas cap, a seal, the necessary mounting hardware and the adapter....

View

Triumph

Motogadget M-Tri for Triumph (pre- 2016)

€199.50

Multiplexing M-Tri box manufactured by Motogadget for Triumph Bonneville, Scrambler and Thruxton EFI since 2011 (equipped with digital speedometer). Essential to remove your original speedometer, because without it the motorcycle will not start. This M-tri enables you keep all all the original features of your speedometer, in order to fit any kind of...

Triumph

Rear mudguard wiring harness for Triumph

€19.00

Rear mudguard wiring harness for Triumph. This wiring harness is necessary to connect an aftermarket set of turn indicators and taillight on your Triumph. It's plug & play over the factory connector, just make sure to select the right model. Comes standard with all the mudguards we sell for Triumph. Manufactured at BAAK's workshop in France.

View

Triumph

Short leather seat kit for Triumph (pre- 2016)

€1,290.00

Short leather seat kit for Triumph (before 2016 - air-cooled). This leather seat kit enables you shorten the rear end of the motocycle to reach a more compact look while keeping two seatings to bring a passenger. No welding required. It comes with assembly instructions. Comes with: Machined aluminium short subframe system Genuine short leather seat...

Triumph

Bates headlight / integrated speedometer for Triumph (pre- 2016)

€650.00

Bates headlight with integrated speedometer for Triumph (pre-2016 - air-cooled). Here's how to purify your Triumph riding post while keeping all the original features of a speedometer. The Tiny speedometer shows the total daily mileage, LED indicator, oil pressure, high beam, gas reserve, hours, maximum speed and neutral. This part comes as plug &...

Triumph

Classic headlight / integrated speedometer for Triumph (pre- 2016)

€840.00

Classic headlight with integrated speedometer for Triumph (pre-2016 - air-cooled). This Ø180mm satin black metal headlight with M8 side fixation, with a Motogadget Chronoclassic inserted in the casing is the right way to visually lighten your riding post while keeping advanced speedometer features. It comes as a plug & play part, pre-wired and...

Bates headlight plate for Triumph (pre-2016)

-15%

Triumph

Bates headlight plate for Triumph (pre-2016)

€143.65 €169.00

Time left

Bates type headlight plate for Triumph (pre- 2016 - air-cooled). Essential to hide the steering column and all the cables after the mounting of a Bates headlight. Comes with 4 black leather clamps in black, aged brown, gold or ruby color. Available in satin black and raw aluminium finish. Measurements : 220mm x 190mm.

Triumph

Side leather saddlebag for Triumph (pre- 2016)

€273.00

Side leather saddlebag for Triumph (pre-2016 - air-cooled). This saddlebag is handcrafted in our workshop in the same leather as our seats. It enables you to transport some stuff and gives a retro distinguished look to your bike. It's available in Aged brown, gold, black leather. It comes mounting on a black satin painted aluminium plate that comes in...

Rear turn indicators brackets for Triumph

-15%

Triumph

Rear turn indicators brackets for Triumph

€25.50 €30.00

Time left

Rear turn signals bracket for Triumph. Enables you to mount your turn signals on the upper shock absorber axles for a more discreet look. Compatible with the original passenger grab handle. Make sure to select the right model of motorcycle so you can receive brackets suitable for your motorcycle. Comes in pairs. Length: 50mm.

Front turn indicators bracket for Triumph

-15%

Triumph

Front turn indicators bracket for Triumph

€25.50 €30.00

Time left

Front turn indicators bracket / support for Triumph is simple, effective and very discreet. It enables you relocate your turn indicators under the steering column. It's stainless steel laser cut and satin black powder coated. It's particularly suitable for our Rectifier bracket for Triumph, or can be tightened on the upper fixation of the oil cooling...

Rectifier / turn indicators / horn bracket for Triumph (pre- 2016)

-15%

Triumph

Rectifier / turn indicators / horn bracket for Triumph (pre- 2016)

€41.65 €49.00

Time left

This bracket enables you to relocate your rectifier, front turn indicators and horn on a Triumph (pre-2016 - air-cooled) below your steering column. It visually lightens the line of the front of your motorcycle by grouping these parts on one bracket. This bracket is 21,8cm wide and 12cm high. It get assembled in the original place of your horn, under the...

Rectifier bracket for Triumph (pre- 2016)

-15%

Triumph

Rectifier bracket for Triumph (pre- 2016)

€25.50 €30.00

Time left

Rectifier relocation bracket for Triumph (pre-2016 - air-cooled). This bracket enables you to relocate the voltage rectifier, in place of the horn. Then the horn can be attached below, on the same bracket. It's manufactured out of aluminum laser cut. You may be obliged to move the original wiring harness under the gas tank. All the necessary screwing...

Leather dye, perfect for motorcycle seats

Leather dye, perfect for motorcycle seats 2

Parts

Leather dye cream

€24.00

This leather dye cream is a maintenance solution. It penetrates the leather and gives it a deep black tint. You can use it for your saddles but also for any other leather product: shoes, jackets, gloves, saddlebags, etc. Capacity: 200 ml. It's available for Black, Gold, Brown and Ruby (red) leather.Should be applied with a cloth, mixed with our...

Parts

H4 Yellow bulb

€12.00

Yellow H4 bulb for motorcycle lighthouse. This bulb adapts to any lighthouse equipped with an original H4 bulb. It allows you to provide the lighting of your machine with a resolutely vintage appearance, without affixing a filter on the window of your headlight. This product preserves the lighting qualities of your machine, to be favored with respect to...

Parts

21W turn indicators bulbs

209-405

€9.00

Transparent Mini Turn indicators bulbs, 21W, 12V. Comes in pair.

View

Parts

Exhaust wrap

€69.00

Here are 15 meters (or 49') of exhaust wrap, 5 cm wide (1'' & 31/32), to wrap up your exhaust system and get the BAD BOY look you're aiming at! For the black color thermal wrap, we highly recommend you to paint it with an high temperature paint so the color can resist over the months. Available in Black or Beige color. This is high quality part,...

Stainless steel collars for exhaust wrap

Parts

Stainless steel collars for exhaust wrap

€24.00

This batch of 8 self-fruits in stainless steel will allow you to correctly attach the thermal strip to your exhaust. Don't tell us that you just go to do this with twisted thread. delivered by 8 units.

-15%

Parts

Headlight struts

€18.70 €22.00

Time left

Motorcycle headlight struts, manufactured out of aluminum, to perfectly adjust the position of your headlight. The hole diameter is ø8mm, the exterior diameter is ø29mm. For Moto Guzzi V7 Classic or Heritage headlight, choose the 10mm ones. For Triumph and Royal Enfield Classic or Heritage headlight, choose the 5mm ones. Comes in pairs.

-15%

Parts

Leather cable guides

€6.80 €8.00

Time left

Leather cable guide. This strap enables you fasten your cables, or tie it together to your handlebars. If just like us, your motorcycle's finish is part of your obsessions, this cable guide is perfect for your project. Available in Aged brown, Black and Gold leather. Available in 80mm, 90mm, 115mm or 130mm length. Each strap is 20mm wide. Sold as a...

Parts

Bates headlight

€75.00

Bates headlight for motorcycle. This low fixation Bates style headlight is ø15cm diameter. It has a metal casing and trim ring. It's discreet and enables you get a better finish level on your motorcycle. It's available in Chromed, Satin Black or with Black casing and Brushed or Chromed trim ring. It comes with the fixation bracket designed for the model...

Parts

Heritage headlight

€99.00

Classic headlight for motorcycle. This M8 side fixation headlight has a ø180mm diameter. The casing and trim ring are metal, the window is plastic. It offers a great finish level, it's reduced casing (only 135mm deep) will offer a more compact look to your motorcycle. It's available with a Chromed or Brushed trim ring. Depending on the motorcycle model...

Parts

Leather covered handlebar grips

€145.00

Leather covered handlebars grips. Wrapped with a high quality leather, it gives a touch of chic to your motorcycle while keeping a good takeover. Available in aged brown, gold, black and ruby leather. Four thread stitchings colors available so it perfectly fits your bike. Available for ø25,4mm (1 inch) handlebars.

Parts

Classic headlight

€90.00

Round headlight for classic motorcycles, with M8 side mount and ø180mm diameter. It features metal casing and bezel, with plastic glass, offering an exceptional level of finish. Its streamlined casing gives it a resolutely classic look. Depending on the motorcycle model chosen, a plug and play harness is supplied (which may justify a price difference...