Scrambler (2006-2016)

Showing 1-36 of 57 item(s)

Parts

Leather Conditioner

This leather conditioner is a nourishing milk. It penetrates and nourishes the leather. You can use it for your saddles but also for your other leather products : shoes, jackets, gloves, saddlebags, etc. It comes with all the seat we offer. Capacity : 100 ml.

Triumph

Big Body shock absorbers for Triumph (pre- 2016)

€642.00

We designed these aluminum shocks in order to give a stronger look and a better shocks absorption to the Triumph Bonneville, Thruxton and Scrambler 865. It's adjustable in hydraulic compression and rebound thanks to a single knob, which makes it really easy to use, even while riding. It's the largest shock absorbers you can find for these Triumph models...

Triumph

2Win shock absorbers for Triumph (pre-2016)

€466.00

2Win aluminum shock absorbers for Triumph (before 2016 - air-cooled). These shocks are adjustable in spring preload and hydraulic. Each click of the knob changes the setting of hydraulic compression and rebound simultaneously, it's very easy to use even while riding. If you choose a shorter set than the original one, we recommend you to also go for our...

Triumph

Monza gas cap for Triumph

€150.00

Monza gas cap for Triumph Modern Classics. The timeless design of this Monza cap will perfectly suit your gas tank thanks to our adapter. Only suitable for Triumph Modern Classics: Air cooled (2000-2016) and new Liquid Cooled (since 2016). The full kit is composed by the polished aluminium gas cap, a seal, the necessary mounting hardware and the adapter....

View

Triumph

Motogadget M-Tri for Triumph (pre- 2016)

€199.50

Multiplexing M-Tri box manufactured by Motogadget for Triumph Bonneville, Scrambler and Thruxton EFI since 2011 (equipped with digital speedometer). Essential to remove your original speedometer, because without it the motorcycle will not start. This M-tri enables you keep all all the original features of your speedometer, in order to fit any kind of...

Triumph

Rear mudguard wiring harness for Triumph

€19.00

Rear mudguard wiring harness for Triumph. This wiring harness is necessary to connect an aftermarket set of turn indicators and taillight on your Triumph. It's plug & play over the factory connector, just make sure to select the right model. Comes standard with all the mudguards we sell for Triumph. Manufactured at BAAK's workshop in France.

View

Classic rear mudguard for Triumph (pre- 2016)

-15%

Triumph

Classic rear mudguard for Triumph (pre- 2016)

€255.00 €300.00

Time left

Classic rear mudguard for Triumph (pre-2016 - air-cooled) manufactured out of stainless steel. Shorter than your original Triumph rear mudguard, it has an elegant raw look thanks to the molded edge at its end. You will still keep good protection against the rear wheel projections. Equipped with a LED taillight (CE approved for road use) with license...

Classic Medium front mudguard for Triumph

-15%

Triumph

Classic Medium front mudguard for Triumph

€102.00 €120.00

Time left

Classic Medium front mudguard for Triumph, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled so you can easily fit it on the Triumph model of your choice. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, brushed and ready to...

Short rear mudguard for Triumph (pre- 2016)

-15%

Triumph

Heritage rear mudguard for Triumph (pre- 2016)

€306.00 €360.00

Time left

Heritage rear mudguard for Triumph (pre-2016 - air-cooled) manufactured out of stainless steel. It's shorter than your original Triumph rear mudguard, but it respects the original Triumph lines making it visually lighter, while keeping a good protection against the rear wheel projections. Equipped with a LED taillight (CE approved for road use) with...

-15%

Triumph

Mini front mudguard for Triumph

€140.25 €165.00

Time left

Mini front mudguard for Triumph, manufactured out of stainless steel. This front fender is very short, it enables you get a more compact look on the front end of your motorcycle. It's pre-drilled so you can easily fit it on your model of Triumph. It's designed and manufactured by our team at the workshop in France. It's available in satin black,...

Scrambler high front mudguard for Triumph Bonneville, Thruxton and Scrambler (pre-2016)

-15%

Triumph

Scrambler front mudguard for Triumph (pre-2016)

€242.25 €285.00

Time left

High front fender for Triumph (pre-2016 - air-cooled). This Scrambler look front mudguard is handcrafted out of stainless steel, and comes on the lower triple trees of your Triumph thanks to the provided black fixation bracket. It offers a good protection against the front wheel projections and a strong off road look to your motorcycle. Available in...

Triumph

Mini speedometer for Triumph (pre- 2016)

€689.00

Mini speedometer for Triumph Bonneville, Scrambler or Thruxton (before 2016 - air-cooled). It's designed to be assembled on a bracket developed by BAAK, manufactured out of aluminium aluminium, black powder coat painted. It comes assembled and connected to a compatible wiring harness (plug and play). Two fixation brackets available: Above the steering...

Triumph

Short leather seat kit for Triumph (pre- 2016)

€1,290.00

Short leather seat kit for Triumph (before 2016 - air-cooled). This leather seat kit enables you shorten the rear end of the motocycle to reach a more compact look while keeping two seatings to bring a passenger. No welding required. It comes with assembly instructions. Comes with: Machined aluminium short subframe system Genuine short leather seat...

Triumph

Bates headlight / integrated speedometer for Triumph (pre- 2016)

€650.00

Bates headlight with integrated speedometer for Triumph (pre-2016 - air-cooled). Here's how to purify your Triumph riding post while keeping all the original features of a speedometer. The Tiny speedometer shows the total daily mileage, LED indicator, oil pressure, high beam, gas reserve, hours, maximum speed and neutral. This part comes as plug &...

Triumph

Front mudguard fixation brackets for Triumph (pre- 2016)

€45.00

These stainless steel mudguard fixation bracket enables you to assemble the front fender of your choice on your Triumph Bonneville, Scrambler and Thruxton (before 2016 - air-cooled). They allow to adjust the height of the mudguard, it gets assembled on the original mudguard fixation. Product delivered by pairs.Made in France

Triumph

Classic headlight / integrated speedometer for Triumph (pre- 2016)

€840.00

Classic headlight with integrated speedometer for Triumph (pre-2016 - air-cooled). This Ø180mm satin black metal headlight with M8 side fixation, with a Motogadget Chronoclassic inserted in the casing is the right way to visually lighten your riding post while keeping advanced speedometer features. It comes as a plug & play part, pre-wired and...

Bates headlight plate for Triumph (pre-2016)

-15%

Triumph

Bates headlight plate for Triumph (pre-2016)

€143.65 €169.00

Time left

Bates type headlight plate for Triumph (pre- 2016 - air-cooled). Essential to hide the steering column and all the cables after the mounting of a Bates headlight. Comes with 4 black leather clamps in black, aged brown, gold or ruby color. Available in satin black and raw aluminium finish. Measurements : 220mm x 190mm.

Tiny Motogadget speedo fixation bracket for Triumph (pre- 2016)

-15%

Triumph

Tiny Motogadget speedo fixation bracket for Triumph (pre- 2016)

€41.65 €49.00

Time left

Tiny Motogadget speedometer fixation bracket for Triumph (pre-2016). It's a machined aluminium bracket, satin black powder coated. This part comes with all the necessary screwing.

Engine protection for Triumph (pre-2016)

-15%

Triumph

Engine protection for Triumph (pre-2016)

€97.75 €115.00

Time left

Aluminium engine protection / sump guard for Triumph (pre-2016 - air-cooled), gives an aesthetic style to your motorcycle and a better protection to your engine. Easy to assemble, comes with stainless steel screws. This skid plate is made by BAAK Motocyclettes team at our workshop in France. We use it on most of our Triumph custom projects. Width : 170mm

Triumph

Side number panel for Triumph (pre- 2016)

€120.00

Currently unavailable for sale Side number panel for Triumph (pre-2016 - air-cooled) manufactured out of aluminium. The number plate is placed on a side aluminium cover that comes to replace the original cover, with all the necessary stainless steel screwing system. Available for Right or Left side, with the side cover in Brushed or Satin black finish....

View

Rear turn indicators brackets for Triumph

-15%

Triumph

Rear turn indicators brackets for Triumph

€25.50 €30.00

Time left

Rear turn signals bracket for Triumph. Enables you to mount your turn signals on the upper shock absorber axles for a more discreet look. Compatible with the original passenger grab handle. Make sure to select the right model of motorcycle so you can receive brackets suitable for your motorcycle. Comes in pairs. Length: 50mm.

Front turn indicators bracket for Triumph

-15%

Triumph

Front turn indicators bracket for Triumph

€25.50 €30.00

Time left

Front turn indicators bracket / support for Triumph is simple, effective and very discreet. It enables you relocate your turn indicators under the steering column. It's stainless steel laser cut and satin black powder coated. It's particularly suitable for our Rectifier bracket for Triumph, or can be tightened on the upper fixation of the oil cooling...

Relocated ignition switch control bracket kit for Triumph (pre- 2016)

-15%

Triumph

Relocated ignition switch control bracket kit for Triumph (pre- 2016)

€41.65 €49.00

Time left

Relocated ignition switch control bracket for Triumph (pre-2016 - air-cooled). This simple ignition switch support enables you to relocate the ignition control between the fuel tank and the left carburetor. Fits on the right side on the injection models (EFI). It requires to move the wiring harness that is in your headlight, under the gas tank, without...

-15%

Triumph

Side license plate holder for Triumph

€80.75 €95.00

Time left

Side license plate support / holder for Triumph. It attaches to the upper axis of the left shock absorber. It comes with a connection wiring harness that makes it 100% plug and play. Satin black powder coat painting finish. If you choose the optional turn indicators, we'll provide the potential resistors necessary for their proper functioning according to...

Rectifier / turn indicators / horn bracket for Triumph (pre- 2016)

-15%

Triumph

Rectifier / turn indicators / horn bracket for Triumph (pre- 2016)

€41.65 €49.00

Time left

This bracket enables you to relocate your rectifier, front turn indicators and horn on a Triumph (pre-2016 - air-cooled) below your steering column. It visually lightens the line of the front of your motorcycle by grouping these parts on one bracket. This bracket is 21,8cm wide and 12cm high. It get assembled in the original place of your horn, under the...

Rectifier bracket for Triumph (pre- 2016)

-15%

Triumph

Rectifier bracket for Triumph (pre- 2016)

€25.50 €30.00

Time left

Rectifier relocation bracket for Triumph (pre-2016 - air-cooled). This bracket enables you to relocate the voltage rectifier, in place of the horn. Then the horn can be attached below, on the same bracket. It's manufactured out of aluminum laser cut. You may be obliged to move the original wiring harness under the gas tank. All the necessary screwing...

-15%

Triumph

Classic Mini front mudguard for Triumph

€91.80 €108.00

Time left

Classic Mini front mudguard for Triumph, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. We drill holes on this mudguard according to the model of Triumph you choose. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black, brushed and...

Triumph

Brembo brake pads for Triumph

€51.80

Brembo front brake pads for Triumph. Softer than the original ones, these front brake pads are manufactured out of high quality material that provides a perfect braking constancy, as much in cold or high temperature conditions. The friction coefficient is higher than on your original Triumph brake pads, which provide excellent braking performances and...

Leather dye, perfect for motorcycle seats

Leather dye, perfect for motorcycle seats 2

Parts

Leather dye cream

€24.00

This leather dye cream is a maintenance solution. It penetrates the leather and gives it a deep black tint. You can use it for your saddles but also for any other leather product: shoes, jackets, gloves, saddlebags, etc. Capacity: 200 ml. It's available for Black, Gold, Brown and Ruby (red) leather.Should be applied with a cloth, mixed with our...

Parts

Mirror adapter

€15.00

Handlebar adapters, required to mount some mirrors on your handlebar. We offer two different solutions : Adapter for ø22mm handlebars, to mount our mirrors in underbar position (M10 threading) Through rod type adapter, to mount a mirror on a through rod type fixation in classic or underbar position

Parts

Exhaust wrap

€69.00

Here are 15 meters (or 49') of exhaust wrap, 5 cm wide (1'' & 31/32), to wrap up your exhaust system and get the BAD BOY look you're aiming at! For the black color thermal wrap, we highly recommend you to paint it with an high temperature paint so the color can resist over the months. Available in Black or Beige color. This is high quality part,...

Parts

Short fork spring blocks

€19.00

Short fork spring blocks. To proportionally lower the front en of your Triumph or Moto Guzzi V7 when you fit our short shock absorbers, you will need these fork springs blocks. It's 2cm (25/32'') shorter and comes right in place of the original ones.

Stainless steel collars for exhaust wrap

Parts

Stainless steel collars for exhaust wrap

€24.00

This batch of 8 self-fruits in stainless steel will allow you to correctly attach the thermal strip to your exhaust. Don't tell us that you just go to do this with twisted thread. delivered by 8 units.

Parts

Universal 1 button control

€200.00

Universal 1 push button handlebar control, manufactured out of machined aluminum and available for 22mm (7/8") or 25,4mm (1") diameter handlebar. The push buttons can be linked to any functions on the motorcycle. This part has a satin black powder coating, and is designed to be riveted to your handlebar. Diameter : 30mm (1 & 3/16") / Thickness : 17mm...

Parts

Left 3-buttons universal switch

€300.00

Universal handlebar controls, including :- an ON/OFF/ON turn signal switch- a push button for the horn- a push button for full headlights (may require adaptation of a relay) Available for 22mm (7/8") or 25,4mm (1") diameter handlebar. This part has a satin black powder coating, and is designed to be riveted to your handlebar.

Parts

Flat Track handlebars Ø22mm

€90.00

Flat Track handlebar ø22mm manufactured out of steel, it enables you to get a more comfortable driving position and a better look. This handlebar has much pullback to the rider, and his flat Track look will make your bike handle better. Available in Ø22mm diameter only, and in Chromed or Brushed finish.