Bonneville (2000-2016)

Showing 1-24 of 51 item(s)

-15%

Parts

Leather Conditioner

€15.30 €18.00

This leather conditioner is a nourishing milk. It penetrates and nourishes the leather. You can use it for your saddles but also for your other leather products : shoes, jackets, gloves, saddlebags, etc. It comes with all the seat we offer. Capacity : 100 ml.

Triumph

Rear mudguard wiring harness for Triumph

€19.00

Rear mudguard wiring harness for Triumph. This wiring harness is necessary to connect an aftermarket set of turn indicators and taillight on your Triumph. It's plug & play over the factory connector, just make sure to select the right model. Comes standard with all the mudguards we sell for Triumph. Manufactured at BAAK's workshop in France.

View

Motogadget Tiny speedometer for Triumph (pre-2016)

-15%

Triumph

Motogadget Tiny speedometer for Triumph (pre-2016)

€585.65 €689.00

Motogadget Tiny speedometer for Triumph Bonneville, Scrambler or Thruxton (before 2016 – air-cooled) This speedometer is a Plug & Play solution to streamline your cockpit while retaining the original speedometer functions. It is delivered with everything needed depending on the selected motorcycle model (Mounting bracket, M-Tri multiplexing unit,...

Triumph

Bates headlight / integrated speedometer for Triumph (pre-2016)

€650.00

Bates headlight with integrated motogadget Tiny speedometer for Triumph (pre-2016 – air-cooled) Integrated into the housing of a ø150mm Bates headlight, this headlight with integrated speedometer is a Plug & Play solution to streamline your cockpit while keeping the functions of your original speedometer. This speedometer comes in a plug & play...

Triumph

Classic Headlight / Integrated Speedometer for Triumph (pre-2016)

€840.00

Classic headlight with integrated speedometer for Triumph (before 2016 – air-cooled) This needle speedometer, integrated into a Ø180mm satin black metal headlight with M8 side mounts, is the ideal way to visually lighten the front of your bike while retaining advanced speedometer functionalities. This speedometer is offered in a plug & play version,...

Bates headlight plate for Triumph (pre-2016)

-30%

Triumph

Bates headlight plate for Triumph (pre-2016)

€118.30 €169.00

Bates type headlight plate for Triumph (pre- 2016 - air-cooled). Essential to hide the steering column and all the cables after the mounting of a Bates headlight. Comes with 4 black leather clamps in black, aged brown, gold or ruby color. Available in satin black and raw aluminium finish. Measurements : 220mm x 190mm.

Tiny Motogadget speedo fixation bracket for Triumph (pre- 2016)

-30%

Triumph

Tiny Motogadget speedo fixation bracket for Triumph (pre- 2016)

€34.30 €49.00

Tiny Motogadget speedometer fixation bracket for Triumph (pre-2016). It's a machined aluminium bracket, satin black powder coated. This part comes with all the necessary screwing.

Side leather saddlebag for Triumph (pre- 2016)

-15%

Triumph

Side leather saddlebag for Triumph (pre- 2016)

€232.05 €273.00

Side leather saddlebag for Triumph (pre-2016 - air-cooled). This saddlebag is handcrafted in our workshop in the same leather as our seats. It enables you to transport some stuff and gives a retro distinguished look to your bike. It's available in Aged brown, gold, black leather. It comes mounting on a black satin painted aluminium plate that comes in...

Rear turn indicators brackets for Triumph

-35%

Triumph

Rear turn indicators brackets for Triumph

€19.50 €30.00

Rear turn signals bracket for Triumph. Enables you to mount your turn signals on the upper shock absorber axles for a more discreet look. Compatible with the original passenger grab handle. Make sure to select the right model of motorcycle so you can receive brackets suitable for your motorcycle. Comes in pairs. Length: 50mm.

Rear turn indicators brackets for Triumph (pre- 2016)

-35%

Triumph

Rear turn indicators brackets for Triumph (pre- 2016)

€19.50 €30.00

Rear turn indicators support for Triumph (pre-2016 - air-cooled). Simple, effective and very discreet. It's manufactured out of stainless steel, laser cut (3mm thick) and satin black powder coat painted. It fits with any rear fender. Delivered without turn signals. This part isn't suitable for the original (or accessory) passenger grab bar.

Front turn indicators bracket for Triumph

-35%

Triumph

Front turn indicators bracket for Triumph

€19.50 €30.00

Front turn indicators bracket / support for Triumph is simple, effective and very discreet. It enables you relocate your turn indicators under the steering column. It's stainless steel laser cut and satin black powder coated. It's particularly suitable for our Rectifier bracket for Triumph, or can be tightened on the upper fixation of the oil cooling...

Relocated ignition switch control bracket kit for Triumph (pre- 2016)

-35%

Triumph

Relocated ignition switch control bracket kit for Triumph (pre- 2016)

€31.85 €49.00

Relocated ignition switch control bracket for Triumph (pre-2016 - air-cooled). This simple ignition switch support enables you to relocate the ignition control between the fuel tank and the left carburetor. Fits on the right side on the injection models (EFI). It requires to move the wiring harness that is in your headlight, under the gas tank, without...

Rectifier / turn indicators / horn bracket for Triumph (pre- 2016)

-30%

Triumph

Rectifier / turn indicators / horn bracket for Triumph (pre- 2016)

€34.30 €49.00

This bracket enables you to relocate your rectifier, front turn indicators and horn on a Triumph (pre-2016 - air-cooled) below your steering column. It visually lightens the line of the front of your motorcycle by grouping these parts on one bracket. This bracket is 21,8cm wide and 12cm high. It get assembled in the original place of your horn, under the...

Leather dye, perfect for motorcycle seats

Leather dye, perfect for motorcycle seats 2

Parts

Leather dye cream

€24.00

This leather dye cream is a maintenance solution. It penetrates the leather and gives it a deep black tint. You can use it for your saddles but also for any other leather product: shoes, jackets, gloves, saddlebags, etc. Capacity: 200 ml. It's available for Black, Gold, Brown and Ruby (red) leather.Should be applied with a cloth, mixed with our...

Parts

Mirror adapter

€15.00

Handlebar adapters, required to mount some mirrors on your handlebar. We offer two different solutions : Adapter for ø22mm handlebars, to mount our mirrors in underbar position (M10 threading) Through rod type adapter, to mount a mirror on a through rod type fixation in classic or underbar position

Parts

H4 Yellow bulb

€12.00

Yellow H4 bulb for motorcycle lighthouse. This bulb adapts to any lighthouse equipped with an original H4 bulb. It allows you to provide the lighting of your machine with a resolutely vintage appearance, without affixing a filter on the window of your headlight. This product preserves the lighting qualities of your machine, to be favored with respect to...

Parts

21W turn indicators bulbs

209-405

€9.00

Transparent Mini Turn indicators bulbs, 21W, 12V. Comes in pair.

Parts

Universal 1 button control

€200.00

Universal 1 push button handlebar control, manufactured out of machined aluminum and available for 22mm (7/8") or 25,4mm (1") diameter handlebar. The push buttons can be linked to any functions on the motorcycle. This part has a satin black powder coating, and is designed to be riveted to your handlebar. Diameter : 30mm (1 & 3/16") / Thickness : 17mm...

Parts

Left 3-buttons universal switch

€300.00

Universal handlebar controls, including :- an ON/OFF/ON turn signal switch- a push button for the horn- a push button for full headlights (may require adaptation of a relay) Available for 22mm (7/8") or 25,4mm (1") diameter handlebar. This part has a satin black powder coating, and is designed to be riveted to your handlebar.

-40%

Parts

Headlight struts

€13.20 €22.00

Motorcycle headlight struts, manufactured out of aluminum, to perfectly adjust the position of your headlight. The hole diameter is ø8mm, the exterior diameter is ø29mm. For Moto Guzzi V7 Classic or Heritage headlight, choose the 10mm ones. For Triumph and Royal Enfield Classic or Heritage headlight, choose the 5mm ones. Comes in pairs.

-20%

Parts

Flat Track handlebars Ø22mm

€72.00 €90.00

Flat Track handlebar ø22mm manufactured out of steel, it enables you to get a more comfortable driving position and a better look. This handlebar has much pullback to the rider, and his flat Track look will make your bike handle better. Available in Ø22mm diameter only, and in Chromed or Brushed finish.

-40%

Parts

Leather cable guides

€4.80 €8.00

Leather cable guide. This strap enables you fasten your cables, or tie it together to your handlebars. If just like us, your motorcycle's finish is part of your obsessions, this cable guide is perfect for your project. Available in Aged brown, Black and Gold leather. Available in 80mm, 90mm, 115mm or 130mm length. Each strap is 20mm wide. Sold as a...

Parts

Mini 21W turn indicators

€19.00

Mini 21W turn indicators manufactured out of plastic, with 21W bulb and M10 fixation threading. These turn indicators offer a very good finish level. Sold in pairs. EU approved for road use.

-15%

Parts

Round mirror ø8 steel for motorcycle

€33.15 €39.00

Mini round mirror, Ø8cm diameter with M8 threading, for upper position. The mirror shaft is 13cm long, its shape was specifically designed to guaranty a good rear visibility and a discreet look. Suitable for motorcycles with M10 screwing original mirrors fixation. Sold by unit, available in satin black only. Fit both left and right sides.