Bonneville (2000-2016)

Showing 1-58 of 58 item(s)

Triumph

Big Body shock absorbers for Triumph (pre- 2016)

We designed these aluminum shocks in order to give a stronger look and a better shocks absorption to the Triumph Bonneville, Thruxton and Scrambler 865. It's adjustable in hydraulic compression and rebound thanks to a single knob, which makes it really easy to use, even while riding. It's the largest shock absorbers you can find for these Triumph models...

Triumph

2Win shock absorbers for Triumph (pre-2016)

€466.00

2Win aluminum shock absorbers for Triumph (before 2016 - air-cooled). These shocks are adjustable in spring preload and hydraulic. Each click of the knob changes the setting of hydraulic compression and rebound simultaneously, it's very easy to use even while riding. If you choose a shorter set than the original one, we recommend you to also go for our...

Triumph

Monza gas cap for Triumph

€150.00

Monza gas cap for Triumph Modern Classics. The timeless design of this Monza cap will perfectly suit your gas tank thanks to our adapter. Only suitable for Triumph Modern Classics: Air cooled (2000-2016) and new Liquid Cooled (since 2016). The full kit is composed by the polished aluminium gas cap, a seal, the necessary mounting hardware and the adapter....

Triumph

Motogadget M-Tri for Triumph (pre- 2016)

€199.50

Multiplexing M-Tri box manufactured by Motogadget for Triumph Bonneville, Scrambler and Thruxton EFI since 2011 (equipped with digital speedometer). Essential to remove your original speedometer, because without it the motorcycle will not start. This M-tri enables you keep all all the original features of your speedometer, in order to fit any kind of...

Aluminium side covers for Triumph (pre- 2016)

-35%

Triumph

Classic aluminum side covers for Triumph (pre- 2016)

€48.75 €75.00

Classic aluminum side covers for Triumph (before 2016 - air-cooled), available in Brushed or powder coated in Satin Black. It replaces your original plastic side covers. These parts will bring a strongest look to your motorcycle, using noble material while hiding the airbox. Comes with the necessary mounting bracket and hardware, available for right side...

Triumph

Rear mudguard wiring harness for Triumph

€19.00

Rear mudguard wiring harness for Triumph. This wiring harness is necessary to connect an aftermarket set of turn indicators and taillight on your Triumph. It's plug & play over the factory connector, just make sure to select the right model. Comes standard with all the mudguards we sell for Triumph. Manufactured at BAAK's workshop in France.

View

Classic rear mudguard for Triumph (pre- 2016)

-10%

Triumph

Classic rear mudguard for Triumph (pre- 2016)

€270.00 €300.00

Time left

Classic rear mudguard for Triumph (pre-2016 - air-cooled) manufactured out of stainless steel. Shorter than your original Triumph rear mudguard, it has an elegant raw look thanks to the molded edge at its end. You will still keep good protection against the rear wheel projections. Equipped with a LED taillight (CE approved for road use) with license...

Classic Medium front mudguard for Triumph

-20%

Triumph

Classic Medium front mudguard for Triumph

€96.00 €120.00

Classic Medium front mudguard for Triumph, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled so you can easily fit it on the Triumph model of your choice. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, brushed and ready to...

Short rear mudguard for Triumph (pre- 2016)

-20%

Triumph

Heritage rear mudguard for Triumph (pre- 2016)

€288.00 €360.00

Heritage rear mudguard for Triumph (pre-2016 - air-cooled) manufactured out of stainless steel. It's shorter than your original Triumph rear mudguard, but it respects the original Triumph lines making it visually lighter, while keeping a good protection against the rear wheel projections. Equipped with a LED taillight (CE approved for road use) with...

-20%

Triumph

Mini front mudguard for Triumph

€132.00 €165.00

Mini front mudguard for Triumph, manufactured out of stainless steel. This front fender is very short, it enables you get a more compact look on the front end of your motorcycle. It's pre-drilled so you can easily fit it on your model of Triumph. It's designed and manufactured by our team at the workshop in France. It's available in satin black,...

Scrambler high front mudguard for Triumph Bonneville, Thruxton and Scrambler (pre-2016)

-20%

Triumph

Scrambler front mudguard for Triumph (pre-2016)

€228.00 €285.00

High front fender for Triumph (pre-2016 - air-cooled). This Scrambler look front mudguard is handcrafted out of stainless steel, and comes on the lower triple trees of your Triumph thanks to the provided black fixation bracket. It offers a good protection against the front wheel projections and a strong off road look to your motorcycle. Available in...

Front mudguard for Triumph Bonneville (pre- 2016)

Bonneville (2000-2016)

Front mudguard for Triumph Bonneville (pre- 2016)

€165.00

Long and narrow front mudguard for Triumph Bonneville (pre-2016 - air-cooled). It's the narrowest front fender which enables you keep the original metal fixation legs. It's a stainless steel front fender, designed and manufactured in France at BAAK's workshop. It enables to keep a classic look and a good protection against the wheel projections. It's...

Triumph

Short leather seat kit for Triumph (pre- 2016)

€1,290.00

Short leather seat kit for Triumph (before 2016 - air-cooled). This leather seat kit enables you shorten the rear end of the motocycle to reach a more compact look while keeping two seatings to bring a passenger. No welding required. It comes with assembly instructions. Comes with: Machined aluminium short subframe system Genuine short leather seat...

Motogadget Tiny speedometer for Triumph (pre-2016)

-15%

Triumph

Motogadget Tiny speedometer for Triumph (pre-2016)

€585.65 €689.00

Motogadget Tiny speedometer for Triumph Bonneville, Scrambler or Thruxton (before 2016 – air-cooled) This speedometer is a Plug & Play solution to streamline your cockpit while retaining the original speedometer functions. It is delivered with everything needed depending on the selected motorcycle model (Mounting bracket, M-Tri multiplexing unit,...

Triumph

Bates headlight / integrated speedometer for Triumph (pre-2016)

€650.00

Bates headlight with integrated motogadget Tiny speedometer for Triumph (pre-2016 – air-cooled) Integrated into the housing of a ø150mm Bates headlight, this headlight with integrated speedometer is a Plug & Play solution to streamline your cockpit while keeping the functions of your original speedometer. This speedometer comes in a plug & play...

Front mudguard fixation brackets for Triumph (pre- 2016)

-40%

Triumph

Front mudguard fixation brackets for Triumph (pre- 2016)

€27.00 €45.00

These stainless steel mudguard fixation bracket enables you to assemble the front fender of your choice on your Triumph Bonneville, Scrambler and Thruxton (before 2016 - air-cooled). They allow to adjust the height of the mudguard, it gets assembled on the original mudguard fixation. Product delivered by pairs.Made in France

Triumph

Classic Headlight / Integrated Speedometer for Triumph (pre-2016)

€840.00

Classic headlight with integrated speedometer for Triumph (before 2016 – air-cooled) This needle speedometer, integrated into a Ø180mm satin black metal headlight with M8 side mounts, is the ideal way to visually lighten the front of your bike while retaining advanced speedometer functionalities. This speedometer is offered in a plug & play version,...

Bates headlight plate for Triumph (pre-2016)

-30%

Triumph

Bates headlight plate for Triumph (pre-2016)

€118.30 €169.00

Bates type headlight plate for Triumph (pre- 2016 - air-cooled). Essential to hide the steering column and all the cables after the mounting of a Bates headlight. Comes with 4 black leather clamps in black, aged brown, gold or ruby color. Available in satin black and raw aluminium finish. Measurements : 220mm x 190mm.

Tiny Motogadget speedo fixation bracket for Triumph (pre- 2016)

-30%

Triumph

Tiny Motogadget speedo fixation bracket for Triumph (pre- 2016)

€34.30 €49.00

Tiny Motogadget speedometer fixation bracket for Triumph (pre-2016). It's a machined aluminium bracket, satin black powder coated. This part comes with all the necessary screwing.

Engine protection for Triumph (pre-2016)

-35%

Triumph

Engine protection for Triumph (pre-2016)

€74.75 €115.00

Aluminium engine protection / sump guard for Triumph (pre-2016 - air-cooled), gives an aesthetic style to your motorcycle and a better protection to your engine. Easy to assemble, comes with stainless steel screws. This skid plate is made by BAAK Motocyclettes team at our workshop in France. We use it on most of our Triumph custom projects. Width : 170mm

Triumph

Side number panel for Triumph (pre- 2016)

€120.00

Currently unavailable for sale Side number panel for Triumph (pre-2016 - air-cooled) manufactured out of aluminium. The number plate is placed on a side aluminium cover that comes to replace the original cover, with all the necessary stainless steel screwing system. Available for Right or Left side, with the side cover in Brushed or Satin black finish....

View

Stainless steel silencers for Triumph (pre- 2016)

Bonneville (2000-2016)

Stainless steel silencers for Triumph (pre- 2016)

€996.00

Pair of stainless steel exhaust mufflers for Triumph Bonneville (pre-2016 - air-cooled). These silencers are handcrafted in France. Available in chromed or brushed finish, it offers a deep and smooth sound. Not compliant with European regulations. Their sound is quite discreet (less than 100 Db). It's lighter than your original mufflers and will improve...

Rear turn indicators brackets for Triumph

-35%

Triumph

Rear turn indicators brackets for Triumph

€19.50 €30.00

Rear turn signals bracket for Triumph. Enables you to mount your turn signals on the upper shock absorber axles for a more discreet look. Compatible with the original passenger grab handle. Make sure to select the right model of motorcycle so you can receive brackets suitable for your motorcycle. Comes in pairs. Length: 50mm.

Rear turn indicators brackets for Triumph (pre- 2016)

-35%

Triumph

Rear turn indicators brackets for Triumph (pre- 2016)

€19.50 €30.00

Rear turn indicators support for Triumph (pre-2016 - air-cooled). Simple, effective and very discreet. It's manufactured out of stainless steel, laser cut (3mm thick) and satin black powder coat painted. It fits with any rear fender. Delivered without turn signals. This part isn't suitable for the original (or accessory) passenger grab bar.

Front turn indicators bracket for Triumph

-35%

Triumph

Front turn indicators bracket for Triumph

€19.50 €30.00

Front turn indicators bracket / support for Triumph is simple, effective and very discreet. It enables you relocate your turn indicators under the steering column. It's stainless steel laser cut and satin black powder coated. It's particularly suitable for our Rectifier bracket for Triumph, or can be tightened on the upper fixation of the oil cooling...

Relocated ignition switch control bracket kit for Triumph (pre- 2016)

-35%

Triumph

Relocated ignition switch control bracket kit for Triumph (pre- 2016)

€31.85 €49.00

Relocated ignition switch control bracket for Triumph (pre-2016 - air-cooled). This simple ignition switch support enables you to relocate the ignition control between the fuel tank and the left carburetor. Fits on the right side on the injection models (EFI). It requires to move the wiring harness that is in your headlight, under the gas tank, without...

-30%

Triumph

Side license plate holder for Triumph

€66.50 €95.00

Side license plate support / holder for Triumph. It attaches to the upper axis of the left shock absorber. It comes with a connection wiring harness that makes it 100% plug and play. Satin black powder coat painting finish. If you choose the optional turn indicators, we'll provide the potential resistors necessary for their proper functioning according to...

Rectifier / turn indicators / horn bracket for Triumph (pre- 2016)

-30%

Triumph

Rectifier / turn indicators / horn bracket for Triumph (pre- 2016)

€34.30 €49.00

This bracket enables you to relocate your rectifier, front turn indicators and horn on a Triumph (pre-2016 - air-cooled) below your steering column. It visually lightens the line of the front of your motorcycle by grouping these parts on one bracket. This bracket is 21,8cm wide and 12cm high. It get assembled in the original place of your horn, under the...

Rectifier bracket for Triumph (pre- 2016)

-35%

Triumph

Rectifier bracket for Triumph (pre- 2016)

€19.50 €30.00

Rectifier relocation bracket for Triumph (pre-2016 - air-cooled). This bracket enables you to relocate the voltage rectifier, in place of the horn. Then the horn can be attached below, on the same bracket. It's manufactured out of aluminum laser cut. You may be obliged to move the original wiring harness under the gas tank. All the necessary screwing...

-20%

Triumph

Classic Mini front mudguard for Triumph

€86.40 €108.00

Classic Mini front mudguard for Triumph, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. We drill holes on this mudguard according to the model of Triumph you choose. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black, brushed and...

Triumph

Brembo brake pads for Triumph

€51.80

Brembo front brake pads for Triumph. Softer than the original ones, these front brake pads are manufactured out of high quality material that provides a perfect braking constancy, as much in cold or high temperature conditions. The friction coefficient is higher than on your original Triumph brake pads, which provide excellent braking performances and...

Parts

Mirror adapter

€15.00

Handlebar adapters, required to mount some mirrors on your handlebar. We offer two different solutions : Adapter for ø22mm handlebars, to mount our mirrors in underbar position (M10 threading) Through rod type adapter, to mount a mirror on a through rod type fixation in classic or underbar position

Parts

Exhaust wrap

€93.60

Here are 15 meters (or 49') of exhaust wrap, 5 cm wide (1'' & 31/32), to wrap up your exhaust system and get the BAD BOY look you're aiming at! For the black color thermal wrap, we highly recommend you to paint it with an high temperature paint so the color can resist over the months. Available in Black or Beige color. This is high quality part,...

-15%

Parts

Short fork spring blocks

€16.15 €19.00

Short fork spring blocks. To proportionally lower the front en of your Triumph or Moto Guzzi V7 when you fit our short shock absorbers, you will need these fork springs blocks. It's 2cm (25/32'') shorter and comes right in place of the original ones.

Stainless steel collars for exhaust wrap

Parts

Stainless steel collars for exhaust wrap

€24.00

This batch of 8 self-fruits in stainless steel will allow you to correctly attach the thermal strip to your exhaust. Don't tell us that you just go to do this with twisted thread. delivered by 8 units.

Parts

Universal 1 button control

€200.00

Universal 1 push button handlebar control, manufactured out of machined aluminum and available for 22mm (7/8") or 25,4mm (1") diameter handlebar. The push buttons can be linked to any functions on the motorcycle. This part has a satin black powder coating, and is designed to be riveted to your handlebar. Diameter : 30mm (1 & 3/16") / Thickness : 17mm...

Parts

Left 3-buttons universal switch

€300.00

Universal handlebar controls, including :- an ON/OFF/ON turn signal switch- a push button for the horn- a push button for full headlights (may require adaptation of a relay) Available for 22mm (7/8") or 25,4mm (1") diameter handlebar. This part has a satin black powder coating, and is designed to be riveted to your handlebar.

-20%

Parts

Flat Track handlebars Ø22mm

€72.00 €90.00

Flat Track handlebar ø22mm manufactured out of steel, it enables you to get a more comfortable driving position and a better look. This handlebar has much pullback to the rider, and his flat Track look will make your bike handle better. Available in Ø22mm diameter only, and in Chromed or Brushed finish.

-40%

Parts

Leather cable guides

€4.80 €8.00

Leather cable guide. This strap enables you fasten your cables, or tie it together to your handlebars. If just like us, your motorcycle's finish is part of your obsessions, this cable guide is perfect for your project. Available in Aged brown, Black and Gold leather. Available in 80mm, 90mm, 115mm or 130mm length. Each strap is 20mm wide. Sold as a...

Parts

Mini 21W turn indicators

€19.00

Mini 21W turn indicators manufactured out of plastic, with 21W bulb and M10 fixation threading. These turn indicators offer a very good finish level. Sold in pairs. EU approved for road use.

-15%

Parts

Round mirror ø8 steel for motorcycle

€33.15 €39.00

Mini round mirror, Ø8cm diameter with M8 threading, for upper position. The mirror shaft is 13cm long, its shape was specifically designed to guaranty a good rear visibility and a discreet look. Suitable for motorcycles with M10 screwing original mirrors fixation. Sold by unit, available in satin black only. Fit both left and right sides.

Parts

Biltwell Renegade handlebars grips

€22.00

Biltwell Renegade handlebar grips, produced by Biltwell for character motorcycle. It offers a better handtaking of your handlebar, a great riding comfort and an incredible look. Handlebar diameter 1" (ø25,4mm) or ø22mm. Comes in pairs. Available in Black only.

Parts

Biltwell Thruster handlebars grips

€22.00

Biltwell Thruster handlebar grips, manufactured by Biltwell for character motorcycle. It offers a better handtaking of your handlebar, a great riding comfort and an incredible look. Handlebar diameter 1" (ø25,4mm) or ø22mm. Comes in pairs. Available in Black and Brown color.

Parts

Leather covered handlebar grips

€145.00

Leather covered handlebars grips. Wrapped with a high quality leather, it gives a touch of chic to your motorcycle while keeping a good takeover. Available in aged brown, gold, black and ruby leather. Four thread stitchings colors available so it perfectly fits your bike. Available for ø25,4mm (1 inch) handlebars.

Aluminium handlebar grips for motocycles classic, vintage, cafe racer

Aluminium handlebar grips for motocycles classic, vintage, cafe racer 2

-40%

Parts

Motorcycle handlebar mounts, aluminum

€57.60 €96.00

Machined aluminium handlebar clamps for motorcycle. These risers are available in ø22mm diameter, ø28,6mm diameter or 1 inch (ø25,4mm) diameter, it's lighter and elegant. The clamps are satin black powder coat painted, and come with stainless steel screwing (size on the choice). Designed and manufactured at BAAK's workshop. Made in France

Classic ø10 round aluminum motorcycle mirror

Classic ø10 round aluminum motorcycle mirror 2

-15%

Parts

Classic ø10 round aluminum motorcycle mirror

€54.40 €64.00

Classic round motorcycle mirror. This black mirror, Ø10cm / diameter, has an impeccable yet discreet finish. It offers perfect rearward visibility and fits any motorcycle. Height-adjustable thanks to 150mm articulated rod. Supplied with two adapters (left-hand and right-hand M10x1.25 mm). Additional adapters are available as options. Approved to European...

Motorcycle mirror under handlebars round ø8 in steel

Motorcycle mirror under handlebars round ø8 in steel 2

-15%

Parts

Motorcycle mirror under handlebars round ø8 in steel

€38.25 €45.00

Mini black Ø80mm bike mirror especially designed to be mounted below the handlebar in lower position. It offers a very discreet look and a good rear visibility with its wide angle glass. Available without adapter (for Ø8mm through shaft mounting or with adapter for ø22mm handlebars). Sold individually. Fit both left and right sides, available in satin...

Parts

Leather fork gaiters

€240.00

Pair of genuine leather fork gaiters. These 4, 5, 6 or 8 folds fork boots are handcrafted in France, and bring a touch of authenticity and exception to your motorcycle. It's water-repellent and especially designed to resist to an intensive use. Available in Aged brown, black, gold leather color. Diameter Ø41mm top and Ø63mm bottom. It comes in pairs with...

Extension for Classic ø10 round motorcycle mirror in aluminium

Extension for Classic ø10 round motorcycle mirror in aluminium 2

-15%

Parts

Extension for Classic ø10 round motorcycle mirror in aluminium

€18.70 €22.00

Shaft extension for Classic round mirror. This extension is suitable only for our Classic round mirror. This part enables you make the mirror shaft longer for a better rear view, and makes it easier to adjust. This extension is 55mm long (35mm between holes). Supplied per unit.

Leather handlebar pad for motorcycle (black, brown, red, gold)

Parts

Leather handlebar pad

€75.00

Leather-covered handlebar pad. Appart from the protection brought by this pad in case of shock with your handlebar, his leather cover will bring a classic off road look to your motorcycle. Our craftsmen re-interpreted the codes of off road bar pads to give it an aesthetic use. The inner diameter for the crossbar is ø12mm, the external diameter of the pad...

License plate holder for US format side license plates

License plate holder for US format side license plates 2

-35%

Parts

License plate holder for US format side license plates

€29.25 €45.00

This license plate holder is suitable for US size license plates (vertical) mounted in side position. It's manufactured out of 3mm thick aluminium and it's satin black powder coat painted. This part is only suitable for BAAK side license plate holders.

Double optics headlight plate for motorcycles - BAAK

Double optics headlight plate for motorcycles - BAAK 2

Parts

Universal Trail headlight plate

€465.00

Our universal double optics headlight plate takes its inspiration from the 80's Trail universe. Perfect for a Scrambler project, this headlight plate is designed by our team and manufactured out of glass fiber. It includes a wiring harness extension and aluminium fixation brackets supposed to be assembled on the fork tubes (ø39 - ø40mm / ø41 - ø42mm /...

-15%

Universal

Universal handlebars controls kit

€168.30 €198.00

This Universal handlebars controls kit is essential to clear your cockpit. Each part of the kit must be purchased separately : Brake master cylinder Throttle Clutch lever This kit designed by our craftsmen shows a perfect finish level thanks to his assembly quality and satin black powder coat painting. These parts are available for classic and vintage...

-30%

Parts

BAAK N°1 handlebars Ø25,4mm

€111.30 €159.00

Wide stainless steel BAAK N°1 handlebars in Ø25,4mm (1 inch). It's flatter, wider and has more pullback / sweep to the rider than most of the other handlebars. It will offer a very distinguished look to your motorcycle, and improve its handling qualities and your riding position. It's available in Satin black and Brushed finish. The stainless steel tubes...

License plate holder for US format with light mount

License plate holder for US format with light mount 2

-35%

Parts

License plate holder for US format with light mount

€29.25 €45.00

This license plate holder is suitable for US size license plates (horizontal). It's manufactured out of 3mm thick aluminium and it's satin black powder coat painted. This support allows you to mount a license plate light. This part is only suitable for BAAK license plate holders.

Round handlebar mirror ø10 HIGHSIDER MONTANA-SLIM EVO SHORT

Round handlebar mirror ø10 HIGHSIDER MONTANA-SLIM EVO SHORT 2

Parts

Round Bar End mirror ø10 HIGHSIDER MONTANA-SLIM EVO SHORT

€84.00

Looking for a discreet, high-performance mirror? The HIGHSIDER MONTANA-SLIM EVO SHORT is for you. With a thickness of just 5 mm, a black anodized aluminum design and convex glass for optimum visibility, this mirror combines style and safety. Easy to install on handlebars from 12 to 22 mm, it complies with E standards for left- or right-hand use.

Classic ø10 round motorcycle mirror in aluminum, long stem

Parts

Classic ø10 round motorcycle mirror in aluminum, long stem

€66.00

The Classic HIGHSIDER MONTANA XL round motorcycle mirror combines elegance and functionality with its timeless design. Its black anodized finish, combined with an extended 25 mm stem, offers enhanced rear visibility. Designed to improve ergonomics and guarantee a minimalist look, it's perfect for vintage and custom motorcycles. Sold individually.

Bouchon plat de réservoir pour triumph 2

-30%

Parts

Flat fuel tank cap for Triumph

€40.60 €58.00

Black finish only, without locking system. Made with a black anodized treatment for long-lasting durability and impeccable style. This product was carefully selected by the BAAK workshop team for its elegant look and superior quality. It is easily installed as a direct replacement for the original cap.