Parts

Showing 1-184 of 184 item(s)

Home

Bates Headlight Kit - Fantic Caballero

Bates-style headlight for Fantic Caballero. This EU-approved headlight with lower mounting measures ø15cm in diameter. Metal housing and trim ring. Its discreet design enhances the look of the bike. This headlight is available in Brushed, Chrome, Satin Black, or Satin Black with Brushed or Chrome trim ring. It comes with a mounting plate adapted to the...

Parts

Slip On Exhaust for Triumph (2016 )

€660.00

This pair of mufflers deliver the perfect sound without drone or being obnoxious. Made from aluminum in our workshop in France in a limited production. You won’t see them everywhere… Very easy to install with their bolt on design, goes directly on the factory system.

Home

Radiator sides - Fantic Caballero

€75.00

radiator flanks for Fantic Caballero Protect your radiator with these protection flanks specially designed for the Fantic Caballero 500. manufactured in brushed aluminum. sold in pairs. They integrate harmoniously into the Caballero design and can be associated with other accessories for an even more assertive look. Compatibility: Caballero...

Triumph

Short exhaust for Triumph (2016-2024)

€1,220.00

Short Exhaust Line for Triumph T100 - T120 - Street Twin - Speed Twin 900 - Thruxton 1200 - Speed Twin 1200 (from 2016, liquid-cooled), designed and manufactured in our workshop. The headers are made of stainless steel, and the silencers are aluminum. This exhaust line delivers a deep, resonance-free sound that is not too loud. It is easy to install,...

Home

Classic - Fantic Caballero rear mud kit

€348.00

classic rear mudguard for Fantic Caballero in stainless steel. Its molded end gives it a classic and elegant look. It provides good protection against projections of the rear wheel. equipped with a rear light with LEDs with LEDs (CE approved), plate lighting (CE approved) Plug & amp; Play, a plate holder, rear indicators supports to choose from,...

Kit -Battle before high - Fantic Caballero

Home

Kit -Battle before high - Fantic Caballero

€249.00

high bold guard for Fantic Caballero. This front mudguard with a stainless steel scrambler look comes to mount in the high position on the lower fork tee of your machine thanks to our specific fixing plate. It offers good protection and the guarantee of an off -road look. available in 3 different finishes (brushed, shiny black, satin black). This kit...

Exhaust silencers for Triumph Bobber (2017)

Bonneville Bobber (2017 -...)

Exhaust silencers for Triumph Bobber (2017)

€765.00

Short exhaust silencers for Triumph Bobber 1200 (2017-...), designed and manufactured at our workshop in France. The stainless steel adapters connect to your catalytic converter (or X-Pipe). The mufflers are manufactured out of aluminium, and available in Brushed or Mat Black finish. This pair of silencers provides a rough and deep sound, without...

Based headlight plate - Fantic Caballero

Home

Based headlight plate - Fantic Caballero

€138.00

Plate for BATS Type type for Fantic Caballero. This aluminum plaque harmoniously mask the steering column and the cables that are on the way after assembling a front bars with lower fixing on your machine. its 4 black leather, brown or gold leather binding necklaces, keep it with your fork tubes. available in black satin and brushed aluminum finish....

Original counter support for Fantic Caballero

Home

Original counter support for Fantic Caballero

€49.00

original counter support for Caballero. This accessory allows you to shift your meter at the back of the handlebars to visually free the front of your machine. It is then above the tank. Your original counter becomes more discreet, a simple solution to offer an original look to your Fantic. Compatibility: Caballero 125-250-500 from 2018 to… + All...

Home

Lighthouse support Bates - Fantic Caballero

€24.00

Bat light fixing platinum for Fantic Caballero. This platinum is fixed on your lower fork tee and will allow you to mount a lower bread lighthouse on your machine. made of 4mm thick stainless steel. black satin epoxy paint. Caballero 125-250-500 from 2018 to… + All versions except flat track

Delocated contactor support - Fantic Caballero

Home

Delocated contactor support - Fantic Caballero

€29.00

Delocated contactor support for Caballero 500. This kit allows you to relocate your key contactor from its original location under the tank of your Fantic. The relocation of your key contactor leads to the loss of the steering locking system of your motorcycle.

Triumph

Rear mudguard for Bobber 1200 Triumph

€495.00

Rear mudguard for Bobber 1200 manufactured out of stainless steel. Shorter than your original rear mudguard, it has an elegant raw look thanks to the molded edge at its end. You will still keep good protection against the rear wheel projections.Made in France

Home

M8 Turn Signal Mount on Ø56 Fork Tube

€30.00

Front turn signal mount on fork tube Ø56, simple, efficient, and especially very discreet. Made of stainless steel with a rubber protection strip. This mount is specifically compatible with: Caballero 125-250-500 from 2018 to... + All versions Sold without turn signals.

Triumph

Tracker kit for Triumph Street Twin / T100 (2016)

€6,600.00

Our craftsmen designed this kit to turn the Triumph Street Twin and Bonneville T100 (2016-...) into Trackers. Our work focused on the aesthetic asked as much as on the handling to make these machines more exciting. Compact, clear-lined, aggressive... Many superlatives that will make your machine stand out from the mass once this kit is assembled on. Build...

Triumph

2Win shock absorbers for Triumph (2016)

€466.00

2 Win aluminum shock absorbers for Triumph (liquid-cooled - since 2016). These shocks are adjustable in spring preload and hydraulic.Each click of the knob changes the setting of hydraulic compression and rebound simultaneously, it's very easy to use even while riding. Available in 340mm and 350mm length. Shock absorbers manufactured in aluminum in...

Triumph

2Win shock absorbers for Triumph (pre-2016)

€466.00

2Win aluminum shock absorbers for Triumph (before 2016 - air-cooled). These shocks are adjustable in spring preload and hydraulic. Each click of the knob changes the setting of hydraulic compression and rebound simultaneously, it's very easy to use even while riding. If you choose a shorter set than the original one, we recommend you to also go for our...

Triumph

Big Body shock absorbers for Triumph (2016)

€642.00

We designed these aluminum shocks in order to give a stronger look and a better shocks absorption to the Triumph Modern Classic motorcycles. It's adjustable in hydraulic compression and rebound thanks to a single knob, which makes it really easy to use, even while riding. It's the largest shock absorbers you can find for these Triumph models (diam....

Triumph

Big Body shock absorbers for Triumph (pre- 2016)

€642.00

We designed these aluminum shocks in order to give a stronger look and a better shocks absorption to the Triumph Bonneville, Thruxton and Scrambler 865. It's adjustable in hydraulic compression and rebound thanks to a single knob, which makes it really easy to use, even while riding. It's the largest shock absorbers you can find for these Triumph models...

Triumph

Monza gas cap for Triumph

€150.00

Monza gas cap for Triumph Modern Classics. The timeless design of this Monza cap will perfectly suit your gas tank thanks to our adapter. Only suitable for Triumph Modern Classics: Air cooled (2000-2016) and new Liquid Cooled (since 2016). The full kit is composed by the polished aluminium gas cap, a seal, the necessary mounting hardware and the adapter....

Triumph

Motogadget M-Tri for Triumph (pre- 2016)

€199.50

Multiplexing M-Tri box manufactured by Motogadget for Triumph Bonneville, Scrambler and Thruxton EFI since 2011 (equipped with digital speedometer). Essential to remove your original speedometer, because without it the motorcycle will not start. This M-tri enables you keep all all the original features of your speedometer, in order to fit any kind of...

Triumph

Classic aluminum side covers for Triumph (2016)

€75.00

Classic side covers for liquid cooled Triumph (2016-...) designed and handcrafted in aluminum in our workshop in France. It replaces your original plastic side covers to bring a strongest look to your motorcycle, using noble material. Available for both left and right side. Comes with all the necessary stainless steel hardware. Available in Brushed or...

Triumph

Classic aluminum side covers for Triumph (pre- 2016)

€75.00

Classic aluminum side covers for Triumph (before 2016 - air-cooled), available in Brushed or powder coated in Satin Black. It replaces your original plastic side covers. These parts will bring a strongest look to your motorcycle, using noble material while hiding the airbox. Comes with the necessary mounting bracket and hardware, available for right side...

Turn indicators wiring harness for Triumph (2016-...)

Parts

Turn indicators wiring harness for Triumph (2016)

€29.00

This turn indicators wiring harness is necessary to fit new turn signals on your Triumph (2016-... I liquid cooled) without having to splice wires. This 160mm (6 &19/64") long wiring harness is plug and play on the original connectors of your motorcycle. This 160mm (6 &19/64") long wiring harness is perfect to achieve the assembly of aftermarket...

Triumph

Rear mudguard wiring harness for Triumph

€19.00

Rear mudguard wiring harness for Triumph. This wiring harness is necessary to connect an aftermarket set of turn indicators and taillight on your Triumph. It's plug & play over the factory connector, just make sure to select the right model. Comes standard with all the mudguards we sell for Triumph. Manufactured at BAAK's workshop in France.

Triumph

Bates headlight bracket for Triumph Thruxton 1200 / Speed Twin

€25.00

Bates headlight fixation bracket for Triumph Thruxton 1200 and Speed Twin. This bracket fits the lower fork triple trees of the Thruxton 1200 / Speed Twin and enables you mount any Bates headlight with a lower fixation on your motorcycle. Distance between the fixation holes axis : 113mm. 4mm thick machined aluminium. Satin black powder coat painting.

Triumph

Bates headlight bracket for wide triple trees for Triumph (2016)

€25.00

This Bates headlight fixation bracket fits the Triumph Bonneville T100 / T120 / Street Twin / Street Scrambler new generation (2016-...) equipped with our Wide fork triple yokes for Triumph. It's manufactured out of 4mm thick machined aluminium. Satin black powder coat painting.

Triumph

Classic rear mudguard for Triumph (2016 )

€300.00

Classic rear mudguard for Triumph (2016 - liquid-cooled) manufactured out of stainless steel. Shorter than your original rear mudguard, it has an elegant raw look thanks to the molded edge at its end. You will still keep good protection against the rear wheel projections. Equipped with a LED Bates taillight (CE approved for road use) with license plate...

Triumph

Classic rear mudguard for Triumph (pre- 2016)

€300.00

Classic rear mudguard for Triumph (pre-2016 - air-cooled) manufactured out of stainless steel. Shorter than your original Triumph rear mudguard, it has an elegant raw look thanks to the molded edge at its end. You will still keep good protection against the rear wheel projections. Equipped with a LED taillight (CE approved for road use) with license...

Triumph

Heritage rear mudguard for Triumph (2016 )

€360.00

Heritage rear mudguard for Triumph (2016 - liquid-cooled) manufactured out of stainless steel. It's shorter than your original mudguard, but it respect the original Triumph lines making it visually lighter, while keeping a good protection against the rear wheel projections. Equipped with a LED taillight (CE approved for road use) with integrated license...

Triumph

Heritage rear mudguard for Triumph (pre- 2016)

€408.00

Heritage rear mudguard for Triumph (pre-2016 - air-cooled) manufactured out of stainless steel. It's shorter than your original Triumph rear mudguard, but it respects the original Triumph lines making it visually lighter, while keeping a good protection against the rear wheel projections. Equipped with a LED taillight (CE approved for road use) with...

Triumph

Classic Medium front mudguard for Triumph

€120.00

Classic Medium front mudguard for Triumph, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled so you can easily fit it on the Triumph model of your choice. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, brushed and ready to...

Triumph

Mini front mudguard for Triumph

€165.00

Mini front mudguard for Triumph, manufactured out of stainless steel. This front fender is very short, it enables you get a more compact look on the front end of your motorcycle. It's pre-drilled so you can easily fit it on your model of Triumph. It's designed and manufactured by our team at the workshop in France. It's available in satin black,...

Triumph

Scrambler front mudguard for Triumph (pre-2016)

€285.00

High front fender for Triumph (pre-2016 - air-cooled). This Scrambler look front mudguard is handcrafted out of stainless steel, and comes on the lower triple trees of your Triumph thanks to the provided black fixation bracket. It offers a good protection against the front wheel projections and a strong off road look to your motorcycle. Available in...

Front mudguard for Triumph Bonneville (pre- 2016)

Bonneville (2000-2016)

Front mudguard for Triumph Bonneville (pre- 2016)

€165.00

Long and narrow front mudguard for Triumph Bonneville (pre-2016 - air-cooled). It's the narrowest front fender which enables you keep the original metal fixation legs. It's a stainless steel front fender, designed and manufactured in France at BAAK's workshop. It enables to keep a classic look and a good protection against the wheel projections. It's...

Triumph

Long cables kit for Triumph (2016)

€84.00

Long cables kit for Triumph (2016-...), it enables to mount wide handlebars on your motorcycle. This kit includes the front brake hose extension and the clutch cable. We use it on most of our custom Triumph builds.

Triumph

Lowering kit for Triumph T100-T120 (2016)

€1,260.00

Aluminium upper triple trees kit for lowering, available for Triumph Bonneville T100 / T120 / Street Twin (2016-... - liquid-cooled). It includes the flat upper triple tree, the handlebar clamps, the ignition switch and / or speedometer bracket, and the short Big Body shock absorbers. This lowering kit was designed and manufactured at our workshop. We use...

Triumph

Lowering kit for Triumph Thruxton 1200 / Speed Twin

€1,110.00

Aluminium upper triple trees kit for lowering, for Triumph Thruxton 1200 and Speed Twin (2016-...). This flat upper triple trees in machined aluminium has the same width as your original one but enables to lower the front end of your bike by 25mm without lifting up the fork tubes over the stock triple trees, for a perfect aesthetic result. Original...

Triumph

Heating grips removal kit for Triumph T120 (2016)

€54.00

Heating grips removal kit for Triumph Bonneville T120 (2016-...). This grips kit enables you assemble any handlebar on your T120 without having to cut notches in it to put the heated grips system back on. The grips are high quality Biltwell Thruster or Renegade ones (25,4mm diameter) which offer more comfort. Comes in pairs.

Triumph

Short leather seat kit for Triumph (2016)

€1,290.00

Short leather seat kit for Triumph (2016-... - liquid-cooled). It enables you reduce the original seat length to get a more compact look and the elegance of a leather seat while keeping two seatings. It comes with: Machined aluminium short subframe system (no welding) Genuine short leather seat Stainless steel mudguard with plate holder and bates...

Triumph

Original turn indicators brackets kit for Triumph (2016)

€30.00

Turn signals brackets kit to relocate the factory or accessories indicators from Triumph that have keyed connection, to visually lighten your motorcycle. The front bracket comes on your oil-cooler, and the rear brackets come on the shock absorbers axles. These bracket kit comes without turn indicators.

Triumph

Short leather seat kit for Triumph (pre- 2016)

€1,290.00

Short leather seat kit for Triumph (before 2016 - air-cooled). This leather seat kit enables you shorten the rear end of the motocycle to reach a more compact look while keeping two seatings to bring a passenger. No welding required. It comes with assembly instructions. Comes with: Machined aluminium short subframe system Genuine short leather seat...

Airbox removal kit for Triumph Bobber (2017)

Bonneville Bobber (2017 -...)

Airbox removal kit for Triumph Bobber (2017)

€225.00

This airbox removal kit for Triumph Bonneville Bobber (2017-...) enables you replaced the original plastic airbox by an elegant leather protection part and two air filters and a crankcase breather. The air filters and breather are available in polished, satin black and brushed version. Appart from the aesthetic aspect, this modification leads to a slight...

Triumph

Wide fork triple trees kit for Triumph T100-T120 (2016)

€1,200.00

Wide fork triple yokes kit for Triumph Bonneville T100 / T120 (2016-... - liquid-cooled), it enables you mount a wide front tire (3.50). The kit includes the upper and lower triple trees 20mm wider, the lower bearing, the brake discs struts, the handlebar clamps and the wheel axle. Enable to lower the front end by 25mm. This kit is used on our Triumph...

Triumph

Mini speedometer for Triumph (pre- 2016)

€689.00

Mini speedometer for Triumph Bonneville, Scrambler or Thruxton (before 2016 - air-cooled). It's designed to be assembled on a bracket developed by BAAK, manufactured out of aluminium aluminium, black powder coat painted. It comes assembled and connected to a compatible wiring harness (plug and play). Two fixation brackets available: Above the steering...

Triumph

Front mudguard fixation brackets for Triumph (pre- 2016)

€45.00

These stainless steel mudguard fixation bracket enables you to assemble the front fender of your choice on your Triumph Bonneville, Scrambler and Thruxton (before 2016 - air-cooled). They allow to adjust the height of the mudguard, it gets assembled on the original mudguard fixation. Product delivered by pairs.Made in France

Triumph

Front mudguard fixation brackets for Triumph (2016)

€45.00

Front mudguard fixation brackets for Triumph (2016-... - liquid-cooled) manufactured out of stainless steel. The fixation brackets enable you adjust the height of your front fender, while guiding the cables along the fork. It particularly useful if you change the diameter of your front wheel. Comes in pair, with stainless steel screws kit, without...

Triumph

Bates headlight / integrated speedometer for Triumph (pre- 2016)

€650.00

Bates headlight with integrated speedometer for Triumph (pre-2016 - air-cooled). Here's how to purify your Triumph riding post while keeping all the original features of a speedometer. The Tiny speedometer shows the total daily mileage, LED indicator, oil pressure, high beam, gas reserve, hours, maximum speed and neutral. This part comes as plug &...

Triumph

Classic headlight / integrated speedometer for Triumph (pre- 2016)

€840.00

Classic headlight with integrated speedometer for Triumph (pre-2016 - air-cooled). This Ø180mm satin black metal headlight with M8 side fixation, with a Motogadget Chronoclassic inserted in the casing is the right way to visually lighten your riding post while keeping advanced speedometer features. It comes as a plug & play part, pre-wired and...

Triumph

Bates headlight plate for Triumph (pre-2016)

€169.00

Bates type headlight plate for Triumph (pre- 2016 - air-cooled). Essential to hide the steering column and all the cables after the mounting of a Bates headlight. Comes with 4 black leather clamps in black, aged brown, gold or ruby color. Available in satin black and raw aluminium finish. Measurements : 220mm x 190mm.

Triumph

Tiny Motogadget speedo fixation bracket for Triumph (pre- 2016)

€49.00

Tiny Motogadget speedometer fixation bracket for Triumph (pre-2016). It's a machined aluminium bracket, satin black powder coated. This part comes with all the necessary screwing.

Bmw

Turn indicators holder cover for BMW NineT

€30.00

Front turn indicators holder cover for BMW NineT. These black aluminium bracket covers are particularly useful to keep a clean finish if you replace the original front blinkers. Designed and manufactured in our Lyon workshop in aluminum and powder coated in black. Comes in pair with the necessary hardware for the assembly.

Triumph

Side number panel for Triumph (2016)

€120.00

Side number panel for Triumph (2016-...) manufactured out of aluminium. The number plate is placed on a side aluminium cover that comes to replace the original cover, with all the necessary screwing system. Available for Right or Left side, with the side cover in Brushed or Satin black finish. Made in France

Triumph

Side number panel for Triumph (pre- 2016)

€134.40

Side number panel for Triumph (pre-2016 - air-cooled) manufactured out of aluminium. The number plate is placed on a side aluminium cover that comes to replace the original cover, with all the necessary stainless steel screwing system. Available for Right or Left side, with the side cover in Brushed or Satin black finish. Made in France

Parts

Turn indicators wiring harness for BMW NineT

€29.00

Turn indicators wiring harness for BMW R NineT. These connectors enable you to connect any universal 10W turn indicators to the original wiring harness of your BMW NineT without having to cut or solder any wire. Comes in pair. Total length: 360mm (14")

Triumph

Engine protection for Triumph (2016)

€129.40

This sump guard / engine protection is manufactured out of stainless steel. It will give a stronger look to Triumph (2016-... - liquid-cooled). It's 1,5mm thick, and ensures a good protection to your engine against impacts and front wheel splashes. Available in Satin black or Brushed finish. It comes with all the necessary stainless steel screwing kit.

Triumph

Engine protection for Triumph (pre-2016)

€115.00

Aluminium engine protection / sump guard for Triumph (pre-2016 - air-cooled), gives an aesthetic style to your motorcycle and a better protection to your engine. Easy to assemble, comes with stainless steel screws. This skid plate is made by BAAK Motocyclettes team at our workshop in France. We use it on most of our Triumph custom projects. Width : 170mm

Triumph

Side leather saddlebag for Triumph (pre- 2016)

€287.40

Side leather saddlebag for Triumph (pre-2016 - air-cooled). This saddlebag is handcrafted in our workshop in the same leather as our seats. It enables you to transport some stuff and gives a retro distinguished look to your bike. It's available in Aged brown, gold, black leather. It comes mounting on a black satin painted aluminium plate that comes in...

Triumph

Side leather saddlebag for Triumph (2016)

€273.00

Side leather saddlebag for Triumph (2016-...). This saddlebag is handcrafted at our workshop in the same leather as our seats. It enables you to transport some stuff and gives a retro distinguished look to your bike. It's available in Aged brown, gold, black leather. Saddlebag measurements: 20cm x 20cm x 7cm. It comes mounting on a Brushed or Satin black...

Classic Medium front mudguard for BMW NineT

Bmw

Classic Medium front mudguard for BMW NineT

€381.00

Classic Medium front mudguard for BMW NineT, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled, comes with its satin black powder coated fixation bracket suitable for the selected model and the stainless steel screws required. It's designed and manufactured by our team at the workshop in...

Bmw

Classic rear mudguard for BMW NineT

€423.00

Classic rear mudguard for BMW R 1200 NineT manufactured out of stainless steel. It has an elegant raw look thanks to the molded edge at its end. You will still keep good protection against the rear wheel projections. Equipped with a LED taillight (CE approved for road use) with license plate lightning, a rear license plate holder, rear turn indicators...

Parts

Flat leather seat for Triumph (2016)

€690.00

Flat cafe racer leather saddle for Triumph T100 / T120. Narrower (-2,5cm) than your original seat, with a touch a suede leather on the front, it will give your Triumph an elegant look and considerably improve its finish level. It has a 6cm foam height that provides a good riding comfort. This seat is manufactured by our craftsmen at BAAK's workshop in...

Classic Mini front mudguard for BMW NineT

Bmw

Classic Mini front mudguard for BMW NineT

€285.00

Classic Mini front mudguard for BMW R 1200 NineT, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled, comes with its satin black powder coated fixation bracket suitable for the selected model and the stainless steel screws required. It's designed and manufactured by our team at the...

Bmw

Medium front mudguard for BMW NineT

€285.00

Medium front mudguard for BMW R 1200 NineT, manufactured out of stainless steel. It's short but it's still long enough to protect you from the front wheel splashes. It's pre-drilled, comes with its satin black powder coated fixation bracket suitable for the selected model and the stainless steel screws required. It's designed and manufactured by our team...

Classic leather seat for Triumph SpeedTwin (2019)

Speed Twin 1200 (2019 -...)

Classic leather seat for Triumph SpeedTwin (2019)

€690.00

Classic leather seat for Triumph Speed Twin (2019-...). This seat has the same shape as your original Speed Twin one, with the elegance of a leather cover it will highly improve the finish level of your Triumph. The riding comfort will be the same as with your original seat. This seat is manufactured by our craftsmen at BAAK's workshop in France. It's...

Bmw

Mini front mudguard for BMW NineT

€285.00

Mini front mudguard for BMW R 1200 NineT, manufactured out of stainless steel. This front fender is very short, it enables you visually lighten the front of your NineT. It's pre-drilled, comes with its satin black powder coated fixation bracket suitable for the selected model and the stainless steel screws required. It's designed and manufactured by our...

Triumph

Heritage leather seat for Triumph (2016)

€690.00

Classic leather seat for Triumph T120 and T100 (2016-... - liquid-cooled). This seat is narrower (-2,5cm) than your original seat, the shape of its leather cover will give it a more thin and compact look, and highly improve the finish level of your Triumph. It has a 6cm foam height that provides a good riding comfort. This seat is manufactured by our...

Bmw

Scrambler front mudguard for BMW NineT

€285.00

High front fender for BMW R NineT 1200. This Scrambler look front mudguard is handcrafted out of stainless steel, and gets assembled on the lower triple trees of your BMW NineT thanks to the provided fixation bracket. It offers a good protection and a strong off road look to your motorcycle. Available in Glossy black, Satin black, Brushed and Polished...

Racer leather seat for Triumph Thruxton 1200

Thruxton 1200 (2016 -...)

Racer leather seat for Triumph Thruxton 1200

€695.00

Racer leather seat for Triumph Thruxton 1200 (2016-...). This seat has the same shape as the optional Triumph single-seater one, with the elegance of a leather cover it will highly improve the finish level of your Triumph. The riding comfort will be the same as with your original seat, it's perfect to turn your ride into a pure cafe racer. This seat is...

Aluminium wheel arch for BMW R 1200 NineT by BAAK

Aluminium wheel arch for BMW R 1200 NineT by BAAK 2

Bmw

Aluminium wheel arch for BMW NineT

€125.00

Aluminium wheel arch for BMW R 1200 NineT. This wheel arch enables you get a perfect finish result once your rear fender is removed. It's equipped with a LED taillight, it comes with its plug & play wiring harness for taillight, and its fixation kit. It's satin black powder coat painted so it can resist over the years. Suitable for BMW R NineT...

Bmw

Bates headlight plate for BMW NineT

€169.00

Headlight plate for Bates headlight for BMW R NineT. This aluminium plate enables to hide the steering column and the cables after the assembly of a Bates headlight on your NineT. Handcrafted out of aluminium, it's available in Satin black or Raw aluminium finish. Compatible with a Bates headlight or the original headlight. The leather fixation collars...

Stainless steel silencers for Triumph (pre- 2016)

Bonneville (2000-2016)

Stainless steel silencers for Triumph (pre- 2016)

€996.00

Pair of stainless steel exhaust mufflers for Triumph Bonneville (pre-2016 - air-cooled). These silencers are handcrafted in France. Available in chromed or brushed finish, it offers a deep and smooth sound. Not compliant with European regulations. Their sound is quite discreet (less than 100 Db). It's lighter than your original mufflers and will improve...

Parts

Classic leather seat for BMW R NineT

€1,050.00

Classic leather seat for BMW R 1200 NineT. This seat is handcrafted at BAAK's workshop, based on an original BMW seat pan ensuring the compatibility with your NineT. It's a two-seater model. Available in Aged brown, Gold, Black genuine leather, it offers a chic touch to your motorcycle. Choose a classic, squares or diamonds quilting style on the top...

Triumph

Stainless steel silencers for Triumph T100-T120 (2016)

€1,095.00

Pair of stainless steel exhaust mufflers for Triumph Bonneville T100 / T120 (2016-... - liquid cooled). These silencers are manufactured in France. Available in Polished, Brushed or Matt black finish, it offers a deeper and smooth sound. Not compliant with European regulations. But It sounds quite discreet (less than 100 Db). Comes in pairs with all the...

Parts

Heritage leather seat for BMW R NineT

€870.00

Heritage leather seat for BMW R 1200 NineT. This seat is handcrafted at BAAK's workshop, based on an original BMW seat pan ensuring the compatibility with your NineT. It's a two-seater model. Available in Aged brown, Gold, Black genuine leather. The suede leather applied on the front provide a very elegant contrast. Choose a classic, squares or diamonds...

Stainless steel silencers for Triumph Thruxton 1200 / Speed Twin

Thruxton 1200 (2016 -...)

Stainless steel silencers for Triumph Thruxton 1200 / Speed Twin

€1,015.00

Pair of stainless steel exhaust mufflers for Triumph Thruxton 1200 (liquid cooled). These silencers are manufactured in France and available in Polished or Brushed finish. It offers a deep and smooth sound. Not compliant with European regulations, but it sounds reasonably loud (less than 100 Db). It comes in pairs with all the necessary mounting hardware...

Parts

Rear mudguard wiring harness for BMW NineT

€19.00

Rear fender wiring harness for BMW R NineT. This connector enables you connect any rear taillight (light / brake light) to the original wiring harness of your BMW NineT without having to cut or weld any wire. Sold individually. Total length: 160mm. This wiring harness initially comes with all our NineT rear mudguards.

Triumph

Rear turn indicators brackets for Triumph

€30.00

Rear turn signals bracket for Triumph. Enables you to mount your turn signals on the upper shock absorber axles for a more discreet look. Compatible with the original passenger grab handle. Make sure to select the right model of motorcycle so you can receive brackets suitable for your motorcycle. Comes in pairs. Length: 50mm.

Triumph

Rear turn indicators brackets for Triumph (pre- 2016)

€30.00

Rear turn indicators support for Triumph (pre-2016 - air-cooled). Simple, effective and very discreet. It's manufactured out of stainless steel, laser cut (3mm thick) and satin black powder coat painted. It fits with any rear fender. Delivered without turn signals. This part isn't suitable for the original (or accessory) passenger grab bar.

Bmw

Speedometer lowering kit for BMW NineT

€22.00

Lowering kit for BMW NineT speedometer. These 4 struts enable you lower your original NineT speedometer by 10mm, to get a clear riding post. Suitable for BMW NineT Pure, Scrambler, Racer and Urban GS.

Triumph

Front turn indicators bracket for Triumph

€30.00

Front turn indicators bracket / support for Triumph is simple, effective and very discreet. It enables you relocate your turn indicators under the steering column. It's stainless steel laser cut and satin black powder coated. It's particularly suitable for our Rectifier bracket for Triumph, or can be tightened on the upper fixation of the oil cooling...

Bmw

Air filters kit for BMW NineT

€278.40

Air filters kit for BMW NineT. This kit includes two black air filters and a red oil breather. The air filters plug directly on the intake, in place of the original air intake pipes of your BMW NineT. No power or torque improvement with this kit, it's simply an aesthetic modification. We recommend you to go for our Aluminium battery box along with this...

Side speedometer holder for Triumph Street Twin / Street Scrambler

Parts

Side speedometer holder for Triumph Street Twin / Street Scrambler

€89.00

Side speedometer holder for Triumph Street Twin / speed Twin 900 / Street Scrambler. This part enables you to relocate your speedometer on the right or left of the ignition switch to visually lighten the front of your motorcycle. It mounts on the left or right fork tube.

Black adjustable shock absorber for BMW R 1200 NineT by BAAK

Black adjustable shock absorber for BMW R 1200 NineT by BAAK 2

Parts

Shock absorber for BMW NineT

€420.00

Big Body shock absorber for BMW R 1200 NineT 1200 (2017-...). This mono shock absorber is manufactured in France by our partner Shock Factory. It offers a finish level and look that can't be compared to the original one. It's easy to adjust thanks to one only synchronized knob which adjust both compression and relaxation (48 different levels of setting)...

Triumph

Relocated ignition switch control bracket for Triumph (2016)

€30.00

Ignition switch control relocation bracket for Triumph (2016-... - liquid-cooled). It enables to relocate the ignition switch control under the gas tank. Manufactured in inox laser cut. You'll be obliged to relocate your wiring harness under your gas tank. Comes with all the necessary stainless steel screwing. The relocation of your ignition switch...

Side leather saddlebag for BMW NineT by BAAK

Side leather saddlebag for BMW NineT by BAAK 2

Parts

Side leather saddlebag for BMW R NineT

€289.99

This side leather saddlebag for BMW R 1200 NineT comes in place of your original air intake. His manufacturing is based on an aluminium plate that guarantees a rigid fixing on the machine, wrapped with leather to create a result that is harmonious with your gas tank shape. This saddlebag is available in Aged brown, black, gold leather.

Triumph

Relocated ignition switch control bracket kit for Triumph (pre- 2016)

€49.00

Relocated ignition switch control bracket for Triumph (pre-2016 - air-cooled). This simple ignition switch support enables you to relocate the ignition control between the fuel tank and the left carburetor. Fits on the right side on the injection models (EFI). It requires to move the wiring harness that is in your headlight, under the gas tank, without...

Triumph

Side license plate holder for Triumph

€95.00

Side license plate support / holder for Triumph. It attaches to the upper axis of the left shock absorber. It comes with a connection wiring harness that makes it 100% plug and play. Satin black powder coat painting finish. If you choose the optional turn indicators, we'll provide the potential resistors necessary for their proper functioning according to...

Triumph

License plate holder for Triumph original mudguard (pre- 2016)

€206.02

License plate holder for Triumph original mudguard (pre-2016 - air-cooled). This license plate support includes a taillight (EU approved), an integrated license plate lightning, a plug & play wiring harness, turn indicators fixation bracket on choice and optional turn indicators. Designed and manufactured at our workshop in France.

License plate holder for Triumph Bobber original mudguard (2017)

Bonneville Bobber (2017 -...)

License plate holder for Triumph Bobber original mudguard (2017)

€199.00

License plate holder for the original mudguard of the Triumph Bonneville Bobber (2017-...). This taillight / license plate support unit comes in place of the original part. It's equipped with an EU approved LED vintage taillight with LED integrated license plate lightning, a license plate triangle, a plug & play wiring harness, optional turn...

Triumph

Rectifier / turn indicators / horn bracket for Triumph (pre- 2016)

€49.00

This bracket enables you to relocate your rectifier, front turn indicators and horn on a Triumph (pre-2016 - air-cooled) below your steering column. It visually lightens the line of the front of your motorcycle by grouping these parts on one bracket. This bracket is 21,8cm wide and 12cm high. It get assembled in the original place of your horn, under the...

Triumph

Rectifier bracket for Triumph (2016)

€45.00

Rectifier bracket for Triumph (2016-... - liquid-cooled). This bracket enables you to relocate your rectifier behind your engine oil cooler instead of the lower fork trees to lighten the front of your bike. Manufactured out of stainless steel laser cut. You'll be obliged to relocate your wiring harness under your gas tank. Comes with all the necessary...

Triumph

Rectifier bracket for Triumph (pre- 2016)

€30.00

Rectifier relocation bracket for Triumph (pre-2016 - air-cooled). This bracket enables you to relocate the voltage rectifier, in place of the horn. Then the horn can be attached below, on the same bracket. It's manufactured out of aluminum laser cut. You may be obliged to move the original wiring harness under the gas tank. All the necessary screwing...

License plate holder triangle for Triumph Thruxton / Speed Twin 1200

Thruxton 1200 (2016 -...)

License plate holder triangle for Triumph Thruxton / Speed Twin 1200

€55.00

License plate holder triangle for rear fender eliminator kit of Triumph Thruxton 1200 or Speed Twin 1200 (2016-...). This support is dedicated to be assembled on the optional Rear fender removal kit offered by Triumph Motorcycles, or stands for a Short license plate holder for original rear fender on a Speed Twin. It enables you to remove the reflectors...

Triumph

Short Full Black exhaust Triumph (2016-...)

€1,680.00

Short Full Black Exhaust Line for Triumph T100 - T120 - Street Twin - Speed Twin 900 - Thruxton 1200 - Speed Twin 1200 (2016 to 2024 - liquid-cooled), featuring a matte black ceramic coating, designed and manufactured in our workshop. The headers are made of stainless steel, and the silencers are aluminum. This exhaust line delivers a deep,...

Classic Medium front mudguard for Triumph Bobber

Bonneville Bobber (2017 -...)

Classic Medium front mudguard for Triumph Bobber

€210.00

Classic Medium front mudguard for Triumph Bonneville Bobber (2017-...), manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled and comes with its mudguard fixation brackets so it can be easily fitted on your Triumph Bobber. This front fender isn't suitable for Triumph Bobber Black, Bobber TFC...

Classic mini front mudguard for Triumph Bobber

Bonneville Bobber (2017 -...)

Classic mini front mudguard for Triumph Bobber

€210.00

Classic Mini front mudguard for Triumph Bonneville Bobber (2017-...), manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled and comes with its fixation brackets so it can be easily fitted on your Triumph Bobber. This front fender isn't compatible with the models Bobber Black, Bobber TFC and...

Bonneville Bobber (2017 -...)

Mini front mudguard for Triumph Bobber

€210.00

Mini front mudguard for Triumph Bonneville Bobber (2017-...), manufactured out of stainless steel. This front fender is very short, it enables you get a more compact look on the front end of your motorcycle. It's pre-drilled and comes with its fixation bracket so it can be easily fitted on your Triumph Bobber. This front fender isn't suitable for the...

Leather seat for Triumph Bobber 1200 (2017-...)

Bonneville Bobber (2017 -...)

Leather seat for Triumph Bobber

€600.00

Leather seat for Triumph Bonneville Bobber 1200 (2017-...). This seat has the same shape as your original one, and a perfect finish level thanks to the great quality leather we selected and its diamonds-shape quilting on the seating area. This seat is manufactured by our craftsmen at BAAK's workshop in France. It's available in Aged brown, Black, Gold...

Triumph

Intake covers for Triumph 900 (2016)

€77.00

Pair of aluminium intake covers for Triumph (2016-...). These covers come in place of the original ones to give a better aesthetic look to your motorcycle. It's suitable for Triumph Street Twin / Street Cup and Bonneville T100 (2016-...). It comes by pair. It's available in Satin black and Brushed finish. It comes with all the necessary mounting...

Triumph

License plate holder kit for Triumph Thruxton 1200 / Speed Twin 1200

€210.00

License plate holder kit for Triumph Thruxton 1200 and Speed Twin EUR4 / EUR5 (2016-...). This simple satin black aluminium wheel arch visually lightens the tail of these two Triumph models to reach a more radical aesthetic. This kit includes a LED taillight (CE approved) with license plate lightning, a license plate holder on choice (side or classic...

Triumph

Scrambler front mudguard for Triumph (2016)

€333.00

High front fender for Triumph (2016-... - liquid-cooled). This high Scrambler look front mudguard is handcrafted out of stainless steel, and comes on the lower triple trees of your Triumph thanks to the provided black fixation bracket. It offers a good protection against the front wheel projections and a strong off road look to your motorcycle. Available...

Adjustable shock absorber for Triumph Bobber 1200 I BAAK

Bonneville Bobber (2017 -...)

Shock absorber for Triumph Bobber 1200

€420.00

Big Body shock absorber for Triumph Bobber 1200 (2017-...). This mono shock absorber is manufactured in France by our partner Shock Factory. It offers a finish level and look that can't be compared to the original one. It's easy to adjust thanks to one only knob which adjust both compression and relaxation (48 different levels of setting) in a...

Triumph

Big Body shock absorbers for Triumph Thruxton 1200 / Speed Twin (2016)

€642.00

Wide Big Body shock absorbers for Triumph Thruxton 1200 and Speed Twin 1200 (2016-...). With our manufacturing partner, we designed these aluminium shocks in order to give a stronger look and a better shocks absorption skills to the Triumph Modern Classic motorcycles. It's adjustable in hydraulic compression and relaxation thanks to an only knob, which...

Triumph

Bates headlight plate for Triumph (2016)

€169.00

Bates headlight plate for Triumph (since 2016 - liquid-cooled). This aluminium plate comes to hide the steering column and cables running around after you mounted a Bates headlight (with lower fixation) on your Triumph. The 4 leather collars (brown, black, gold or ruby color) attach the plate to your fork tubes. Available in Satin black or Brushed...

Side leather saddlebag for Triumph Thruxton 1200 and Speed Twin

Side leather saddlebag for Triumph Thruxton 1200 and Speed Twin 2

Speed Twin 1200 (2019 -...)

Side leather saddlebag for Triumph Thruxton 1200 / Speed Twin (2016)

€287.40

Side leather saddlebag for Triumph Thruxton 1200 / Thruxton R / Speed Twin (2016-...). This side bag is handcrafted at our workshop using the same leather as on our seats. It enables you transport some stuff and gives a retro distinguished look to your Triumph. It's available in Aged brown, gold, black leather. Saddlebag measurements: 20cm x 20cm x 7cm....

Triumph

Mini speedometer Tiny for Triumph (2016)

€1,230.00

Mini speedometer for Triumph (2016-... I Liquid-cooled). This tiny Plug & Play speedometer is THE solution to clear the cockpit of your Triumph while keeping the original features of your speedometer. It comes with a fixation bracket to mount it on one of your fork tube, or under the yokes if you already have one BAAK triple trees kit mounted on. The...

Triumph

Bates headlight / integrated speedometer for Triumph (2016)

€1,350.00

Bates headlight / integrated speedometer for Triumph (2016-... I Liquid-cooled). Inserted into a ø150mm diameter Bates lighthouse casing, this tiny Plug & Play speedometer is a simple solution to clear the cockpit of your Triumph while keeping the features of your original speedo. The speedometer is available in Classic or Vintage finish, the...

Triumph

Classic headlight / integrated speedometer for Triumph (2016)

€1,500.00

Classic headlight / integrated speedometer for Triumph (2016-... I Liquid-cooled). Inserted in a ø180mm Classic lighthouse casing, this Plug & Play speedometer is a simple solution to clear the cockpit of your Triumph while keeping the original features of your speedometer and a good readability. The speedometer bottom is available in White or Black...

Parts kit for Triumph Bonneville BOBBER 1200 by BAAK

Parts kit for Triumph Bonneville BOBBER 1200 by BAAK 2

Bonneville Bobber (2017 -...)

Triumph Bobber 1200 Kit

€2,800.00

Kit Triumph Bonneville Bobber 1200. Our craftsmen design and manufacture this parts pack to improve the look of your Bobber along with the rising feelings. It offers a more radical version of this Triumph Bobber 1200 while keeping a touch of chic thanks to noble material parts. These accessories are easy to assemble and come with all the wiring harness,...

Triumph

Classic Mini front mudguard for Triumph

€108.00

Classic Mini front mudguard for Triumph, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. We drill holes on this mudguard according to the model of Triumph you choose. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black, brushed and...

Airbox removal kit for Triumph T120 (2016)

Bonneville T120 (2016 -...)

Airbox removal kit for Triumph T120 (2016)

€280.00

Airbox removal kit for Triumph Bonneville T120 (2016-...). This kit enables you to visually lighten the line of your motorcycle and make it breathe better. This kit includes: The aluminium battery box (Satin black only) A pair of "camembert" air filters A pair of aluminium side covers (Satin black or Brushed) with or without saddlebag(s) All the...

Triumph

Brembo brake pads for Triumph

€51.80

Brembo front brake pads for Triumph. Softer than the original ones, these front brake pads are manufactured out of high quality material that provides a perfect braking constancy, as much in cold or high temperature conditions. The friction coefficient is higher than on your original Triumph brake pads, which provide excellent braking performances and...

Replacement air filters for Triumph Bobber 1200 Airbox removal kit

Replacement air filters for Triumph Bobber 1200 Airbox removal kit 2

Bonneville Bobber (2017 -...)

Spare air filters for Triumph Bobber 1200 airbox removal kit

€69.00

This pack of spare air filters is suitable for our Airbox removal kit for Triumph Bobber 1200 (2017-...). It's composed of two air filters available in Brushed, polished and satin black. The air filters replacement routine on your motorcycle depends on how you use it along the year.

BAAK | Tiny speedo with bracket for BMW NineT

Parts

Tiny speedo with bracket for BMW NineT

€375.00

Available in classic or vintage dial, this gauge is ideal to streamline the cockpit of your NineT. We pre wire everything for a completely Plug & Play solution.

BAAK | Chrono speedo with bracket for BMW NineT

Parts

Chrono speedo with bracket for BMW NineT

€648.00

Available in white or black dial, this gauge is ideal to streamline the cockpit of your NineT. We pre wire everything for a completely Plug & Play solution. The electronic housing is as the speedo pre-wired. The speed is displayed in analogy and the rest of the informations are digitally displayed on the dial of the speedometer

Parts

Short fork spring blocks

€19.00

Short fork spring blocks. To proportionally lower the front en of your Triumph or Moto Guzzi V7 when you fit our short shock absorbers, you will need these fork springs blocks. It's 2cm (25/32'') shorter and comes right in place of the original ones.

Parts

Flat Track handlebars Ø22mm

€90.00

Flat Track handlebar ø22mm manufactured out of steel, it enables you to get a more comfortable driving position and a better look. This handlebar has much pullback to the rider, and his flat Track look will make your bike handle better. Available in Ø22mm diameter only, and in Chromed or Brushed finish.

Parts

Tracker bar handlebars

€159.00

Tracker Bar handlebars, manufactured out of aluminium. This Tracker type handlebar has Ø28,6mm clamping diameter and Ø22mm controls diameter. It's 790mm wide. It offers much pullback to the rider which offers a comfortable riding position. It's available in satin black finish only.

Triumph

Headlight brackets for original headlight for Triumph (2016 )

€129.00

Headlight fixation brackets for Triumph original headlight (since 2016). This pair of lighthouse brackets come to replace the original ones and reveal the fork tubes. Suitable for the Triumph T120 / T100 Street Scrambler / Street Twin / Thruxton 1200 (since 2016) original headlights. The optional turn indicators brackets enable mount on the headlight...

Bmw

Battery box for BMW NineT

€330.00

Battery box for BMW NineT. This aluminum battery box is particularly useful to remove your original air box and keep your original battery. Designed and manufactured by our team in Lyon and then powder coated in stain black. It comes with all the necessary stainless steel hardware. It's designed to get a cleaner look on your motorcycle.

Removable windshield for BMW Nine T Pure and Scrambler

Parts

Removable windshield for BMW Nine T Pure and Scrambler

€816.00

For BMW Nine T Pure or Scrambler, this retro-touring removable windscreen is the perfect accessory for everyday use or long-distance travel.Easy to remove in 2 seconds without tools, it leaves just four discreet brackets. Please note that it is not compatible with the original headlight, but only with our Bates headlight, to be ordered separately....

motoscope chronoclassic 2 speedometer for BMW NineT 2017-2023

Parts

Motoscope chronoclassic 2 speedometer for BMW NineT 2017-2023

cher

€570.00

Opt for the Chronoclassic 2 Motoscope speedometer by Motogadget for your BMW NineT (2017-2023) and transform your bike in just minutes. This fully wired 'plug and ride' kit is easy to install without any technical knowledge required! Compatible with R9T models (2014-2016) and Euro 4 (post-2017) models such as Urban G/S, Pure, and Scrambler. Installation...

Aluminium turn indicators holders for license plate

Aluminium turn indicators holders for license plate 2

Parts

Turn indicators holders on license plate

€30.00

These aluminium turn indicators holders are designed to be assembled on a BAAK license plate holder, on the motorcycle of your choice. It's available in 3 different versions : For turn indicators with øM8 shafts For turn indicators with øM10 shafts For original / accessory Triumph turn indicators (2016-...) It comes with the necessary stainless steel...

Parts

BAAK N°1 handlebars Ø25,4mm

€159.00

Wide stainless steel BAAK N°1 handlebars in Ø25,4mm (1 inch). It's flatter, wider and has more pullback / sweep to the rider than most of the other handlebars. It will offer a very distinguished look to your motorcycle, and improve its handling qualities and your riding position. It's available in Satin black and Brushed finish. The stainless steel tubes...

Leather wiring harness cover for Triumph Bobber airbox removal kit

Leather wiring harness cover for Triumph Bobber airbox removal kit 2

Bonneville Bobber (2017 -...)

Wiring cover for airbox removal kit Triumph Bobber (2017)

€165.00

Our Airbox removal kit for Triumph Bobber (2017-...) lets you remove your original airbox of your machine. Now we offer the elegant leather piece hiding the wiring harness separately, without the filters. Designed and manufactured at the workshop by our craftsmen, this wiring harness cover is available in brown, black, gold and ruby leather.

R 12 nine t

Leather seat BMW R12 NineT

€1,620.00

Classic Leather Two-Seater Seat for BMW R12 NineT This seat is handcrafted in our workshop using a BMW seat base, ensuring full compatibility with your R12 NineT. Available in Vintage Brown, Gold, Black, and Chocolate leather, it adds an elegant touch to your ride. Choose a leather cover with either classic ribbing or a diamond-stitched pattern to suit...

Fork spring blocks for Triumph Street Scrambler (2016)

Street / Speed Twin 900 (2016 -...)

Fork spring blocks for Triumph Street Scrambler (2016)

€19.00

This pair of stainless steel fork spring blocks let you rise the front of your Triumph Street Scrambler (2016-...) by 10mm, particularly if you choose longer shock absorbers for your machine. These blocks simply come on top of your original fork springs.

Parts

Replacement BAAK exhaust mufflers

€588.00

Replacement BAAK exhaust mufflers are sold by pair with mounting brackets and screws. Select the model of your motorcycle and we will make these silencers that will perfectly fit to BAAK manifolds. The muffled sound remains the same, the finish equaled.

BAAK | Trail engine protection for Triumph T100/T120.

Parts

Trail engine protection for Triumph T100/T120

€145.00

Aluminium engine protection for Triumph T100/T120 (2016-…) with an adventurer look and for the best protection.

Adapter for high front fender and Bates headlight for Street Scrambler (2019)

Parts

Adapter for high front fender and Bates headlight for Street Scrambler (2019)

€30.00

Essential for mounting BAAK bates headlights and BAAK scrambler front mudguard on Street Scramblers from 2019.

Front-turn-indicators-bracket-Triumph-Bobber-1200

Front-turn-indicators-bracket-Triumph-Bobber-1200 2

Parts

Front turn indicators bracket for Triumph Bobber 1200

€25.00

Turn signals brackets kit to relocate the indicators Triumph Bobber 1200 to visually lighten your motorcycle. The bracket comes on your oil-cooler.

Universal

License plate holder for US format

€45.00

This license plate holder is suitable for US size license plates (horizontal). It's manufactured out of 3mm thick aluminium and it's satin black powder coat painted. This part is only suitable for BAAK license plate holders.

BAAK Turn indicators brackets kit for Triumph Bobber 1200

Parts

Turn indicators brackets kit for Triumph Bobber 1200

€390.00

This kit allows you to relocate the indicators of your Bobber 1200 and thus purify its line. The rear indicators incorporate the brake lights.

Rear BAAK wiring harness for Triumph Bobber 1200

Rear BAAK wiring harness for Triumph Bobber 1200 2

Parts

Rear wiring harness for Triumph Bobber 1200

€39.00

These connectors enable you to connect any item 10W to the original wiring harness of your Bobber 1200 without having to cut or solder any wire.

Aventures leather seat for Triumph Scrambler 1200 XE/XC

Parts

Aventures leather seat for Triumph Scrambler 1200 XE/XC

€915.00

Aventures Leather Seat for Triumph Scrambler 1200 XC/XE. Replace the original seat of your Triumph 1200 XC or XE. Recommended height of the pilot: from 6,2 feet tall

Scrambler 1200 x/xc/xe

Side covers (for original high exhaust system) Triumph Scrambler 1200 X/XC/XE

€198.00

Enhance your Triumph Scrambler 1200 X/XC/XE with these aluminum side covers designed for the original high exhaust line. They not only improve heat protection but also add a dynamic look to your bike. These covers allow you to replace the original plastic parts with a more robust and aesthetically pleasing solution. Easy to install, they fit directly in...

Plate holder for original Triumph Scrambler 1200 XC/XE mudguards

Parts

Plate holder for original Triumph Scrambler 1200 XC/XE mudguards

€0.00

More discreet than the original, this accessory is very easily fitted as a replacement for the original part, delivered with a plug & play harness. In the photos, the light and indicators are Triumph options.

Heritage leather seat for Triumph Scrambler 1200 XC/XE

Parts

Heritage leather seat for Triumph Scrambler 1200 XC/XE

€765.00

Heritage Leather Seat for Triumph Scrambler 1200 XC/XE. Replace the original seat of your Triumph 1200 XC or XE.

Side covers (low exhaust line) for Triumph Scrambler 1200 XC/XE

Parts

Side covers (low exhaust line) for Triumph Scrambler 1200 XC/XE

€198.00

Side covers for Triumph Scrambler 1200 XC/XE in aluminium.Attaches to replace the original side covers of your Triumph 1200 XC or XE.

Parts

Leather keychain

€19.00

This leather keychain is handcrafted by our craftsmen in the same leather from which we manufacture our seats, saddlebags, etc... Simple and elegant, just as our motorized creations. It's available in Brown, black, gold or ruby (red) leather). The BAAK logo is hot-pressed on the keychain. You can attach your keys to it thanks to the ring, the...

Parts

Headlight struts

€22.00

Motorcycle headlight struts, manufactured out of aluminum, to perfectly adjust the position of your headlight. The hole diameter is ø8mm, the exterior diameter is ø29mm. For Moto Guzzi V7 Classic or Heritage headlight, choose the 10mm ones. For Triumph and Royal Enfield Classic or Heritage headlight, choose the 5mm ones. Comes in pairs.

Large bag holder for Triumph short seat kit (2016 - ...)

Home

Large bag holder for Triumph short seat kit (2016 - ...)

€240.00

Turn indicators holdersDesigned for our large removable rolled pannier or messenger bag, this bracket is compatible with our Triumph Short Seat Kit (2016-...). This bracket is designed to accommodate one or two large panniers if you have a BAAK short seat kit. We've obviously designed it so that the pannier doesn't get in the way of the passenger. The...

Universal

Universal handlebars controls kit

€198.00

This Universal handlebars controls kit is essential to clear your cockpit. Each part of the kit must be purchased separately : Brake master cylinder Throttle Clutch lever This kit designed by our craftsmen shows a perfect finish level thanks to his assembly quality and satin black powder coat painting. These parts are available for classic and vintage...

Triumph

Windscreen for Triumph 1200 Scrambler XE-XC

€96.00

You'll agree that on the Triumph Scrambler XE and XC, the rear part of the original speedometer lacks a refined finish... That's why we created this windscreen, available in brushed aluminum or satin black, both simple and elegant, specifically designed for this model. Our windscreen is specially designed to perfectly complement the original fenders of...

BAAK black aluminium headlight brackets for motorcycles

BAAK black aluminium headlight brackets for motorcycles 2

Parts

Universal short headlight clamps for classic motorcycles

€129.00

Headlight bracket for motorcycles, for M8 side headlight fixation, with optional front turn indicators holders. Designed and manufactured at BAAK's in France. Perfect to put a BAAK headlight on your motorcycle and improve its finish level. Ø39 - 40mm for Moto Guzzi V7I / V7 II / V7 III / V7 850 / V9 (60mm size) Ø41 - 42mm for Triumph Bonneville T100 / SE...

Radiator guard for Triumph (2016-...) T120 - T100 - Speed Twin 900

Parts

Radiator guard for Triumph (2016)

€84.00

Protect your Triumph Bonneville (2016-...) radiator with this high-quality stainless steel guard, coated in premium satin black epoxy paint. Designed to last, it offers optimal protection without compromising engine cooling. Comes with stainless steel mounting hardware. Made in France

Side plate bracket for Triumph Bobber (2017)

Parts

Side plate bracket for Triumph Bobber (2017)

€95.00

Optimize the appearance of your Triumph Bonneville Bobber with this side license plate bracket. Featuring plate illumination and plug-and-play wiring, it ensures easy installation. Not compatible with the original mudguard, this bracket is tolerated by certain motorcycle inspection centers in France. Made in France

Flat Triple Clamp for Triumph Thruxton R/RS in Aluminum - Satin Black Epoxy Finish | BAAK Motocyclettes

Flat Triple Clamp for Triumph Thruxton R/RS in Aluminum - Satin Black Epoxy Finish | BAAK Motocyclettes 2

Parts

Flat triple trees for Triumph Thruxton R and RS

€540.00

Designed for the Triumph Thruxton R and RS, this flat triple clamp lowers the front of your bike while retaining the original ignition switch and gauge mount. Crafted from CNC-machined aluminum, it features a premium satin black epoxy finish for a sleek and luxurious look. Note that this triple clamp is not compatible with the Speed Twin 1200. Made in...

Daytona Triumph counter, Café Racer prep, Made in France

Daytona Triumph counter, Café Racer prep, Made in France 2

Parts

Mini Daytona speedo for Triumph (2016)

€966.00

The Daytona mini speedometer is compatible with the original handlebar clamps. of modern Triumphs (T120, T100, Speed Twin 900, Scrambler 900) and is a 100% plug and play accessory. Pre-wired in our workshop, it's easy to fit without any modifications and is available in km/h or miles versions. Only compatible with original handlebar clamps. Made in France.

Plug and play headlight for Triumph (2016...)

Parts

Plug and play headlight for Triumph (2016...)

€27.00

Looking to customize your Triumph (2016 and up) without the hassle? This plug and play front headlight pilot light makes it super easy. With a connector fully compatible with your original wiring, you can install an adaptable headlight in no time. Perfect for café racer, scrambler, or bobber projects, it ensures a clean, simple setup. Made in France.

Parts

Round 21W turn indicators

€0.00

Round 21W Aluminum blinkers, 40mm (1&1/2") diameter, with 21W bulbs and M10 fixation shaft. Very nice finishes, much more discreet than most of the original turn indicators. Be careful to respect the polarity when connecting. Sold in pairs. UE approved for road use.

Flat Triple Clamp Triumph T100/T120 – 3 Aluminum Versions | Made in France

Flat Triple Clamp Triumph T100/T120 – 3 Aluminum Versions | Made in France 2

Parts

Flat triple trees Triumph T100/T120

€600.00

Transform your Triumph T100/T120 with this flat, mass-cut aluminum fork crown. Finished in satin black with a high-quality epoxy paint, it comes with a pair of bridges of your choice. This fork crown lowers your bike by 15mm at the front, so we recommend tuning your shocks or opting for our lowering kit. It is also compatible with Street Twin and Speed...

Removable windshield for Triumph Bonneville T100 / T120

Parts

Removable windshield for Triumph Bonneville T100 / T120

€816.00

Equip your Triumph Bonneville T100/T120 with this retro-touring removable windscreen kit. 2 sec to remove without tools.It includes a removable windshield and its mountings, as well as headlight brackets adapted to the original model. This windshield is compatible with the original headlight or any other ø180mm headlight. Not compatible with Triumph...

Classic ø10 round aluminum motorcycle mirror

Parts

Classic ø10 round aluminum motorcycle mirror

€64.00

Classic round motorcycle mirror. This black mirror, Ø10cm / diameter, has an impeccable yet discreet finish. It offers perfect rearward visibility and fits any motorcycle. Height-adjustable thanks to 150mm articulated rod. Supplied with two adapters (left-hand and right-hand M10x1.25 mm). Additional adapters are available as options. Approved to European...

Extension for Classic ø10 round motorcycle mirror in aluminium

Parts

Extension for Classic ø10 round motorcycle mirror in aluminium

€22.00

Shaft extension for Classic round mirror. This extension is suitable only for our Classic round mirror. This part enables you make the mirror shaft longer for a better rear view, and makes it easier to adjust. This extension is 55mm long (35mm between holes). Supplied per unit.

Round handlebar mirror ø10 HIGHSIDER MONTANA-SLIM EVO SHORT

Round handlebar mirror ø10 HIGHSIDER MONTANA-SLIM EVO SHORT 2

Parts

Round Bar End mirror ø10 HIGHSIDER MONTANA-SLIM EVO SHORT

€84.00

Looking for a discreet, high-performance mirror? The HIGHSIDER MONTANA-SLIM EVO SHORT is for you. With a thickness of just 5 mm, a black anodized aluminum design and convex glass for optimum visibility, this mirror combines style and safety. Easy to install on handlebars from 12 to 22 mm, it complies with E standards for left- or right-hand use.

Bullet-type LED motorcycle turn indicators in black aluminum/brushed finish

Parts

Bullet-type LED motorcycle turn indicators in black aluminum/brushed finish

€78.00

Bullet-type motorcycle LED 10W turn signals in black aluminum with brushed trim combine elegance and efficiency. Featuring clear glass, they measure 20 mm in diameter and 36.5 mm in length. Mounting is simple, thanks to an M8mm screw fastener, and they are compatible with a 12 V system. Supplied sheathed and with ø3.2mm Japanese round crimped lugs....

Classic ø10 round motorcycle mirror in aluminum, long stem

Parts

Classic ø10 round motorcycle mirror in aluminum, long stem

€66.00

The Classic HIGHSIDER MONTANA XL round motorcycle mirror combines elegance and functionality with its timeless design. Its black anodized finish, combined with an extended 25 mm stem, offers enhanced rear visibility. Designed to improve ergonomics and guarantee a minimalist look, it's perfect for vintage and custom motorcycles. Sold individually.

Rear fender removal kit Triumph 1200 Scrambler X-XE-XC

Parts

Rear fender removal kit Triumph 1200 Scrambler X-XE-XC

€210.00

Currently unavailable Do you want to streamline the rear of your Triumph 1200 Scrambler XC/XE/X? This fender eliminator with license plate holder allows you to completely remove the stock mudguard. Made of aluminum and stainless steel, the kit comes with an approved LED taillight and license plate lighting. A plug-and-play adapter harness makes...

View

Quad Lock Pro Aluminium Motorcycle Phone Holder - Handlebar mount - BAAK

Parts

Quad Lock Pro Aluminium Motorcycle Phone Holder Handlebar mount

€70.00

Give your bike the best smartphone mount with the Quad Lock Pro Aluminium. Carefully selected by the BAAK Atelier team for its sleek design, this mount represents the top-of-the-range version of the Quad Lock brand (Pro version). Manufacturer reference : QLM-HBR-PRO

Quad Lock Pro Aluminium Threaded Rod Motorcycle Phone Holder

Parts

Quad Lock Pro Aluminium Threaded Rod Motorcycle Phone Holder

€64.99

Give your bike the best smartphone mount with the Quad Lock Pro Aluminium. Carefully selected by the Atelier BAAK team for its sleek design, this bracket is the top-of-the-range version of the Quad Lock brand (Pro version). The Quad Lock threaded rod mount replaces one of the screws (M8) of your handlebar clamps on your motorbike for a perfectly...

Bouchon plat de réservoir pour triumph 2

Parts

Flat fuel tank cap for Triumph

€58.00

Available in black finish only, without a locking system. Crafted with a black anodized treatment for exceptional durability and style. This product has been carefully selected by the BAAK workshop team for its elegant design and superior quality. It installs easily as a direct replacement for the original cap.

Home

FICTECH microfiber

€5.90

Discover the FICTECH microfiber for cleaning and caring for your motorcycle. Designed to meet the needs of vehicle enthusiasts, this microfiber offers professional-grade quality for a flawless clean without scratches.

Home

Complete Cleaning Kit

€65.00

The ultimate kit for cleaning and maintaining your motorcycle. MOTO SHINE 742: Waterless Motorcycle Wax Cleaner MOTO GRIME 136: Special Chain, Sprocket, and Transmission Cleaner MOTO MATT 741: Quick Detailer for Matte Motorcycles MOTO WASH 116: Quick Cleaner/Degreaser for Motorcycles Free Microfiber Included

Moto Wash – 116 Effectively Removes Various Dirt

Home

MOTO WASH 116 Cleaner - Fictech (1 Liter)

€15.90

This cleaner and degreaser effectively removes insects, tar, mud, and various dirt without damaging surfaces. Suitable for use on both glossy and matte finishes, it is highly efficient and safe to use everywhere (fairings, paint, varnish, metals, rims, wheels, tires, frames, plastics, transmission, etc.).

MOTO SHINE 742 - Waterless Motorcycle Cleaner

Home

MOTO SHINE 742 Cleaner - Fictech (500 mL)

€15.00

Waterless Wax Cleaner specially designed for motorcycles. Cleans and shines without scratching the paint, chrome, stainless steel, carbon, and plastic parts of your motorcycle. Removes dirt, dust, and the dull film that builds up over time on shiny surfaces. Thanks to its carnauba wax formula, Shine 742 restores brilliance to surfaces and provides...

Home

MOTO MATT 741 Cleaner - Fictech (500 mL)

€15.00

Waterless Cleaner Specially Designed for Matte Motorcycle Paints Effortlessly removes dirt, dust, and cleans without scratching matte paint and plastic surfaces on your motorcycle.

Home

Motorcycle Cleaner MOTO GRIME 136 - Fictech (500 mL)

€20.70

MOTO GRIME 136 is a specialized cleaner for your motorcycle's chain, sprockets, and transmission. It penetrates, dissolves, and removes chain oil and grease effortlessly in seconds, without damaging the O-ring, X-ring, and Z-ring transmission chain seals.

Triumph

Triumph Thruxton 1200 Tank Strap

€96.00

Leather tank strap designed for Triumph Thruxton 1200 tanks. It fits under the original stainless steel strap, adding a refined look to your tank while enhancing its appearance. Made in France

Rear Fender Eliminator Kit Triumph 2016-...

Parts

Rear Fender Eliminator Kit Triumph 2016-...

€240.00

Looking to streamline the rear of your Triumph Bonneville T100/T120, ST900, or Scrambler 900? This fender eliminator kit with a license plate holder allows you to completely remove the original rear fender. Made from aluminum and stainless steel, the kit comes with a homologated LED taillight and license plate illumination. A plug-and-play adapter...

Parts

Wire Splitter

€9.60

The wire splitter provides you with an additional connection point. Compatible with all BAAK wiring harnesses.

Parts

41mm Fork Tube Clamp Universal

€45.00

This aluminum bracket attaches to your original fork tube, allowing you to mount accessories such as a speedometer, GPS, switch, etc. Compatible with all 41mm forks. M8 thread.

Triumph

Rear Brake Caliper Guard for Triumph

€36.00

Protect your rear brake caliper with this stainless steel guard, specially designed for Triumph motorcycles. Since the rear caliper of your Triumph is located below the wheel axle, it is naturally exposed to stone impacts during off-road riding and curbs in urban settings. This caliper guard has been specifically designed to cover the caliper and...

Parts

VANS 22mm Handlebar Grips

€28.80

Vans handlebar grips for motorcycles, right and left. Featuring the classic waffle sole pattern of Vans® and constructed from ODI's exclusive grip compounds. For handlebars with a 22mm diameter, also available below in ø25mm. Sold in pairs.

Parts

Breather only Ø15mm

€36.00

This breather filter allows you to remove any original airbox. You can install it at the outlet of the original rubber hose or directly on your engine crankcase.

Parts

Breather only Ø10mm

€36.00

This breather filter allows you to remove any original airbox. You can install it at the outlet of the original rubber hose or directly on your engine crankcase.

Black Injection covers for Triumph Bonneville T120

Parts

Black Injection covers for Triumph Bonneville T120

€65.00

Black Injection Covers for Triumph Bonneville T120. These injection covers are original Triumph T120 covers but have been treated with satin black epoxy paint. Sold as a pair.

Classic Moto Headlight Protection Grille - Universal

Classic Moto Headlight Protection Grille - Universal 2

Parts

Classic Headlight Protection Grid - Universal

€90.00

Stainless steel headlight grille with satin black epoxy coating. Perfectly fits our Classic headlight but can also be adapted to many OEM and aftermarket headlights (180mm diameter).

Parts

Mirror adapter

€15.00

Handlebar adapters, required to mount some mirrors on your handlebar. We offer two different solutions : Adapter for ø22mm handlebars, to mount our mirrors in underbar position (M10 threading) Through rod type adapter, to mount a mirror on a through rod type fixation in classic or underbar position

Home

Biltwell Recoil handlebars

€22.00

handles of handlebars Biltwell right and left, for motorcycle motorcycles. Allows good handlebars, perfect comfort and an incomparable look at the origin. for handlebar in diameter 1 "(Ø25.4mm) or Ø22mm. Delivered by pairs. Available only in black. without a collar for a more refined look.

Beringer Classic front brake disc for Triumph (2016 -...)

Home

Beringer Classic front brake disc for Triumph (2016 -...)

€492.00

front brake disc Beringer Classic for Triumph (2016-…). These discs will allow you to give a more aesthetic and elegant look to your front wheel while reducing the weight thanks to the aluminum hub. sold per unit - Provide 2 units for a double disc braking.

Beringer Classic front brake disc for Triumph Bobber 1200

Home

Beringer Classic front brake disc for Triumph Bobber 1200

€492.00

front brake disc Beringer Classic for Triumph Bobber 1200 (2017-…). These discs will allow you to give a more aesthetic and elegant look to your front wheel while reducing the weight thanks to the aluminum hub. sold per unit - Provide 2 units for a double disc braking.

Front brake disc Beringer Classic for Triumph (pre-2016)

Home

Front brake disc Beringer Classic for Triumph (pre-2016)

€492.00

Beringer Classic front brake disc for Triumph (2016-…). Engineered for powerful and long-lasting braking, it offers both performance and durability with its stainless steel tracks and precision-machined aluminum hubs. Sold individually – purchase 2 units for dual-disc front braking.

Home

Motogadget mo.blaze Tens Turn Signals

€49.42

SOLD INDIVIDUALLY Delivered complete with an M8 threaded bolt, an M8 nut, and a 100 cm connector cableECE-approved as front and rear indicators