Prices drop

Showing 1-24 of 56 item(s)

BAAK | Ventilation grilles for Land Rover Defender

BAAK | Ventilation grilles for Land Rover Defender 2

-20%

Land Rover Defender

Air vents for Land Rover Defender

€88.00 €110.00

Time left

The ventilation grilles for Land Rover Defender complement our range of Defender bodywork accessories. They are a superior replacement for the original plastic grilles (air intake grilles, heater grille). The range was designed by our Design department and engineering office to let you customize your Defender.They give it a unique character: raw and...

View

Bracket for regulator / turn signals / horn for Triumph (pre-2016)

Bracket for regulator / turn signals / horn for Triumph (pre-2016) 2

-20%

Triumph

Bracket for regulator / turn signals / horn for Triumph (pre-2016)

€39.20 €49.00

Time left

Bracket allowing you to mount your regulator, front turn signals and horn on a single bracket, for Triumph (pre-2016 - air-cooled). This accessory visually lightens the lines of your motorcycle by relocating these parts beneath the steering head. This bracket measures 21.8 cm wide and 12 cm high. It mounts to the original horn anchor point. This...

Universal Classic Medium front mudguard

Universal Classic Medium front mudguard 2

-20%

Parts

Classic Medium Universal front fender

€91.20 €114.00

Time left

Classic Medium front fender — universal, made from stainless steel. The moulded ends give it a very elegant classic look. It is not pre-drilled so you can fit it to any motorcycle. This Classic front fender is available in satin black, polished, glossy black, brushed and paint-ready (satin black epoxy). Designed and produced by our craftsmen at the...

View

Classic Mini front mudguard for Triumph

Classic Mini front mudguard for Triumph 2

-20%

Triumph

Classic Mini front fender for Triumph

€86.40 €108.00

Time left

Front Classic Mini Fender for Triumph, made from stainless steel. The mouldings at its ends give it a very elegant classic look. It is pre-drilled to fit the Triumph model of your choice. You can reuse the original fasteners. This Front Classic fender is available in several finishes. Designed and manufactured by our craftsmen at the workshop in France....

View

Front fender Classic Mini for Triumph Bobber

Front fender Classic Mini for Triumph Bobber 2

-20%

Bonneville Bobber (2017 -...)

Classic Mini front fender for Triumph Bobber

€168.00 €210.00

Time left

Classic Mini front fender for Triumph Bonneville Bobber (2017-...), made from stainless steel. The rolled edges at its ends give it a very elegant classic look. It is pre-drilled and supplied with its mounting brackets to fit your Triumph Bobber perfectly. This front fender is not compatible with Bobber Black, Bobber TFC and Bobber EURO V models....

Classic Mini Front Fender Royal Enfield 650 Interceptor / Continental GT

Classic Mini Front Fender Royal Enfield 650 Interceptor / Continental GT 2

-20%

Interceptor / Continental GT 650

Classic Mini Front Fender Royal Enfield 650 Interceptor / Continental GT

€86.40 €108.00

Time left

Classic Mini front fender for Royal Enfield 650 Interceptor / Continental GT (2018-...), made from stainless steel. Rolled edges at its ends give it a very elegant classic look. It is pre-drilled to fit your motorcycle. Available without or with a lift kit (+10mm) if you wish to fit a front tire with a taller profile than the original. This Classic front...

View

Universal Classic Mini front mudguard

Universal Classic Mini front mudguard 2

-20%

Parts

Classic Mini Universal Front Fender

€81.60 €102.00

Time left

Classic Mini front fender universal, made from stainless steel. The molded edges at its ends give it a very elegant classic look. It is not pre-drilled, so you can fit it to the motorcycle of your choice. This Classic front fender is available in satin black, polished, glossy black, brushed and ready-to-paint (satin black epoxy) finishes. Designed and...

View

Classic rear fender for Moto Guzzi V7 I / II and III

Classic rear fender for Moto Guzzi V7 I / II and III 2

-20%

Moto Guzzi

Classic rear fender for Moto Guzzi V7 I / II and III

€240.00 €300.00

Time left

Classic rear fender for Moto Guzzi V7 I, V7 II and V7 III. Made of stainless steel, its molded end gives it a raw yet elegant classic look. It provides good protection against spray from the rear wheel. Equipped with an LED taillight (CE approved), license plate illumination, a choice of plate bracket (side or rear), choice of rear turn signal mounts, a...

View

Rear fender Classic for Royal Enfield 650 Interceptor / Continental GT

Rear fender Classic for Royal Enfield 650 Interceptor / Continental GT 2

-20%

Interceptor / Continental GT 650

Classic rear fender for Royal Enfield 650 Interceptor / Continental GT

€240.00 €300.00

Time left

Classic rear fender for Royal Enfield 650 Interceptor / Continental GT, made from stainless steel in our workshop in France. Its molded end gives it a more elegant look. It provides good protection against rear wheel spray while remaining more discreet than the original. Supplied with an LED taillight (CE approved) with integrated license plate...

View

Classic side covers for Speed Twin 1200 / Thruxton 1200

Classic side covers for Speed Twin 1200 / Thruxton 1200 2

-20%

Home

Classic side covers for Speed Twin 1200 / Thruxton 1200

€60.00 €75.00

Time left

Classic side covers for Triumph (from 2016), designed and manufactured in aluminum at our workshop in France. These covers replace the original side panels of your machine to give it a more assertive look. Available for the right or left side. Supplied with the necessary mounting hardware. Available in Brushed or Satin Black finish. These side covers...

View

Aluminium side covers for Triumph (2016-...)

Aluminium side covers for Triumph (2016-...) 2

-20%

Triumph

Classic side covers for Triumph (after 2016)

€60.00 €75.00

Time left

Classic side covers for Triumph (from 2016), designed and manufactured in aluminum at the workshop in France. These covers replace the original side covers of your machine to give it a more assertive look. Available for the right or left side. Supplied with the necessary mounting screws. Available in Brushed or Satin Black finish. Dimensions: 265 x...

View

Aluminium side covers for Triumph (pre- 2016)

Aluminium side covers for Triumph (pre- 2016) 2

-20%

Triumph

Classic side covers for Triumph (pre-2016)

€60.00 €75.00

Time left

Classic side covers for Triumph (pre-2016 - air-cooled), made from aluminium and available in Brushed or Satin Black finish. These covers replace your original plastic side covers. They give your machine a bolder look while concealing the air box. Supplied with the necessary mounting hardware. Available for right or left side.Made in France

View

Contact switch relocation kit for Triumph (before 2016)

Contact switch relocation kit for Triumph (before 2016) 2

-20%

Triumph

Contact switch relocation kit for Triumph (before 2016)

€39.20 €49.00

Time left

Switch bracket for Triumph (pre-2016). This bracket allows the ignition switch to be moved between the fuel tank and the left carburetor. It mounts on the right on fuel-injected (EFI) models. Its installation requires relocating under the tank the wiring harness that is normally in the headlight, without having to lengthen any electrical cables....

Reinforced aluminum engine guard for Royal Enfield 650 Interceptor / Continental GT

Reinforced aluminum engine guard for Royal Enfield 650 Interceptor / Continental GT 2

-20%

Interceptor / Continental GT 650

Engine guard Trail for Royal Enfield 650 Interceptor / Continental GT

€100.00 €125.00

Time left

Aluminum engine guard Trail for Royal Enfield 650 Interceptor / Continental GT (2018-...). In addition to giving your machine an adventurer look, it provides real protection for your lower engine in all situations. Its 4mm thick aluminum is a true barrier against terrain irregularities that could strike your lower engine. Very simple to fit, this engine...

View

Engine guard BAAK for Triumph T100/ T120

Engine guard BAAK for Triumph T100/ T120 2

-20%

Parts

Engine guard TRAIL for Triumph T100/ T120

€116.00 €145.00

Time left

Aluminum engine guard Trail for Triumph T100/T120 (2016-…) with an adventurer look for the best protection.

Wide Flat Track handlebar kit for Royal Enfield 650 Interceptor

Wide Flat Track handlebar kit for Royal Enfield 650 Interceptor 2

-15%

Interceptor / Continental GT 650

Flat Track handlebar kit for Royal Enfield 650 Interceptor

€254.15 €299.00

Time left

Flat Track handlebar kit for Royal Enfield 650 Interceptor / Continental GT 650 (2018-...). This kit includes :- a wide Flat Track steel handlebar (brushed or polished) - a lengthened brake hose- a pair of long throttle cables - a long clutch cable - a pair of clamps for ø22mm handlebars With a wider handlebar that offers more pullback toward the...

View

Fork lowering shims for Triumph and Moto Guzzi

Fork lowering shims for Triumph and Moto Guzzi 2

-15%

Parts

Fork lowering shims for Triumph and Moto Guzzi

€16.15 €19.00

Time left

Short fork spring shims. To fit our short shocks and lower the front of your Triumph or Moto Guzzi proportionally, you will need these short fork spring shims. These shims are 2 cm shorter and replace the original shims.

View

Fork spring preload spacers for Triumph Street Scrambler (after 2016)

Fork spring preload spacers for Triumph Street Scrambler (after 2016) 2

-15%

Street / Speed Twin 900 (2016 -...)

Fork spring preload spacers for Triumph Street Scrambler (after 2016)

€16.15 €19.00

Time left

This pair of stainless steel fork spring shims raises the front of your Triumph Street Scrambler (2016-...) by 10 mm, notably to keep the bike's rake similar to the original when fitting longer shocks. These shims are fitted simply in addition to the original fork springs.

Front and rear Classic fender pack for Triumph (pre-2016)

Front and rear Classic fender pack for Triumph (pre-2016) 2

-20%

Triumph

Front and rear Classic fender pack for Triumph (pre-2016)

€336.00 €420.00

Time left

Front and rear fender pack for Triumph before 2016 - Bonneville - Thruxton - Scrambler. Designed to give your Triumph a retro, premium look while improving usability, this Classic fender pack delivers a more balanced silhouette, a timeless style and careful finishing down to the last detail.Made from stainless steel, the front and rear fenders combine...

View

Front fender Classic Medium for Triumph Bobber

Front fender Classic Medium for Triumph Bobber 2

-20%

Bonneville Bobber (2017 -...)

Front Classic Medium fender for Triumph Bobber

€168.00 €210.00

Time left

Classic Medium front fender for Triumph Bonneville Bobber (2017-...), made of stainless steel. The beaded edges at its ends give it a very elegant classic look. It is pre-drilled and supplied with its specific mounting brackets to fit your Triumph Bobber. This front fender is not compatible with Bobber Black, Bobber TFC and Bobber EURO V models....

View

Classic Medium front mudguard for Triumph

Classic Medium front mudguard for Triumph 2

-20%

Triumph

Front fender Classic Medium for Triumph

€96.00 €120.00

Time left

Classic Medium Front Fender for Triumph, made from stainless steel. The end mouldings give it a very elegant classic look. It is pre-drilled to fit the Triumph model of your choice. This Classic front fender is available in several finishes. Designed and manufactured by our craftsmen at the workshop in France. Dimensions: 400x140mm.Made in France

View

High front fender Scrambler for Moto Guzzi V7I and V7II

High front fender Scrambler for Moto Guzzi V7I and V7II 2

-20%

V7 I & V7 II (2007-2017)

Front fender Scrambler for Moto Guzzi V7I / V7II

€228.00 €285.00

Time left

High front fender Scrambler for Moto Guzzi V7I and V7II. Handcrafted in stainless steel, this high front fender mounts to your V7’s original lower triple clamp using the supplied satin black mounting plate. It provides solid protection and a bold off-road look for your machine. Available in Satin Black, Gloss Black, Brushed, Polished. Dimensions:...

View

High front fender Scrambler for Triumph (2016-...)

High front fender Scrambler for Triumph (2016-...) 2

-20%

Triumph

Front fender Scrambler for Triumph (after 2016)

€228.00 €285.00

Time left

High front fender Scrambler for Triumph (2016-... liquid-cooled). Handmade, this stainless steel high front fender mounts to your Triumph's original lower triple clamp using the supplied mounting plate. It provides good protection and a pronounced off-road look to your machine. Available in finishes Glossy black varnish, Satin black, Brushed, Polished,...

View

High fender for Royal Enfield 650 Interceptor / Continental GT

High fender for Royal Enfield 650 Interceptor / Continental GT 2

-20%

Interceptor / Continental GT 650

Front fender Scrambler Royal Enfield 650 Interceptor / Continental GT

€228.00 €285.00

Time left

High front fender for Royal Enfield 650 Interceptor / Continental GT (2018-...). This stainless steel front fender mounts in a high position on your bike's lower triple clamp using our specific mounting plate. It provides solid protection and ensures a finished off-road look. Available in 5 different finishes (Brushed, Gloss Black, Satin Black, Polished,...

View

1
2
3

Home