Prices drop

Showing 1-24 of 39 item(s)

BAAK | Ventilation grilles for Land Rover Defender

BAAK | Ventilation grilles for Land Rover Defender 2

-20%

Land Rover Defender

Air vents for Land Rover Defender

€88.00 €110.00

Time left

The ventilation grilles for Land Rover Defender complement our range of Defender bodywork accessories. They are a superior replacement for the original plastic grilles (air intake grilles, heater grille). The range was designed by our Design department and engineering office to let you customize your Defender.They give it a unique character: raw and...

View

BAAK N°1 handlebars Ø25,4mm

BAAK N°1 handlebars Ø25,4mm 2

-15%

Parts

BAAK Handlebar No.1 Ø25.4mm

€135.15 €159.00

Time left

BAAK No.1 stainless wide handlebar with constant diameter Ø25.4mm (1 inch). This handlebar provides a very comfortable riding position. With a good pullback toward the rider, it gives your machine an unmatched look and improves its handling. It is flatter than FlatTrack-style handlebars. Available in Satin Black or Brushed finish. The stainless tubes,...

View

Bates headlight plate for BMW R NineT

Bates headlight plate for BMW R NineT 2

-20%

BMW

Bates headlight plate for BMW R NineT

€135.20 €169.00

Time left

Bates headlight plate for BMW R NineT. This aluminium plate hides the steering column and cables after fitting a Bates headlight on your BMW R 1200 NineT. Made from aluminium, it is available in Satin Black or Brushed Aluminium finishes. Compatible with Bates headlight and original headlight. Leather mounting straps with metal buckle are available in 4...

View

Bracket for regulator / turn signals / horn for Triumph (pre-2016)

Bracket for regulator / turn signals / horn for Triumph (pre-2016) 2

-20%

Triumph

Bracket for regulator / turn signals / horn for Triumph (pre-2016)

€39.20 €49.00

Time left

Bracket allowing you to mount your regulator, front turn signals and horn on a single bracket, for Triumph (pre-2016 - air-cooled). This accessory visually lightens the lines of your motorcycle by relocating these parts beneath the steering head. This bracket measures 21.8 cm wide and 12 cm high. It mounts to the original horn anchor point. This...

Headlight Protection Grill Classic Moto - Universal

Headlight Protection Grill Classic Moto - Universal 2

-20%

Universal

Classic Headlight Protection Grill - Universal

€72.00 €90.00

Time left

Handmade stainless steel headlight grille – the perfect blend of protection and classic style for your motorcycle Crafted with care in our workshop in France, this 3mm stainless steel headlight grille, finished in satin black epoxy paint, provides durable, optimal protection for your headlight while asserting a timeless style. Designed to respect classic...

Classic Mini front fender for Moto Guzzi V7

Classic Mini front fender for Moto Guzzi V7 2

-20%

Moto Guzzi

Classic Mini front fender for Moto Guzzi V7

€86.40 €108.00

Time left

Classic Mini front fender for Moto Guzzi V7 I, V7 II, V7 III and V7 850, made from stainless steel. Molded edges at its ends give it a very elegant classic look. It is pre-drilled to fit the mounting system of your original fender. This Classic front fender is available in satin black, polished, glossy black, brushed and ready-to-paint (satin black...

View

Classic rear fender for Moto Guzzi V7 I / II and III

Classic rear fender for Moto Guzzi V7 I / II and III 2

-20%

Moto Guzzi

Classic rear fender for Moto Guzzi V7 I / II and III

€240.00 €300.00

Time left

Classic rear fender for Moto Guzzi V7 I, V7 II and V7 III. Made of stainless steel, its molded end gives it a raw yet elegant classic look. It provides good protection against spray from the rear wheel. Equipped with an LED taillight (CE approved), license plate illumination, a choice of plate bracket (side or rear), choice of rear turn signal mounts, a...

View

Contact switch relocation kit for Triumph (before 2016)

Contact switch relocation kit for Triumph (before 2016) 2

-20%

Triumph

Contact switch relocation kit for Triumph (before 2016)

€39.20 €49.00

Time left

Switch bracket for Triumph (pre-2016). This bracket allows the ignition switch to be moved between the fuel tank and the left carburetor. It mounts on the right on fuel-injected (EFI) models. Its installation requires relocating under the tank the wiring harness that is normally in the headlight, without having to lengthen any electrical cables....

Wide Flat Track handlebar kit for Royal Enfield 650 Interceptor

Wide Flat Track handlebar kit for Royal Enfield 650 Interceptor 2

-15%

Interceptor / Continental GT 650

Flat Track handlebar kit for Royal Enfield 650 Interceptor

€254.15 €299.00

Time left

Flat Track handlebar kit for Royal Enfield 650 Interceptor / Continental GT 650 (2018-...). This kit includes :- a wide Flat Track steel handlebar (brushed or polished) - a lengthened brake hose- a pair of long throttle cables - a long clutch cable - a pair of clamps for ø22mm handlebars With a wider handlebar that offers more pullback toward the...

View

Classic Medium front mudguard for BMW NineT

Classic Medium front mudguard for BMW NineT 2

-20%

BMW

Front fender Classic Medium for BMW R NineT

€228.00 €285.00

Time left

Classic Medium front fender for BMW R 1200 NineT, made of stainless steel. Mouldings at its ends give it a very elegant classic look. It is pre-drilled, supplied with its stainless steel mounting plate adapted to the selected model and the necessary stainless hardware. This Classic front fender is available in satin black, polished, glossy black, brushed...

View

Front fender Classic Medium for Moto Guzzi V7

Front fender Classic Medium for Moto Guzzi V7 2

-20%

Moto Guzzi

Front fender Classic Medium for Moto Guzzi V7

€96.00 €120.00

Time left

Classic Medium front fender for Moto Guzzi V7 I, V7 II, V7 III and V7 850, made from stainless steel. Molding at its ends gives it a very elegant classic look. It is pre-drilled to fit the mounting system of your original fender. This Classic front fender is available in satin black, polished, glossy black, brushed and ready-to-paint (satin black...

View

Scrambler front mudguard for BMW NineT

Scrambler front mudguard for BMW NineT 2

-20%

BMW

Front fender HIGH for BMW R NineT

€228.00 €285.00

Time left

High front fender Scrambler for BMW R NineT 1200. Handcrafted in stainless steel, this high front fender mounts to the stock lower triple clamp of your BMW R NineT using the supplied mounting plate. It provides solid protection and a pronounced off-road look for your machine. Available in Satin Black, Brushed, Polished finishes.Made in France

View

Classic vintage Land Rover grille

Classic vintage Land Rover grille 2

-20%

Land Rover Defender

Front grille for Land Rover Defender

€199.20 €249.00

Time left

The grille for the Land Rover Defender is the signature piece of our Defender bodywork accessories range. This range was conceived by our Design department and engineering office to allow you to customize your Defender. It gives it a unique character: raw and classic at once. The smooth finish and elongated lines of this piece are the result of a clean...

View

Classic Mini front mudguard for BMW NineT

Classic Mini front mudguard for BMW NineT 2

-20%

BMW

Front Mini Classic Fender for BMW NineT

€228.00 €285.00

Time left

Classic Mini front fender for BMW R 1200 NineT, made from stainless steel. The moulded ends give it a very elegant classic look. It is pre-drilled, supplied with its stainless steel mounting plate matched to the selected model and the necessary stainless fasteners. This Classic front fender is available in satin black, polished, glossy black, brushed and...

View

Headlight brackets for original headlights V7 III / V7 850 / V9

Headlight brackets for original headlights V7 III / V7 850 / V9 2

-20%

Parts

Headlight brackets for original Moto Guzzi V7 III / V7 850 / V9 headlight

€103.20 €129.00

Time left

Enhance the look of your Moto Guzzi V7 III, V7 850 or V9 with these machined aluminum headlight brackets, compatible with original LED and bulb headlights.60 mm long with 39–40 mm mounting clamps, they also allow installation of aftermarket turn signals. Satin black epoxy finish, delivered in pairs with stainless steel fasteners for a simple and robust...

View

Headlight brackets for original Royal Enfield 650 Interceptor / Continental GT

Headlight brackets for original Royal Enfield 650 Interceptor / Continental GT 2

-20%

Interceptor / Continental GT 650

Headlight brackets for original Royal Enfield 650 Interceptor / Continental GT

€103.20 €129.00

Time left

Mounting brackets for the original headlight of Royal Enfield 650 and Continental GT 650. This pair of headlight brackets fits as a direct replacement for the original ones. Compatible with bulb or LED headlights. Suitable if you keep the original keyed ignition switch. If you choose our flat fork yoke with relocated keyed ignition switch, you can fit...

View

Headlight brackets for original Triumph headlight (after 2016)

Headlight brackets for original Triumph headlight (after 2016) 2

-20%

Triumph

Headlight brackets for original Triumph headlight (after 2016)

€103.20 €129.00

Time left

Mounting brackets for original Triumph headlight (since 2016). This pair of headlight brackets replaces the originals to reveal the fork tubes. Compatible with the original headlight of T100 / T120 / Street Scrambler / Street Twin / Thruxton 1200 (since 2016). Available with turn signal brackets for Universal turn signals or original Triumph turn signals...

View

Bates headlight plate with leather clamps for Royal Enfield 650 Interceptor / Continental GT

Bates headlight plate with leather clamps for Royal Enfield 650 Interceptor / Continental GT 2

-20%

Interceptor / Continental GT 650

Headlight mounting plate Bates Royal Enfield 650 Interceptor / Continental GT

€132.00 €165.00

Time left

Bates headlight plate for Royal Enfield 650 Interceptor / Continental GT (2018-...). Note, this headlight plate is only compatible with our flat fork yoke from our Fork yoke kit. It requires moving the ignition switch under the tank. Made from aluminium, this plate hides the steering column and the cables left visible after fitting a Bates headlight to...

View

Headlight plate for Bates headlight Triumph (2016-...)

Headlight plate for Bates headlight Triumph (2016-...) 2

-20%

Triumph

Headlight plate for Bates Triumph (after 2016)

€135.20 €169.00

Time left

Bates headlight plate for Triumph (from 2016 - liquid cooled). This aluminum plate neatly conceals the steering stem and cables after fitting a Bates front headlight to your machine. Its 4 leather fastening straps in black, brown, chocolate or gold hold it to your fork tubes. Available in satin black and brushed aluminum finishes, for OEM triple clamps or...

View

Headlight plate for Bates Triumph (before 2016)

Headlight plate for Bates Triumph (before 2016) 2

-20%

Triumph

Headlight plate for Bates Triumph (before 2016)

€135.20 €169.00

Time left

Aluminium Bates-style headlight plate for Triumph (pre-2016 - air-cooled). Essential for a harmonious aesthetic behind a Bates headlight, it hides the steering column as well as all the cables. Supplied with 4 leather mounting straps in black / brown / gold or chocolate. Available in satin black and brushed aluminium finishes. Dimensions 220 x 190mm

View

Headlight protection grill Heritage - Universal

Headlight protection grill Heritage - Universal 2

-20%

Parts

Headlight protection grille Héritage - Universal

€72.00 €90.00

Time left

This 3mm thick headlight grille in stainless steel is finished with a satin black epoxy paint, providing excellent protection for your headlight. It fits perfectly with our Phare Heritage but can also fit many OEM and aftermarket headlights (180mm diameter) thanks to the supplied spacers. Contains: - One headlight grille - Two 10mm thick spacers - Two...

Land Rover Defender Headlight Surround

Land Rover Defender Headlight Surround 2

-20%

Land Rover Defender

Headlight surrounds for Land Rover Defender

€112.00 €140.00

Time left

The headlight surrounds for the Land Rover Defender complete our range of Defender body accessories, and in particular the BAAK grille.They give it a unique character: raw and classic at the same time. The smooth finish and stretched lines of these pieces are the result of a clean design, in keeping with the Defender’s timeless look. They are made with...

View

Key switch bracket for Royal Enfield 650 Interceptor / Continental GT

Key switch bracket for Royal Enfield 650 Interceptor / Continental GT 2

-20%

Interceptor / Continental GT 650

Ignition switch relocator for Royal Enfield 650 Interceptor / Continental GT

€31.20 €39.00

Time left

Key switch bracket for Royal Enfield 650 Interceptor / Continental GT (2018-...). This kit allows you to relocate your key switch from its original position under the injection unit of your Royal Enfield. It includes the stainless steel mounting plate and the wiring harness extension. Relocating your key switch will disable your motorcycle's steering...

Ignition switch relocator for Triumph (after 2016)

Ignition switch relocator for Triumph (after 2016) 2

-20%

Triumph

Ignition switch relocator for Triumph (after 2016)

€24.00 €30.00

Time left

Key switch mounting plate for Triumph (2016-... - liquid-cooled). This bracket allows you to relocate your key switch under the tank. Made from laser-cut stainless steel. You will need to relocate your key switch wiring harness. Supplied with all required stainless steel fasteners. Relocating your key switch results in loss of your motorcycle's steering...

1
2

Home