Prices drop

Showing 1-24 of 41 item(s)

BAAK | Ventilation grilles for Land Rover Defender

BAAK | Ventilation grilles for Land Rover Defender 2

-20%

Land Rover Defender

Air vents for Land Rover Defender

€88.00 €110.00

Time left

The ventilation grilles for Land Rover Defender complement our range of Defender bodywork accessories. They are a superior replacement for the original plastic grilles (air intake grilles, heater grille). The range was designed by our Design department and engineering office to let you customize your Defender.They give it a unique character: raw and...

View

Airbox removal kit for Triumph T120 (after 2016)

Airbox removal kit for Triumph T120 (after 2016) 2

-20%

Bonneville T120 (2016 -...)

Airbox removal kit for Triumph T120 (after 2016)

€224.00 €280.00

Time left

Airbox deletion kit for Triumph Bonneville T120 (2016-...). This kit cleans up the lines of your machine and frees the engine constrained by the very heavy original airbox. This kit includes: The battery tray in aluminium (Satin Black only) The pair of "camembert" air filters The pair of aluminium side covers (Black or Brushed) with or without leather...

View

BAAK N°1 handlebars Ø25,4mm

BAAK N°1 handlebars Ø25,4mm 2

-15%

Parts

BAAK Handlebar No.1 Ø25.4mm

€135.15 €159.00

Time left

BAAK No.1 stainless wide handlebar with constant diameter Ø25.4mm (1 inch). This handlebar provides a very comfortable riding position. With a good pullback toward the rider, it gives your machine an unmatched look and improves its handling. It is flatter than FlatTrack-style handlebars. Available in Satin Black or Brushed finish. The stainless tubes,...

View

BAAK Helmet T-shirt "Olive"

BAAK Helmet T-shirt "Olive" 2

-80%

Biker equipment

BAAK Helmet T-shirt "Olive"

€7.80 €39.00

BAAK Helmet T-shirt "Olive". The importance of this t-shirt lies in the detail: the helmet is embroidered in cross-stitch, reflecting BAAK's artisanal work. It is available in 2 colors. The t-shirt is olive green, the helmet is embroidered on the chest in blue tones. It is unisex — both "He" and "She" will wear it proudly.

View

BAAK Helmet T‑shirt "Grey"

BAAK Helmet T‑shirt "Grey" 2

-80%

Biker equipment

BAAK Helmet T‑shirt "Grey"

€7.80 €39.00

BAAK Helmet T-shirt "Grey". The importance of this t-shirt is in the detail: the helmet is embroidered in cross-stitch, reflecting BAAK's handcrafted work. It is available in 2 colors. The t-shirt is heather grey, the helmet is embroidered on the chest in orange tones. It is unisex; both "He" and "She" will wear it proudly.

View

BAAK Heritage T-shirt

BAAK Heritage T-shirt 2

On sale!
-40%

Clothes

BAAK Heritage T-shirt

€20.40 €34.00

Time left

Made from soft, comfortable cotton, this black Heritage T-shirt features a subtly oversized fit—just enough to combine style and ease. Its BAAK embroidery at the center adds a unique, refined touch, making this piece an authentic and timeless essential.

View

BAAK T-shirt Pocket "BMW"

BAAK T-shirt Pocket "BMW" 2

-80%

Home

BAAK T-shirt Pocket "BMW"

€5.80 €29.00

T-shirt "BAAK Pocket" BMW. This T-shirt is made from organic cotton. It has a chest pocket with an embroidered motif, and our BMW R NineT Bobber screen-printed on the back. It features a slim cut and white-coloured fabric. It is unisex; both men and women can wear it proudly. Size S is more suitable for a 12–14 year old child.

View

Contact switch relocation kit for Triumph (before 2016)

Contact switch relocation kit for Triumph (before 2016) 2

-20%

Triumph

Contact switch relocation kit for Triumph (before 2016)

€39.20 €49.00

Time left

Switch bracket for Triumph (pre-2016). This bracket allows the ignition switch to be moved between the fuel tank and the left carburetor. It mounts on the right on fuel-injected (EFI) models. Its installation requires relocating under the tank the wiring harness that is normally in the headlight, without having to lengthen any electrical cables....

Brushed stainless steel engine guard V7 III - V7 850 - V9

Brushed stainless steel engine guard V7 III - V7 850 - V9 2

-20%

Parts

Engine guard for Moto Guzzi V7 850 / V9

€79.20 €99.00

Time left

Protect the engine of your Moto Guzzi V7 850 or V9 with this stainless steel engine guard. Available in two finishes: brushed or high-quality satin black epoxy paint. Durable, attractive, and easy to fit with the included hardware, it delivers a badass look while remaining practical. An accessory as useful as it is essential for riding with peace of...

View

Exhaust silencer for Royal Enfield 650 Interceptor / Continental GT

Exhaust silencer for Royal Enfield 650 Interceptor / Continental GT 2

-10%

Interceptor / Continental GT 650

Exhaust silencer for Royal Enfield 650 Interceptor / Continental GT

€594.00 €660.00

Time left

Exhaust silencers for Royal Enfield 650 Interceptor / Continental GT (2018-...). Made from aluminium, this pair of silencers will give your machine a deeper, richer tone without making it loud. They consist of a set of baffles and packing wool that do not restrict engine performance. At the inlet of each silencer, two high‑temperature O‑rings ensure a...

View

Exhaust silencer for Triumph (before 2016)

Exhaust silencer for Triumph (before 2016) 2

-10%

Bonneville (2000-2016)

Exhaust silencer for Triumph (before 2016)

€928.80 €1,032.00

Time left

Pair of stainless steel exhaust silencers for Triumph Bonneville (pre-2016 - air-cooled). These silencers are handcrafted in France. Available in chrome or brushed finish, they deliver a deep, low tone without resonance. Lighter than the originals, they provide gains in power and torque for your machine. Not compliant with European regulations. Their...

View

Wide Flat Track handlebar kit for Royal Enfield 650 Interceptor

Wide Flat Track handlebar kit for Royal Enfield 650 Interceptor 2

-15%

Interceptor / Continental GT 650

Flat Track handlebar kit for Royal Enfield 650 Interceptor

€254.15 €299.00

Time left

Flat Track handlebar kit for Royal Enfield 650 Interceptor / Continental GT 650 (2018-...). This kit includes :- a wide Flat Track steel handlebar (brushed or polished) - a lengthened brake hose- a pair of long throttle cables - a long clutch cable - a pair of clamps for ø22mm handlebars With a wider handlebar that offers more pullback toward the...

View

Classic Medium front mudguard for BMW NineT

Classic Medium front mudguard for BMW NineT 2

-20%

BMW

Front fender Classic Medium for BMW R NineT

€228.00 €285.00

Time left

Classic Medium front fender for BMW R 1200 NineT, made of stainless steel. Mouldings at its ends give it a very elegant classic look. It is pre-drilled, supplied with its stainless steel mounting plate adapted to the selected model and the necessary stainless hardware. This Classic front fender is available in satin black, polished, glossy black, brushed...

View

Scrambler front mudguard for BMW NineT

Scrambler front mudguard for BMW NineT 2

-20%

BMW

Front fender HIGH for BMW R NineT

€228.00 €285.00

Time left

High front fender Scrambler for BMW R NineT 1200. Handcrafted in stainless steel, this high front fender mounts to the stock lower triple clamp of your BMW R NineT using the supplied mounting plate. It provides solid protection and a pronounced off-road look for your machine. Available in Satin Black, Brushed, Polished finishes.Made in France

View

Classic vintage Land Rover grille

Classic vintage Land Rover grille 2

-20%

Land Rover Defender

Front grille for Land Rover Defender

€199.20 €249.00

Time left

The grille for the Land Rover Defender is the signature piece of our Defender bodywork accessories range. This range was conceived by our Design department and engineering office to allow you to customize your Defender. It gives it a unique character: raw and classic at once. The smooth finish and elongated lines of this piece are the result of a clean...

View

Classic Mini front mudguard for BMW NineT

Classic Mini front mudguard for BMW NineT 2

-20%

BMW

Front Mini Classic Fender for BMW NineT

€228.00 €285.00

Time left

Classic Mini front fender for BMW R 1200 NineT, made from stainless steel. The moulded ends give it a very elegant classic look. It is pre-drilled, supplied with its stainless steel mounting plate matched to the selected model and the necessary stainless fasteners. This Classic front fender is available in satin black, polished, glossy black, brushed and...

View

Headlight brackets for original Royal Enfield 650 Interceptor / Continental GT

Headlight brackets for original Royal Enfield 650 Interceptor / Continental GT 2

-20%

Interceptor / Continental GT 650

Headlight brackets for original Royal Enfield 650 Interceptor / Continental GT

€103.20 €129.00

Time left

Mounting brackets for the original headlight of Royal Enfield 650 and Continental GT 650. This pair of headlight brackets fits as a direct replacement for the original ones. Compatible with bulb or LED headlights. Suitable if you keep the original keyed ignition switch. If you choose our flat fork yoke with relocated keyed ignition switch, you can fit...

View

Bates headlight plate with leather clamps for Royal Enfield 650 Interceptor / Continental GT

Bates headlight plate with leather clamps for Royal Enfield 650 Interceptor / Continental GT 2

-20%

Interceptor / Continental GT 650

Headlight mounting plate Bates Royal Enfield 650 Interceptor / Continental GT

€132.00 €165.00

Time left

Bates headlight plate for Royal Enfield 650 Interceptor / Continental GT (2018-...). Note, this headlight plate is only compatible with our flat fork yoke from our Fork yoke kit. It requires moving the ignition switch under the tank. Made from aluminium, this plate hides the steering column and the cables left visible after fitting a Bates headlight to...

View

Headlight plate for Bates headlight Triumph (2016-...)

Headlight plate for Bates headlight Triumph (2016-...) 2

-20%

Triumph

Headlight plate for Bates Triumph (after 2016)

€135.20 €169.00

Time left

Bates headlight plate for Triumph (from 2016 - liquid cooled). This aluminum plate neatly conceals the steering stem and cables after fitting a Bates front headlight to your machine. Its 4 leather fastening straps in black, brown, chocolate or gold hold it to your fork tubes. Available in satin black and brushed aluminum finishes, for OEM triple clamps or...

View

Land Rover Defender Headlight Surround

Land Rover Defender Headlight Surround 2

-20%

Land Rover Defender

Headlight surrounds for Land Rover Defender

€112.00 €140.00

Time left

The headlight surrounds for the Land Rover Defender complete our range of Defender body accessories, and in particular the BAAK grille.They give it a unique character: raw and classic at the same time. The smooth finish and stretched lines of these pieces are the result of a clean design, in keeping with the Defender’s timeless look. They are made with...

View

Key switch bracket for Royal Enfield 650 Interceptor / Continental GT

Key switch bracket for Royal Enfield 650 Interceptor / Continental GT 2

-20%

Interceptor / Continental GT 650

Ignition switch relocator for Royal Enfield 650 Interceptor / Continental GT

€31.20 €39.00

Time left

Key switch bracket for Royal Enfield 650 Interceptor / Continental GT (2018-...). This kit allows you to relocate your key switch from its original position under the injection unit of your Royal Enfield. It includes the stainless steel mounting plate and the wiring harness extension. Relocating your key switch will disable your motorcycle's steering...

Ignition switch relocator for Triumph (after 2016)

Ignition switch relocator for Triumph (after 2016) 2

-20%

Triumph

Ignition switch relocator for Triumph (after 2016)

€24.00 €30.00

Time left

Key switch mounting plate for Triumph (2016-... - liquid-cooled). This bracket allows you to relocate your key switch under the tank. Made from laser-cut stainless steel. You will need to relocate your key switch wiring harness. Supplied with all required stainless steel fasteners. Relocating your key switch results in loss of your motorcycle's steering...

BAAK injection cover for Triumph T100, Street Twin and Street Scrambler

BAAK injection cover for Triumph T100, Street Twin and Street Scrambler 2

-20%

Triumph

Injection cover for Triumph 900 (after 2016)

€52.00 €65.00

Time left

Pair of aluminium injection covers for Triumph (2016-...). These covers replace the originals and will give your machine a more refined look. They are compatible with Triumph Street Twin / Street Cup and Bonneville T100 (2016-...). Supplied as a pair, with all necessary stainless steel fasteners. Available in Satin Black and Brushed finish. Not compatible...

View

Aluminum intake covers for Royal Enfield 650 Interceptor / Continental GT

Aluminum intake covers for Royal Enfield 650 Interceptor / Continental GT 2

-20%

Interceptor / Continental GT 650

Injection covers for Royal Enfield 650 Interceptor / Continental GT

€52.00 €65.00

Time left

Pair of aluminium injection covers for Royal Enfield 650 Interceptor / Continental GT. These covers replace the originals and will give your machine a more refined look. Supplied as a pair, with all necessary stainless steel fasteners. Available in Satin Black and Brushed finish.

View

1
2

Home