Best sellers

Showing 1-24 of 96 item(s)

Mini LED turn signal mo.blaze Pin

Mini LED turn signal mo.blaze Pin 2

Parts

Mini LED turn signal mo.blaze Pin

Motogadget LED mini indicator 3W minimalist design in aluminum with Ø8mm stem. When off, the indicators are almost invisible, yet they offer ideal brightness when in use. We use them on most of our custom builds. Each indicator is crimped in our workshop with Japanese terminals to simplify installation on your motorcycle. Indicator dimensions: 19.5mm x...

View

Resistors for LED turn indicators

Parts

Resistors for LED turn indicators

Resistors for LED motorcycles turn indicators, essential to get a correct blinking speed once your LED blinkers are mounted on a motorcycle that isn't equipped with LED ones in stock configuration. Comes in pairs. You need two pairs to connect both front and rear turn signals on your motorcycle.

Plate support for Royal Enfield 650 Interceptor / Continental GT

Plate support for Royal Enfield 650 Interceptor / Continental GT 2

Interceptor / Continental GT 650

License plate holder for Royal Enfield 650 Interceptor / Continental GT

License plate holder for original Royal Enfield 650 Interceptor / Continental GT mudguard. Equipped with a taillight (CE approved), license plate lightning, compatible wiring harness and included turn indicators brackets to be mounted on your upper shock absorber axles or the license plate holder on choice. The EU approved LED taillight comes with its...

View

Classic rear mudguard for Moto Guzzi V7 / V7 850

Classic rear mudguard for Moto Guzzi V7 / V7 850 2

Moto Guzzi

Classic rear mudguard for Moto Guzzi V7 / V7 850

Classic rear mudguard for Moto Guzzi V7 I, V7 II, V7 III and V7 850, manufactured out of stainless steel. Shorter than your original rear mudguard, it has an elegant raw look thanks to the molded edge at its end. You will still keep good protection against the rear wheel projections. Equipped with a LED taillight (CE approved for road use) with license...

View

Moto Guzzi V7 850/V9 Skid Plate - Stainless Steel, Brushed or Black Satin

Moto Guzzi V7 850/V9 Skid Plate - Stainless Steel, Brushed or Black Satin 2

Parts

Engine protection for Moto Guzzi V7 850 - V9 (Euro 5)

Protect your Moto Guzzi V7 850, or V9 (Euro 5 Starting 2021) engine with this stainless steel skid plate. Available in two finishes: brushed or sleek satin black epoxy paint. Durable, stylish, and easy to install with all necessary mounting hardware included. It’s the perfect combo of looks and practicality, keeping your bike safe while turning heads....

View

Aluminium turn indicators holders for license plate

Aluminium turn indicators holders for license plate 2

Parts

Turn indicators holders on license plate

These aluminium turn indicators holders are designed to be assembled on a BAAK license plate holder, on the motorcycle of your choice. It's available in 3 different versions : For turn indicators with øM8 shafts For turn indicators with øM10 shafts For original / accessory Triumph turn indicators (2016-...) It comes with the necessary stainless steel...

View

Headlight brackets for original headlight for Triumph (2016 )

Headlight brackets for original headlight for Triumph (2016 ) 2

Triumph

Headlight brackets for original headlight for Triumph (2016 )

Headlight fixation brackets for Triumph original headlight (since 2016). This pair of lighthouse brackets come to replace the original ones and reveal the fork tubes. Suitable for the Triumph T120 / T100 Street Scrambler / Street Twin / Thruxton 1200 (since 2016) original headlights. The optional turn indicators brackets enable mount on the headlight...

View

Rectifier bracket for Triumph (2016)

Rectifier bracket for Triumph (2016) 2

Triumph

Rectifier bracket for Triumph (2016)

Rectifier bracket for Triumph (2016-... - liquid-cooled). This bracket enables you to relocate your rectifier behind your engine oil cooler instead of the lower fork trees to lighten the front of your bike. Manufactured out of stainless steel laser cut. You'll be obliged to relocate your wiring harness under your gas tank. Comes with all the necessary...

Classic Moto - universal flagship protection grid

Classic Moto - universal flagship protection grid 2

Parts

Classic headlight - universal protective grid

Handcrafted stainless steel headlight grille – The perfect combination of protection and classic style for your motorbike Crafted with passion in our workshop in France, this 3mm thick stainless steel headlight grille, coated with satin black epoxy paint, offers optimal and durable protection for your headlight, while asserting a timeless style. Designed...

Round 21W turn indicators I BAAK

Round 21W turn indicators I BAAK 2

Parts

Round 21W turn indicators

Round 21W Aluminum blinkers, 40mm (1&1/2") diameter, with 21W bulbs and M10 fixation shaft. Very nice finishes, much more discreet than most of the original turn indicators. Be careful to respect the polarity when connecting. Sold in pairs. UE approved for road use.

Radiator guard for Triumph (2016-...) T120 - T100 - Speed Twin 900

Radiator guard for Triumph (2016-...) T120 - T100 - Speed Twin 900 2

Parts

Radiator guard for Triumph (2016)

Protect your Triumph Bonneville (2016-...) radiator with this high-quality stainless steel guard, coated in premium satin black epoxy paint. Designed to last, it offers optimal protection without compromising engine cooling. Comes with stainless steel mounting hardware. Made in France

Front turn indicators brackets Royal Enfield 650 Interceptor / Continental GT

Front turn indicators brackets Royal Enfield 650 Interceptor / Continental GT 2

Interceptor / Continental GT 650

Front turn indicators brackets for Royal Enfield 650 Interceptor / Continental GT

Front turn indicators brackets for Royal Enfield 650 Interceptor / Continental GT. Simple and very discreet, these brackets are satin black powder coat painted and enable you mount any universal turn indicator with a øM8 or øM10 fixation on your Royal Enfield. It gets assembled under your lower from triple trees. It comes in pairs, sold without turn...

View

Aluminium intake cover for Royal Enfield 650 Interceptor / Continental GT

Aluminium intake cover for Royal Enfield 650 Interceptor / Continental GT 2

Interceptor / Continental GT 650

Aluminium intake covers for Royal Enfield 650 Interceptor / Continental GT

Pair of aluminium intake covers for Royal Enfield 650. These covers come in place of the original ones to give a better aesthetic look to your motorcycle. It comes by pair. It's available in Satin black and Brushed finish. It comes with all the necessary mounting hardware.

View

BAAK black aluminium headlight brackets for motorcycles

BAAK black aluminium headlight brackets for motorcycles 2

Parts

Universal short headlight clamps for classic motorcycles

Headlight bracket for motorcycles, for M8 side headlight fixation, with optional front turn indicators holders. Designed and manufactured at BAAK's in France. Perfect to put a BAAK headlight on your motorcycle and improve its finish level. Ø39 - 40mm for Moto Guzzi V7I / V7 II / V7 III / V7 850 / V9 (60mm size) Ø41 - 42mm for Triumph Bonneville T100 / SE...

View

License plate holder for Triumph Bobber original mudguard (2017)

License plate holder for Triumph Bobber original mudguard (2017) 2

Bonneville Bobber (2017 -...)

License plate holder for Triumph Bobber original mudguard (2017)

License plate holder for the original mudguard of the Triumph Bonneville Bobber (2017-...). This taillight / license plate support unit comes in place of the original part. It's equipped with an EU approved LED vintage taillight with LED integrated license plate lightning, a license plate triangle, a plug & play wiring harness, optional turn...

View

Bullet-type LED motorcycle turn indicators in black aluminum/brushed finish

Bullet-type LED motorcycle turn indicators in black aluminum/brushed finish 2

Parts

Bullet-type LED motorcycle turn indicators in black aluminum/brushed finish

Bullet-type motorcycle LED 10W turn signals in black aluminum with brushed trim combine elegance and efficiency. Featuring clear glass, they measure 20 mm in diameter and 36.5 mm in length. Mounting is simple, thanks to an M8mm screw fastener, and they are compatible with a 12 V system. Supplied sheathed and with ø3.2mm Japanese round crimped lugs....

View

Turn indicators / Brake light

Turn indicators / Brake light 2

Parts

Turn indicators / Brake light

These minimalism aluminum turn signals keep your motorcycle clean. The rear indicators incorporate stop lights and lights. The front indicators are classic. Light is powerful. Stem øM8, 38mm long, ø22mm optical. CE-approved

View

Front turn indicators bracket for Moto Guzzi V7 / V9

Front turn indicators bracket for Moto Guzzi V7 / V9 2

Moto Guzzi

Front turn indicators bracket for Moto Guzzi V7 / V9

Front turn indicators fixation bracket for Moto Guzzi V7 and V9, simple, effective and very discreet. It's stainless steel laser cut and satin black powder coat painted. It gets assembled on the upper regulator screw of your motorcycle. Sold without blinkers.

View

Harness for adaptable indicator Royal Enfield

Harness for adaptable indicator Royal Enfield 2

Parts

Harness for adaptable indicator Royal Enfield

This indicator wiring harness is essential for adapting new indicators to your Royal Enfield. The harness is plug & play with the original connectors of your motorcycle. This 160 mm harness is ideal for installing aftermarket indicators mounted on Japanese cylindrical male connectors ranging from ø3.2 mm to 3.7 mm.Made in France by BAAK.Sold in pairs.

Front turn indicators bracket for Triumph

Front turn indicators bracket for Triumph 2

Triumph

Front turn indicators bracket for Triumph

Front turn indicators bracket / support for Triumph is simple, effective and very discreet. It enables you relocate your turn indicators under the steering column. It's stainless steel laser cut and satin black powder coated. It's particularly suitable for our Rectifier bracket for Triumph, or can be tightened on the upper fixation of the oil cooling...

View

Micro LED turn signal mo.blaze Tens1

Micro LED turn signal mo.blaze Tens1 2

Home

Micro LED turn signal mo.blaze Tens1

Motogadget LED micro indicator – a minimalist design in aluminum with Ø8mm mounting stem. The mo.blaze tens by Motogadget is one of the smallest road-legal indicators in the world. Each indicator is crimped in our workshop with Japanese connectors to simplify installation on your bike. Available in Black or Polished aluminum finish. Indicator dimensions:...

View

Bouchon plat de réservoir pour triumph

Bouchon plat de réservoir pour triumph 2

Parts

Flat fuel tank cap for Triumph

Black finish only, without locking system. Made with a black anodized treatment for long-lasting durability and impeccable style. This product was carefully selected by the BAAK workshop team for its elegant look and superior quality. It is easily installed as a direct replacement for the original cap.

Classic headlight

Classic headlight 2

Parts

Classic headlight

Round headlight for classic motorcycles, with M8 side mount and ø180mm diameter. It features metal casing and bezel, with plastic glass, offering an exceptional level of finish. Its streamlined casing gives it a resolutely classic look. Depending on the motorcycle model chosen, a plug and play harness is supplied (which may justify a price difference...

View

Bates headlight

Bates headlight 2

Parts

Bates headlight

Bates headlight for motorcycle. This low fixation Bates style headlight is ø15cm diameter. It has a metal casing and trim ring. It's discreet and enables you get a better finish level on your motorcycle. It's available in Chromed, Satin Black or with Black casing and Brushed or Chromed trim ring. It comes with the fixation bracket designed for the model...

View

1
2
3
4