Best sellers

Showing 97-120 of 334 item(s)

T-shirt of the Month - BAAK

T-shirt of the Month - BAAK 2

Home

T-shirt of the Month - BAAK

Ultra-Limited July Edition. Dispatch from 1 July.

View

Short license plate holder for Triumph Scrambler 1200 XC/XE/X

Short license plate holder for Triumph Scrambler 1200 XC/XE/X 2

Parts

Short license plate holder for Triumph Scrambler 1200 XC/XE/X

More discreet than the stock setup, this aluminum accessory replaces the unsightly plastic license plate holder of the Scrambler 1200, while retaining the original mudguard. The license plate light comes pre-wired with a plug & play connector. In the photos, the taillight and indicators are Triumph optional accessories.

Rear Brake Master Cylinder Protection for Royal Enfield 650 Interceptor

Rear Brake Master Cylinder Protection for Royal Enfield 650 Interceptor 2

Royal Enfield

Rear Brake Master Cylinder Protection for Royal Enfield 650 Interceptor

Protect your rear brake master cylinder while adding an aesthetic touch to your Royal Enfield 650 with this robust and stylish protection. Available in a brushed or satin black finish, this inox protection is designed to withstand the elements and impacts.

View

Side leather saddlebag for Triumph Thruxton 1200 and Speed Twin

Side leather saddlebag for Triumph Thruxton 1200 and Speed Twin 2

Speed Twin 1200 (2019 -...)

Side leather saddlebag for Triumph Thruxton 1200 / Speed Twin 1200 (2016-...)

Side leather saddlebag for Triumph Thruxton 1200 / Thruxton R / Speed Twin (2016-...). This side bag is handcrafted at our workshop using the same leather as on our seats. It enables you transport some stuff and gives a retro distinguished look to your Triumph. It's available in Aged brown, gold, black leather. Saddlebag measurements: 20cm x 20cm x 7cm....

View

Triumph wheel arch/plate holder, rear position and turn signal holder

Triumph wheel arch/plate holder, rear position and turn signal holder 2

Triumph

License plate holder kit for Triumph Thruxton 1200 / Speed Twin 1200

Fender Eliminator Kit for Triumph Thruxton 1200 and Speed Twin Euro 4 / Euro 5 (2016 – …). This satin black aluminum undertray visually lightens the rear of your Triumph and gives it a more radical look. This kit includes a LED taillight (CE approved) with license plate lightning, a license plate holder on choice (side or classic position), turn...

View

Handlebar clamps for Royal Enfield 650 Interceptor / Continental GT

Handlebar clamps for Royal Enfield 650 Interceptor / Continental GT 2

Interceptor / Continental GT 650

Handlebar clamps for Royal Enfield 650 Interceptor / Continental GT

Machined aluminium handlebar clamps for Royal Enfield 650 Interceptor / Continental GT. These risers are available in ø22mm diameter, ø28,6mm diameter or 1 inch (ø25,4mm) diameter, it's lighter and elegant. The clamps are satin black powder coat painted, and come with all the stainless steel screwing kit compatible with your motorcycle. Designed and...

View

T-shirt BAAK Pocket "BMW"

T-shirt BAAK Pocket "BMW" 2

Home

T-shirt BAAK Pocket "BMW"

T-shirt "BAAK Pocket" BMW. This t-shirt is manufactured out of biologic cotton. It has a pocket on the left side of the chest with a black embroidered pattern, and our BMW NineT Bobber silk-screen printed on the back. This t-shirt has a Slim cut, the fabric is white color. It's mixed, both Him and Her will proudly wear it. Size S is more suitable for a...

View

License plate holder for Royal Enfield Classic / Bullet original mudguard

License plate holder for Royal Enfield Classic / Bullet original mudguard 2

Bullet / Classic (2008- ..)

License plate holder for Royal Enfield Classic / Bullet original mudguard

Discreet license plate holder for Royal Enfield Classic / Bullet 500 original mudguard. It's equipped with a ø70mm EU approved taillight with integrated license plate lightning, a plug & play wiring harness, turn indicators brackets on choice and optional turn indicators. This part comes in place of your original taillight / license plate holder unit....

View

Universal rear plate / fire support I BAAK

Universal rear plate / fire support I BAAK 2

Universal

Universal license plate holder / taillight

Universal license plate holder / taillight unit, with integrated license plate lightning, mounted on a universal plate holder. Distance between centers of the mounting holes: 45mm (M5 holes). Supplied with the necessary stainless hardware. You can fit this taillight / license plate holder on any rear mudguard. Light dimension : Diameter 70mm / Depth 50mm.

Bates headlight bracket

Bates headlight bracket 2

Parts

Bates headlight bracket

Fixation bracket for Bates headlight, required to assemble a headlight with a lower position fixation on your motorcycle. Manufactured out of aluminium, 4mm thick, black powder coat painted. Ø6mm between axes holes, adjustable from 68mm to 95mm Ø10mm headlight fixing holes

Universal Medium side leather saddlebag

Universal Medium side leather saddlebag 2

Parts

Universal Medium side leather saddlebag

Universal Medium leather side saddlebag for motorcycle. Handcrafted at our workshop, it enables you to bring some stuff while you ride, and gives a great vintage look to your motorcycle. It's available in aged brown, gold, black or ruby leather color. The bottom of the saddle is pre-drilled (120mm enter-axis) so you can assemble it easily on your bike....

View

Leather covered handlebar grips

Leather covered handlebar grips 2

Parts

Leather covered handlebar grips

Leather covered handlebars grips. Wrapped with a high quality leather, it gives a touch of chic to your motorcycle while keeping a good takeover. Available in aged brown, gold, black and ruby leather. Four thread stitchings colors available so it perfectly fits your bike. Available for ø25,4mm (1 inch) handlebars.

View

Short rear mudguard for Triumph (pre- 2016)

Short rear mudguard for Triumph (pre- 2016) 2

Triumph

Heritage rear mudguard for Triumph (pre- 2016)

Heritage rear mudguard for Triumph (pre-2016 - air-cooled) manufactured out of stainless steel. It's shorter than your original Triumph rear mudguard, but it respects the original Triumph lines making it visually lighter, while keeping a good protection against the rear wheel projections. Equipped with a LED taillight (CE approved for road use) with...

View

An artisanal mug born from the meeting between BAAK and Les Empotées, a ceramic artist from Dijon.

An artisanal mug born from the meeting between BAAK and Les Empotées, a ceramic artist from Dijon. 2

New

Home

Mug of the Month n°1

An artisanal piece born from the meeting between BAAK and Les Empotées, a ceramic artist from Dijon.Shaped and engraved by hand using French clay, each mug embodies our passion for detail and fine craftsmanship.A unique creation, designed to warm your hands, and your winter.

Trail engine guard - Triumph 1200 XE-XC

Trail engine guard - Triumph 1200 XE-XC 2

Home

Trail engine guard - Triumph 1200 XE-XC

Aluminum Trail Skid Plate for Triumph Scrambler 1200 XE-XC In addition to giving your Scrambler an adventurous look, this skid plate provides effective protection for the lower engine in all conditions. Made of 4 mm thick aluminum, it provides a real shield against splashes, stones, and impacts associated with aggressive off-road riding. Easy to install,...

View

Radiator sides - Fantic Caballero

Radiator sides - Fantic Caballero 2

Home

Radiator sides - Fantic Caballero

radiator flanks for Fantic Caballero Protect your radiator with these protection flanks specially designed for the Fantic Caballero 500. manufactured in brushed aluminum. sold in pairs. They integrate harmoniously into the Caballero design and can be associated with other accessories for an even more assertive look. Compatibility: Caballero...

VANS 25.4mm Handlebar Grips

VANS 25.4mm Handlebar Grips 2

Parts

VANS 25.4mm Handlebar Grips

Vans handlebar grips, right and left, for motorcycles. Featuring the classic waffle sole pattern of Vans® and constructed from ODI's exclusive grip compounds. For handlebars with a 25.4mm (1 inch) diameter, also available below in ø22mm. Sold in pairs.

Rear Fender Eliminator Kit Triumph 2016-...

Rear Fender Eliminator Kit Triumph 2016-... 2

Parts

Rear Fender Eliminator Kit Triumph 2016-...

Looking to streamline the rear of your Triumph Bonneville T100/T120, ST900, or Scrambler 900? This fender eliminator kit with a license plate holder allows you to completely remove the original rear fender. Made from aluminum and stainless steel, the kit comes with a homologated LED taillight and license plate illumination. A plug-and-play adapter...

View

Short seat kit rear loop for Royal Enfield 650

Short seat kit rear loop for Royal Enfield 650 2

Interceptor / Continental GT 650

Short seat kit rear loop for Royal Enfield 650

This rear loop is designed to shorten the back of your motorcycle, offering a sleek, minimalist style and a more compact overall silhouette. Made with a high-quality glossy black epoxy coating, it perfectly matches the frame’s color for discreet and seamless integration.

Short exhaust for Royal Enfield 650 Interceptor / Continental GT

Short exhaust for Royal Enfield 650 Interceptor / Continental GT 2

Interceptor / Continental GT 650

Short exhaust for Royal Enfield 650 Interceptor / Continental GT

Short exhaust line for Royal Enfield 650 Interceptor / Continental GT (2018-...), designed and manufactured by our craftsmen in France. The manifolds are stainless steel, the mufflers are aluminium. It provides a stronger and deeper sound than the original exhaust, but remains discreet. Despite the huge care we brought to making it discreet, it's not...

View

Rear turn indicators brackets for Triumph

Rear turn indicators brackets for Triumph 2

Triumph

Rear turn indicators brackets for Triumph

Rear turn signals bracket for Triumph. Enables you to mount your turn signals on the upper shock absorber axles for a more discreet look. Compatible with the original passenger grab handle. Make sure to select the right model of motorcycle so you can receive brackets suitable for your motorcycle. Comes in pairs. Length: 50mm.

View

Short exhaust for Triumph (2016-2024)

Short exhaust for Triumph (2016-2024) 2

Triumph

Short exhaust for Triumph (2016-2024)

Short Exhaust Line for Triumph T100 - T120 - Street Twin - Speed Twin 900 - Thruxton 1200 - Speed Twin 1200 (from 2016, liquid-cooled), designed and manufactured in our workshop. The headers are made of stainless steel, and the silencers are aluminum. This exhaust line delivers a deep, resonance-free sound that is not too loud. It is easy to install,...

View

Original turn indicators brackets kit for Triumph (2016)

Original turn indicators brackets kit for Triumph (2016) 2

Triumph

Original turn indicators brackets kit for Triumph (2016)

Turn signals brackets kit to relocate the factory or accessories indicators from Triumph that have keyed connection, to visually lighten your motorcycle. The front bracket comes on your oil-cooler, and the rear brackets come on the shock absorbers axles. These bracket kit comes without turn indicators.

View

Tracker bar handlebars

Tracker bar handlebars 2

Parts

Tracker bar handlebars

Tracker Bar handlebars, manufactured out of aluminium. This Tracker type handlebar has Ø28,6mm clamping diameter and Ø22mm controls diameter. It's 790mm wide. It offers much pullback to the rider which offers a comfortable riding position. It's available in satin black finish only.

View

1
…
4
5
6
…
14