Best sellers

Showing 49-72 of 80 item(s)

Medium front mudguard for Moto Guzzi V7

Medium front mudguard for Moto Guzzi V7 2

-20%

Moto Guzzi

Medium front mudguard for Moto Guzzi V7

€132.00 €165.00

Medium front mudguard for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9, manufactured out of stainless steel. It's short but it's still long enough to protect you from the front wheel splashes. It's pre-drilled so it fits the original fixation system of your motorcycle. It's designed and manufactured by our team at the workshop in France. It's available...

View

Batte headlight fixing for Moto Guzzi V9

Batte headlight fixing for Moto Guzzi V9 2

-20%

V9 (2016 -...)

Bates headlight bracket for Moto Guzzi V9

€20.00 €25.00

Bates headlight mounting bracket for Moto Guzzi V9, required to install a bottom-mounted headlight (Bates type) on your bike. Made from 3mm thick aluminum with satin black epoxy paint. Only available in black finish. This bracket is included by default with our Bates headlight kits for Moto Guzzi V9. Delivered with the required stainless steel hardware.

Bates taillight

Bates taillight 2

Universal

Bates taillight

Bates type universal LED taillight for motorcycle. This universal black light can be assembled on your rear mudguard. The fixation enable you to adjust the angle of the taillight. Available with a black housing and your choice for the trim ring: satin black, brushed or chromed.ø50mm diameter. This taillight is EU approved.

View

Universal aluminum number plaque

Universal aluminum number plaque 2

-20%

Home

Universal aluminum number plaque

€23.20 €29.00

Universal aluminum number. Dimensions Width 315 mm Height 210 mm. screws not supplied.

Bates Headlight with Integrated Speedometer for Royal Enfield 650 | BAAK

Bates Headlight with Integrated Speedometer for Royal Enfield 650 | BAAK 2

Parts

Bates Headlight / Integrated Speedometer for Royal Enfield 650

Bates Headlight with Integrated Motogadget Tiny Speedometer for Royal Enfield 650 Interceptor / Continental GT (2018–...). Built into a ø150mm Bates headlight shell, this integrated speedometer headlight is a Plug & Play solution to streamline the cockpit of your Interceptor or Continental GT while retaining all the functionalities of your original...

View

Headlight brackets for original headlights V7 III / V7 850 / V9

Headlight brackets for original headlights V7 III / V7 850 / V9 2

-20%

Parts

Headlight brackets for original headlights Moto Guzzi V7 III / V7 850 / V9

€103.20 €129.00

Enhance the look of your Moto Guzzi V7 III, V7 850 or V9 with these machined aluminum headlight clamps, compatible with original LED and bulb headlights. With a length of 60 mm and 39-40 mm mounting clamps, they also allow the installation of adaptable turn signals. Finished in satin-black epoxy, they are supplied in pairs with stainless steel screws...

View

Moto Guzzi V7 850 turn signal harness - Easy mounting | BAAK

Moto Guzzi V7 850 turn signal harness - Easy mounting | BAAK 2

Parts

Turn signal harness MOTO GUZZI V7 850

Need to fit aftermarket indicators to your Moto Guzzi? This plug & play harness is for you! Compatible with your motorcycle's original terminals, it adapts easily to turn signals. With Japanese terminals from ø3.2 mm to 3.7 mm. The practical solution for customizing your bike. Sold in pairsMade in France

Front-turn-indicators-bracket-Triumph-Bobber-1200

Front-turn-indicators-bracket-Triumph-Bobber-1200 2

-20%

Parts

Front turn indicators bracket for Triumph Bobber 1200

€20.00 €25.00

Turn signals brackets kit to relocate the indicators Triumph Bobber 1200 to visually lighten your motorcycle. The bracket comes on your oil-cooler.

View

Land Rover Defender Fender vents

Land Rover Defender Fender vents 2

-20%

Parts

Land Rover Defender Fender vents

€88.00 €110.00

The devil is in the details and this exactly why we’ve decide to add these beautiful metal fender vents to our new line of parts for Land Rover Defender. These are beautiful upgrades over the factory plastic vents. Both the Design and R&D departments worked jointly on this line of parts so Defender’s owner can personalized their beloved vehicle to...

View

Bates headlight plate with leather collars for Royal Enfield Interceptor / Continental GT 650

Bates headlight plate with leather collars for Royal Enfield Interceptor / Continental GT 650 2

-20%

Interceptor / Continental GT 650

Bates headlight plate for Royal Enfield 650 Interceptor / Continental GT

€132.00 €165.00

Bates headlight plate for Royal Enfield 650 Interceptor / Continental GT (2018-...). Attention, this part is only compatible with our Flat triple trees kit, it requires to move the ignition switch under the gas tank. Manufactured out of aluminium, this plate comes to hide the steering column and cables left visible after the assembly of a Bates...

View

Bates headlight / integrated speedometer for Triumph (2016-...) by BAAK

Bates headlight / integrated speedometer for Triumph (2016-...) by BAAK 2

Triumph

Bates headlight / integrated speedometer for Triumph (2016-...)

Bates headlight / integrated speedometer for Triumph (2016-... / Liquid cooling) Integrated into the housing of a ø150mm Bates headlight, this motogadget Tiny Plug & Play speedometer is a simple solution to streamline the cockpit of your Triumph while retaining the information from your original speedometer. The assembly is delivered pre-wired, with...

View

Air filters kit for BMW NineT I BAAK

Air filters kit for BMW NineT I BAAK 2

BMW

Air filters kit for BMW NineT

Air filters kit for BMW NineT. This kit includes two black air filters and a red oil breather. The air filters plug directly on the intake, in place of the original air intake pipes of your BMW NineT. No power or torque improvement with this kit, it's simply an aesthetic modification. We recommend you to go for our Aluminium battery box along with this...

Bates headlight / integrated speedometer for Triumph (pre-2016)

Bates headlight / integrated speedometer for Triumph (pre-2016) 2

Triumph

Bates headlight / integrated speedometer for Triumph (pre-2016)

Bates headlight with integrated motogadget Tiny speedometer for Triumph (pre-2016 – air-cooled) Integrated into the housing of a ø150mm Bates headlight, this headlight with integrated speedometer is a Plug & Play solution to streamline your cockpit while keeping the functions of your original speedometer. This speedometer comes in a plug & play...

View

Vintage taillight

Vintage taillight 2

Parts

Vintage taillight

Vintage motorcycle universal taillight manufactured out of steel. This Ø65mm diameter LED light includes a license plate lightning under the light. Made in durable steel and then powder coated in black this tail light is available with or without the "STOP" brushed insert. Much more discreet than most of the factory taillights, and a will give your bike...

View

Rear mudguard wiring harness for Triumph

Rear mudguard wiring harness for Triumph 2

Triumph

Rear mudguard wiring harness for Triumph

Rear mudguard wiring harness for Triumph. This wiring harness is necessary to connect an aftermarket set of turn indicators and taillight on your Triumph. It's plug & play over the factory connector, just make sure to select the right model. Comes standard with all the mudguards we sell for Triumph. Manufactured at BAAK's workshop in France.

View

Headlight grille for BMW R12

Headlight grille for BMW R12 2

-20%
New

Home

Headlight grille for BMW R12

€78.40 €98.00

Protect your BMW R12's headlight in style with this Classic protective grille, crafted from stainless steel for optimal durability. Its satin black epoxy coating gives it a sleek and elegant look, perfectly in keeping with the R12's retro aesthetic. Made in France, manufactured in our workshop.

Removable windshield Moto Guzzi V7 III, V7 850, V9 | Retro and protection

Removable windshield Moto Guzzi V7 III, V7 850, V9 | Retro and protection 2

Parts

Removable windshield for Moto Guzzi V7 III / V7 850 / V9

Give your Moto Guzzi V7 III, V7 850 or V9 a retro-touring touch with this removable windscreen. 2 sec to remove without tools. Supplied complete with fastenings and matching headlight brackets, it's available in gloss black or leather (black or brown). Please note that the original headlamp is not suitable, so you'll need a ø180mm classic headlamp and a...

View

Universal motorcycle front headlight brackets

Universal motorcycle front headlight brackets 2

-20%

Parts

Universal motorcycle front headlight brackets

€103.20 €129.00

Mounting brackets for front motorcycle headlight, ø180mm, with lateral fixings for ø8mm bolts. They measure 85mm in length and are only available for ø41mm fork tubes. You can choose the option with two indicator mounting brackets, ø8mm or ø10mm (or none). Collars and bolts are made of stainless steel, and the brackets are made of aluminum, all painted...

View

Side license plate holder for Royal Enfield 650 Interceptor / Continental GT

Side license plate holder for Royal Enfield 650 Interceptor / Continental GT 2

-20%

Interceptor / Continental GT 650

Side license plate holder for Royal Enfield 650 Interceptor / Continental GT

€134.40 €168.00

This side license plate holder for Royal Enfield 650 Interceptor / Continental GT (2018-...) is designed to be mounted on your passenger footrest. It will let you clean the rear end of your motorcycle by re-locating the license plate. It comes with an EU approved taillight with integrated license plate lightning. It comes with a plug & play wiring...

Black adjustable shock absorber for BMW R 1200 NineT by BAAK

Black adjustable shock absorber for BMW R 1200 NineT by BAAK 2

Parts

Shock absorber for BMW NineT

Big Body shock absorber for BMW R 1200 NineT 1200 (2017-...). This mono shock absorber is manufactured in France by our partner Shock Factory. It offers a finish level and look that can't be compared to the original one. It's easy to adjust thanks to one only synchronized knob which adjust both compression and relaxation (48 different levels of setting)...

Classic headlight / integrated speedometer for Triumph (2016-...) BAAK

Classic headlight / integrated speedometer for Triumph (2016-...) BAAK 2

Triumph

Classic Headlight / Integrated Speedometer for Triumph (2016–...)

Classic Headlight / Integrated Speedometer for Triumph (2016–... – Liquid-cooled) Integrated into the housing of a ø180mm Classic headlight with M8 side mounts, this Plug & Play speedometer is a simple solution to streamline the cockpit of your Triumph while keeping the original information display and ensuring optimal readability. The speedometer...

View

Headlight plate for Bates Headlight for Triumph (2016-...)

Headlight plate for Bates Headlight for Triumph (2016-...) 2

-20%

Triumph

Bates headlight plate for Triumph (2016)

€135.20 €169.00

Bates headlight plate for Triumph (since 2016 - liquid-cooled). This aluminium plate comes to hide the steering column and cables running around after you mounted a Bates headlight (with lower fixation) on your Triumph. The 4 leather collars (brown, black, gold or ruby color) attach the plate to your fork tubes. Available in Satin black or Brushed...

View

Speedometer lowering kit for BMW NineT

Speedometer lowering kit for BMW NineT 2

-20%

BMW

Speedometer lowering kit for BMW NineT

€17.60 €22.00

Lowering kit for BMW NineT speedometer. These 4 struts enable you lower your original NineT speedometer by 10mm, to get a clear riding post. Suitable for BMW NineT Pure, Scrambler, Racer and Urban GS.

T-shirt BAAK Helmet "Olive"

T-shirt BAAK Helmet "Olive" 2

T-shirt BAAK Helmet "Olive"

T-shirt BAAK Helmet "Olive". The importance of this t-shirt can be found in the details : a helmet is cross-stitch embroidered, true to BAAK's work. It's available in two colors. The t-shirt is olive green color, the helmet embroidered on the chest is in shades of blue. It's mixed, both Him and Her will proudly wear it.

View

1
2
3
4