Best sellers

Showing 37-72 of 103 item(s)

-70%

Home

T-shirt BAAK Pocket "BMW"

€8.70 €29.00

T-shirt "BAAK Pocket" BMW. This t-shirt is manufactured out of biologic cotton. It has a pocket on the left side of the chest with a black embroidered pattern, and our BMW NineT Bobber silk-screen printed on the back. This t-shirt has a Slim cut, the fabric is white color. It's mixed, both Him and Her will proudly wear it. Size S is more suitable for a...

View

License plate holder for Royal Enfield Classic / Bullet original mudguard

License plate holder for Royal Enfield Classic / Bullet original mudguard 2

-30%

Bullet / Classic (2008- ..)

License plate holder for Royal Enfield Classic / Bullet original mudguard

€117.60 €168.00

Discreet license plate holder for Royal Enfield Classic / Bullet 500 original mudguard. It's equipped with a ø70mm EU approved taillight with integrated license plate lightning, a plug & play wiring harness, turn indicators brackets on choice and optional turn indicators. This part comes in place of your original taillight / license plate holder unit....

View

Relocated ignition switch control bracket kit for Triumph (pre- 2016)

-35%

Triumph

Relocated ignition switch control bracket kit for Triumph (pre- 2016)

€31.85 €49.00

Relocated ignition switch control bracket for Triumph (pre-2016 - air-cooled). This simple ignition switch support enables you to relocate the ignition control between the fuel tank and the left carburetor. Fits on the right side on the injection models (EFI). It requires to move the wiring harness that is in your headlight, under the gas tank, without...

Short rear mudguard for Triumph (pre- 2016)

-20%

Triumph

Heritage rear mudguard for Triumph (pre- 2016)

€288.00 €360.00

Heritage rear mudguard for Triumph (pre-2016 - air-cooled) manufactured out of stainless steel. It's shorter than your original Triumph rear mudguard, but it respects the original Triumph lines making it visually lighter, while keeping a good protection against the rear wheel projections. Equipped with a LED taillight (CE approved for road use) with...

View

Parts

Exhaust wrap

€93.60

Here are 15 meters (or 49') of exhaust wrap, 5 cm wide (1'' & 31/32), to wrap up your exhaust system and get the BAD BOY look you're aiming at! For the black color thermal wrap, we highly recommend you to paint it with an high temperature paint so the color can resist over the months. Available in Black or Beige color. This is high quality part,...

View

Rear Fender Eliminator Kit Triumph 2016-...

Parts

Rear Fender Eliminator Kit Triumph 2016-...

€240.00

Looking to streamline the rear of your Triumph Bonneville T100/T120, ST900, or Scrambler 900? This fender eliminator kit with a license plate holder allows you to completely remove the original rear fender. Made from aluminum and stainless steel, the kit comes with a homologated LED taillight and license plate illumination. A plug-and-play adapter...

View

Rear Brake Master Cylinder Protection for Royal Enfield 650

-35%

Royal Enfield

Rear Brake Master Cylinder Protection for Royal Enfield 650

€23.40 €36.00

Protect your rear brake master cylinder while adding an aesthetic touch to your Royal Enfield 650 with this robust and stylish protection. Available in a brushed or satin black finish, this inox protection is designed to withstand the elements and impacts.

View

-20%

Triumph

Classic Mini front mudguard for Triumph

€86.40 €108.00

Classic Mini front mudguard for Triumph, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. We drill holes on this mudguard according to the model of Triumph you choose. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black, brushed and...

View

Triumph

License plate holder kit for Triumph Thruxton 1200 / Speed Twin 1200

€210.00

Fender Eliminator Kit for Triumph Thruxton 1200 and Speed Twin Euro 4 / Euro 5 (2016 – …). This satin black aluminum undertray visually lightens the rear of your Triumph and gives it a more radical look. This kit includes a LED taillight (CE approved) with license plate lightning, a license plate holder on choice (side or classic position), turn...

View

License plate holder triangle for Triumph Thruxton / Speed Twin 1200

License plate holder triangle for Triumph Thruxton / Speed Twin 1200 2

-40%

Thruxton 1200 (2016 -...)

License plate holder triangle for Triumph Thruxton / Speed Twin 1200

€33.00 €55.00

License plate holder triangle for rear fender eliminator kit of Triumph Thruxton 1200 or Speed Twin 1200 (2016-...). This support is dedicated to be assembled on the optional Rear fender removal kit offered by Triumph Motorcycles, or stands for a Short license plate holder for original rear fender on a Speed Twin. It enables you to remove the reflectors...

View

Universal rear plate / fire support I BAAK

-20%

Universal

Universal license plate holder / taillight

€67.20 €84.00

Universal license plate holder / taillight unit, with integrated license plate lightning, mounted on a universal plate holder. Distance between centers of the mounting holes: 45mm (M5 holes). Supplied with the necessary stainless hardware. You can fit this taillight / license plate holder on any rear mudguard. Light dimension : Diameter 70mm / Depth 50mm.

Rear turn indicators brackets for Triumph

-35%

Triumph

Rear turn indicators brackets for Triumph

€19.50 €30.00

Rear turn signals bracket for Triumph. Enables you to mount your turn signals on the upper shock absorber axles for a more discreet look. Compatible with the original passenger grab handle. Make sure to select the right model of motorcycle so you can receive brackets suitable for your motorcycle. Comes in pairs. Length: 50mm.

View

Triumph

Side number panel for Triumph (2016)

€120.00

Currently unavailable for sale Side number panel for Triumph (2016-...) manufactured out of aluminium. The number plate is placed on a side aluminium cover that comes to replace the original cover, with all the necessary screwing system. Available for Right or Left side, with the side cover in Brushed or Satin black finish. Made in France

View

-15%

Universal

Universal handlebars controls kit

€168.30 €198.00

This Universal handlebars controls kit is essential to clear your cockpit. Each part of the kit must be purchased separately : Brake master cylinder Throttle Clutch lever This kit designed by our craftsmen shows a perfect finish level thanks to his assembly quality and satin black powder coat painting. These parts are available for classic and vintage...

View

Aluminium intake cover for Triumph 900 (2016-...)

-30%

Triumph

Intake covers for Triumph 900 (2016)

€45.50 €65.00

Pair of aluminium intake covers for Triumph (2016-...). These covers come in place of the original ones to give a better aesthetic look to your motorcycle. It's suitable for Triumph Street Twin / Street Cup and Bonneville T100 (2016-...). It comes by pair. It's available in Satin black and Brushed finish. It comes with all the necessary mounting...

View

License plate holder for original Moto Guzzi V9 fender

License plate holder for original Moto Guzzi V9 fender 2

-30%

V9 (2016 -...)

License plate holder for original Moto Guzzi V9 fender

€117.60 €168.00

License plate holder for original rear fender of Moto Guzzi V9. This bracket, painted in satin black epoxy, mounts directly in place of the original unit. It consists of a license plate holder, a round LED tail light (EU approved) with license plate illumination, a pair of indicator brackets of your choice, and a plug & play wiring harness.

View

Triumph

Wide fork triple trees kit for Triumph T100-T120 (2016)

€1,200.00

Wide fork triple yokes kit for Triumph Bonneville T100 / T120 (2016-... - liquid-cooled), it enables you mount a wide front tire (3.50). The kit includes the upper and lower triple trees 20mm wider, the lower bearing, the brake discs struts, the handlebar clamps and the wheel axle. Enable to lower the front end by 25mm. This kit is used on our Triumph...

View

Triumph

Short leather seat kit for Triumph (pre- 2016)

€1,290.00

Short leather seat kit for Triumph (before 2016 - air-cooled). This leather seat kit enables you shorten the rear end of the motocycle to reach a more compact look while keeping two seatings to bring a passenger. No welding required. It comes with assembly instructions. Comes with: Machined aluminium short subframe system Genuine short leather seat...

View

-20%

Triumph

Mini front mudguard for Triumph

€132.00 €165.00

Mini front mudguard for Triumph, manufactured out of stainless steel. This front fender is very short, it enables you get a more compact look on the front end of your motorcycle. It's pre-drilled so you can easily fit it on your model of Triumph. It's designed and manufactured by our team at the workshop in France. It's available in satin black,...

View

License plate holder for US format with light mount

License plate holder for US format with light mount 2

-35%

Parts

License plate holder for US format with light mount

€29.25 €45.00

This license plate holder is suitable for US size license plates (horizontal). It's manufactured out of 3mm thick aluminium and it's satin black powder coat painted. This support allows you to mount a license plate light. This part is only suitable for BAAK license plate holders.

Reinforced aluminium engine protection for Royal Enfield 650 Interceptor and Continental GT

Reinforced aluminium engine protection for Royal Enfield 650 Interceptor and Continental GT 2

-35%

Interceptor / Continental GT 650

Trail engine protection for Royal Enfield 650 Interceptor / Continental GT

€81.25 €125.00

Aluminium engine protection for Royal Enfield 650 Interceptor / Continental GT (2018-...). In addition to offering your Royal Enfield an adventurer look, this sump guard provides a real protection to your motorcycle in any situation. His 4mm thick aluminium structure is a bulwark against the terrain bumps that could his your engine block. Very easy to...

View

Front mudguard risers kit for Royal Enfield 650 Interceptor / Continental GT

Front mudguard risers kit for Royal Enfield 650 Interceptor / Continental GT 2

-40%

Interceptor / Continental GT 650

Front mudguard risers kit for Royal Enfield 650 Interceptor / Continental GT

€19.80 €33.00

Risers kit for Royal Enfield 650 Interceptor / Continental GT front mudguard. This 4 screws and 4 aluminium struts enable you to lift up your front mudguard by 10mm if you plan to mount a wider and higher tire on your Royal Enfield 650 Interceptor / Continental GT. Suitable for your original mudguard. The struts must be mounted between your original...

-30%

Triumph

Side license plate holder for Triumph

€66.50 €95.00

Side license plate support / holder for Triumph. It attaches to the upper axis of the left shock absorber. It comes with a connection wiring harness that makes it 100% plug and play. Satin black powder coat painting finish. If you choose the optional turn indicators, we'll provide the potential resistors necessary for their proper functioning according...

View

Triumph

Monza gas cap for Triumph

€150.00

Monza gas cap for Triumph Modern Classics. The timeless design of this Monza cap will perfectly suit your gas tank thanks to our adapter. Only suitable for Triumph Modern Classics: Air cooled (2000-2016) and new Liquid Cooled (since 2016). The full kit is composed by the polished aluminium gas cap, a seal, the necessary mounting hardware and the adapter....

-30%

Royal Enfield

Rear Footpeg Mounting Plate for Royal Enfield 650

€84.00 €120.00

Designed to move the passenger foot pegs forward and down, making room for the installation of large saddlebags while increasing passenger comfort without interfering with the rider. This is a sturdy stainless steel plate with a satin black epoxy coating.

Universal classic-vintage motorcycle rear mudguard

Universal classic-vintage motorcycle rear mudguard 2

-15%

Parts

Universal classic-vintage motorcycle rear mudguard

€102.00 €120.00

An essential accessory for retro motorcycle enthusiasts. Made from stainless steel, this fender is designed to give your motorcycle an authentic and elegant look. With its classic design and neat finish, it will add a unique touch of style to your café-racer, scrambler, or other motorcycle. This fender is specially designed to fit classic and vintage...

View

US license plate holder with tail light support

US license plate holder with tail light support 2

-35%

Parts

US license plate holder with tail light support

€29.25 €45.00

This license plate holder is suitable for US format license plates (horizontal 170x100mm). It's made of 3mm thick aluminum, painted in satin black epoxy paint. This bracket must be purchased in addition to the original fender license plate support to convert it to fit USA plates. It's compatible with this Vintage Tail Light. Made in France

Black front mudguard holder for Royal Enfield 650 Interceptor / Continental GT

Black front mudguard holder for Royal Enfield 650 Interceptor / Continental GT 2

-15%

Interceptor / Continental GT 650

Black front mudguard holder for Royal Enfield 650 Interceptor / Continental GT

€40.80 €48.00

Black front mudguard holder for Royal Enfield 650 Interceptor et Continental GT (2018-...). This black front fender bracket comes in place of the original grey color front fender holder of your Royal Enfield. This is the perfect accessory if, just like us, you pay attention to all the finish details of your machine. Suitable for both original mudguard...

-70%

T-shirt BAAK Helmet "Grey"

€11.70 €39.00

T-shirt BAAK Helmet "Grey". The importance of this t-shirt can be found in the details : a helmet is cross-stitch embroidered, true to BAAK's work. It's available in two colors. The t-shirt is grey color, the helmet embroidered on the chest is in shades of orange. It's mixed, both Him and Her will proudly wear it.

View

Bates headlight plate for Triumph (pre-2016)

-30%

Triumph

Bates headlight plate for Triumph (pre-2016)

€118.30 €169.00

Bates type headlight plate for Triumph (pre- 2016 - air-cooled). Essential to hide the steering column and all the cables after the mounting of a Bates headlight. Comes with 4 black leather clamps in black, aged brown, gold or ruby color. Available in satin black and raw aluminium finish. Measurements : 220mm x 190mm.

View

Lowering kit for Triumph T100-T120 (2016)

-15%

Triumph

Lowering kit for Triumph T100-T120 (2016)

€1,071.00 €1,260.00

Aluminium upper triple trees kit for lowering, available for Triumph Bonneville T100 / T120 / Street Twin (2016-... - liquid-cooled). It includes the flat upper triple tree, the handlebar clamps, the ignition switch and / or speedometer bracket, and the short Big Body shock absorbers. This lowering kit was designed and manufactured at our workshop. We...

View

-20%

Moto Guzzi

Mini front mudguard for Moto Guzzi

€132.00 €165.00

Mini front mudguard for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9, manufactured out of stainless steel. This front fender is very short, it enables you visually lighten the front of your motorcycle. It's pre-drilled so it fits the original fixation system of your motorcycle. It's designed and manufactured by our team at the workshop in France. It's...

View

Triumph

2Win shock absorbers for Triumph (pre-2016)

€517.20

2Win aluminum shock absorbers for Triumph (before 2016 - air-cooled). These shocks are adjustable in spring preload and hydraulic. Each click of the knob changes the setting of hydraulic compression and rebound simultaneously, it's very easy to use even while riding. If you choose a shorter set than the original one, we recommend you to also go for our...

View

Headlight brackets for original headlights V7 III / V7 850 / V9

Headlight brackets for original headlights V7 III / V7 850 / V9 2

-35%

Parts

Headlight brackets for original headlights Moto Guzzi V7 III / V7 850 / V9

€83.85 €129.00

Enhance the look of your Moto Guzzi V7 III, V7 850 or V9 with these machined aluminum headlight clamps, compatible with original LED and bulb headlights. With a length of 60 mm and 39-40 mm mounting clamps, they also allow the installation of adaptable turn signals. Finished in satin-black epoxy, they are supplied in pairs with stainless steel screws...

View

License plate holder for US format side license plates

License plate holder for US format side license plates 2

-35%

Parts

License plate holder for US format side license plates

€29.25 €45.00

This license plate holder is suitable for US size license plates (vertical) mounted in side position. It's manufactured out of 3mm thick aluminium and it's satin black powder coat painted. This part is only suitable for BAAK side license plate holders.

Triumph

Brembo brake pads for Triumph

€51.80

Brembo front brake pads for Triumph. Softer than the original ones, these front brake pads are manufactured out of high quality material that provides a perfect braking constancy, as much in cold or high temperature conditions. The friction coefficient is higher than on your original Triumph brake pads, which provide excellent braking performances and...