Products

Showing 1-36 of 59 item(s)

Parts

Leather Conditioner

This leather conditioner is a nourishing milk. It penetrates and nourishes the leather. You can use it for your saddles but also for your other leather products : shoes, jackets, gloves, saddlebags, etc. It comes with all the seat we offer. Capacity : 100 ml.

2Win shock absorbers for Moto Guzzi V7I / V7II

2Win shock absorbers for Moto Guzzi V7I / V7II 2

V7 I & V7 II (2007-2017)

2Win shock absorbers for Moto Guzzi V7I et V7II

€466.00

Aluminum 2Win shock absorbers for Moto Guzzi V7 I and V7 II. These shocks are adjustable in spring preload and hydraulic. Each click of the knob changes the setting of hydraulic compression and rebound simultaneously, it's very easy to use. BAAK developed a shorter shock compared the original one, to give a chunky look to your bike, without loosing...

Moto Guzzi

Rear mudguard wiring harness for Moto Guzzi

€19.00

Rear mudguard wiring harness for Moto Guzzi. This wiring harness is essential to connect an aftermarket set of turn indicators and taillight on your Moto Guzzi. It's plug & play over the factory connector. This parts fit the Moto Guzzi V7, V7 II, V7 III, V7 850 and V9. It's available in Short and Long size. Subject to the right wiring length on your...

Classic rear mudguard for Moto Guzzi V7 / V7 850

-15%

Moto Guzzi

Classic rear mudguard for Moto Guzzi V7 / V7 850

€255.00 €300.00

Time left

Classic rear mudguard for Moto Guzzi V7 I, V7 II, V7 III and V7 850, manufactured out of stainless steel. Shorter than your original rear mudguard, it has an elegant raw look thanks to the molded edge at its end. You will still keep good protection against the rear wheel projections. Equipped with a LED taillight (CE approved for road use) with license...

Classic Medium front mudguard for Moto Guzzi

-15%

Moto Guzzi

Classic Medium front mudguard for Moto Guzzi

€102.00 €120.00

Time left

Classic Medium front mudguard for Moto Guzzi V7 I, V7 II, V7 III and V7 850, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled so it fits the original fixation system of your motorcycle. It's designed and manufactured by our team at the workshop in France. It's available in satin black,...

Classic Mini front mudguard for Moto Guzzi

-15%

Moto Guzzi

Classic Mini front mudguard for Moto Guzzi

€91.80 €108.00

Time left

Classic Mini front mudguard for Moto Guzzi V7 I, V7 II, V7 III and V7 850, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled so it fits the original fixation system of your motorcycle. It's designed and manufactured by our team at the workshop in France. It's available in satin black,...

-15%

Moto Guzzi

Medium front mudguard for Moto Guzzi V7

€140.25 €165.00

Time left

Medium front mudguard for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9, manufactured out of stainless steel. It's short but it's still long enough to protect you from the front wheel splashes. It's pre-drilled so it fits the original fixation system of your motorcycle. It's designed and manufactured by our team at the workshop in France. It's available...

-15%

Moto Guzzi

Mini front mudguard for Moto Guzzi

€140.25 €165.00

Time left

Mini front mudguard for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9, manufactured out of stainless steel. This front fender is very short, it enables you visually lighten the front of your motorcycle. It's pre-drilled so it fits the original fixation system of your motorcycle. It's designed and manufactured by our team at the workshop in France. It's...

Gas tank leather belt for Moto Guzzi V7I / II

-15%

Moto Guzzi

Gas tank leather belt for Moto Guzzi V7I / II

€122.40 €144.00

Time left

Leather gas tank strap / belt for Moto Guzzi V7 I and V7 II. It enables to wrap your gas tank and to give it a distinguished look. It's available in black, aged brown and gold leather colors so it perfectly suits your motorcycle. The straps get easily assembled on the gas tank cap thanks to two aluminium brackets. An adjustable nylon belt enables you to...

Moto Guzzi

Classic leather seat for Moto Guzzi V7

€690.00

Classic leather seat for Moto Guzzi V7I, V7II et V7III. This seat is manufactured by our craftsmen at the workshop in France, based on a Moto Guzzi seat pan so it perfectly fits your motorcycle. It's narrower than the original one and offers a refined look while keeping a perfect seating comfort. It's available in Aged brown, Black, Gold leather color....

Moto Guzzi

Heritage leather seat for Moto Guzzi V7

€690.00

Heritage leather seat for Moto Guzzi V7I, V7II et V7III. This seat is handcrafted by our craftsmen at the BAAK's workshop in France, based on an original Moto Guzzi seat pan so it perfectly fits your motorcycle. It's narrower than the original one, the shape of the leather cover makes it look very thin while keeping a good seating comfort. It's available...

Parts

Racer leather seat for Moto Guzzi V7

€690.00

Racer leather seat for Moto Guzzi V7I, V7II et V7III. This seat is handcrafted by our craftsmen at BAAK's workshop in France, based on a Moto Guzzi seat pan so it remains perfectly suitable for your motorcycle. It's narrower than the original seat, it gives you a cafe racer look. It's available in Aged brown, Black, Gold leather color. Choose a classic,...

Rear turn indicators brackets for Moto Guzzi

-15%

Moto Guzzi

Rear turn indicators brackets for Moto Guzzi

€25.50 €30.00

Time left

Rear turn signals bracket for Moto Guzzi. Enables you to mount your blinkers / indicators on the upper shock absorber axles for a more discreet look. Comes in pairs. This part is available for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9.

Front turn indicators bracket for Moto Guzzi V7 / V9

-15%

Moto Guzzi

Front turn indicators bracket for Moto Guzzi V7 / V9

€25.50 €30.00

Time left

Front turn indicators fixation bracket for Moto Guzzi V7 and V9, simple, effective and very discreet. It's stainless steel laser cut and satin black powder coat painted. It gets assembled on the upper regulator screw of your motorcycle. Sold without blinkers.

Side license plate holder for Moto Guzzi

-15%

Moto Guzzi

Side license plate holder for Moto Guzzi

€80.75 €95.00

Time left

License plate support / holder for Moto Guzzi. This part gets attached on the left upper shock absorber axis. It comes with a plug & play wiring harness. This support is satin black powder coat painted. If you choose the optional turn indicators, we'll provide the wiring harness and potential resistors necessary for their proper functioning according...

High Scrambler front mudguard for Moto Guzzi V7I and V7II

High Scrambler front mudguard for Moto Guzzi V7I and V7II 2

-15%

V7 I & V7 II (2007-2017)

Scrambler front mudguard for Moto Guzzi V7I / V7II

€242.25 €285.00

Time left

High front fender for Moto Guzzi V7I and V7II. This Scrambler look front mudguard is handcrafted out of stainless steel, and gets assembled on the lower triple trees of your V7 thanks to the provided black fixation bracket. It offers a good protection and a strong off road look to your motorcycle. Available in Glossy black, Satin black, Brushed and...

Parts

Mirror adapter

€15.00

Handlebar adapters, required to mount some mirrors on your handlebar. We offer two different solutions : Adapter for ø22mm handlebars, to mount our mirrors in underbar position (M10 threading) Through rod type adapter, to mount a mirror on a through rod type fixation in classic or underbar position

Parts

H4 Yellow bulb

€12.00

Yellow H4 bulb for motorcycle lighthouse. This bulb adapts to any lighthouse equipped with an original H4 bulb. It allows you to provide the lighting of your machine with a resolutely vintage appearance, without affixing a filter on the window of your headlight. This product preserves the lighting qualities of your machine, to be favored with respect to...

Parts

Exhaust wrap

€69.00

Here are 15 meters (or 49') of exhaust wrap, 5 cm wide (1'' & 31/32), to wrap up your exhaust system and get the BAD BOY look you're aiming at! For the black color thermal wrap, we highly recommend you to paint it with an high temperature paint so the color can resist over the months. Available in Black or Beige color. This is high quality part,...

Parts

Left 3-buttons universal switch

€300.00

Universal handlebar controls, including :- an ON/OFF/ON turn signal switch- a push button for the horn- a push button for full headlights (may require adaptation of a relay) Available for 22mm (7/8") or 25,4mm (1") diameter handlebar. This part has a satin black powder coating, and is designed to be riveted to your handlebar.

-15%

Parts

Headlight struts

€18.70 €22.00

Time left

Motorcycle headlight struts, manufactured out of aluminum, to perfectly adjust the position of your headlight. The hole diameter is ø8mm, the exterior diameter is ø29mm. For Moto Guzzi V7 Classic or Heritage headlight, choose the 10mm ones. For Triumph and Royal Enfield Classic or Heritage headlight, choose the 5mm ones. Comes in pairs.

Parts

Headlight harness for Moto Guzzi

€27.00

This headlight cluster for Moto Guzzi is compatible with V7, V7 II, V7 III, and V7 850 models. Ideal for your motorcycle customization projects. Two choices for : Plug-and-play installation of an adaptable headlight. Convert your Moto Guzzi, which has an original LED headlight, for an adaptable bulb headlight. Sold individually.Made in France

Parts

Vintage taillight

€44.00

Vintage motorcycle universal taillight manufactured out of steel. This Ø65mm diameter LED light includes a license plate lightning under the light. Made in durable steel and then powder coated in black this tail light is available with or without the "STOP" brushed insert. Much more discreet than most of the factory taillights, and a will give your bike...

View

-15%

Parts

Universal Classic rear mudguard

€255.00 €300.00

Time left

Classic Universal rear mudguard manufactured out of stainless steel. Shorter than your original rear mudguard, it has an elegant raw look thanks to the molded edge at its end. You will still keep good protection against the rear wheel projections. Equipped with a LED taillight (CE approved for road use) with license plate lightning and a license plate...

Universal Classic Medium front mudguard 2

-15%

Parts

Universal Classic Medium front mudguard

€96.90 €114.00

Time left

Universal Classic Medium front mudguard, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's not pre-drilled so you can fit it on any model of motorcycle. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black, brushed and ready to...

-15%

Parts

Universal Classic Mini front mudguard

€86.70 €102.00

Time left

Universal Classic Mini front mudguard, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's not pre-drilled so you can fit it on the motorcycle of your choice. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black, brushed and ready...

-15%

Parts

Universal Medium front mudguard

€96.90 €114.00

Time left

Universal Medium front mudguard, manufactured out of stainless steel. It's short but it's still long enough to protect you from the front wheel splashes. It's not pre-drilled so you can fit it on any model of motorcycle. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black, brushed...

-15%

Parts

Universal Mini front mudguard

€96.90 €114.00

Time left

Universal Mini front mudguard, manufactured out of stainless steel. This front fender is very short, it enables you visually lighten the front of your motorcycle. It's not pre-drilled so you can fit it on any model of motorcycle. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black,...

Parts

Flat Track handlebars Ø22mm

€90.00

Flat Track handlebar ø22mm manufactured out of steel, it enables you to get a more comfortable driving position and a better look. This handlebar has much pullback to the rider, and his flat Track look will make your bike handle better. Available in Ø22mm diameter only, and in Chromed or Brushed finish.

-15%

Parts

Leather cable guides

€6.80 €8.00

Time left

Leather cable guide. This strap enables you fasten your cables, or tie it together to your handlebars. If just like us, your motorcycle's finish is part of your obsessions, this cable guide is perfect for your project. Available in Aged brown, Black and Gold leather. Available in 80mm, 90mm, 115mm or 130mm length. Each strap is 20mm wide. Sold as a...

Parts

Mini 21W turn indicators

€19.00

Mini 21W turn indicators manufactured out of plastic, with 21W bulb and M10 fixation threading. These turn indicators offer a very good finish level. Sold in pairs. EU approved for road use.

-15%

Parts

Round mirror ø8 steel for motorcycle

€33.15 €39.00

Time left

Mini round mirror, Ø8cm diameter with M8 threading, for upper position. The mirror shaft is 13cm long, its shape was specifically designed to guaranty a good rear visibility and a discreet look. Suitable for motorcycles with M10 screwing original mirrors fixation. Sold by unit, available in satin black only. Fit both left and right sides.

Universal Classic headlight / integrated speedometer

Parts

Universal Classic headlight / integrated speedometer

€678.00

Universal Classic headlight with integrated speedometer. The metal casing lighthouse is Ø180mm diameter with M8 side fixation. The aluminum Chronoclassic speedometer is manufactured in Germany by Motogadget. It's easy to setup according to the diameter of your wheel. The headlight and speedo are EU approved for road use. BAAK EXCLUSIVITY Contact the...

Parts

Bates headlight

€75.00

Bates headlight for motorcycle. This low fixation Bates style headlight is ø15cm diameter. It has a metal casing and trim ring. It's discreet and enables you get a better finish level on your motorcycle. It's available in Chromed, Satin Black or with Black casing and Brushed or Chromed trim ring. It comes with the fixation bracket designed for the model...

Parts

Biltwell Renegade handlebars grips

€22.00

Biltwell Renegade handlebar grips, produced by Biltwell for character motorcycle. It offers a better handtaking of your handlebar, a great riding comfort and an incredible look. Handlebar diameter 1" (ø25,4mm) or ø22mm. Comes in pairs. Available in Black only.

Parts

Heritage headlight

€99.00

Classic headlight for motorcycle. This M8 side fixation headlight has a ø180mm diameter. The casing and trim ring are metal, the window is plastic. It offers a great finish level, it's reduced casing (only 135mm deep) will offer a more compact look to your motorcycle. It's available with a Chromed or Brushed trim ring. Depending on the motorcycle model...