Bullet / Classic (2008- ..)

Showing 1-24 of 32 item(s)

Parts

Mini LED turn signal mo.blaze Pin

Motogadget LED mini indicator 3W minimalist design in aluminum with Ø8mm stem. When off, the indicators are almost invisible, yet they offer ideal brightness when in use. We use them on most of our custom builds. Each indicator is crimped in our workshop with Japanese terminals to simplify installation on your motorcycle. Indicator dimensions: 19.5mm x...

View

Classic ø10 round motorcycle mirror in aluminum, long stem

Parts

Classic ø10 round motorcycle mirror in aluminum, long stem

$79.20

The Classic HIGHSIDER MONTANA XL round motorcycle mirror combines elegance and functionality with its timeless design. Its black anodized finish, combined with an extended 25 mm stem, offers enhanced rear visibility. Designed to improve ergonomics and guarantee a minimalist look, it's perfect for vintage and custom motorcycles. Sold individually.

Bullet-type LED motorcycle turn indicators in black aluminum/brushed finish

Parts

Bullet-type LED motorcycle turn indicators in black aluminum/brushed finish

$93.60

Bullet-type motorcycle LED 10W turn signals in black aluminum with brushed trim combine elegance and efficiency. Featuring clear glass, they measure 20 mm in diameter and 36.5 mm in length. Mounting is simple, thanks to an M8mm screw fastener, and they are compatible with a 12 V system. Supplied sheathed and with ø3.2mm Japanese round crimped lugs....

View

Parts

Turn indicators / Brake light

$187.20

These minimalism aluminum turn signals keep your motorcycle clean. The rear indicators incorporate stop lights and lights. The front indicators are classic. Light is powerful. Stem øM8, 38mm long, ø22mm optical. CE-approved

View

Universal

Universal handlebars controls kit

$237.60

This Universal handlebars controls kit is essential to clear your cockpit. Each part of the kit must be purchased separately : Brake master cylinder Throttle Clutch lever This kit designed by our craftsmen shows a perfect finish level thanks to his assembly quality and satin black powder coat painting. These parts are available for classic and vintage...

View

Leather dye, perfect for motorcycle seats

Leather dye, perfect for motorcycle seats 2

Parts

Leather dye cream

$28.80

This leather dye cream is a maintenance solution. It penetrates the leather and gives it a deep black tint. You can use it for your saddles but also for any other leather product: shoes, jackets, gloves, saddlebags, etc. Capacity: 200 ml. It's available for Black, Gold, Brown and Ruby (red) leather.Should be applied with a cloth, mixed with our...

View

Rear turn indicators brackets for Royal Enfield by BAAK

-40%

Royal Enfield

Rear turn indicators brackets for Royal Enfield

$21.60 $36.00

Rear turn indicators holders for Royal Enfield. This pair of aluminium brackets will let you mount your turn indicators on the upper shock absorbers axles so it remains discreet. It's satin black high quality powder-coated so it resists over the years. Make sure to select the right model of motorcycle so you receive the holders that are suitable for your...

View

Leather handlebar pad for motorcycle (black, brown, red, gold)

Parts

Leather handlebar pad

$90.00

Leather-covered handlebar pad. Appart from the protection brought by this pad in case of shock with your handlebar, his leather cover will bring a classic off road look to your motorcycle. Our craftsmen re-interpreted the codes of off road bar pads to give it an aesthetic use. The inner diameter for the crossbar is ø12mm, the external diameter of the pad...

View

Parts

License plate lightning

$21.60

LED license plate lightning. This LED license plate lightning is approved according to the ECE European standards (12V / 2W). We use it on some license plate holders manufactured at BAAK's. Measurement of the license plate lightning : Length 17mm Diameter 12mm øM8 fixation shaft.

Aluminium turn indicators holders for license plate

Aluminium turn indicators holders for license plate 2

-40%

Parts

Turn indicators holders on license plate

$21.60 $36.00

These aluminium turn indicators holders are designed to be assembled on a BAAK license plate holder, on the motorcycle of your choice. It's available in 3 different versions : For turn indicators with øM8 shafts For turn indicators with øM10 shafts For original / accessory Triumph turn indicators (2016-...) It comes with the necessary stainless steel...

View

Mini speedometer for Royal Enfield Classic / Bullet 500 (Euro IV)

Mini speedometer for Royal Enfield Classic / Bullet 500 (Euro IV) 2

Bullet / Classic (2008- ..)

Motogadget Tiny speedometer for Royal Enfield Classic / Bullet 500 (Euro III and IV)

$537.60

Motogadget Tiny speedometer for Royal Enfield Classic and Bullet 500 Euro III and IV (2008-...). This plug & play speedometer solution is ideal to simplify the cockpit of your Royal Enfield while keeping the functionalities of your original speedometer. The speedometer is delivered pre-wired, with its wiring harness and a satin black aluminum mounting...

View

Extension for Classic ø10 round motorcycle mirror in aluminium

Parts

Extension for Classic ø10 round motorcycle mirror in aluminium

$26.40

Shaft extension for Classic round mirror. This extension is suitable only for our Classic round mirror. This part enables you make the mirror shaft longer for a better rear view, and makes it easier to adjust. This extension is 55mm long (35mm between holes). Supplied per unit.

License plate holder for Royal Enfield Classic / Bullet original mudguard

License plate holder for Royal Enfield Classic / Bullet original mudguard 2

-30%

Bullet / Classic (2008- ..)

License plate holder for Royal Enfield Classic / Bullet original mudguard

$141.12 $201.60

Discreet license plate holder for Royal Enfield Classic / Bullet 500 original mudguard. It's equipped with a ø70mm EU approved taillight with integrated license plate lightning, a plug & play wiring harness, turn indicators brackets on choice and optional turn indicators. This part comes in place of your original taillight / license plate holder unit....

View

Side license plate holder for Royal Enfield Classic / Bullet

Side license plate holder for Royal Enfield Classic / Bullet 2

-30%

Bullet / Classic (2008- ..)

Side license plate holder for Royal Enfield Classic / Bullet

$141.12 $201.60

Side license plate holder for Royal Enfield Bullet and Classic 500. It comes with its taillight and integrated license plate lightning, and gets assembled on the upper left shock absorber axle to visually lighten the tail of your bike. This holder comes with a plug & play wiring harness so you can assemble it easily on your Royal Enfield.

Leather seat for Royal Enfield Classic 500

Bullet / Classic (2008- ..)

Leather seat for Royal Enfield Classic 500

$637.92

Leather seat for Royal Enfield Classic 500. It keeps the comfort and shape of your original seat, with an additional touch of chic leather. This seat is handcrafted by our craftsmen at our workshop in France, based on an original Royal Enfield seat pan so it remains perfectly compatible with your motorcycle. It's available in aged brown, gold, and...

View

Classic ø10 round aluminum motorcycle mirror

Parts

Classic ø10 round aluminum motorcycle mirror

$76.80

Classic round motorcycle mirror. This black mirror, Ø10cm / diameter, has an impeccable yet discreet finish. It offers perfect rearward visibility and fits any motorcycle. Height-adjustable thanks to 150mm articulated rod. Supplied with two adapters (left-hand and right-hand M10x1.25 mm). Additional adapters are available as options. Approved to European...

View

Parts

Resistors for LED turn indicators

$18.00

Resistors for LED motorcycles turn indicators, essential to get a correct blinking speed once your LED blinkers are mounted on a motorcycle that isn't equipped with LED ones in stock configuration. Comes in pairs. You need two pairs to connect both front and rear turn signals on your motorcycle.

Parts

Headlight bulb wiring extension

$22.80

This headlight wiring harness bulb extension suits any motorcycle equipped with a H4 lighthouse bulb. It enables to connect your headlight to the motorcycle when you relocate the original wiring harness. Length : 420mm This headlight bulb extension is manufactured by ourselves at BAAK Motocyclettes workshop. It comes by default with all our headlight for...

Parts

Leather covered handlebar grips

$174.00

Leather covered handlebars grips. Wrapped with a high quality leather, it gives a touch of chic to your motorcycle while keeping a good takeover. Available in aged brown, gold, black and ruby leather. Four thread stitchings colors available so it perfectly fits your bike. Available for ø25,4mm (1 inch) handlebars.

View

Parts

Biltwell Thruster handlebars grips

$26.40

Biltwell Thruster handlebar grips, manufactured by Biltwell for character motorcycle. It offers a better handtaking of your handlebar, a great riding comfort and an incredible look. Handlebar diameter 1" (ø25,4mm) or ø22mm. Comes in pairs. Available in Black and Brown color.

View

Parts

Biltwell Renegade handlebars grips

$26.40

Biltwell Renegade handlebar grips, produced by Biltwell for character motorcycle. It offers a better handtaking of your handlebar, a great riding comfort and an incredible look. Handlebar diameter 1" (ø25,4mm) or ø22mm. Comes in pairs. Available in Black only.

View

-15%

Parts

Round mirror ø8 steel for motorcycle

$39.78 $46.80

Mini round mirror, Ø8cm diameter with M8 threading, for upper position. The mirror shaft is 13cm long, its shape was specifically designed to guaranty a good rear visibility and a discreet look. Suitable for motorcycles with M10 screwing original mirrors fixation. Sold by unit, available in satin black only. Fit both left and right sides.

View

-40%

Parts

Leather cable guides

$5.76 $9.60

Leather cable guide. This strap enables you fasten your cables, or tie it together to your handlebars. If just like us, your motorcycle's finish is part of your obsessions, this cable guide is perfect for your project. Available in Aged brown, Black and Gold leather. Available in 80mm, 90mm, 115mm or 130mm length. Each strap is 20mm wide. Sold as a...

View

Parts

Flat Track handlebars Ø22mm

$108.00

Flat Track handlebar ø22mm manufactured out of steel, it enables you to get a more comfortable driving position and a better look. This handlebar has much pullback to the rider, and his flat Track look will make your bike handle better. Available in Ø22mm diameter only, and in Chromed or Brushed finish.

View