Bullet / Classic (2008- ..)

Showing 1-20 of 20 item(s)

Leather Conditioner

Leather Conditioner 2

-15%

Parts

Leather Conditioner

€15.30 €18.00

This leather conditioner is a nourishing milk. It penetrates and nourishes the leather. You can use it for your saddles but also for your other leather products : shoes, jackets, gloves, saddlebags, etc. It comes with all the seat we offer. Capacity : 100 ml.

Aluminium Trial front mudguard for Royal Enfield Classic / Bullet

Aluminium Trial front mudguard for Royal Enfield Classic / Bullet 2

Royal Enfield

Aluminium Trial front mudguard for Royal Enfield Classic / Bullet

Scrambler front mudguard for Royal Enfield Bullet and Classic 500. Less enveloping than the original one, it will give a great trial / off road look to your motorcycle. It's perfect to visually lighten the front of your Royal Enfield equipped with a 21 inch front wheel. It's available in polished raw aluminium or brushed. Comes with its stainless steel...

Leather gas tank strap for Royal Enfield

Leather gas tank strap for Royal Enfield 2

-35%

Royal Enfield

Leather gas tank strap for Royal Enfield

€87.75 €135.00

Leather gas tank strap / belt for Royal Enfield Bullet and Classic 500 (Euro IV and pre-Euro IV), Continental GT 535 and Interceptor / Continental GT 650. It gives a distinguished classic look to your motorcycle and protects your gas tank from scratches. The hole around the gas tank cap will be different depending on the model of motorcycle you choose....

Side license plate holder for Royal Enfield Classic / Bullet

Side license plate holder for Royal Enfield Classic / Bullet 2

-30%

Bullet / Classic (2008- ..)

Side license plate holder for Royal Enfield Classic / Bullet

€117.60 €168.00

Side license plate holder for Royal Enfield Bullet and Classic 500. It comes with its taillight and integrated license plate lightning, and gets assembled on the upper left shock absorber axle to visually lighten the tail of your bike. This holder comes with a plug & play wiring harness so you can assemble it easily on your Royal Enfield.

License plate holder for Royal Enfield Classic / Bullet original mudguard

License plate holder for Royal Enfield Classic / Bullet original mudguard 2

-30%

Bullet / Classic (2008- ..)

License plate holder for Royal Enfield Classic / Bullet original mudguard

€117.60 €168.00

Discreet license plate holder for Royal Enfield Classic / Bullet 500 original mudguard. It's equipped with a ø70mm EU approved taillight with integrated license plate lightning, a plug & play wiring harness, turn indicators brackets on choice and optional turn indicators. This part comes in place of your original taillight / license plate holder unit....

2Win shock absorbers for Royal Enfield Bullet and Classic 500

2Win shock absorbers for Royal Enfield Bullet and Classic 500 2

Bullet / Classic (2008- ..)

2Win shock absorbers for Royal Enfield Bullet / Classic

2Win aluminium shock absorbers for Royal Enfield Bullet 500 / Classic 500 EFI (including Euro IV standards ones). These shocks are adjustable in spring preload and hydraulic. Each click of the knob changes the setting of hydraulic compression and relaxation simultaneous manner, it's very easy to use even while riding. These shock absorbers manufactured by...

Electric saddlebag for Royal Enfield Classic / Bullet

Electric saddlebag for Royal Enfield Classic / Bullet 2

Parts

Electric saddlebag for Royal Enfield Classic / Bullet

Leather electric saddlebag for Royal Enfield Classic / Bullet 500 EFI (2008-...). Assembled on the Left side, this leather bag comes in place of the original fuse box and lets you relocate the fuse and electric wiring harness inside the bag the elegant way. Assembled on the Right side, it's turned into a storage space, it comes in place of the original...

Leather dye, perfect for motorcycle seats

Leather dye, perfect for motorcycle seats 2

Parts

Leather dye cream

This leather dye cream is a maintenance solution. It penetrates the leather and gives it a deep black tint. You can use it for your saddles but also for any other leather product: shoes, jackets, gloves, saddlebags, etc. Capacity: 200 ml. It's available for Black, Gold, Brown and Ruby (red) leather.Should be applied with a cloth, mixed with our...

Thermal wrap

Thermal wrap 2

Parts

Exhaust wrap

Here are 15 meters (or 49') of exhaust wrap, 5 cm wide (1'' & 31/32), to wrap up your exhaust system and get the BAD BOY look you're aiming at! For the black color thermal wrap, we highly recommend you to paint it with an high temperature paint so the color can resist over the months. Available in Black or Beige color. This is high quality part,...

Stainless steel collars for exhaust wrap

Stainless steel collars for exhaust wrap 2

Parts

Stainless steel collars for exhaust wrap

This batch of 8 self-fruits in stainless steel will allow you to correctly attach the thermal strip to your exhaust. Don't tell us that you just go to do this with twisted thread. delivered by 8 units.

Leather cable guides

Leather cable guides 2

-40%

Parts

Leather cable guides

€4.80 €8.00

Leather cable guide. This strap enables you fasten your cables, or tie it together to your handlebars. If just like us, your motorcycle's finish is part of your obsessions, this cable guide is perfect for your project. Available in Aged brown, Black and Gold leather. Available in 80mm, 90mm, 115mm or 130mm length. Each strap is 20mm wide. Sold as a...

Leather covered handlebar grips

Leather covered handlebar grips 2

Parts

Leather covered handlebar grips

Leather covered handlebars grips. Wrapped with a high quality leather, it gives a touch of chic to your motorcycle while keeping a good takeover. Available in aged brown, gold, black and ruby leather. Four thread stitchings colors available so it perfectly fits your bike. Available for ø25,4mm (1 inch) handlebars.

Universal Mini side leather saddlebag

Universal Mini side leather saddlebag 2

Parts

Universal Mini side leather saddlebag

Universal Medium leather side saddlebag for motorcycle. Handcrafted at our workshop, it enables you to bring some stuff while you ride, and gives a great vintage look to your motorcycle. It's available in aged brown, gold, black or chocolat leather color. It's particularly suitable to be put on the original battery cover of a Royal Enfield Classic /...

Leather handlebar pad for motorcycle (black, brown, red, gold)

Leather handlebar pad for motorcycle (black, brown, red, gold) 2

Parts

Leather handlebar pad

Leather-covered handlebar pad. Appart from the protection brought by this pad in case of shock with your handlebar, his leather cover will bring a classic off road look to your motorcycle. Our craftsmen re-interpreted the codes of off road bar pads to give it an aesthetic use. The inner diameter for the crossbar is ø12mm, the external diameter of the pad...

License plate holder for US format side license plates

License plate holder for US format side license plates 2

-35%

Parts

License plate holder for US format side license plates

€29.25 €45.00

This license plate holder is suitable for US size license plates (vertical) mounted in side position. It's manufactured out of 3mm thick aluminium and it's satin black powder coat painted. This part is only suitable for BAAK side license plate holders.

Système anti-vibration Bullet 500

Système anti-vibration Bullet 500 2

-40%

Home

Système anti-vibration Bullet 500

€64.92 €108.19

Bullet 500 anti-vibration system: this crankshaft plate, located behind the ignition flywheel, reduces engine vibrations by 50%.

Handlebar controls kit by BAAK

Handlebar controls kit by BAAK 2

-15%

Universal

Universal handlebars controls kit

€168.30 €198.00

This Universal handlebars controls kit is essential to clear your cockpit. Each part of the kit must be purchased separately : Brake master cylinder Throttle Clutch lever This kit designed by our craftsmen shows a perfect finish level thanks to his assembly quality and satin black powder coat painting. These parts are available for classic and vintage...

License plate holder for US format with light mount

License plate holder for US format with light mount 2

-35%

Parts

License plate holder for US format with light mount

€29.25 €45.00

This license plate holder is suitable for US size license plates (horizontal). It's manufactured out of 3mm thick aluminium and it's satin black powder coat painted. This support allows you to mount a license plate light. This part is only suitable for BAAK license plate holders.

Large Leather Roll Top Pannier

Large Leather Roll Top Pannier 2

-15%

Parts

Large Leather Roll Top Pannier

€762.45 €897.00

Large Leather Roll Top pannier, carefully handcrafted by our leather worker for people who need pannier on their motorcycle but appreciate fine material and craftsmanship. The Rolled Top pannier is compatible with all SW-Motech SLC side carriers. (side carrier not supplied). Very detailed, this beautiful leather bag is made with BAAK leathers and suede...

Large Leather Messenger Bag

Large Leather Messenger Bag 2

-15%

Parts

Large Leather Messenger Bag

€762.45 €897.00

Discover our removable leather satchel, an exceptional piece meticulously handcrafted by our French artisans. Every detail is painstakingly executed, bearing witness to our commitment to quality. This exquisite leather goods creation is crafted from BAAK's top-quality vegetable-tanned leathers. Delivered with an adjustable and detachable strap, this...