Ninet urban g/s

Showing 1-43 of 43 item(s)

-15%

Parts

Leather Conditioner

€15.30 €18.00

This leather conditioner is a nourishing milk. It penetrates and nourishes the leather. You can use it for your saddles but also for your other leather products : shoes, jackets, gloves, saddlebags, etc. It comes with all the seat we offer. Capacity : 100 ml.

-20%

Bmw

Turn indicators holder cover for BMW NineT

€24.00 €30.00

Front turn indicators holder cover for BMW NineT. These black aluminium bracket covers are particularly useful to keep a clean finish if you replace the original front blinkers. Designed and manufactured in our Lyon workshop in aluminum and powder coated in black. Comes in pair with the necessary hardware for the assembly.

Parts

Turn indicators wiring harness for BMW NineT

€29.00

Turn indicators wiring harness for BMW R NineT. These connectors enable you to connect any universal 10W turn indicators to the original wiring harness of your BMW NineT without having to cut or solder any wire. Comes in pair. Total length: 360mm (14")

Classic Medium front mudguard for BMW NineT

Classic Medium front mudguard for BMW NineT 2

-20%

Bmw

Classic Medium front mudguard for BMW NineT

€228.00 €285.00

Classic Medium front mudguard for BMW NineT, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled, comes with its satin black powder coated fixation bracket suitable for the selected model and the stainless steel screws required. It's designed and manufactured by our team at the workshop in...

View

-35%

Bmw

Classic rear mudguard for BMW NineT

€243.75 €375.00

Classic rear mudguard for BMW R 1200 NineT manufactured out of stainless steel. It has an elegant raw look thanks to the molded edge at its end. You will still keep good protection against the rear wheel projections. Equipped with a LED taillight (CE approved for road use) with license plate lightning, a rear license plate holder, rear turn indicators...

View

Classic Mini front mudguard for BMW NineT

Classic Mini front mudguard for BMW NineT 2

-20%

Bmw

Classic Mini front mudguard for BMW NineT

€228.00 €285.00

Classic Mini front mudguard for BMW R 1200 NineT, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled, comes with its satin black powder coated fixation bracket suitable for the selected model and the stainless steel screws required. It's designed and manufactured by our team at the...

View

-20%

Bmw

Medium front mudguard for BMW NineT

€228.00 €285.00

Medium front mudguard for BMW R 1200 NineT, manufactured out of stainless steel. It's short but it's still long enough to protect you from the front wheel splashes. It's pre-drilled, comes with its satin black powder coated fixation bracket suitable for the selected model and the stainless steel screws required. It's designed and manufactured by our team...

View

-20%

Bmw

Mini front mudguard for BMW NineT

€228.00 €285.00

Mini front mudguard for BMW R 1200 NineT, manufactured out of stainless steel. This front fender is very short, it enables you visually lighten the front of your NineT. It's pre-drilled, comes with its satin black powder coated fixation bracket suitable for the selected model and the stainless steel screws required. It's designed and manufactured by our...

View

Scrambler front mudguard for BMW NineT 2

-20%

Bmw

Scrambler front mudguard for BMW NineT

€228.00 €285.00

High front fender for BMW R NineT 1200. This Scrambler look front mudguard is handcrafted out of stainless steel, and gets assembled on the lower triple trees of your BMW NineT thanks to the provided fixation bracket. It offers a good protection and a strong off road look to your motorcycle. Available in Glossy black, Satin black, Brushed and Polished...

View

Aluminium wheel arch for BMW R 1200 NineT by BAAK

Aluminium wheel arch for BMW R 1200 NineT by BAAK 2

-35%

Bmw

Aluminium wheel arch for BMW NineT

€81.25 €125.00

Aluminium wheel arch for BMW R 1200 NineT. This wheel arch enables you get a perfect finish result once your rear fender is removed. It's equipped with a LED taillight, it comes with its plug & play wiring harness for taillight, and its fixation kit. It's satin black powder coat painted so it can resist over the years. Suitable for BMW R NineT...

-30%

Bmw

Bates headlight plate for BMW NineT

€118.30 €169.00

Headlight plate for Bates headlight for BMW R NineT. This aluminium plate enables to hide the steering column and the cables after the assembly of a Bates headlight on your NineT. Handcrafted out of aluminium, it's available in Satin black or Raw aluminium finish. Compatible with a Bates headlight or the original headlight. The leather fixation collars...

View

Parts

Classic leather seat for BMW R NineT

€1,074.00

Classic leather seat for BMW R 1200 NineT. This seat is handcrafted at BAAK's workshop, based on an original BMW seat pan ensuring the compatibility with your NineT. It's a two-seater model. Available in Aged brown, Gold, Black genuine leather, it offers a chic touch to your motorcycle. Choose a classic, squares or diamonds quilting style on the top...

View

Parts

Heritage leather seat for BMW R NineT

€945.60

Heritage leather seat for BMW R 1200 NineT. This seat is handcrafted at BAAK's workshop, based on an original BMW seat pan ensuring the compatibility with your NineT. It's a two-seater model. Available in Aged brown, Gold, Black genuine leather. The suede leather applied on the front provide a very elegant contrast. Choose a classic, squares or diamonds...

View

Parts

Rear mudguard wiring harness for BMW NineT

€19.00

Rear fender wiring harness for BMW R NineT. This connector enables you connect any rear taillight (light / brake light) to the original wiring harness of your BMW NineT without having to cut or weld any wire. Sold individually. Total length: 160mm. This wiring harness initially comes with all our NineT rear mudguards.

Speedometer lowering kit for BMW NineT 2

-40%

Bmw

Speedometer lowering kit for BMW NineT

€13.20 €22.00

Lowering kit for BMW NineT speedometer. These 4 struts enable you lower your original NineT speedometer by 10mm, to get a clear riding post. Suitable for BMW NineT Pure, Scrambler, Racer and Urban GS.

-15%

Bmw

Air filters kit for BMW NineT

€236.64 €278.40

Air filters kit for BMW NineT. This kit includes two black air filters and a red oil breather. The air filters plug directly on the intake, in place of the original air intake pipes of your BMW NineT. No power or torque improvement with this kit, it's simply an aesthetic modification. We recommend you to go for our Aluminium battery box along with this...

Black adjustable shock absorber for BMW R 1200 NineT by BAAK

Black adjustable shock absorber for BMW R 1200 NineT by BAAK 2

Parts

Shock absorber for BMW NineT

€420.00

Big Body shock absorber for BMW R 1200 NineT 1200 (2017-...). This mono shock absorber is manufactured in France by our partner Shock Factory. It offers a finish level and look that can't be compared to the original one. It's easy to adjust thanks to one only synchronized knob which adjust both compression and relaxation (48 different levels of setting)...

Side leather saddlebag for BMW NineT by BAAK

Side leather saddlebag for BMW NineT by BAAK 2

Parts

Side leather saddlebag for BMW R NineT

€289.99

This side leather saddlebag for BMW R 1200 NineT comes in place of your original air intake. His manufacturing is based on an aluminium plate that guarantees a rigid fixing on the machine, wrapped with leather to create a result that is harmonious with your gas tank shape. This saddlebag is available in Aged brown, black, gold leather.

View

Leather dye, perfect for motorcycle seats

Leather dye, perfect for motorcycle seats 2

Parts

Leather dye cream

€24.00

This leather dye cream is a maintenance solution. It penetrates the leather and gives it a deep black tint. You can use it for your saddles but also for any other leather product: shoes, jackets, gloves, saddlebags, etc. Capacity: 200 ml. It's available for Black, Gold, Brown and Ruby (red) leather.Should be applied with a cloth, mixed with our...

View

Parts

Mirror adapter

€15.00

Handlebar adapters, required to mount some mirrors on your handlebar. We offer two different solutions : Adapter for ø22mm handlebars, to mount our mirrors in underbar position (M10 threading) Through rod type adapter, to mount a mirror on a through rod type fixation in classic or underbar position

View

Parts

H4 Yellow bulb

€12.00

Yellow H4 bulb for motorcycle lighthouse. This bulb adapts to any lighthouse equipped with an original H4 bulb. It allows you to provide the lighting of your machine with a resolutely vintage appearance, without affixing a filter on the window of your headlight. This product preserves the lighting qualities of your machine, to be favored with respect to...

Parts

Universal 1 button control

€200.00

Universal 1 push button handlebar control, manufactured out of machined aluminum and available for 22mm (7/8") or 25,4mm (1") diameter handlebar. The push buttons can be linked to any functions on the motorcycle. This part has a satin black powder coating, and is designed to be riveted to your handlebar. Diameter : 30mm (1 & 3/16") / Thickness : 17mm...

View

Parts

Left 3-buttons universal switch

€300.00

Universal handlebar controls, including :- an ON/OFF/ON turn signal switch- a push button for the horn- a push button for full headlights (may require adaptation of a relay) Available for 22mm (7/8") or 25,4mm (1") diameter handlebar. This part has a satin black powder coating, and is designed to be riveted to your handlebar.

View

-40%

Parts

Headlight struts

€13.20 €22.00

Motorcycle headlight struts, manufactured out of aluminum, to perfectly adjust the position of your headlight. The hole diameter is ø8mm, the exterior diameter is ø29mm. For Moto Guzzi V7 Classic or Heritage headlight, choose the 10mm ones. For Triumph and Royal Enfield Classic or Heritage headlight, choose the 5mm ones. Comes in pairs.

View

Parts

Tracker bar handlebars

€159.00

Tracker Bar handlebars, manufactured out of aluminium. This Tracker type handlebar has Ø28,6mm clamping diameter and Ø22mm controls diameter. It's 790mm wide. It offers much pullback to the rider which offers a comfortable riding position. It's available in satin black finish only.

View

-40%

Parts

Leather cable guides

€4.80 €8.00

Leather cable guide. This strap enables you fasten your cables, or tie it together to your handlebars. If just like us, your motorcycle's finish is part of your obsessions, this cable guide is perfect for your project. Available in Aged brown, Black and Gold leather. Available in 80mm, 90mm, 115mm or 130mm length. Each strap is 20mm wide. Sold as a...

View

-15%

Parts

Round mirror ø8 steel for motorcycle

€33.15 €39.00

Mini round mirror, Ø8cm diameter with M8 threading, for upper position. The mirror shaft is 13cm long, its shape was specifically designed to guaranty a good rear visibility and a discreet look. Suitable for motorcycles with M10 screwing original mirrors fixation. Sold by unit, available in satin black only. Fit both left and right sides.

View

-15%

Parts

Bates headlight

€63.75 €75.00

Bates headlight for motorcycle. This low fixation Bates style headlight is ø15cm diameter. It has a metal casing and trim ring. It's discreet and enables you get a better finish level on your motorcycle. It's available in Chromed, Satin Black or with Black casing and Brushed or Chromed trim ring. It comes with the fixation bracket designed for the model...

View

-15%

Parts

Headlight bulb wiring extension

€16.15 €19.00

This headlight wiring harness bulb extension suits any motorcycle equipped with a H4 lighthouse bulb. It enables to connect your headlight to the motorcycle when you relocate the original wiring harness. Length : 420mm This headlight bulb extension is manufactured by ourselves at BAAK Motocyclettes workshop. It comes by default with all our headlight for...

-15%

Parts

Resistors for LED turn indicators

€12.75 €15.00

Resistors for LED motorcycles turn indicators, essential to get a correct blinking speed once your LED blinkers are mounted on a motorcycle that isn't equipped with LED ones in stock configuration. Comes in pairs. You need two pairs to connect both front and rear turn signals on your motorcycle.

Classic ø10 round aluminum motorcycle mirror

Classic ø10 round aluminum motorcycle mirror 2

-15%

Parts

Classic ø10 round aluminum motorcycle mirror

€54.40 €64.00

Classic round motorcycle mirror. This black mirror, Ø10cm / diameter, has an impeccable yet discreet finish. It offers perfect rearward visibility and fits any motorcycle. Height-adjustable thanks to 150mm articulated rod. Supplied with two adapters (left-hand and right-hand M10x1.25 mm). Additional adapters are available as options. Approved to European...

View

-15%

Parts

Classic headlight

€76.50 €90.00

Round headlight for classic motorcycles, with M8 side mount and ø180mm diameter. It features metal casing and bezel, with plastic glass, offering an exceptional level of finish. Its streamlined casing gives it a resolutely classic look. Depending on the motorcycle model chosen, a plug and play harness is supplied (which may justify a price difference...

View

Extension for Classic ø10 round motorcycle mirror in aluminium

Extension for Classic ø10 round motorcycle mirror in aluminium 2

-15%

Parts

Extension for Classic ø10 round motorcycle mirror in aluminium

€18.70 €22.00

Shaft extension for Classic round mirror. This extension is suitable only for our Classic round mirror. This part enables you make the mirror shaft longer for a better rear view, and makes it easier to adjust. This extension is 55mm long (35mm between holes). Supplied per unit.

Aluminium turn indicators holders for license plate

Aluminium turn indicators holders for license plate 2

-40%

Parts

Turn indicators holders on license plate

€18.00 €30.00

These aluminium turn indicators holders are designed to be assembled on a BAAK license plate holder, on the motorcycle of your choice. It's available in 3 different versions : For turn indicators with øM8 shafts For turn indicators with øM10 shafts For original / accessory Triumph turn indicators (2016-...) It comes with the necessary stainless steel...

View

-15%

Parts

License plate lightning

€15.30 €18.00

LED license plate lightning. This LED license plate lightning is approved according to the ECE European standards (12V / 2W). We use it on some license plate holders manufactured at BAAK's. Measurement of the license plate lightning : Length 17mm Diameter 12mm øM8 fixation shaft.

Leather handlebar pad for motorcycle (black, brown, red, gold)

Parts

Leather handlebar pad

€75.00

Leather-covered handlebar pad. Appart from the protection brought by this pad in case of shock with your handlebar, his leather cover will bring a classic off road look to your motorcycle. Our craftsmen re-interpreted the codes of off road bar pads to give it an aesthetic use. The inner diameter for the crossbar is ø12mm, the external diameter of the pad...

View

BAAK black aluminium headlight brackets for motorcycles

BAAK black aluminium headlight brackets for motorcycles 2

-35%

Parts

Universal short headlight clamps for classic motorcycles

€83.85 €129.00

Headlight bracket for motorcycles, for M8 side headlight fixation, with optional front turn indicators holders. Designed and manufactured at BAAK's in France. Perfect to put a BAAK headlight on your motorcycle and improve its finish level. Ø39 - 40mm for Moto Guzzi V7I / V7 II / V7 III / V7 850 / V9 (60mm size) Ø41 - 42mm for Triumph Bonneville T100 / SE...

View

Double optics headlight plate for motorcycles - BAAK

Double optics headlight plate for motorcycles - BAAK 2

Parts

Universal Trail headlight plate

€465.00

Our universal double optics headlight plate takes its inspiration from the 80's Trail universe. Perfect for a Scrambler project, this headlight plate is designed by our team and manufactured out of glass fiber. It includes a wiring harness extension and aluminium fixation brackets supposed to be assembled on the fork tubes (ø39 - ø40mm / ø41 - ø42mm /...

View

Parts

Turn indicators / Brake light

€156.00

These minimalism aluminum turn signals keep your motorcycle clean. The rear indicators incorporate stop lights and lights. The front indicators are classic. Light is powerful. Stem øM8, 38mm long, ø22mm optical.

View

Round handlebar mirror ø10 HIGHSIDER MONTANA-SLIM EVO SHORT

Round handlebar mirror ø10 HIGHSIDER MONTANA-SLIM EVO SHORT 2

Parts

Round Bar End mirror ø10 HIGHSIDER MONTANA-SLIM EVO SHORT

€84.00

Looking for a discreet, high-performance mirror? The HIGHSIDER MONTANA-SLIM EVO SHORT is for you. With a thickness of just 5 mm, a black anodized aluminum design and convex glass for optimum visibility, this mirror combines style and safety. Easy to install on handlebars from 12 to 22 mm, it complies with E standards for left- or right-hand use.

Bullet-type LED motorcycle turn indicators in black aluminum/brushed finish

Parts

Bullet-type LED motorcycle turn indicators in black aluminum/brushed finish

€78.00

Bullet-type motorcycle LED 10W turn signals in black aluminum with brushed trim combine elegance and efficiency. Featuring clear glass, they measure 20 mm in diameter and 36.5 mm in length. Mounting is simple, thanks to an M8mm screw fastener, and they are compatible with a 12 V system. Supplied sheathed and with ø3.2mm Japanese round crimped lugs....

View

Classic ø10 round motorcycle mirror in aluminum, long stem

Parts

Classic ø10 round motorcycle mirror in aluminum, long stem

€66.00

The Classic HIGHSIDER MONTANA XL round motorcycle mirror combines elegance and functionality with its timeless design. Its black anodized finish, combined with an extended 25 mm stem, offers enhanced rear visibility. Designed to improve ergonomics and guarantee a minimalist look, it's perfect for vintage and custom motorcycles. Sold individually.

motoscope chronoclassic 2 speedometer for BMW NineT 2017-2023

Parts

Motoscope chronoclassic 2 speedometer for BMW NineT 2017-2023

€570.00

Opt for the Chronoclassic 2 Motoscope speedometer by Motogadget for your BMW NineT (2017-2023) and transform your bike in just minutes. This fully wired 'plug and ride' kit is easy to install without any technical knowledge required! Compatible with R9T models (2014-2016) and Euro 4 (post-2017) models such as Urban G/S, Pure, and Scrambler. Installation...