Thruxton (2004-2016)

Showing 25-48 of 55 item(s)

Rectifier / turn indicators / horn bracket for Triumph (pre- 2016)

-30%

Triumph

Rectifier / turn indicators / horn bracket for Triumph (pre- 2016)

$39 $55

This bracket enables you to relocate your rectifier, front turn indicators and horn on a Triumph (pre-2016 - air-cooled) below your steering column. It visually lightens the line of the front of your motorcycle by grouping these parts on one bracket. This bracket is 21,8cm wide and 12cm high. It get assembled in the original place of your horn, under the...

Rectifier bracket for Triumph (pre- 2016)

-35%

Triumph

Rectifier bracket for Triumph (pre- 2016)

$22 $34

Rectifier relocation bracket for Triumph (pre-2016 - air-cooled). This bracket enables you to relocate the voltage rectifier, in place of the horn. Then the horn can be attached below, on the same bracket. It's manufactured out of aluminum laser cut. You may be obliged to move the original wiring harness under the gas tank. All the necessary screwing...

-20%

Triumph

Classic Mini front mudguard for Triumph

$98 $122

Classic Mini front mudguard for Triumph, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. We drill holes on this mudguard according to the model of Triumph you choose. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black, brushed and...

Triumph

Brembo brake pads for Triumph

$59

Brembo front brake pads for Triumph. Softer than the original ones, these front brake pads are manufactured out of high quality material that provides a perfect braking constancy, as much in cold or high temperature conditions. The friction coefficient is higher than on your original Triumph brake pads, which provide excellent braking performances and...

Parts

Mirror adapter

$17

Handlebar adapters, required to mount some mirrors on your handlebar. We offer two different solutions : Adapter for ø22mm handlebars, to mount our mirrors in underbar position (M10 threading) Through rod type adapter, to mount a mirror on a through rod type fixation in classic or underbar position

Parts

Exhaust wrap

$106

Here are 15 meters (or 49') of exhaust wrap, 5 cm wide (1'' & 31/32), to wrap up your exhaust system and get the BAD BOY look you're aiming at! For the black color thermal wrap, we highly recommend you to paint it with an high temperature paint so the color can resist over the months. Available in Black or Beige color. This is high quality part,...

-15%

Parts

Short fork spring blocks

$18 $21

Short fork spring blocks. To proportionally lower the front en of your Triumph or Moto Guzzi V7 when you fit our short shock absorbers, you will need these fork springs blocks. It's 2cm (25/32'') shorter and comes right in place of the original ones.

Stainless steel collars for exhaust wrap

Parts

Stainless steel collars for exhaust wrap

$27

This batch of 8 self-fruits in stainless steel will allow you to correctly attach the thermal strip to your exhaust. Don't tell us that you just go to do this with twisted thread. delivered by 8 units.

Parts

Universal 1 button control

$226

Universal 1 push button handlebar control, manufactured out of machined aluminum and available for 22mm (7/8") or 25,4mm (1") diameter handlebar. The push buttons can be linked to any functions on the motorcycle. This part has a satin black powder coating, and is designed to be riveted to your handlebar. Diameter : 30mm (1 & 3/16") / Thickness : 17mm...

Parts

Left 3-buttons universal switch

$339

Universal handlebar controls, including :- an ON/OFF/ON turn signal switch- a push button for the horn- a push button for full headlights (may require adaptation of a relay) Available for 22mm (7/8") or 25,4mm (1") diameter handlebar. This part has a satin black powder coating, and is designed to be riveted to your handlebar.

-20%

Parts

Flat Track handlebars Ø22mm

$81 $102

Flat Track handlebar ø22mm manufactured out of steel, it enables you to get a more comfortable driving position and a better look. This handlebar has much pullback to the rider, and his flat Track look will make your bike handle better. Available in Ø22mm diameter only, and in Chromed or Brushed finish.

-40%

Parts

Leather cable guides

$5 $9

Leather cable guide. This strap enables you fasten your cables, or tie it together to your handlebars. If just like us, your motorcycle's finish is part of your obsessions, this cable guide is perfect for your project. Available in Aged brown, Black and Gold leather. Available in 80mm, 90mm, 115mm or 130mm length. Each strap is 20mm wide. Sold as a...

Parts

Mini 21W turn indicators

$21

Mini 21W turn indicators manufactured out of plastic, with 21W bulb and M10 fixation threading. These turn indicators offer a very good finish level. Sold in pairs. EU approved for road use.

-15%

Parts

Round mirror ø8 steel for motorcycle

$38 $44

Mini round mirror, Ø8cm diameter with M8 threading, for upper position. The mirror shaft is 13cm long, its shape was specifically designed to guaranty a good rear visibility and a discreet look. Suitable for motorcycles with M10 screwing original mirrors fixation. Sold by unit, available in satin black only. Fit both left and right sides.

Parts

Biltwell Renegade handlebars grips

$25

Biltwell Renegade handlebar grips, produced by Biltwell for character motorcycle. It offers a better handtaking of your handlebar, a great riding comfort and an incredible look. Handlebar diameter 1" (ø25,4mm) or ø22mm. Comes in pairs. Available in Black only.

Parts

Biltwell Thruster handlebars grips

$25

Biltwell Thruster handlebar grips, manufactured by Biltwell for character motorcycle. It offers a better handtaking of your handlebar, a great riding comfort and an incredible look. Handlebar diameter 1" (ø25,4mm) or ø22mm. Comes in pairs. Available in Black and Brown color.

Parts

Leather covered handlebar grips

$164

Leather covered handlebars grips. Wrapped with a high quality leather, it gives a touch of chic to your motorcycle while keeping a good takeover. Available in aged brown, gold, black and ruby leather. Four thread stitchings colors available so it perfectly fits your bike. Available for ø25,4mm (1 inch) handlebars.

Aluminium handlebar grips for motocycles classic, vintage, cafe racer

Aluminium handlebar grips for motocycles classic, vintage, cafe racer 2

-40%

Parts

Motorcycle handlebar mounts, aluminum

$65 $109

Machined aluminium handlebar clamps for motorcycle. These risers are available in ø22mm diameter, ø28,6mm diameter or 1 inch (ø25,4mm) diameter, it's lighter and elegant. The clamps are satin black powder coat painted, and come with stainless steel screwing (size on the choice). Designed and manufactured at BAAK's workshop. Made in France

Classic ø10 round aluminum motorcycle mirror

Classic ø10 round aluminum motorcycle mirror 2

-15%

Parts

Classic ø10 round aluminum motorcycle mirror

$62 $72

Classic round motorcycle mirror. This black mirror, Ø10cm / diameter, has an impeccable yet discreet finish. It offers perfect rearward visibility and fits any motorcycle. Height-adjustable thanks to 150mm articulated rod. Supplied with two adapters (left-hand and right-hand M10x1.25 mm). Additional adapters are available as options. Approved to European...

Motorcycle mirror under handlebars round ø8 in steel

Motorcycle mirror under handlebars round ø8 in steel 2

-15%

Parts

Motorcycle mirror under handlebars round ø8 in steel

$43 $51

Mini black Ø80mm bike mirror especially designed to be mounted below the handlebar in lower position. It offers a very discreet look and a good rear visibility with its wide angle glass. Available without adapter (for Ø8mm through shaft mounting or with adapter for ø22mm handlebars). Sold individually. Fit both left and right sides, available in satin...

Parts

Leather fork gaiters

$272

Pair of genuine leather fork gaiters. These 4, 5, 6 or 8 folds fork boots are handcrafted in France, and bring a touch of authenticity and exception to your motorcycle. It's water-repellent and especially designed to resist to an intensive use. Available in Aged brown, black, gold leather color. Diameter Ø41mm top and Ø63mm bottom. It comes in pairs with...

Extension for Classic ø10 round motorcycle mirror in aluminium

Extension for Classic ø10 round motorcycle mirror in aluminium 2

-15%

Parts

Extension for Classic ø10 round motorcycle mirror in aluminium

$21 $25

Shaft extension for Classic round mirror. This extension is suitable only for our Classic round mirror. This part enables you make the mirror shaft longer for a better rear view, and makes it easier to adjust. This extension is 55mm long (35mm between holes). Supplied per unit.

Leather handlebar pad for motorcycle (black, brown, red, gold)

Parts

Leather handlebar pad

$85

Leather-covered handlebar pad. Appart from the protection brought by this pad in case of shock with your handlebar, his leather cover will bring a classic off road look to your motorcycle. Our craftsmen re-interpreted the codes of off road bar pads to give it an aesthetic use. The inner diameter for the crossbar is ø12mm, the external diameter of the pad...

License plate holder for US format side license plates

License plate holder for US format side license plates 2

-35%

Parts

License plate holder for US format side license plates

$33 $51

This license plate holder is suitable for US size license plates (vertical) mounted in side position. It's manufactured out of 3mm thick aluminium and it's satin black powder coat painted. This part is only suitable for BAAK side license plate holders.