Bonneville (2000-2016)

Showing 1-24 of 50 item(s)

Large Leather Messenger Bag

Large Leather Messenger Bag 2

-15%
New

Parts

Large Leather Messenger Bag

€762.45 €897.00

Discover our removable leather satchel, an exceptional piece meticulously handcrafted by our French artisans. Every detail is painstakingly executed, bearing witness to our commitment to quality. This exquisite leather goods creation is crafted from BAAK's top-quality vegetable-tanned leathers. Delivered with an adjustable and detachable strap, this...

View

41mm Fork Tube Clamp Universal

41mm Fork Tube Clamp Universal 2

-35%

Parts

41mm Fork Tube Clamp Universal

€29.25 €45.00

This aluminum bracket attaches to your original fork tube, allowing you to mount accessories such as a speedometer, GPS, switch, etc. Compatible with all 41mm forks. M8 thread.

Rear Brake Caliper Guard for Triumph

Rear Brake Caliper Guard for Triumph 2

-30%

Triumph

Rear Brake Caliper Guard for Triumph

€25.20 €36.00

Protect your rear brake caliper with this stainless steel guard, specially designed for Triumph motorcycles. Since the rear caliper of your Triumph is located below the wheel axle, it is naturally exposed to stone impacts during off-road riding and curbs in urban settings. This caliper guard has been specifically designed to cover the caliper and...

View

Bouchon plat de réservoir pour triumph

Bouchon plat de réservoir pour triumph 2

-30%

Parts

Flat fuel tank cap for Triumph

€40.60 €58.00

Black finish only, without locking system. Made with a black anodized treatment for long-lasting durability and impeccable style. This product was carefully selected by the BAAK workshop team for its elegant look and superior quality. It is easily installed as a direct replacement for the original cap.

Large Leather Roll Top Pannier

Large Leather Roll Top Pannier 2

-15%

Parts

Large Leather Roll Top Pannier

€762.45 €897.00

Large Leather Roll Top pannier, carefully handcrafted by our leather worker for people who need pannier on their motorcycle but appreciate fine material and craftsmanship. The Rolled Top pannier is compatible with all SW-Motech SLC side carriers. (side carrier not supplied). Very detailed, this beautiful leather bag is made with BAAK leathers and suede...

View

License plate holder for US format with light mount

License plate holder for US format with light mount 2

-35%

Parts

License plate holder for US format with light mount

€29.25 €45.00

This license plate holder is suitable for US size license plates (horizontal). It's manufactured out of 3mm thick aluminium and it's satin black powder coat painted. This support allows you to mount a license plate light. This part is only suitable for BAAK license plate holders.

License plate holder for US format side license plates

License plate holder for US format side license plates 2

-35%

Parts

License plate holder for US format side license plates

€29.25 €45.00

This license plate holder is suitable for US size license plates (vertical) mounted in side position. It's manufactured out of 3mm thick aluminium and it's satin black powder coat painted. This part is only suitable for BAAK side license plate holders.

Handlebar controls kit by BAAK

Handlebar controls kit by BAAK 2

-15%

Universal

Universal handlebars controls kit

€168.30 €198.00

This Universal handlebars controls kit is essential to clear your cockpit. Each part of the kit must be purchased separately : Brake master cylinder Throttle Clutch lever This kit designed by our craftsmen shows a perfect finish level thanks to his assembly quality and satin black powder coat painting. These parts are available for classic and vintage...

View

Classic Mini front mudguard for Triumph

Classic Mini front mudguard for Triumph 2

-20%

Triumph

Classic Mini front mudguard for Triumph

€86.40 €108.00

Classic Mini front mudguard for Triumph, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. We drill holes on this mudguard according to the model of Triumph you choose. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black, brushed and...

View

BAAK black aluminium headlight brackets for motorcycles

BAAK black aluminium headlight brackets for motorcycles 2

-35%

Parts

Universal short headlight clamps for classic motorcycles

€83.85 €129.00

Headlight bracket for motorcycles, for M8 side headlight fixation, with optional front turn indicators holders. Designed and manufactured at BAAK's in France. Perfect to put a BAAK headlight on your motorcycle and improve its finish level. Ø39 - 40mm for Moto Guzzi V7I / V7 II / V7 III / V7 850 / V9 (60mm size) Ø41 - 42mm for Triumph Bonneville T100 / SE...

View

BAAK License plate lightning

BAAK License plate lightning 2

-15%

Parts

License plate lightning

€15.30 €18.00

LED license plate lightning. This LED license plate lightning is approved according to the ECE European standards (12V / 2W). We use it on some license plate holders manufactured at BAAK's. Measurement of the license plate lightning : Length 17mm Diameter 12mm øM8 fixation shaft.

Aluminium turn indicators holders for license plate

Aluminium turn indicators holders for license plate 2

-40%

Parts

Turn indicators holders on license plate

€18.00 €30.00

These aluminium turn indicators holders are designed to be assembled on a BAAK license plate holder, on the motorcycle of your choice. It's available in 3 different versions : For turn indicators with øM8 shafts For turn indicators with øM10 shafts For original / accessory Triumph turn indicators (2016-...) It comes with the necessary stainless steel...

View

Extension for Classic ø10 round motorcycle mirror in aluminium

Extension for Classic ø10 round motorcycle mirror in aluminium 2

-15%

Parts

Extension for Classic ø10 round motorcycle mirror in aluminium

€18.70 €22.00

Shaft extension for Classic round mirror. This extension is suitable only for our Classic round mirror. This part enables you make the mirror shaft longer for a better rear view, and makes it easier to adjust. This extension is 55mm long (35mm between holes). Supplied per unit.

Rectifier bracket for Triumph (pre- 2016)

Rectifier bracket for Triumph (pre- 2016) 2

-35%

Triumph

Rectifier bracket for Triumph (pre- 2016)

€19.50 €30.00

Rectifier relocation bracket for Triumph (pre-2016 - air-cooled). This bracket enables you to relocate the voltage rectifier, in place of the horn. Then the horn can be attached below, on the same bracket. It's manufactured out of aluminum laser cut. You may be obliged to move the original wiring harness under the gas tank. All the necessary screwing...

Rectifier / turn indicators / horn bracket for Triumph (pre- 2016)

Rectifier / turn indicators / horn bracket for Triumph (pre- 2016) 2

-30%

Triumph

Rectifier / turn indicators / horn bracket for Triumph (pre- 2016)

€34.30 €49.00

This bracket enables you to relocate your rectifier, front turn indicators and horn on a Triumph (pre-2016 - air-cooled) below your steering column. It visually lightens the line of the front of your motorcycle by grouping these parts on one bracket. This bracket is 21,8cm wide and 12cm high. It get assembled in the original place of your horn, under the...

License plate holder for Triumph original mudguard (pre- 2016)

License plate holder for Triumph original mudguard (pre- 2016) 2

-30%

Triumph

License plate holder for Triumph original mudguard (pre- 2016)

€117.60 €168.00

License plate holder for Triumph original mudguard (pre-2016 - air-cooled). This license plate support includes a taillight (EU approved), an integrated license plate lightning, a plug & play wiring harness, turn indicators fixation bracket on choice and optional turn indicators. Designed and manufactured at our workshop in France.

View

Side license plate holder for Triumph

Side license plate holder for Triumph 2

-30%

Triumph

Side license plate holder for Triumph

€66.50 €95.00

Side license plate support / holder for Triumph. It attaches to the upper axis of the left shock absorber. It comes with a connection wiring harness that makes it 100% plug and play. Satin black powder coat painting finish. If you choose the optional turn indicators, we'll provide the potential resistors necessary for their proper functioning according...

View

Bates headlight bracket

Bates headlight bracket 2

-35%

Parts

Bates headlight bracket

€19.50 €30.00

Fixation bracket for Bates headlight, required to assemble a headlight with a lower position fixation on your motorcycle. Manufactured out of aluminium, 4mm thick, black powder coat painted. Ø6mm between axes holes, adjustable from 68mm to 95mm Ø10mm headlight fixing holes

Relocated ignition switch control bracket kit for Triumph (pre- 2016)

Relocated ignition switch control bracket kit for Triumph (pre- 2016) 2

-35%

Triumph

Relocated ignition switch control bracket kit for Triumph (pre- 2016)

€31.85 €49.00

Relocated ignition switch control bracket for Triumph (pre-2016 - air-cooled). This simple ignition switch support enables you to relocate the ignition control between the fuel tank and the left carburetor. Fits on the right side on the injection models (EFI). It requires to move the wiring harness that is in your headlight, under the gas tank, without...

Front turn indicators bracket for Triumph

Front turn indicators bracket for Triumph 2

-35%

Triumph

Front turn indicators bracket for Triumph

€19.50 €30.00

Front turn indicators bracket / support for Triumph is simple, effective and very discreet. It enables you relocate your turn indicators under the steering column. It's stainless steel laser cut and satin black powder coated. It's particularly suitable for our Rectifier bracket for Triumph, or can be tightened on the upper fixation of the oil cooling...

View

Rear turn indicators brackets for Triumph (pre- 2016)

Rear turn indicators brackets for Triumph (pre- 2016) 2

-35%

Triumph

Rear turn indicators brackets for Triumph (pre- 2016)

€19.50 €30.00

Rear turn indicators support for Triumph (pre-2016 - air-cooled). Simple, effective and very discreet. It's manufactured out of stainless steel, laser cut (3mm thick) and satin black powder coat painted. It fits with any rear fender. Delivered without turn signals. This part isn't suitable for the original (or accessory) passenger grab bar.

Rear turn indicators brackets for Triumph

Rear turn indicators brackets for Triumph 2

-35%

Triumph

Rear turn indicators brackets for Triumph

€19.50 €30.00

Rear turn signals bracket for Triumph. Enables you to mount your turn signals on the upper shock absorber axles for a more discreet look. Compatible with the original passenger grab handle. Make sure to select the right model of motorcycle so you can receive brackets suitable for your motorcycle. Comes in pairs. Length: 50mm.

View

Universal gas tank leather belt

Universal gas tank leather belt 2

-20%

Parts

Universal gas tank leather belt

€100.80 €126.00

Universal leather gas tank strap / belt, fits with any gas tank with the cap on the side. It gives a distinguished look to your motorcycle tank and protects it from scratches. It comes wrapping your gas tank, is easy to assemble and is adjustable thanks to a metal buckle fastener. Maximum length 190cm, minimum length 107cm. This genuine leather tank...

View

Side leather saddlebag for Triumph (pre- 2016)

Side leather saddlebag for Triumph (pre- 2016) 2

-15%

Triumph

Side leather saddlebag for Triumph (pre- 2016)

€232.05 €273.00

Side leather saddlebag for Triumph (pre-2016 - air-cooled). This saddlebag is handcrafted in our workshop in the same leather as our seats. It enables you to transport some stuff and gives a retro distinguished look to your bike. It's available in Aged brown, gold, black leather. It comes mounting on a black satin painted aluminium plate that comes in...

View

1
2
3