Bonneville (2000-2016)

Showing 73-90 of 90 item(s)

Front mudguard for Triumph Bonneville (pre- 2016)

Front mudguard for Triumph Bonneville (pre- 2016) 2

Bonneville (2000-2016)

Front Long fender for Triumph Bonneville (pre-2016)

Long narrow front fender for Triumph Bonneville (pre-2016 - air-cooled). This fender can be mounted using the original mounting rods and offers a classic look. We use it in particular on our Triumph Bonneville 865 Dandy Bonnie model. Front fender made from stainless steel, designed and manufactured at the BAAK workshop in France. Narrower, shorter, less...

View

Front fender Scrambler for Triumph (pre-2016)

Front fender Scrambler for Triumph (pre-2016) 2

Triumph

Front fender Scrambler for Triumph (pre-2016)

High front fender Scrambler for Triumph (pre-2016 - air-cooled). Handmade, this high stainless steel front fender mounts to your Triumph's original lower triple clamp using the supplied mounting plate. It provides good protection and a pronounced off-road look to your machine. Available in Gloss Black, Brushed, Polished, Paint-ready - satin black epoxy...

View

Classic Medium front mudguard for Triumph

Classic Medium front mudguard for Triumph 2

-20%

Triumph

Front fender Classic Medium for Triumph

€96.00 €120.00

Time left

Classic Medium Front Fender for Triumph, made from stainless steel. The end mouldings give it a very elegant classic look. It is pre-drilled to fit the Triumph model of your choice. This Classic front fender is available in several finishes. Designed and manufactured by our craftsmen at the workshop in France. Dimensions: 400x140mm.Made in France

View

Short rear mudguard for Triumph (pre- 2016)

Short rear mudguard for Triumph (pre- 2016) 2

Triumph

Rear fender Heritage for Triumph (before 2016)

Rear fender Heritage for Triumph (pre-2016 - air-cooled) in stainless steel. Shorter than your original rear fender, it retains a shape respectful of your Triumph’s original spirit, cleaner while providing optimal protection against road spray. Equipped with a Vintage LED taillight (CE approved) with license-plate illumination, a rear plate bracket,...

View

Rear Classic fender for Triumph (pre-2016)

Rear Classic fender for Triumph (pre-2016) 2

-20%

Triumph

Rear Classic fender for Triumph (pre-2016)

€240.00 €300.00

Time left

This classic rear fender for Triumph (pre-2016) in stainless steel is handmade in France by our craftsmen. Its moulded tip gives it a finely worked look, with a classic spirit. It is shorter and more discreet than the original. This kit includes the pre-drilled fender for the selected motorcycle model, the stainless steel hardware kit, choice of turn...

View

Rear mudguard wiring harness for Triumph

Rear mudguard wiring harness for Triumph 2

Triumph

Rear fender wiring harness for Triumph

Rear fender wiring harness for Triumph. This wiring harness allows you to connect an aftermarket set of turn signals + tail light to your Triumph. It is plug & play with your machine’s original connectors; be sure to select the correct model. This harness is supplied as standard with our rear fenders for Triumph. Available in short and long lengths....

View

Headlight spacers

Headlight spacers 2

Parts

Headlight spacers

Brushed aluminum headlight spacers, allowing perfect adjustment of your headlight mounting on your headlight brackets. The diameter of the central hole is ø8mm, the outer diameter of the spacer is ø29mm. For Moto Guzzi V7 Classic / Heritage headlight, choose the 10mm size. For Triumph & Royal Enfield Classic / Heritage headlight, choose the 5mm...

View

Leather care cream

Leather care cream 2

Parts

Leather care cream

This leather care cream is a nourishing milk. It penetrates and feeds the leather. You can use it for your seats but also for any other leather item: shoes, jacket, gloves, leather saddlebags, etc. Capacity: 100 ml.

Clamps for exhaust wrap

Clamps for exhaust wrap 2

Parts

Clamps for exhaust wrap

This set of 8 self-locking stainless steel clamps will allow you to properly attach the heat wrap to your exhaust. Don’t tell us you were just going to do that with twisted wire. Supplied as 8 units.

Fork lowering shims for Triumph and Moto Guzzi

Fork lowering shims for Triumph and Moto Guzzi 2

-15%

Parts

Fork lowering shims for Triumph and Moto Guzzi

€16.15 €19.00

Time left

Short fork spring shims. To fit our short shocks and lower the front of your Triumph or Moto Guzzi proportionally, you will need these short fork spring shims. These shims are 2 cm shorter and replace the original shims.

View

Aluminium side covers for Triumph (pre- 2016)

Aluminium side covers for Triumph (pre- 2016) 2

-20%

Triumph

Classic side covers for Triumph (pre-2016)

€60.00 €75.00

Time left

Classic side covers for Triumph (pre-2016 - air-cooled), made from aluminium and available in Brushed or Satin Black finish. These covers replace your original plastic side covers. They give your machine a bolder look while concealing the air box. Supplied with the necessary mounting hardware. Available for right or left side.Made in France

View

Motogadget M-Tri for Triumph (pre- 2016)

Motogadget M-Tri for Triumph (pre- 2016) 2

Triumph

M-tri Motogadget control unit for Triumph (before 2016)

M-TRI multiplexing unit manufactured by Motogadget for Triumph Bonneville, Scrambler, Thruxton EFI from 2011 to present (electronic speedometer). Essential to remove the original speedometer, because without it the motorcycle will not start. This unit restores all original functions and allows fitting any speedometer. It is the unit used in the...

View

Monza type tank cap for Triumph

Monza type tank cap for Triumph 2

Triumph

Monza-style fuel cap for Triumph

Monza fuel cap for Triumph. The legendary Monza-style caps will fit your Triumph tank using our specific adapter. Compatible with new generation Triumphs (2016-...) and older generation (pre-2016 - air-cooled). The complete kit includes the adapter, sealing gasket, screws and the Monza cap. The Monza caps are made from aluminum, polished finish.Beware of...

Thermal wrap

Thermal wrap 2

Parts

Heat wrap

Here are 15 metres of 5cm-wide exhaust wrap to swaddle your exhaust and give you a BAD BOY look! For the black colour, it is strongly recommended to paint it with a high-temperature special paint; otherwise the colour will not hold long and your exhaust wrap will turn grey. Premium quality wrap — beware of low-cost imitations! The 8 stainless steel...

View

Turn signal bulbs 21W

Parts

Turn signal bulbs 21W

Transparent turn signal bulbs for mini turn signals, 21 Watt 12 Volt. Supplied in pairs.

Yellow H4 bulb

Yellow H4 bulb 2

Parts

H4 bulb (yellow)

Yellow H4 bulb for motorcycle headlight. This bulb fits any headlight originally equipped with an H4 bulb. It gives your machine's lighting a distinctly vintage look, without applying a filter to the headlight lens. This product preserves your machine's lighting qualities and is preferable to filters applied to the lens. Ideal for a backdating project.

2Win shock absorbers for Triumph (av. 2016)

2Win shock absorbers for Triumph (av. 2016) 2

Triumph

2Win shock absorbers for Triumph (before 2016)

2Win aluminum shocks for Triumph (before 2016 - air-cooled). These shocks are adjustable in spring preload and hydraulic damping. Each click of the dial changes compression and rebound damping simultaneously. Very easy to use, even while riding. If you choose shock lengths shorter than stock, we recommend our Short fork spring shims to proportionally...

View

Ø22mm handlebar rear view mirror

Ø22mm handlebar rear view mirror 2

Parts

Mirror adapter

Improve your visibility with our BAAK handlebar mirror adapters Discover BAAK solutions to mount your mirrors safely and with style. We offer two types of handlebar adapters, designed to meet different needs and motorcycle configurations: Handlebar adapter ø22mm: Ideal for fitting our BAAK mini mirrors in the under-handlebar position. This discreet and...

View

1
2
3
4