Parts Slip On Exhaust for Triumph (2016 ) €660.00 This pair of mufflers deliver the perfect sound without drone or being obnoxious. Made from aluminum in our workshop in France in a limited production. You won’t see them everywhere… Very easy to install with their bolt on design, goes directly on the factory system. Add to cart
Parts Large Leather Roll Top Pannier €897.00 Large Leather Roll Top pannier, carefully handcrafted by our leather worker for people who need pannier on their motorcycle but appreciate fine material and craftsmanship. The Rolled Top pannier is compatible with all SW-Motech SLC side carriers. (side carrier not supplied). Very detailed, this beautiful leather bag is made with BAAK leathers and suede... Add to cart
Parts Large Leather Messenger Bag €897.00 Discover our removable leather satchel, an exceptional piece meticulously handcrafted by our French artisans. Every detail is painstakingly executed, bearing witness to our commitment to quality. This exquisite leather goods creation is crafted from BAAK's top-quality vegetable-tanned leathers. Delivered with an adjustable and detachable strap, this... Add to cart
Triumph Short exhaust for Triumph (2016-2024) €1,220.00 Short Exhaust Line for Triumph T100 - T120 - Street Twin - Speed Twin 900 - Thruxton 1200 - Speed Twin 1200 (from 2016, liquid-cooled), designed and manufactured in our workshop. The headers are made of stainless steel, and the silencers are aluminum. This exhaust line delivers a deep, resonance-free sound that is not too loud. It is easy to install,... Add to cart
Bonneville Bobber (2017 -...) Exhaust silencers for Triumph Bobber (2017) €765.00 Short exhaust silencers for Triumph Bobber 1200 (2017-...), designed and manufactured at our workshop in France. The stainless steel adapters connect to your catalytic converter (or X-Pipe). The mufflers are manufactured out of aluminium, and available in Brushed or Mat Black finish. This pair of silencers provides a rough and deep sound, without... Add to cart
Parts Leather Conditioner €18.00 This leather conditioner is a nourishing milk. It penetrates and nourishes the leather. You can use it for your saddles but also for your other leather products : shoes, jackets, gloves, saddlebags, etc. It comes with all the seat we offer. Capacity : 100 ml. Add to cart
Parts Leather dye cream €24.00 This leather dye cream is a maintenance solution. It penetrates the leather and gives it a deep black tint. You can use it for your saddles but also for any other leather product: shoes, jackets, gloves, saddlebags, etc. Capacity: 200 ml. It's available for Black, Gold, Brown and Ruby (red) leather.Should be applied with a cloth, mixed with our... Add to cart
Triumph Rear mudguard for Bobber 1200 Triumph €495.00 Rear mudguard for Bobber 1200 manufactured out of stainless steel. Shorter than your original rear mudguard, it has an elegant raw look thanks to the molded edge at its end. You will still keep good protection against the rear wheel projections.Made in France Add to cart
Parts H4 Yellow bulb €12.00 Yellow H4 bulb for motorcycle lighthouse. This bulb adapts to any lighthouse equipped with an original H4 bulb. It allows you to provide the lighting of your machine with a resolutely vintage appearance, without affixing a filter on the window of your headlight. This product preserves the lighting qualities of your machine, to be favored with respect to... Add to cart
Triumph Tracker kit for Triumph Street Twin / T100 (2016) €6,600.00 Our craftsmen designed this kit to turn the Triumph Street Twin and Bonneville T100 (2016-...) into Trackers. Our work focused on the aesthetic asked as much as on the handling to make these machines more exciting. Compact, clear-lined, aggressive... Many superlatives that will make your machine stand out from the mass once this kit is assembled on. Build... Add to cart
Parts 21W turn indicators bulbs 209-405 €9.00 Transparent Mini Turn indicators bulbs, 21W, 12V. Comes in pair. Add to cart
Parts Exhaust wrap €93.00 Here are 15 meters (or 49') of exhaust wrap, 5 cm wide (1'' & 31/32), to wrap up your exhaust system and get the BAD BOY look you're aiming at! For the black color thermal wrap, we highly recommend you to paint it with an high temperature paint so the color can resist over the months. Available in Black or Beige color. This is high quality part,... Add to cart
Triumph 2Win shock absorbers for Triumph (2016) €466.00 2 Win aluminum shock absorbers for Triumph (liquid-cooled - since 2016). These shocks are adjustable in spring preload and hydraulic.Each click of the knob changes the setting of hydraulic compression and rebound simultaneously, it's very easy to use even while riding. Available in 340mm and 350mm length. Shock absorbers manufactured in aluminum in... Add to cart
Parts Stainless steel collars for exhaust wrap €24.00 This batch of 8 self-fruits in stainless steel will allow you to correctly attach the thermal strip to your exhaust. Don't tell us that you just go to do this with twisted thread. delivered by 8 units. Add to cart
Triumph 2Win shock absorbers for Triumph (pre-2016) €466.00 2Win aluminum shock absorbers for Triumph (before 2016 - air-cooled). These shocks are adjustable in spring preload and hydraulic. Each click of the knob changes the setting of hydraulic compression and rebound simultaneously, it's very easy to use even while riding. If you choose a shorter set than the original one, we recommend you to also go for our... Add to cart
Parts Universal 1 button control €200.00 Universal 1 push button handlebar control, manufactured out of machined aluminum and available for 22mm (7/8") or 25,4mm (1") diameter handlebar. The push buttons can be linked to any functions on the motorcycle. This part has a satin black powder coating, and is designed to be riveted to your handlebar. Diameter : 30mm (1 & 3/16") / Thickness : 17mm... Add to cart
Triumph Big Body shock absorbers for Triumph (2016) €642.00 We designed these aluminum shocks in order to give a stronger look and a better shocks absorption to the Triumph Modern Classic motorcycles. It's adjustable in hydraulic compression and rebound thanks to a single knob, which makes it really easy to use, even while riding. It's the largest shock absorbers you can find for these Triumph models (diam.... Add to cart
Parts Left 3-buttons universal switch €300.00 Universal handlebar controls, including :- an ON/OFF/ON turn signal switch- a push button for the horn- a push button for full headlights (may require adaptation of a relay) Available for 22mm (7/8") or 25,4mm (1") diameter handlebar. This part has a satin black powder coating, and is designed to be riveted to your handlebar. Add to cart
Triumph Big Body shock absorbers for Triumph (pre- 2016) €642.00 We designed these aluminum shocks in order to give a stronger look and a better shocks absorption to the Triumph Bonneville, Thruxton and Scrambler 865. It's adjustable in hydraulic compression and rebound thanks to a single knob, which makes it really easy to use, even while riding. It's the largest shock absorbers you can find for these Triumph models... Add to cart
Triumph Monza gas cap for Triumph €150.00 Monza gas cap for Triumph Modern Classics. The timeless design of this Monza cap will perfectly suit your gas tank thanks to our adapter. Only suitable for Triumph Modern Classics: Air cooled (2000-2016) and new Liquid Cooled (since 2016). The full kit is composed by the polished aluminium gas cap, a seal, the necessary mounting hardware and the adapter.... Add to cart
Triumph Motogadget M-Tri for Triumph (pre- 2016) €199.50 Multiplexing M-Tri box manufactured by Motogadget for Triumph Bonneville, Scrambler and Thruxton EFI since 2011 (equipped with digital speedometer). Essential to remove your original speedometer, because without it the motorcycle will not start. This M-tri enables you keep all all the original features of your speedometer, in order to fit any kind of... Add to cart
Universal Bates taillight €39.00 Bates type universal LED taillight for motorcycle. This universal black light can be assembled on your rear mudguard. The fixation enable you to adjust the angle of the taillight. Available with a black housing and your choice for the trim ring: satin black, brushed or chromed.ø50mm diameter. This taillight is EU approved. Add to cart
Triumph Classic aluminum side covers for Triumph (2016) €75.00 Classic side covers for liquid cooled Triumph (2016-...) designed and handcrafted in aluminum in our workshop in France. It replaces your original plastic side covers to bring a strongest look to your motorcycle, using noble material. Available for both left and right side. Comes with all the necessary stainless steel hardware. Available in Brushed or... Add to cart
Universal Old School taillight €69.00 Old school LED universal motorcycle taillight with integrated license plate lightning and license plate holder. Really discreet and effective. Measurement : 45mm diameter, 70mm depth. This taillight is EU approved. Add to cart
Triumph Classic aluminum side covers for Triumph (pre- 2016) €75.00 Classic aluminum side covers for Triumph (before 2016 - air-cooled), available in Brushed or powder coated in Satin Black. It replaces your original plastic side covers. These parts will bring a strongest look to your motorcycle, using noble material while hiding the airbox. Comes with the necessary mounting bracket and hardware, available for right side... Add to cart
Parts Vintage taillight €44.00 Vintage motorcycle universal taillight manufactured out of steel. This Ø65mm diameter LED light includes a license plate lightning under the light. Made in durable steel and then powder coated in black this tail light is available with or without the "STOP" brushed insert. Much more discreet than most of the factory taillights, and a will give your bike... Add to cart
Parts Turn indicators wiring harness for Triumph (2016) €29.00 This turn indicators wiring harness is necessary to fit new turn signals on your Triumph (2016-... I liquid cooled) without having to splice wires. This 160mm (6 &19/64") long wiring harness is plug and play on the original connectors of your motorcycle. This 160mm (6 &19/64") long wiring harness is perfect to achieve the assembly of aftermarket... Add to cart
Moto Guzzi Leather gas tank strap for Moto Guzzi V7III / V7 850 / V9 €135.00 Leather gas tank strap / belt for Moto Guzzi V7 III, V7 850 and V9. This strap enables you wrap your gas tank and give it a classy look. It's easy to assemble and as it simply wraps the gas tank and gets adjusted using the adjustment buckle on the nylon strap. Make sure to correctly choose your model of motorcycle so it perfectly fits. It's available in... Add to cart
Parts Universal Classic rear mudguard €348.00 Classic Universal rear mudguard manufactured out of stainless steel. Shorter than your original rear mudguard, it has an elegant raw look thanks to the molded edge at its end. You will still keep good protection against the rear wheel projections. Equipped with a LED taillight (CE approved for road use) with license plate lightning and a license plate... Add to cart
Triumph Rear mudguard wiring harness for Triumph €19.00 Rear mudguard wiring harness for Triumph. This wiring harness is necessary to connect an aftermarket set of turn indicators and taillight on your Triumph. It's plug & play over the factory connector, just make sure to select the right model. Comes standard with all the mudguards we sell for Triumph. Manufactured at BAAK's workshop in France. Add to cart
Universal Universal Heritage rear mudguard €486.00 Heritage Universal rear mudguard manufactured out of stainless steel. It keeps a classic spirit, but more purified than most of original mudguards while keeping a good protection against the rear wheel projections. Equipped with a LED taillight (CE approved for road use) with integrated license plate lightning and a license plate holder.Made in France Add to cart
Triumph Bates headlight bracket for Triumph Thruxton 1200 / Speed Twin €25.00 Bates headlight fixation bracket for Triumph Thruxton 1200 and Speed Twin. This bracket fits the lower fork triple trees of the Thruxton 1200 / Speed Twin and enables you mount any Bates headlight with a lower fixation on your motorcycle. Distance between the fixation holes axis : 113mm. 4mm thick machined aluminium. Satin black powder coat painting. Add to cart
Triumph Bates headlight bracket for wide triple trees for Triumph (2016) €25.00 This Bates headlight fixation bracket fits the Triumph Bonneville T100 / T120 / Street Twin / Street Scrambler new generation (2016-...) equipped with our Wide fork triple yokes for Triumph. It's manufactured out of 4mm thick machined aluminium. Satin black powder coat painting. Add to cart
Parts Universal Classic Medium front mudguard €114.00 Universal Classic Medium front mudguard, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's not pre-drilled so you can fit it on any model of motorcycle. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black, brushed and ready to... Add to cart
Triumph Classic rear mudguard for Triumph (2016 ) €300.00 Classic rear mudguard for Triumph (2016 - liquid-cooled) manufactured out of stainless steel. Shorter than your original rear mudguard, it has an elegant raw look thanks to the molded edge at its end. You will still keep good protection against the rear wheel projections. Equipped with a LED Bates taillight (CE approved for road use) with license plate... Add to cart
Parts Universal Classic Mini front mudguard €102.00 Universal Classic Mini front mudguard, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's not pre-drilled so you can fit it on the motorcycle of your choice. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black, brushed and ready... Add to cart
