New Products

Showing 1-54 of 54 item(s)

Large saddlebag support for short seat kit Triumph pre-2016

Home

Large saddlebag support for short seat kit Triumph pre-2016

Designed for our large removable rolled bags or satchel bags, this bracket is compatible with our short seat kit for Triumph (pre-2016). This bracket meets the need to install one or two large bags only if you have a BAAK short seat kit. The bracket can be easily screwed or unscrewed, so you don’t necessarily have to keep it permanently on your...

View

Kickstand Extension for Triumph Scrambler (pre-2016)

Home

Kickstand Extension for Triumph Scrambler (pre-2016)

€66.00

Say goodbye to the excessive lean of your Triumph Scrambler (before 2016). This kickstand extension increases the length of your original stand by 20 mm. It reduces the excessive tilt of the bike once parked and ensures better stability on all types of terrain. Almost essential if you have installed longer shock absorbers or larger tires than the original...

Bates headlight support - Triumph 1200 Bobber

Home

Bates headlight support - Triumph 1200 Bobber

€25.00

Bates headlight mounting bracket for Triumph Bobber 1200. This bracket attaches to the lower triple tree of the Triumph Bobber 1200. This allows for the installation of a lower-mount Bates headlight. Made of 4mm thick stainless steel. Satin black epoxy paint.

Triumph

Rear Brake Caliper Guard for Triumph

€36.00

Protect your rear brake caliper with this stainless steel guard, specially designed for Triumph motorcycles. Since the rear caliper of your Triumph is located below the wheel axle, it is naturally exposed to stone impacts during off-road riding and curbs in urban settings. This caliper guard has been specifically designed to cover the caliper and...

View

Headlight brackets for original headlights V7 III / V7 850 / V9

Headlight brackets for original headlights V7 III / V7 850 / V9 2

Parts

Headlight brackets for original headlights Moto Guzzi V7 III / V7 850 / V9

€129.00

Enhance the look of your Moto Guzzi V7 III, V7 850 or V9 with these machined aluminum headlight clamps, compatible with original LED and bulb headlights. With a length of 60 mm and 39-40 mm mounting clamps, they also allow the installation of adaptable turn signals. Finished in satin-black epoxy, they are supplied in pairs with stainless steel screws...

View

Moto Guzzi V7 850/V9 Skid Plate - Stainless Steel, Brushed or Black Satin

Moto Guzzi V7 850/V9 Skid Plate - Stainless Steel, Brushed or Black Satin 2

Parts

Engine protection for Moto Guzzi V7 850 - V9 (Euro 5)

€99.00

Protect your Moto Guzzi V7 850, or V9 (Euro 5 Starting 2021) engine with this stainless steel skid plate. Available in two finishes: brushed or sleek satin black epoxy paint. Durable, stylish, and easy to install with all necessary mounting hardware included. It’s the perfect combo of looks and practicality, keeping your bike safe while turning heads....

View

Side plate bracket for Triumph Bobber (2017)

Parts

Side plate bracket for Triumph Bobber (2017)

€95.00

Optimize the appearance of your Triumph Bonneville Bobber with this side license plate bracket. Featuring plate illumination and plug-and-play wiring, it ensures easy installation. Not compatible with the original mudguard, this bracket is tolerated by certain motorcycle inspection centers in France. Made in France

Front-turn-indicators-bracket-Triumph-Bobber-1200

Front-turn-indicators-bracket-Triumph-Bobber-1200 2

Parts

Front turn indicators bracket for Triumph Bobber 1200

€25.00

Turn signals brackets kit to relocate the indicators Triumph Bobber 1200 to visually lighten your motorcycle. The bracket comes on your oil-cooler.

View

Triumph

Rear mudguard for Bobber 1200 Triumph

€495.00

Rear mudguard for Bobber 1200 manufactured out of stainless steel. Shorter than your original rear mudguard, it has an elegant raw look thanks to the molded edge at its end. You will still keep good protection against the rear wheel projections.Made in France

View

License plate holder for US format with light mount

Parts

License plate holder for US format with light mount

€22.80

This license plate holder is suitable for US size license plates (horizontal). It's manufactured out of 3mm thick aluminium and it's satin black powder coat painted. This support allows you to mount a license plate light. This part is only suitable for BAAK license plate holders.

US license plate holder with tail light support

Parts

US license plate holder with tail light support

€22.80

This license plate holder is suitable for US format license plates (horizontal 170x100mm). It's made of 3mm thick aluminum, painted in satin black epoxy paint. This bracket must be purchased in addition to the original fender license plate support to convert it to fit USA plates. It's compatible with this Vintage Tail Light. Made in France

BAAK | Trail engine protection for Triumph T100/T120.

Parts

Trail engine protection for Triumph T100/T120

€145.00

Aluminium engine protection for Triumph T100/T120 (2016-…) with an adventurer look and for the best protection.

Replacement air filters for Triumph Bobber 1200 Airbox removal kit

Replacement air filters for Triumph Bobber 1200 Airbox removal kit 2

Bonneville Bobber (2017 -...)

Spare air filters for Triumph Bobber 1200 airbox removal kit

€69.00

This pack of spare air filters is suitable for our Airbox removal kit for Triumph Bobber 1200 (2017-...). It's composed of two air filters available in Brushed, polished and satin black. The air filters replacement routine on your motorcycle depends on how you use it along the year.

View

Triumph

Classic Mini front mudguard for Triumph

€108.00

Classic Mini front mudguard for Triumph, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. We drill holes on this mudguard according to the model of Triumph you choose. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black, brushed and...

View

BAAK black aluminium headlight brackets for motorcycles

BAAK black aluminium headlight brackets for motorcycles 2

Parts

Universal short headlight clamps for classic motorcycles

€129.00

Headlight bracket for motorcycles, for M8 side headlight fixation, with optional front turn indicators holders. Designed and manufactured at BAAK's in France. Perfect to put a BAAK headlight on your motorcycle and improve its finish level. Ø39 - 40mm for Moto Guzzi V7I / V7 II / V7 III / V7 850 / V9 (60mm size) Ø41 - 42mm for Triumph Bonneville T100 / SE...

View

Bonneville Bobber (2017 -...)

Mini front mudguard for Triumph Bobber

€210.00

Mini front mudguard for Triumph Bonneville Bobber (2017-...), manufactured out of stainless steel. This front fender is very short, it enables you get a more compact look on the front end of your motorcycle. It's pre-drilled and comes with its fixation bracket so it can be easily fitted on your Triumph Bobber. This front fender isn't suitable for the...

View

Classic mini front mudguard for Triumph Bobber

Bonneville Bobber (2017 -...)

Classic mini front mudguard for Triumph Bobber

€210.00

Classic Mini front mudguard for Triumph Bonneville Bobber (2017-...), manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled and comes with its fixation brackets so it can be easily fitted on your Triumph Bobber. This front fender isn't compatible with the models Bobber Black, Bobber TFC and...

Triumph

Rectifier bracket for Triumph (pre- 2016)

€30.00

Rectifier relocation bracket for Triumph (pre-2016 - air-cooled). This bracket enables you to relocate the voltage rectifier, in place of the horn. Then the horn can be attached below, on the same bracket. It's manufactured out of aluminum laser cut. You may be obliged to move the original wiring harness under the gas tank. All the necessary screwing...

Triumph

Rectifier / turn indicators / horn bracket for Triumph (pre- 2016)

€49.00

This bracket enables you to relocate your rectifier, front turn indicators and horn on a Triumph (pre-2016 - air-cooled) below your steering column. It visually lightens the line of the front of your motorcycle by grouping these parts on one bracket. This bracket is 21,8cm wide and 12cm high. It get assembled in the original place of your horn, under the...

License plate holder for original Moto Guzzi V9 fender

V9 (2016 -...)

License plate holder for original Moto Guzzi V9 fender

€168.00

License plate holder for original rear fender of Moto Guzzi V9. This bracket, painted in satin black epoxy, mounts directly in place of the original unit. It consists of a license plate holder, a round LED tail light (EU approved) with license plate illumination, a pair of indicator brackets of your choice, and a plug & play wiring harness.

View

License plate holder for Triumph Bobber original mudguard (2017)

Bonneville Bobber (2017 -...)

License plate holder for Triumph Bobber original mudguard (2017)

€180.00

License plate holder for the original mudguard of the Triumph Bonneville Bobber (2017-...). This taillight / license plate support unit comes in place of the original part. It's equipped with an EU approved LED vintage taillight with LED integrated license plate lightning, a license plate triangle, a plug & play wiring harness, optional turn...

View

Triumph

Side license plate holder for Triumph

€95.00

Side license plate support / holder for Triumph. It attaches to the upper axis of the left shock absorber. It comes with a connection wiring harness that makes it 100% plug and play. Satin black powder coat painting finish. If you choose the optional turn indicators, we'll provide the potential resistors necessary for their proper functioning according...

View

Moto Guzzi

Side license plate holder for Moto Guzzi

€95.00

License plate support / holder for Moto Guzzi. This part gets attached on the left upper shock absorber axis. It comes with a plug & play wiring harness. This support is satin black powder coat painted. If you choose the optional turn indicators, we'll provide the wiring harness and potential resistors necessary for their proper functioning according...

View

Triumph

Relocated ignition switch control bracket kit for Triumph (pre- 2016)

€49.00

Relocated ignition switch control bracket for Triumph (pre-2016 - air-cooled). This simple ignition switch support enables you to relocate the ignition control between the fuel tank and the left carburetor. Fits on the right side on the injection models (EFI). It requires to move the wiring harness that is in your headlight, under the gas tank, without...

Triumph

Front turn indicators bracket for Triumph

€30.00

Front turn indicators bracket / support for Triumph is simple, effective and very discreet. It enables you relocate your turn indicators under the steering column. It's stainless steel laser cut and satin black powder coated. It's particularly suitable for our Rectifier bracket for Triumph, or can be tightened on the upper fixation of the oil cooling...

View

Moto Guzzi

Front turn indicators bracket for Moto Guzzi V7 / V9

€30.00

Front turn indicators fixation bracket for Moto Guzzi V7 and V9, simple, effective and very discreet. It's stainless steel laser cut and satin black powder coat painted. It gets assembled on the upper regulator screw of your motorcycle. Sold without blinkers.

View

Triumph

Rear turn indicators brackets for Triumph

€30.00

Rear turn signals bracket for Triumph. Enables you to mount your turn signals on the upper shock absorber axles for a more discreet look. Compatible with the original passenger grab handle. Make sure to select the right model of motorcycle so you can receive brackets suitable for your motorcycle. Comes in pairs. Length: 50mm.

View

Moto Guzzi

Rear turn indicators brackets for Moto Guzzi

€30.00

Rear turn signals bracket for Moto Guzzi. Enables you to mount your blinkers / indicators on the upper shock absorber axles for a more discreet look. Comes in pairs. This part is available for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9.

View

Parts

Universal gas tank leather belt

€126.00

Universal leather gas tank strap / belt, fits with any gas tank with the cap on the side. It gives a distinguished look to your motorcycle tank and protects it from scratches. It comes wrapping your gas tank, is easy to assemble and is adjustable thanks to a metal buckle fastener. Maximum length 190cm, minimum length 107cm. This genuine leather tank...

View

Triumph

Engine protection for Triumph (pre-2016)

€115.00

Aluminium engine protection / sump guard for Triumph (pre-2016 - air-cooled), gives an aesthetic style to your motorcycle and a better protection to your engine. Easy to assemble, comes with stainless steel screws. This skid plate is made by BAAK Motocyclettes team at our workshop in France. We use it on most of our Triumph custom projects. Width : 170mm

View

Motorcycle mirror under handlebars round ø8 in steel

Parts

Motorcycle mirror under handlebars round ø8 in steel

€45.00

Mini black Ø80mm bike mirror especially designed to be mounted below the handlebar in lower position. It offers a very discreet look and a good rear visibility with its wide angle glass. Available without adapter (for Ø8mm through shaft mounting or with adapter for ø22mm handlebars). Sold individually. Fit both left and right sides, available in satin...

View

Triumph

Side number panel for Triumph (pre- 2016)

€120.00

Currently unavailable for sale Side number panel for Triumph (pre-2016 - air-cooled) manufactured out of aluminium. The number plate is placed on a side aluminium cover that comes to replace the original cover, with all the necessary stainless steel screwing system. Available for Right or Left side, with the side cover in Brushed or Satin black finish....

View

Aluminium handlebar grips for motocycles classic, vintage, cafe racer

Aluminium handlebar grips for motocycles classic, vintage, cafe racer 2

Parts

Motorcycle handlebar mounts, aluminum

€96.00

Machined aluminium handlebar clamps for motorcycle. These risers are available in ø22mm diameter, ø28,6mm diameter or 1 inch (ø25,4mm) diameter, it's lighter and elegant. The clamps are satin black powder coat painted, and come with stainless steel screwing (size on the choice). Designed and manufactured at BAAK's workshop. Made in France

View

Triumph

Tiny Motogadget speedo fixation bracket for Triumph (pre- 2016)

€49.00

Tiny Motogadget speedometer fixation bracket for Triumph (pre-2016). It's a machined aluminium bracket, satin black powder coated. This part comes with all the necessary screwing.

View

Triumph

Bates headlight plate for Triumph (pre-2016)

€169.00

Bates type headlight plate for Triumph (pre- 2016 - air-cooled). Essential to hide the steering column and all the cables after the mounting of a Bates headlight. Comes with 4 black leather clamps in black, aged brown, gold or ruby color. Available in satin black and raw aluminium finish. Measurements : 220mm x 190mm.

View

Triumph

Front mudguard fixation brackets for Triumph (pre- 2016)

€45.00

These stainless steel mudguard fixation bracket enables you to assemble the front fender of your choice on your Triumph Bonneville, Scrambler and Thruxton (before 2016 - air-cooled). They allow to adjust the height of the mudguard, it gets assembled on the original mudguard fixation. Product delivered by pairs.Made in France

Parts

Round mirror ø8 steel for motorcycle

€45.00

Mini round mirror, Ø8cm diameter with M8 threading, for upper position. The mirror shaft is 13cm long, its shape was specifically designed to guaranty a good rear visibility and a discreet look. Suitable for motorcycles with M10 screwing original mirrors fixation. Sold by unit, available in satin black only. Fit both left and right sides.

View

Parts

Leather cable guides

€8.00

Leather cable guide. This strap enables you fasten your cables, or tie it together to your handlebars. If just like us, your motorcycle's finish is part of your obsessions, this cable guide is perfect for your project. Available in Aged brown, Black and Gold leather. Available in 80mm, 90mm, 115mm or 130mm length. Each strap is 20mm wide. Sold as a...

View

Airbox removal kit for Triumph Bobber (2017)

Bonneville Bobber (2017 -...)

Airbox removal kit for Triumph Bobber (2017)

€225.00

This airbox removal kit for Triumph Bonneville Bobber (2017-...) enables you replaced the original plastic airbox by an elegant leather protection part and two air filters and a crankcase breather. The air filters and breather are available in polished, satin black and brushed version. Appart from the aesthetic aspect, this modification leads to a slight...

View

Triumph

Original turn indicators brackets kit for Triumph (2016)

€30.00

Turn signals brackets kit to relocate the factory or accessories indicators from Triumph that have keyed connection, to visually lighten your motorcycle. The front bracket comes on your oil-cooler, and the rear brackets come on the shock absorbers axles. These bracket kit comes without turn indicators.

View

Parts

BAAK N°1 handlebars Ø25,4mm

€159.00

Wide stainless steel BAAK N°1 handlebars in Ø25,4mm (1 inch). It's flatter, wider and has more pullback / sweep to the rider than most of the other handlebars. It will offer a very distinguished look to your motorcycle, and improve its handling qualities and your riding position. It's available in Satin black and Brushed finish. The stainless steel tubes...

View

Triumph

Scrambler front mudguard for Triumph (pre-2016)

€285.00

High front fender for Triumph (pre-2016 - air-cooled). This Scrambler look front mudguard is handcrafted out of stainless steel, and comes on the lower triple trees of your Triumph thanks to the provided black fixation bracket. It offers a good protection against the front wheel projections and a strong off road look to your motorcycle. Available in...

View

Triumph

Mini front mudguard for Triumph

€165.00

Mini front mudguard for Triumph, manufactured out of stainless steel. This front fender is very short, it enables you get a more compact look on the front end of your motorcycle. It's pre-drilled so you can easily fit it on your model of Triumph. It's designed and manufactured by our team at the workshop in France. It's available in satin black,...

View

Moto Guzzi

Mini front mudguard for Moto Guzzi

€165.00

Mini front mudguard for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9, manufactured out of stainless steel. This front fender is very short, it enables you visually lighten the front of your motorcycle. It's pre-drilled so it fits the original fixation system of your motorcycle. It's designed and manufactured by our team at the workshop in France. It's...

View

Parts

Universal Mini front mudguard

€114.00

Universal Mini front mudguard, manufactured out of stainless steel. This front fender is very short, it enables you visually lighten the front of your motorcycle. It's not pre-drilled so you can fit it on any model of motorcycle. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black,...

View

Moto Guzzi

Front fender Medium for Moto Guzzi

€165.00

Front fender Medium for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9, made of stainless steel. It is short but long enough to protect you from splashes from the front wheel. It is pre-drilled to fit the original fender mounting system. Designed and manufactured by our craftsmen in our workshop in France. Dimensions: 410x125 mm.Made in France

View

BMW

Medium front mudguard for BMW NineT

€285.00

Front fender Medium for BMW R 1200 NineT, made of stainless steel. It is short but long enough to protect you from splashes from the front wheel. It is pre-drilled and comes with its stainless steel mounting plate adapted to the selected model, as well as all necessary stainless steel hardware. Designed and manufactured by our craftsmen in our workshop in...

View

Parts

Universal Medium Front Fender

€114.00

Universal Medium Front Fender, made of stainless steel. It is short but long enough to protect you from splashes from the front wheel. It is not pre-drilled, so you can adapt it to any motorcycle. Designed and manufactured by our craftsmen in our workshop in France. Dimensions: 410x125 mm.Made in France

View

Parts

Universal Classic Mini front mudguard

€102.00

Universal Classic Mini front mudguard, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's not pre-drilled so you can fit it on the motorcycle of your choice. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black, brushed and ready...

View

Triumph

Classic Medium front mudguard for Triumph

€120.00

Classic Medium front mudguard for Triumph, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled so you can easily fit it on the Triumph model of your choice. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, brushed and ready to...

View

Triumph

Heritage rear mudguard for Triumph (pre- 2016)

€360.00

Heritage rear mudguard for Triumph (pre-2016 - air-cooled) manufactured out of stainless steel. It's shorter than your original Triumph rear mudguard, but it respects the original Triumph lines making it visually lighter, while keeping a good protection against the rear wheel projections. Equipped with a LED taillight (CE approved for road use) with...

View

BMW

Classic rear mudguard for BMW NineT

€375.00

Classic rear mudguard for BMW R 1200 NineT manufactured out of stainless steel. It has an elegant raw look thanks to the molded edge at its end. You will still keep good protection against the rear wheel projections. Equipped with a LED taillight (CE approved for road use) with license plate lightning, a rear license plate holder, rear turn indicators...

View

Batte headlight fixing for Moto Guzzi V9

Batte headlight fixing for Moto Guzzi V9 2

V9 (2016 -...)

Bates headlight bracket for Moto Guzzi V9

€25.00

Bates headlight mounting bracket for Moto Guzzi V9, required to install a bottom-mounted headlight (Bates type) on your bike. Made from 3mm thick aluminum with satin black epoxy paint. Only available in black finish. This bracket is included by default with our Bates headlight kits for Moto Guzzi V9. Delivered with the required stainless steel hardware.

Parts

Headlight struts

€22.00

Motorcycle headlight struts, manufactured out of aluminum, to perfectly adjust the position of your headlight. The hole diameter is ø8mm, the exterior diameter is ø29mm. For Moto Guzzi V7 Classic or Heritage headlight, choose the 10mm ones. For Triumph and Royal Enfield Classic or Heritage headlight, choose the 5mm ones. Comes in pairs.

View