New Products

Showing 1-24 of 43 item(s)

Large saddlebag support for short seat kit Triumph pre-2016

Home

Large saddlebag support for short seat kit Triumph pre-2016

Designed for our large removable rolled bags or satchel bags, this bracket is compatible with our short seat kit for Triumph (pre-2016). This bracket meets the need to install one or two large bags only if you have a BAAK short seat kit. The bracket can be easily screwed or unscrewed, so you don’t necessarily have to keep it permanently on your...

View

Remote Key Switch Bracket for Moto Guzzi V7 I / II / III

Home

Remote Key Switch Bracket for Moto Guzzi V7 I / II / III

€39.00

Remote switch bracket for Moto Guzzi V7 I / II / III. This kit allows you to relocate your key switch from its original position under the tank of your Moto Guzzi to simplify your cockpit. Relocating your key switch results in the loss of your motorcycle’s steering lock system.

Triumph

Rear Brake Caliper Guard for Triumph

€36.00

Protect your rear brake caliper with this stainless steel guard, specially designed for Triumph motorcycles. Since the rear caliper of your Triumph is located below the wheel axle, it is naturally exposed to stone impacts during off-road riding and curbs in urban settings. This caliper guard has been specifically designed to cover the caliper and...

View

Headlight brackets for original headlights V7 III / V7 850 / V9

Headlight brackets for original headlights V7 III / V7 850 / V9 2

Parts

Headlight brackets for original headlights Moto Guzzi V7 III / V7 850 / V9

€129.00

Enhance the look of your Moto Guzzi V7 III, V7 850 or V9 with these machined aluminum headlight clamps, compatible with original LED and bulb headlights. With a length of 60 mm and 39-40 mm mounting clamps, they also allow the installation of adaptable turn signals. Finished in satin-black epoxy, they are supplied in pairs with stainless steel screws...

View

License plate holder for US format with light mount

Parts

License plate holder for US format with light mount

€22.80

This license plate holder is suitable for US size license plates (horizontal). It's manufactured out of 3mm thick aluminium and it's satin black powder coat painted. This support allows you to mount a license plate light. This part is only suitable for BAAK license plate holders.

US license plate holder with tail light support

Parts

US license plate holder with tail light support

€22.80

This license plate holder is suitable for US format license plates (horizontal 170x100mm). It's made of 3mm thick aluminum, painted in satin black epoxy paint. This bracket must be purchased in addition to the original fender license plate support to convert it to fit USA plates. It's compatible with this Vintage Tail Light. Made in France

Royal Enfield

Rear turn indicators brackets for Royal Enfield

€30.00

Rear turn indicators holders for Royal Enfield. This pair of aluminium brackets will let you mount your turn indicators on the upper shock absorbers axles so it remains discreet. It's satin black high quality powder-coated so it resists over the years. Make sure to select the right model of motorcycle so you receive the holders that are suitable for your...

View

Triumph

Classic Mini front mudguard for Triumph

€108.00

Classic Mini front mudguard for Triumph, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. We drill holes on this mudguard according to the model of Triumph you choose. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black, brushed and...

View

BAAK black aluminium headlight brackets for motorcycles

BAAK black aluminium headlight brackets for motorcycles 2

Parts

Universal short headlight clamps for classic motorcycles

€129.00

Headlight bracket for motorcycles, for M8 side headlight fixation, with optional front turn indicators holders. Designed and manufactured at BAAK's in France. Perfect to put a BAAK headlight on your motorcycle and improve its finish level. Ø39 - 40mm for Moto Guzzi V7I / V7 II / V7 III / V7 850 / V9 (60mm size) Ø41 - 42mm for Triumph Bonneville T100 / SE...

View

Triumph

Rectifier bracket for Triumph (pre- 2016)

€30.00

Rectifier relocation bracket for Triumph (pre-2016 - air-cooled). This bracket enables you to relocate the voltage rectifier, in place of the horn. Then the horn can be attached below, on the same bracket. It's manufactured out of aluminum laser cut. You may be obliged to move the original wiring harness under the gas tank. All the necessary screwing...

Triumph

Rectifier / turn indicators / horn bracket for Triumph (pre- 2016)

€49.00

This bracket enables you to relocate your rectifier, front turn indicators and horn on a Triumph (pre-2016 - air-cooled) below your steering column. It visually lightens the line of the front of your motorcycle by grouping these parts on one bracket. This bracket is 21,8cm wide and 12cm high. It get assembled in the original place of your horn, under the...

Triumph

Side license plate holder for Triumph

€95.00

Side license plate support / holder for Triumph. It attaches to the upper axis of the left shock absorber. It comes with a connection wiring harness that makes it 100% plug and play. Satin black powder coat painting finish. If you choose the optional turn indicators, we'll provide the potential resistors necessary for their proper functioning according...

View

Moto Guzzi

Side license plate holder for Moto Guzzi

€95.00

License plate support / holder for Moto Guzzi. This part gets attached on the left upper shock absorber axis. It comes with a plug & play wiring harness. This support is satin black powder coat painted. If you choose the optional turn indicators, we'll provide the wiring harness and potential resistors necessary for their proper functioning according...

View

Triumph

Relocated ignition switch control bracket kit for Triumph (pre- 2016)

€49.00

Relocated ignition switch control bracket for Triumph (pre-2016 - air-cooled). This simple ignition switch support enables you to relocate the ignition control between the fuel tank and the left carburetor. Fits on the right side on the injection models (EFI). It requires to move the wiring harness that is in your headlight, under the gas tank, without...

Triumph

Front turn indicators bracket for Triumph

€30.00

Front turn indicators bracket / support for Triumph is simple, effective and very discreet. It enables you relocate your turn indicators under the steering column. It's stainless steel laser cut and satin black powder coated. It's particularly suitable for our Rectifier bracket for Triumph, or can be tightened on the upper fixation of the oil cooling...

View

Moto Guzzi

Front turn indicators bracket for Moto Guzzi V7 / V9

€30.00

Front turn indicators fixation bracket for Moto Guzzi V7 and V9, simple, effective and very discreet. It's stainless steel laser cut and satin black powder coat painted. It gets assembled on the upper regulator screw of your motorcycle. Sold without blinkers.

View

Triumph

Rear turn indicators brackets for Triumph (pre- 2016)

€30.00

Rear turn indicators support for Triumph (pre-2016 - air-cooled). Simple, effective and very discreet. It's manufactured out of stainless steel, laser cut (3mm thick) and satin black powder coat painted. It fits with any rear fender. Delivered without turn signals. This part isn't suitable for the original (or accessory) passenger grab bar.

Triumph

Rear turn indicators brackets for Triumph

€30.00

Rear turn signals bracket for Triumph. Enables you to mount your turn signals on the upper shock absorber axles for a more discreet look. Compatible with the original passenger grab handle. Make sure to select the right model of motorcycle so you can receive brackets suitable for your motorcycle. Comes in pairs. Length: 50mm.

View

Moto Guzzi

Rear turn indicators brackets for Moto Guzzi

€30.00

Rear turn signals bracket for Moto Guzzi. Enables you to mount your blinkers / indicators on the upper shock absorber axles for a more discreet look. Comes in pairs. This part is available for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9.

View

Parts

Universal gas tank leather belt

€126.00

Universal leather gas tank strap / belt, fits with any gas tank with the cap on the side. It gives a distinguished look to your motorcycle tank and protects it from scratches. It comes wrapping your gas tank, is easy to assemble and is adjustable thanks to a metal buckle fastener. Maximum length 190cm, minimum length 107cm. This genuine leather tank...

View

Triumph

Engine protection for Triumph (pre-2016)

€115.00

Aluminium engine protection / sump guard for Triumph (pre-2016 - air-cooled), gives an aesthetic style to your motorcycle and a better protection to your engine. Easy to assemble, comes with stainless steel screws. This skid plate is made by BAAK Motocyclettes team at our workshop in France. We use it on most of our Triumph custom projects. Width : 170mm

View

Motorcycle mirror under handlebars round ø8 in steel

Parts

Motorcycle mirror under handlebars round ø8 in steel

€45.00

Mini black Ø80mm bike mirror especially designed to be mounted below the handlebar in lower position. It offers a very discreet look and a good rear visibility with its wide angle glass. Available without adapter (for Ø8mm through shaft mounting or with adapter for ø22mm handlebars). Sold individually. Fit both left and right sides, available in satin...

View

Triumph

Side number panel for Triumph (pre- 2016)

€120.00

Currently unavailable for sale Side number panel for Triumph (pre-2016 - air-cooled) manufactured out of aluminium. The number plate is placed on a side aluminium cover that comes to replace the original cover, with all the necessary stainless steel screwing system. Available for Right or Left side, with the side cover in Brushed or Satin black finish....

View

Aluminium handlebar grips for motocycles classic, vintage, cafe racer

Aluminium handlebar grips for motocycles classic, vintage, cafe racer 2

Parts

Motorcycle handlebar mounts, aluminum

€96.00

Machined aluminium handlebar clamps for motorcycle. These risers are available in ø22mm diameter, ø28,6mm diameter or 1 inch (ø25,4mm) diameter, it's lighter and elegant. The clamps are satin black powder coat painted, and come with stainless steel screwing (size on the choice). Designed and manufactured at BAAK's workshop. Made in France

View