New Products

Showing 37-72 of 73 item(s)

Classic Mini front mudguard for Royal Enfield 650 Interceptor / Continental GT

Interceptor / Continental GT 650

Classic Mini front mudguard for Royal Enfield 650 Interceptor / Continental GT

Classic Mini front mudguard for Royal Enfield 650 Interceptor / Continental GT (2018-...), manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. We drill holes on this mudguard so it fits your motorcycle. This mudguard is available without or with risers kit (+10mm) if you want to mount a bigger tire on the...

View

Plate support for Royal Enfield 650 Interceptor / Continental GT

Plate support for Royal Enfield 650 Interceptor / Continental GT 2

Interceptor / Continental GT 650

License plate holder for Royal Enfield 650 Interceptor / Continental GT

€168.00

License plate holder for original Royal Enfield 650 Interceptor / Continental GT mudguard. Equipped with a taillight (CE approved), license plate lightning, compatible wiring harness and included turn indicators brackets to be mounted on your upper shock absorber axles or the license plate holder on choice. The EU approved LED taillight comes with its...

View

Interceptor / Continental GT 650

Bates headlight bracket for Royal Enfield 650 Interceptor / Continental GT

€25.00

Bates headlight fixation bracket for Royal Enfield 650 Interceptor / Continental GT, required to mount a lower fixation headlight (Bates style) on your motorcycle. Manufactured out of aluminium, 3mm thick, black powder coat painting. Available in black finish only. This bracket comes with all the necessary stainless steel screwing.

License plate holder triangle for Triumph Thruxton / Speed Twin 1200

Thruxton 1200 (2016 -...)

License plate holder triangle for Triumph Thruxton / Speed Twin 1200

€55.00

License plate holder triangle for rear fender eliminator kit of Triumph Thruxton 1200 or Speed Twin 1200 (2016-...). This support is dedicated to be assembled on the optional Rear fender removal kit offered by Triumph Motorcycles, or stands for a Short license plate holder for original rear fender on a Speed Twin. It enables you to remove the reflectors...

View

Triumph

Rectifier bracket for Triumph (pre- 2016)

€30.00

Rectifier relocation bracket for Triumph (pre-2016 - air-cooled). This bracket enables you to relocate the voltage rectifier, in place of the horn. Then the horn can be attached below, on the same bracket. It's manufactured out of aluminum laser cut. You may be obliged to move the original wiring harness under the gas tank. All the necessary screwing...

Triumph

Rectifier / turn indicators / horn bracket for Triumph (pre- 2016)

€49.00

This bracket enables you to relocate your rectifier, front turn indicators and horn on a Triumph (pre-2016 - air-cooled) below your steering column. It visually lightens the line of the front of your motorcycle by grouping these parts on one bracket. This bracket is 21,8cm wide and 12cm high. It get assembled in the original place of your horn, under the...

Triumph

Side license plate holder for Triumph

€95.00

Side license plate support / holder for Triumph. It attaches to the upper axis of the left shock absorber. It comes with a connection wiring harness that makes it 100% plug and play. Satin black powder coat painting finish. If you choose the optional turn indicators, we'll provide the potential resistors necessary for their proper functioning according...

View

Triumph

Relocated ignition switch control bracket kit for Triumph (pre- 2016)

€49.00

Relocated ignition switch control bracket for Triumph (pre-2016 - air-cooled). This simple ignition switch support enables you to relocate the ignition control between the fuel tank and the left carburetor. Fits on the right side on the injection models (EFI). It requires to move the wiring harness that is in your headlight, under the gas tank, without...

Triumph

Relocated ignition switch control bracket for Triumph (2016)

€30.00

Ignition switch control relocation bracket for Triumph (2016-... - liquid-cooled). It enables to relocate the ignition switch control under the gas tank. Manufactured in inox laser cut. You'll be obliged to relocate your wiring harness under your gas tank. Comes with all the necessary stainless steel screwing. The relocation of your ignition switch...

Triumph

Front turn indicators bracket for Triumph

€30.00

Front turn indicators bracket / support for Triumph is simple, effective and very discreet. It enables you relocate your turn indicators under the steering column. It's stainless steel laser cut and satin black powder coated. It's particularly suitable for our Rectifier bracket for Triumph, or can be tightened on the upper fixation of the oil cooling...

View

Triumph

Rear turn indicators brackets for Triumph (pre- 2016)

€30.00

Rear turn indicators support for Triumph (pre-2016 - air-cooled). Simple, effective and very discreet. It's manufactured out of stainless steel, laser cut (3mm thick) and satin black powder coat painted. It fits with any rear fender. Delivered without turn signals. This part isn't suitable for the original (or accessory) passenger grab bar.

Triumph

Rear turn indicators brackets for Triumph

€30.00

Rear turn signals bracket for Triumph. Enables you to mount your turn signals on the upper shock absorber axles for a more discreet look. Compatible with the original passenger grab handle. Make sure to select the right model of motorcycle so you can receive brackets suitable for your motorcycle. Comes in pairs. Length: 50mm.

View

Parts

Universal gas tank leather belt

€126.00

Universal leather gas tank strap / belt, fits with any gas tank with the cap on the side. It gives a distinguished look to your motorcycle tank and protects it from scratches. It comes wrapping your gas tank, is easy to assemble and is adjustable thanks to a metal buckle fastener. Maximum length 190cm, minimum length 107cm. This genuine leather tank...

View

Triumph

Engine protection for Triumph (pre-2016)

€115.00

Aluminium engine protection / sump guard for Triumph (pre-2016 - air-cooled), gives an aesthetic style to your motorcycle and a better protection to your engine. Easy to assemble, comes with stainless steel screws. This skid plate is made by BAAK Motocyclettes team at our workshop in France. We use it on most of our Triumph custom projects. Width : 170mm

View

Triumph

Engine protection for Triumph (2016-...)

€115.00

This sump guard / engine protection is manufactured out of stainless steel. It will give a stronger look to Triumph (2016-... - liquid-cooled). It's 1,5mm thick, and ensures a good protection to your engine against impacts and front wheel splashes. Available in Satin black or Brushed finish. It comes with all the necessary stainless steel screwing kit.

View

Motorcycle mirror under handlebars round ø8 in steel

Parts

Motorcycle mirror under handlebars round ø8 in steel

€45.00

Mini black Ø80mm bike mirror especially designed to be mounted below the handlebar in lower position. It offers a very discreet look and a good rear visibility with its wide angle glass. Available without adapter (for Ø8mm through shaft mounting or with adapter for ø22mm handlebars). Sold individually. Fit both left and right sides, available in satin...

View

Triumph

Side number panel for Triumph (pre- 2016)

€120.00

Currently unavailable for sale Side number panel for Triumph (pre-2016 - air-cooled) manufactured out of aluminium. The number plate is placed on a side aluminium cover that comes to replace the original cover, with all the necessary stainless steel screwing system. Available for Right or Left side, with the side cover in Brushed or Satin black finish....

View

Triumph

Side number panel for Triumph (2016)

€120.00

Currently unavailable for sale Side number panel for Triumph (2016-...) manufactured out of aluminium. The number plate is placed on a side aluminium cover that comes to replace the original cover, with all the necessary screwing system. Available for Right or Left side, with the side cover in Brushed or Satin black finish. Made in France

View

Aluminium handlebar grips for motocycles classic, vintage, cafe racer

Aluminium handlebar grips for motocycles classic, vintage, cafe racer 2

Parts

Motorcycle handlebar mounts, aluminum

€96.00

Machined aluminium handlebar clamps for motorcycle. These risers are available in ø22mm diameter, ø28,6mm diameter or 1 inch (ø25,4mm) diameter, it's lighter and elegant. The clamps are satin black powder coat painted, and come with stainless steel screwing (size on the choice). Designed and manufactured at BAAK's workshop. Made in France

View

Triumph

Tiny Motogadget speedo fixation bracket for Triumph (pre- 2016)

€49.00

Tiny Motogadget speedometer fixation bracket for Triumph (pre-2016). It's a machined aluminium bracket, satin black powder coated. This part comes with all the necessary screwing.

View

Triumph

Bates headlight plate for Triumph (pre-2016)

€169.00

Bates type headlight plate for Triumph (pre- 2016 - air-cooled). Essential to hide the steering column and all the cables after the mounting of a Bates headlight. Comes with 4 black leather clamps in black, aged brown, gold or ruby color. Available in satin black and raw aluminium finish. Measurements : 220mm x 190mm.

View

Triumph

Front mudguard fixation brackets for Triumph (pre- 2016)

€45.00

These stainless steel mudguard fixation bracket enables you to assemble the front fender of your choice on your Triumph Bonneville, Scrambler and Thruxton (before 2016 - air-cooled). They allow to adjust the height of the mudguard, it gets assembled on the original mudguard fixation. Product delivered by pairs.Made in France

Parts

Round mirror ø8 steel for motorcycle

€45.00

Mini round mirror, Ø8cm diameter with M8 threading, for upper position. The mirror shaft is 13cm long, its shape was specifically designed to guaranty a good rear visibility and a discreet look. Suitable for motorcycles with M10 screwing original mirrors fixation. Sold by unit, available in satin black only. Fit both left and right sides.

View

Parts

Leather cable guides

€8.00

Leather cable guide. This strap enables you fasten your cables, or tie it together to your handlebars. If just like us, your motorcycle's finish is part of your obsessions, this cable guide is perfect for your project. Available in Aged brown, Black and Gold leather. Available in 80mm, 90mm, 115mm or 130mm length. Each strap is 20mm wide. Sold as a...

View

Triumph

Original turn indicators brackets kit for Triumph (2016)

€30.00

Turn signals brackets kit to relocate the factory or accessories indicators from Triumph that have keyed connection, to visually lighten your motorcycle. The front bracket comes on your oil-cooler, and the rear brackets come on the shock absorbers axles. These bracket kit comes without turn indicators.

View

Triumph

Lowering kit for Triumph Thruxton 1200 / Speed Twin

€1,110.00

Aluminium upper triple trees kit for lowering, for Triumph Thruxton 1200 and Speed Twin (2016-...). This flat upper triple trees in machined aluminium has the same width as your original one but enables to lower the front end of your bike by 25mm without lifting up the fork tubes over the stock triple trees, for a perfect aesthetic result. Original...

View

Triumph

Scrambler front mudguard for Triumph (pre-2016)

€285.00

High front fender for Triumph (pre-2016 - air-cooled). This Scrambler look front mudguard is handcrafted out of stainless steel, and comes on the lower triple trees of your Triumph thanks to the provided black fixation bracket. It offers a good protection against the front wheel projections and a strong off road look to your motorcycle. Available in...

View

Triumph

Mini front mudguard for Triumph

€165.00

Mini front mudguard for Triumph, manufactured out of stainless steel. This front fender is very short, it enables you get a more compact look on the front end of your motorcycle. It's pre-drilled so you can easily fit it on your model of Triumph. It's designed and manufactured by our team at the workshop in France. It's available in satin black,...

View

Parts

Universal Mini front mudguard

€114.00

Universal Mini front mudguard, manufactured out of stainless steel. This front fender is very short, it enables you visually lighten the front of your motorcycle. It's not pre-drilled so you can fit it on any model of motorcycle. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black,...

View

Moto Guzzi

Front fender Medium for Moto Guzzi

€165.00

Front fender Medium for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9, made of stainless steel. It is short but long enough to protect you from splashes from the front wheel. It is pre-drilled to fit the original fender mounting system. Designed and manufactured by our craftsmen in our workshop in France. Dimensions: 410x125 mm.Made in France

View

Parts

Universal Medium Front Fender

€114.00

Universal Medium Front Fender, made of stainless steel. It is short but long enough to protect you from splashes from the front wheel. It is not pre-drilled, so you can adapt it to any motorcycle. Designed and manufactured by our craftsmen in our workshop in France. Dimensions: 410x125 mm.Made in France

View

Parts

Universal Classic Mini front mudguard

€102.00

Universal Classic Mini front mudguard, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's not pre-drilled so you can fit it on the motorcycle of your choice. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, glossy black, brushed and ready...

View

Triumph

Classic Medium front mudguard for Triumph

€120.00

Classic Medium front mudguard for Triumph, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled so you can easily fit it on the Triumph model of your choice. It's designed and manufactured by our team at the workshop in France. It's available in satin black, polished, brushed and ready to...

View

Triumph

Heritage rear mudguard for Triumph (pre- 2016)

€360.00

Heritage rear mudguard for Triumph (pre-2016 - air-cooled) manufactured out of stainless steel. It's shorter than your original Triumph rear mudguard, but it respects the original Triumph lines making it visually lighter, while keeping a good protection against the rear wheel projections. Equipped with a LED taillight (CE approved for road use) with...

View

Triumph

Bates headlight bracket for Triumph Thruxton 1200 / Speed Twin

€25.00

Bates headlight fixation bracket for Triumph Thruxton 1200 and Speed Twin. This bracket fits the lower fork triple trees of the Thruxton 1200 / Speed Twin and enables you mount any Bates headlight with a lower fixation on your motorcycle. Distance between the fixation holes axis : 113mm. 4mm thick machined aluminium. Satin black powder coat painting.

Parts

Headlight struts

€22.00

Motorcycle headlight struts, manufactured out of aluminum, to perfectly adjust the position of your headlight. The hole diameter is ø8mm, the exterior diameter is ø29mm. For Moto Guzzi V7 Classic or Heritage headlight, choose the 10mm ones. For Triumph and Royal Enfield Classic or Heritage headlight, choose the 5mm ones. Comes in pairs.

View