V7 III (2017 -...)

Showing 1-44 of 44 item(s)

Moto Guzzi

Big Body shock absorbers for Moto Guzzi V7 III / V9

Wide Big Body shock absorbers for Moto Guzzi V9 and V7 III. We developed these Ø80mm diameter shock absorbers in order to give a stronger look and better shock absorption skills to the Moto Guzzi V9 and V7 III. It's the largest shock absorbers you can find for this motorcycle. It's adjustable in hydraulic compression and rebound thanks to a single knob...

Monza type tank cap for motorcycle guzzi v7iii / v9

Monza type tank cap for motorcycle guzzi v7iii / v9 2

Moto Guzzi

Monza gas cap for Moto Guzzi V7III / V9

€150.00

Monza gas cap for Moto Guzzi V7 III and V9. The timeless design of this Monza cap will perfectly suit your gas tank thanks to our adapter. The full kit is composed by the polished aluminium gas cap, a seal, the necessary mounting hardware and the adapter. It doesn't have any lock system and simply opens by pushing on the opening button. It is only...

Moto Guzzi

Rear mudguard wiring harness for Moto Guzzi

€19.00

Rear mudguard wiring harness for Moto Guzzi. This wiring harness is essential to connect an aftermarket set of turn indicators and taillight on your Moto Guzzi. It's plug & play over the factory connector. This parts fit the Moto Guzzi V7, V7 II, V7 III, V7 850 and V9. It's available in Short and Long size. Subject to the right wiring length on your...

Bates headlight bracket for Moto Guzzi V7 III / V7 850

Bates headlight bracket for Moto Guzzi V7 III / V7 850 2

-35%

V7 III (2017 -...)

Bates headlight bracket for Moto Guzzi V7 III / V7 850

€16.25 €25.00

Bates headlight fixation bracket for Moto Guzzi V7 III et V7 850, required to mount a lower fixation headlight (Bates style) on your motorcycle. Manufactured out of aluminium, 3mm thick, black powder coat painting. Available in black finish only. This bracket comes with all the necessary stainless steel screwing.

Classic rear mudguard for Moto Guzzi V7 / V7 850

-10%

Moto Guzzi

Classic rear mudguard for Moto Guzzi V7 / V7 850

€270.00 €300.00

Time left

Classic rear mudguard for Moto Guzzi V7 I, V7 II, V7 III and V7 850, manufactured out of stainless steel. Shorter than your original rear mudguard, it has an elegant raw look thanks to the molded edge at its end. You will still keep good protection against the rear wheel projections. Equipped with a LED taillight (CE approved for road use) with license...

Classic Medium front mudguard for Moto Guzzi

-20%

Moto Guzzi

Classic Medium front mudguard for Moto Guzzi

€96.00 €120.00

Classic Medium front mudguard for Moto Guzzi V7 I, V7 II, V7 III and V7 850, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled so it fits the original fixation system of your motorcycle. It's designed and manufactured by our team at the workshop in France. It's available in satin black,...

Classic Mini front mudguard for Moto Guzzi

-20%

Moto Guzzi

Classic Mini front mudguard for Moto Guzzi

€86.40 €108.00

Classic Mini front mudguard for Moto Guzzi V7 I, V7 II, V7 III and V7 850, manufactured out of stainless steel. Its moulded edges at each end give it an elegant classic look. It's pre-drilled so it fits the original fixation system of your motorcycle. It's designed and manufactured by our team at the workshop in France. It's available in satin black,...

-20%

Moto Guzzi

Medium front mudguard for Moto Guzzi V7

€132.00 €165.00

Medium front mudguard for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9, manufactured out of stainless steel. It's short but it's still long enough to protect you from the front wheel splashes. It's pre-drilled so it fits the original fixation system of your motorcycle. It's designed and manufactured by our team at the workshop in France. It's available...

Rear turn indicators brackets for Moto Guzzi

-35%

Moto Guzzi

Rear turn indicators brackets for Moto Guzzi

€19.50 €30.00

Rear turn signals bracket for Moto Guzzi. Enables you to mount your blinkers / indicators on the upper shock absorber axles for a more discreet look. Comes in pairs. This part is available for Moto Guzzi V7 I, V7 II, V7 III, V7 850 and V9.

Front turn indicators bracket for Moto Guzzi V7 / V9

-35%

Moto Guzzi

Front turn indicators bracket for Moto Guzzi V7 / V9

€19.50 €30.00

Front turn indicators fixation bracket for Moto Guzzi V7 and V9, simple, effective and very discreet. It's stainless steel laser cut and satin black powder coat painted. It gets assembled on the upper regulator screw of your motorcycle. Sold without blinkers.

Parts

Mirror adapter

€15.00

Handlebar adapters, required to mount some mirrors on your handlebar. We offer two different solutions : Adapter for ø22mm handlebars, to mount our mirrors in underbar position (M10 threading) Through rod type adapter, to mount a mirror on a through rod type fixation in classic or underbar position

Parts

H4 Yellow bulb

€12.00

Yellow H4 bulb for motorcycle lighthouse. This bulb adapts to any lighthouse equipped with an original H4 bulb. It allows you to provide the lighting of your machine with a resolutely vintage appearance, without affixing a filter on the window of your headlight. This product preserves the lighting qualities of your machine, to be favored with respect to...

Parts

21W turn indicators bulbs

209-405

€9.00

Transparent Mini Turn indicators bulbs, 21W, 12V. Comes in pair.

Parts

Universal 1 button control

€200.00

Universal 1 push button handlebar control, manufactured out of machined aluminum and available for 22mm (7/8") or 25,4mm (1") diameter handlebar. The push buttons can be linked to any functions on the motorcycle. This part has a satin black powder coating, and is designed to be riveted to your handlebar. Diameter : 30mm (1 & 3/16") / Thickness : 17mm...

Parts

Left 3-buttons universal switch

€300.00

Universal handlebar controls, including :- an ON/OFF/ON turn signal switch- a push button for the horn- a push button for full headlights (may require adaptation of a relay) Available for 22mm (7/8") or 25,4mm (1") diameter handlebar. This part has a satin black powder coating, and is designed to be riveted to your handlebar.

-40%

Parts

Headlight struts

€13.20 €22.00

Motorcycle headlight struts, manufactured out of aluminum, to perfectly adjust the position of your headlight. The hole diameter is ø8mm, the exterior diameter is ø29mm. For Moto Guzzi V7 Classic or Heritage headlight, choose the 10mm ones. For Triumph and Royal Enfield Classic or Heritage headlight, choose the 5mm ones. Comes in pairs.

Parts

Tracker bar handlebars

€159.00

Tracker Bar handlebars, manufactured out of aluminium. This Tracker type handlebar has Ø28,6mm clamping diameter and Ø22mm controls diameter. It's 790mm wide. It offers much pullback to the rider which offers a comfortable riding position. It's available in satin black finish only.

-40%

Parts

Leather cable guides

€4.80 €8.00

Leather cable guide. This strap enables you fasten your cables, or tie it together to your handlebars. If just like us, your motorcycle's finish is part of your obsessions, this cable guide is perfect for your project. Available in Aged brown, Black and Gold leather. Available in 80mm, 90mm, 115mm or 130mm length. Each strap is 20mm wide. Sold as a...

Parts

Mini 21W turn indicators

€19.00

Mini 21W turn indicators manufactured out of plastic, with 21W bulb and M10 fixation threading. These turn indicators offer a very good finish level. Sold in pairs. EU approved for road use.

-15%

Parts

Round mirror ø8 steel for motorcycle

€33.15 €39.00

Mini round mirror, Ø8cm diameter with M8 threading, for upper position. The mirror shaft is 13cm long, its shape was specifically designed to guaranty a good rear visibility and a discreet look. Suitable for motorcycles with M10 screwing original mirrors fixation. Sold by unit, available in satin black only. Fit both left and right sides.

-15%

Parts

Bates headlight

€63.75 €75.00

Bates headlight for motorcycle. This low fixation Bates style headlight is ø15cm diameter. It has a metal casing and trim ring. It's discreet and enables you get a better finish level on your motorcycle. It's available in Chromed, Satin Black or with Black casing and Brushed or Chromed trim ring. It comes with the fixation bracket designed for the model...

Parts

Biltwell Renegade handlebars grips

€22.00

Biltwell Renegade handlebar grips, produced by Biltwell for character motorcycle. It offers a better handtaking of your handlebar, a great riding comfort and an incredible look. Handlebar diameter 1" (ø25,4mm) or ø22mm. Comes in pairs. Available in Black only.

-15%

Parts

Heritage headlight

€84.15 €99.00

Classic headlight for motorcycle. This M8 side fixation headlight has a ø180mm diameter. The casing and trim ring are metal, the window is plastic. It offers a great finish level, it's reduced casing (only 135mm deep) will offer a more compact look to your motorcycle. It's available with a Chromed or Brushed trim ring. Depending on the motorcycle model...

Parts

Biltwell Thruster handlebars grips

€22.00

Biltwell Thruster handlebar grips, manufactured by Biltwell for character motorcycle. It offers a better handtaking of your handlebar, a great riding comfort and an incredible look. Handlebar diameter 1" (ø25,4mm) or ø22mm. Comes in pairs. Available in Black and Brown color.

Parts

Leather covered handlebar grips

€145.00

Leather covered handlebars grips. Wrapped with a high quality leather, it gives a touch of chic to your motorcycle while keeping a good takeover. Available in aged brown, gold, black and ruby leather. Four thread stitchings colors available so it perfectly fits your bike. Available for ø25,4mm (1 inch) handlebars.

Aluminium handlebar grips for motocycles classic, vintage, cafe racer

Aluminium handlebar grips for motocycles classic, vintage, cafe racer 2

-40%

Parts

Motorcycle handlebar mounts, aluminum

€57.60 €96.00

Machined aluminium handlebar clamps for motorcycle. These risers are available in ø22mm diameter, ø28,6mm diameter or 1 inch (ø25,4mm) diameter, it's lighter and elegant. The clamps are satin black powder coat painted, and come with stainless steel screwing (size on the choice). Designed and manufactured at BAAK's workshop. Made in France

-15%

Parts

Classic headlight

€76.50 €90.00

Round headlight for classic motorcycles, with M8 side mount and ø180mm diameter. It features metal casing and bezel, with plastic glass, offering an exceptional level of finish. Its streamlined casing gives it a resolutely classic look. Depending on the motorcycle model chosen, a plug and play harness is supplied (which may justify a price difference...

-15%

Parts

Headlight bulb wiring extension

€16.15 €19.00

This headlight wiring harness bulb extension suits any motorcycle equipped with a H4 lighthouse bulb. It enables to connect your headlight to the motorcycle when you relocate the original wiring harness. Length : 420mm This headlight bulb extension is manufactured by ourselves at BAAK Motocyclettes workshop. It comes by default with all our headlight for...

-15%

Parts

Resistors for LED turn indicators

€12.75 €15.00

Resistors for LED motorcycles turn indicators, essential to get a correct blinking speed once your LED blinkers are mounted on a motorcycle that isn't equipped with LED ones in stock configuration. Comes in pairs. You need two pairs to connect both front and rear turn signals on your motorcycle.

Classic ø10 round aluminum motorcycle mirror

Classic ø10 round aluminum motorcycle mirror 2

-15%

Parts

Classic ø10 round aluminum motorcycle mirror

€54.40 €64.00

Classic round motorcycle mirror. This black mirror, Ø10cm / diameter, has an impeccable yet discreet finish. It offers perfect rearward visibility and fits any motorcycle. Height-adjustable thanks to 150mm articulated rod. Supplied with two adapters (left-hand and right-hand M10x1.25 mm). Additional adapters are available as options. Approved to European...

Motorcycle mirror under handlebars round ø8 in steel

Motorcycle mirror under handlebars round ø8 in steel 2

-15%

Parts

Motorcycle mirror under handlebars round ø8 in steel

€38.25 €45.00

Mini black Ø80mm bike mirror especially designed to be mounted below the handlebar in lower position. It offers a very discreet look and a good rear visibility with its wide angle glass. Available without adapter (for Ø8mm through shaft mounting or with adapter for ø22mm handlebars). Sold individually. Fit both left and right sides, available in satin...

Extension for Classic ø10 round motorcycle mirror in aluminium

Extension for Classic ø10 round motorcycle mirror in aluminium 2

-15%

Parts

Extension for Classic ø10 round motorcycle mirror in aluminium

€18.70 €22.00

Shaft extension for Classic round mirror. This extension is suitable only for our Classic round mirror. This part enables you make the mirror shaft longer for a better rear view, and makes it easier to adjust. This extension is 55mm long (35mm between holes). Supplied per unit.

Aluminium turn indicators holders for license plate

Aluminium turn indicators holders for license plate 2

-40%

Parts

Turn indicators holders on license plate

€18.00 €30.00

These aluminium turn indicators holders are designed to be assembled on a BAAK license plate holder, on the motorcycle of your choice. It's available in 3 different versions : For turn indicators with øM8 shafts For turn indicators with øM10 shafts For original / accessory Triumph turn indicators (2016-...) It comes with the necessary stainless steel...

-15%

Parts

License plate lightning

€15.30 €18.00

LED license plate lightning. This LED license plate lightning is approved according to the ECE European standards (12V / 2W). We use it on some license plate holders manufactured at BAAK's. Measurement of the license plate lightning : Length 17mm Diameter 12mm øM8 fixation shaft.

Leather handlebar pad for motorcycle (black, brown, red, gold)

Parts

Leather handlebar pad

€75.00

Leather-covered handlebar pad. Appart from the protection brought by this pad in case of shock with your handlebar, his leather cover will bring a classic off road look to your motorcycle. Our craftsmen re-interpreted the codes of off road bar pads to give it an aesthetic use. The inner diameter for the crossbar is ø12mm, the external diameter of the pad...

BAAK black aluminium headlight brackets for motorcycles

BAAK black aluminium headlight brackets for motorcycles 2

-35%

Parts

Universal short headlight clamps for classic motorcycles

€83.85 €129.00

Headlight bracket for motorcycles, for M8 side headlight fixation, with optional front turn indicators holders. Designed and manufactured at BAAK's in France. Perfect to put a BAAK headlight on your motorcycle and improve its finish level. Ø39 - 40mm for Moto Guzzi V7I / V7 II / V7 III / V7 850 / V9 (60mm size) Ø41 - 42mm for Triumph Bonneville T100 / SE...

Double optics headlight plate for motorcycles - BAAK

Double optics headlight plate for motorcycles - BAAK 2

Parts

Universal Trail headlight plate

€465.00

Our universal double optics headlight plate takes its inspiration from the 80's Trail universe. Perfect for a Scrambler project, this headlight plate is designed by our team and manufactured out of glass fiber. It includes a wiring harness extension and aluminium fixation brackets supposed to be assembled on the fork tubes (ø39 - ø40mm / ø41 - ø42mm /...

-15%

Universal

Universal handlebars controls kit

€168.30 €198.00

This Universal handlebars controls kit is essential to clear your cockpit. Each part of the kit must be purchased separately : Brake master cylinder Throttle Clutch lever This kit designed by our craftsmen shows a perfect finish level thanks to his assembly quality and satin black powder coat painting. These parts are available for classic and vintage...

Parts

Turn indicators / Brake light

€156.00

These minimalism aluminum turn signals keep your motorcycle clean. The rear indicators incorporate stop lights and lights. The front indicators are classic. Light is powerful. Stem øM8, 38mm long, ø22mm optical.

-20%

Parts

Flat Track handlebars Ø22mm

€72.00 €90.00

Flat Track handlebar ø22mm manufactured out of steel, it enables you to get a more comfortable driving position and a better look. This handlebar has much pullback to the rider, and his flat Track look will make your bike handle better. Available in Ø22mm diameter only, and in Chromed or Brushed finish.

Round handlebar mirror ø10 HIGHSIDER MONTANA-SLIM EVO SHORT

Round handlebar mirror ø10 HIGHSIDER MONTANA-SLIM EVO SHORT 2

Parts

Round Bar End mirror ø10 HIGHSIDER MONTANA-SLIM EVO SHORT

€84.00

Looking for a discreet, high-performance mirror? The HIGHSIDER MONTANA-SLIM EVO SHORT is for you. With a thickness of just 5 mm, a black anodized aluminum design and convex glass for optimum visibility, this mirror combines style and safety. Easy to install on handlebars from 12 to 22 mm, it complies with E standards for left- or right-hand use.

Bullet-type LED motorcycle turn indicators in black aluminum/brushed finish

Parts

Bullet-type LED motorcycle turn indicators in black aluminum/brushed finish

€78.00

Bullet-type motorcycle LED 10W turn signals in black aluminum with brushed trim combine elegance and efficiency. Featuring clear glass, they measure 20 mm in diameter and 36.5 mm in length. Mounting is simple, thanks to an M8mm screw fastener, and they are compatible with a 12 V system. Supplied sheathed and with ø3.2mm Japanese round crimped lugs....

Classic ø10 round motorcycle mirror in aluminum, long stem

Parts

Classic ø10 round motorcycle mirror in aluminum, long stem

€66.00

The Classic HIGHSIDER MONTANA XL round motorcycle mirror combines elegance and functionality with its timeless design. Its black anodized finish, combined with an extended 25 mm stem, offers enhanced rear visibility. Designed to improve ergonomics and guarantee a minimalist look, it's perfect for vintage and custom motorcycles. Sold individually.

Headlight brackets for original headlights V7 III / V7 850 / V9

Headlight brackets for original headlights V7 III / V7 850 / V9 2

-35%

Parts

Headlight brackets for original headlights Moto Guzzi V7 III / V7 850 / V9

€83.85 €129.00

Enhance the look of your Moto Guzzi V7 III, V7 850 or V9 with these machined aluminum headlight clamps, compatible with original LED and bulb headlights. With a length of 60 mm and 39-40 mm mounting clamps, they also allow the installation of adaptable turn signals. Finished in satin-black epoxy, they are supplied in pairs with stainless steel screws...