Front end & chassis

Showing 25-48 of 57 item(s)

Triumph

Regulator bracket for Triumph (after 2016)

Regulator bracket plate for Triumph (2016-...). This bracket allows you to relocate your regulator behind the radiator rather than on the upper triple clamp to visually streamline your machine. Made from stainless steel, laser-cut. Its installation requires relocating your wiring harness under the tank. Supplied without regulator, with the necessary...

Bracket for regulator / turn signals / horn for Triumph (pre-2016)

-20%

Triumph

Bracket for regulator / turn signals / horn for Triumph (pre-2016)

€39.20 €49.00

Time left

Bracket allowing you to mount your regulator, front turn signals and horn on a single bracket, for Triumph (pre-2016 - air-cooled). This accessory visually lightens the lines of your motorcycle by relocating these parts beneath the steering head. This bracket measures 21.8 cm wide and 12 cm high. It mounts to the original horn anchor point. This...

Contact switch relocation kit for Triumph (before 2016)

-20%

Triumph

Contact switch relocation kit for Triumph (before 2016)

€39.20 €49.00

Time left

Switch bracket for Triumph (pre-2016). This bracket allows the ignition switch to be moved between the fuel tank and the left carburetor. It mounts on the right on fuel-injected (EFI) models. Its installation requires relocating under the tank the wiring harness that is normally in the headlight, without having to lengthen any electrical cables....

Ignition switch relocator for Triumph (after 2016)

-20%

Triumph

Ignition switch relocator for Triumph (after 2016)

€24.00 €30.00

Time left

Key switch mounting plate for Triumph (2016-... - liquid-cooled). This bracket allows you to relocate your key switch under the tank. Made from laser-cut stainless steel. You will need to relocate your key switch wiring harness. Supplied with all required stainless steel fasteners. Relocating your key switch results in loss of your motorcycle's steering...

Triumph

Front turn signal bracket for Triumph

€30.00

Front turn signal bracket for Triumph, simple, effective and above all very discreet. Made of laser-cut stainless steel and painted in satin black epoxy. Matches our Regulator bracket for Triumph, or can be bolted to the upper mount of your oil cooler. This bracket is compatible with classic Triumphs older models (pre-2016) and newer models (2016-...)....

Parts

Fork gaiters in leather

€240.00

Pair of genuine leather fork gaiters. Handmade in France, they bring a touch of authenticity and distinction to your machine. These 4-, 5-, 6- or 8-pleat gaiters are water-repellent and specially treated to withstand intensive use. Available in several leather finishes. Diameter Ø41mm at the top and Ø63mm at the bottom. Supplied as a pair, with four...

View

Support for Motogadget Tiny speedometer for Triumph (before 2016)

-20%

Triumph

Support for Motogadget Tiny speedometer for Triumph (before 2016)

€39.20 €49.00

Time left

Tiny Motogadget speedo mounting plate for Triumph (pre-2016). This is a machined aluminium plate, satin black epoxy painted. Available in Above the steering stem position, or in the classic position in front of the handlebars. This accessory is supplied with the fasteners required for installation.

View

Headlight plate for Bates Triumph (before 2016)

-20%

Triumph

Headlight plate for Bates Triumph (before 2016)

€135.20 €169.00

Time left

Aluminium Bates-style headlight plate for Triumph (pre-2016 - air-cooled). Essential for a harmonious aesthetic behind a Bates headlight, it hides the steering column as well as all the cables. Supplied with 4 leather mounting straps in black / brown / gold or chocolate. Available in satin black and brushed aluminium finishes. Dimensions 220 x 190mm

View

Parts

Heritage headlight

€99.00

Heritage front headlight for motorcycle. This side-mount M8 headlight measures ø180mm in diameter. Bowl and bezel in metal, its lens is plastic. This headlight offers an exceptional level of finish; its flat bowl will give your machine a more compact look. It is offered with a Brushed or Chrome bezel. Our universal headlight protection grille fits this...

View

Classic Front Headlight ø180mm - Universal

Parts

Classic Front Headlight ø180mm - Universal

€90.00

Round front headlight for classic motorcycles, with M8 side mounting and a diameter of ø180mm. It features a metal bucket and bezel, with a plastic lens, providing an exceptional level of finish. Its profiled bucket gives it a decidedly classic look. Depending on the chosen motorcycle model, a plug-and-play wiring harness is supplied (which may explain a...

View

Parts

Bates front headlight

€75.00

Bates-style headlight for motorcycle. This lower-mounted headlight measures ø15cm in diameter. Bowl and rim in metal. Discreet, it enhances the machine's look. This headlight is available in Brushed, Chrome, Satin Black, or Satin Black with Brushed or Chrome rim. It is supplied with the mounting plate adapted to the chosen motorcycle model. EU approved.

View

Triumph

Classic headlight with integrated speedometer for Triumph (before 2016)

€840.00

Classic Headlight with Integrated Speedometer for Triumph (before 2016 - air-cooled) This needle speedometer, integrated into a Ø180mm satin black metal-shelled headlight with M8 side mounts, is the ideal way to visually lighten the front of your machine while retaining advanced functionality on your instrument. This speedometer is offered in a plug &...

View

Classic Headlight with Integrated Speedometer Universal

Parts

Classic Headlight with Integrated Speedometer Universal

€678.00

Classic headlight with integrated speedometer universal. The headlight with a satin black metal bowl of Ø180mm features M8 side mounts. Available with a headlight trim in Black, Brushed or Chrome. The speedometer is manufactured by Acewell. It is easily programmed according to your wheel diameter. Installing the speedometer requires motorcycle electrical...

View

Triumph

Bates headlight with integrated speedometer for Triumph (before 2016)

€650.00

Bates headlight with integrated motogadget Tiny speedo for Triumph (pre-2016 - air-cooled) Integrated into a Bates ø150mm headlight housing, this headlight with integrated speedo is a Plug & Play solution to tidy the cockpit while retaining the functions of your original instrument. This speedo is offered in a plug & play version and is supplied...

View

Triumph

Front fender mounting brackets for Triumph (after 2016)

€45.00

Front fender mounting brackets for Triumph (2016-... - liquid-cooled) in stainless steel. These mounting brackets allow you to adjust the height of your fender and guide cables along the fork. Particularly useful if you change the diameter of your front wheel. Supplied in pairs, fender not included. Made in France

View

Triumph

Front fender mounting brackets for Triumph (pre-2016)

€45.00

These stainless steel mounting brackets allow you to fit the fender of your choice to the fork of your Triumph Bonneville, Scrambler and Thruxton (pre-2016 - air-cooled). They allow adjustment of the fender height and mount in the original bracket locations. Product supplied in pairs.Made in France

Triumph

motogadget Tiny speedometer for Triumph (before 2016)

€689.00

motogadget Tiny speedometer for Triumph Bonneville, Scrambler or Thruxton (before 2016 - air cooled) This speedometer is a Plug & Play solution to clean up the cockpit while keeping the functions of your original instrument cluster. It is supplied with everything required according to the motorcycle model you select (mounting bracket, M-Tri...

View

Parts

Oval 3W Universal LED Turn Signals

€19.80

Universal oval LED turn signals in plastic with a total length of 60mm and M10 mounting stem. These turn signals feature a very nice finish, for a more discreet look than most stock indicators. They offer unbeatable value without compromising the style of your motorcycle. Sold in pairs. EU approved.

Triumph

Wide triple clamp kit for Triumph T100-T120 (after 2016)

€1,200.00

Wide triple tree kit for Triumph T100 / T120 (2016-... - liquid cooled), allowing fitment of a wide front tyre (3.50). The kit includes upper and lower triple trees widened by 20mm, the lower bearing, disc spacers, clamps and axle. It allows a 25mm lowering of the front. This kit is notably used on our Triumph Bonneville T120 Bobber. We recommend...

View

Turn signal bracket kit for original front and rear for Triumph (after 2016)

-20%

Triumph

Turn signal bracket kit for original front and rear for Triumph (after 2016)

€24.00 €30.00

Time left

Turn signal mounting kit allowing relocation of Triumph original and accessory turn signals that have a mounting locator, thereby streamlining the lines of your machine. The front bracket fits at the level of your oil radiator, the rear brackets on the upper shock absorber pivots. These brackets are sold without turn signals.

View

-15%

Triumph

Lowering kit for Triumph (After 2016)

€1,071.00 €1,260.00

Time left

Aluminium upper triple trees kit for lowering, available for Triumph Bonneville T100 / T120 / Street Twin (2016-... - liquid-cooled). It includes the flat upper triple tree, the handlebar clamps, the ignition switch and / or speedometer bracket, and the short Big Body shock absorbers. This lowering kit was designed and manufactured at our workshop. We...

View

Triumph

Front fender Scrambler for Triumph (pre-2016)

€285.00

High front fender Scrambler for Triumph (pre-2016 - air-cooled). Handmade, this high stainless steel front fender mounts to your Triumph's original lower triple clamp using the supplied mounting plate. It provides good protection and a pronounced off-road look to your machine. Available in Gloss Black, Brushed, Polished, Paint-ready - satin black epoxy...

View

-20%

Parts

Classic Mini Universal Front Fender

€81.60 €102.00

Time left

Classic Mini front fender universal, made from stainless steel. The molded edges at its ends give it a very elegant classic look. It is not pre-drilled, so you can fit it to the motorcycle of your choice. This Classic front fender is available in satin black, polished, glossy black, brushed and ready-to-paint (satin black epoxy) finishes. Designed and...

View

Classic Medium front mudguard for Triumph

-20%

Triumph

Front fender Classic Medium for Triumph

€96.00 €120.00

Time left

Classic Medium Front Fender for Triumph, made from stainless steel. The end mouldings give it a very elegant classic look. It is pre-drilled to fit the Triumph model of your choice. This Classic front fender is available in several finishes. Designed and manufactured by our craftsmen at the workshop in France. Dimensions: 400x140mm.Made in France

View